Change the VLAN ID on a group of ports on a vSS

Similar Questions

• FEATURE REQUEST: Change the image of a discussion group

  Greetings!

  It would be really nice to see the function to change the image of a group conversation I do in Skype. If it is already possible, I would ask you how, since I did not find in the settings of (Skype for Linux Alpha 1.7)

  Best regards!

  Hello
  
  We are conducting this task in our current sprint - stay tuned
  
  Nikola

• How to change the security policy of a group of distributed in a distributed virtual switch ports?

  Hello

  I am trying to write a Perl script that can modify the security policy of a group of distributed in a distributed virtual switch ports. I can access the values of security policy by using the following:

  
  

  $port_group_view-> config - > defaultPortConfig-> securityPolicy - > allowPromiscuous-> value

  $port_group_view-> config - > defaultPortConfig-> securityPolicy - > forgedTransmits-> value

  $port_group_view-> config - > defaultPortConfig-> securityPolicy - > macChanges-> value

  I try to use the method ReconfigureDVPortgroup_Task() of the managed object DistributedVirtualPortGroup. While creating a new instance of DVPortgroupConfigSpec, within the data spec config defaultPortConfig property object there is property of security policy and I couldn't find any other property pointing me to that I can update the security policy. I discovered that it is accessible via defaultPortConfig, stretching from VMwareDVSPortSetting where securityPolicy is a property of VMwareDVSPortSetting.

  What is the way to update? I am bit confused about terminology Extends and extended by and how it relates to the other.

  Concerning

  Akmal

  It is in DVPortgroupConfigSpec, but you will need to use the extended VMwareDVSPortSetting object.

  My $dvpg_spec = new DVPortgroupConfigSpec();

  $dvpg_spec-> {defaultPortConfig} = new VMwareDVSPortSetting();

  $dvpg_spec-> {defaultPortConfig} {securityPolicy} = new DVSSecurityPolicy();

  $dvpg_spec-> {defaultPortConfig} {securityPolicy} {allowPromiscuous} = new BoolPolicy (value-online 1, inherited-0 online);

  $dvpg_spec-> {defaultPortConfig} {securityPolicy} {forgedTransmits} = new BoolPolicy (value-online 1, inherited-0 online);

  $dvpg_spec-> {defaultPortConfig} {securityPolicy} {macChanges} = new BoolPolicy (value-online 1, inherited-0 online);

  You could probably simplify this by getting the config spec VGA and change it before using it in the ReconfigureDVPorgroup_Task() method.

• 11.1.1.3 spaces: how to change the screen spaces of public group

  Hello
  
  Does anyone know if and how the Group screen public spaces can be changed (this is the screen that shows a list of all group spaces available to the public)? It is located at the following URL relative to a clean install:
  
  /WebCenter/Oracle/WebCenter/webcenterapp/view/templates/publichtml/WCPublicGS.jsp

  you have a few options here... the more clean than the other...

  You can edit the jsp on your WLS Server page... It is not very clean and you have to whatch when you upgrade your webcenter. It's the best way to do. You should only know where the jsp:
  \servers\WLS_SPACES\tmp\_WL_user\webcenter\3qhhvl\war\oracle\webcenter\webcenterapp\view\templates\publichtml

  As said, it is not very clean...
  A better way to do this is to write your own taskflow, deploying and add it to the catalog of resources. You can create a public page were you drop this taskflow. This way you can create any page you want. There is a lot of work but most flexible.

  I don't think that there is a medium STANDARD of editing this page...

• How can I change the shortcut key for tab groups?

  CTRL + SHIFT + E is not exactly intuitive or easy to press. Is there a way to restore it to the previous Ctrl + space, or to simply re - link at will?

  • Panorama change shortcut: https://addons.mozilla.org/firefox/addon/change-panorama-shortcut/
  • Change search shortcut: https://addons.mozilla.org/firefox/addon/change-search-shortcut/

• Group of port and the naming convention for vLAN

  What is the naming convention better for groups of ports on vSwitches?  This naming convention should match how we name them VLAN on the physical switches and how important is that?

  Hi VMinator,

  To answer your question, he has not agreed to 'standard' for names of portgroup.  That's all what you're comfortable with the support and what works for you and your organization.  A bit like server names; Some companies are going hardcore with the naming conventions and others their name after the characters in science fiction or world of warcraft bosses

  Forensic science more you pack in a naming of the control standard more you have (i.e. for scripts, health check, etc. see below).  Also, if the name itself answers questions on his own and allows you to save a phone call that is priceless.  For example - the guys says unix... "Uh which network to choose for my new virtual machine.  My IP is blah blah blah. "Well, with right portgroup name, this question would have answered itself... and maybe even recorded some interruptions of service in other cases by the simple fact of being clear and effective in the communication of how this virtual device should work: purely expressed through an appropriate naming convention.

  Here's another one.  My last concert, we had thousands of virtual machines that had to move data centers and when they landed, they needed to change the IPs and start using 3 vNIC (instead of 1) on each virtual machine.  Each vNIC with a different subnet mask.  All support should be conducted by a team of outsourced with minimum experience of VMware.  The only way to support something like this and be effective is PowerCLI.  With just invited the naming convention only, you can perform various tasks such as query the virtual computer and check its settings of portgroup compared to its actual IP information in the operating system, initiate a ping from .NET to the virtual machine, if there is any questions Act automatically.  Some actions that will have to be performed include, for example, change the portgroup or mask on a set of clients;  Or questioning guests and glean information network (CDP, vSwitch, portgroup of information etc.) and compare observed network vs network expected enumerated in the PG naming convention. etc etc.  The list of actions that you can take are limited only by your creativity.  The naming standards give you effective power both in manual and automatic efforts.

  Still, notice of one man, but every site I care and feeding generally ends with a PG standard similar to what I first described above in my previous post.  Don't forget my example naming convention is Basic.  There are many other attributes that you can add (i.e. in vCloud deployments, in addition to the info network, you can choose to identify various features specific to vCloud org-networks, etc.).

  TBH just most of the companies have appointed VM-network exchanges (ok not bad) or some random shortname which doesn't help troubleshooting.  They are fairly easy to fix and also change over time, if necessary.  You can easily drag and drop a set of virtual machines (although I don't personally do this way) in the new port group (via the page of networking to CTRL + SHIFT + N) or PowerCLI it (Yes!  way to go).  Of course, always the ping tests before and after the change.  There are a lot of scripts out there (or ask master lucd post in PowerCLI VMTN forums).  If this is net-news, then you are ahead of the game and will have a standard to follow, whatever it is.

  Best of luck and have fun!

• Change the order of VLAN native?

  Can someone refresh me please as to what the command is to change the VLAN native for the whole switch? (IE: not only on the trunk, I mean the default native for the whole switch). Thank you

  Can someone please refresh me as to what the command is to change the Native VLAN for the entire switch? (IE: not just on the trunk, I mean the default native for the entire switch). Thanks

  Hi Steve,.

  By default, there is only one VLAN for all ports. This VLAN is called by default. You can't rename or delete VLAN 1.

  If you're talking about a management VLAN is nothing else than a VIRTUAL local network that is used for managing in-band of the network switching devices.  To configure this on a switch, you must create a Switch Virtual Interface (SVI) that is mapped to this VLAN, and then assign this virtual interface an IP address.  On a Cisco switch, it would look like the following.

  Interface Vlan99
  IP 192.168.1.1 255.255.255.0
  No tap

  I also want to make something very clear.  Your management VLAN is not to be identical to your VLAN native.  Question, please make sure that they are different.  Your management VLAN must only carry the traffic of in-band management and should not be the default VLAN.  By in-band management traffic, I am referring to SSH or telnet (Although telnet is not recommended because it is not safe).  Traffic such as BPDUS, PagP, CDP, use the VLAN native who is the vlan 1. But if you change the vlan native then CDP, VTP/PagP will always use the vlan 1 but packages will be marked. Only DTP uses vlan native so if you have changed the vlan native then DTP would use the new VLAN to send images. With PVST + BPDUS of course run on all the VLANS.

  Hope to help!

  So useful note the position

  Ganesh.H

• Why can't I change the management VLAN?

  This will sound like a newb question (but I'm used to COS not MISTLETOE), but how to change the vlan management on a SLM2048 and still have access to the GUI switch? The steps I use:

  (1) create a vlan (say vlan 2) / save the changes

  (2) add a non-tagging port (say, g2) to change vlan / save

  (3) change the vlan management to the vlan 2 in gui/save changes

  (4) physically to move my pc on port connection of vlan 2 (g2)

  (5) delete my cache arp (arp - d)

  (6) the switch switch in. ping or log not rspond pings 8 ^)

  What in the world could be missing (outside a few screws)?

  Thanks much for any help!

  
  This is going to sound like a newb question (but I'm used to COS not the GUI), but how do you change the managment vlan on a SLM2048 and still have access to the switch GUI?? The steps I'm using:
  1) create a vlan (say vlan 2)/save changes
  2) add a non-tagging port (say, g2) to the vlan/save changes
  3) change the management vlan to vlan 2 in the gui/save changes
  4) physically move my pc connection to the vlan 2 port (g2)
  5) delete my arp cache (arp -d)
  6) ping the switch or log in. switch doesn't rspond to pings 8^(
  What in the world could I be missing (besides a few screws)??
  Thanks very much for any help!
  
  

  Hello

  Check out the link to change the management vlan in SLM2048 below

  http://www.Cisco.com/en/us/docs/switches/LAN/csbss/slm2024/release/notes/SLM2024_SLM2048_RN_V1-0-1.PDF

  Hope to help!

  Ganesh.H

  Don't forget to note the useful message

• Using ISE to dynamic change of VLAN

  Hi all

  I need help to dynamically change the VLAN on each port of my Catalyst 3560, to do this, I don't want to use the MAC address filtering, but I want to use conditions already in place in my ISE to port between two VLAN (comments and Corporate) where they give free on the corporate LAN and the other Internet access LAN switch.

  Maybe someone of you had might have some ideas to do this using, or perhaps without VLAN?

  PS: Sorry for my bad English, I'm not native English ;)

  Thank you in advance.

  I don't understand exactly what you are looking for... But still

  The two types of access you plan can be achieved anyway

  Display the VLAN: as explained you... you must create two differnent authorization policies according to the users belonging to the Group of (AD) ...

  dACL: you can push downloadable ACLs to change according to the membership of users in AD.

  Let me know if you need help, design or configuration point of view...

• Changed the profile of TB OS update, same new messages keep downloading several times. Why?

  LinuxMint17, LinuxMint16 (erased hard disk and renistalled) was updated. Folder (including the profile of TB) restored successfully. Previous emails appear correctly, and new messages (POP) were recovered, but these same messages at least repeatedly, with each check "Get messages". Same problem on two different mail servers.

  Already more than 200 messages duplicated in under an hour! Close Thunderbird until I get a fix.

  I just found this article when you posted the link. When I tried to delete the files popstate.dat and could not do, I discovered the real problem:

  Somehow, when the backup program registered the Mail subfolder to the folder ~.thunderbird/e1aq0j8l.default , he set all files in this folder as root property, including the popstate.dat ones, which prevented the update of the POPstate of every server in Thunderbird.

  I changed the properties back to my group and user regular and everything works well.

• How can I change the owner of my newsgroup

  I need to change the owner of our discussion group (or add more admin group) for other users can remove users from the group. Currently the only person who can remove users from the group is the person who created the group. Any help much appreciated.

  Do try saw the cat Creator who has permissions "/ setrole [Skype Name] MASTER" for someone they would like to add as a mod

• How can I change the name of a homegroup?

  How to change the name of a residential group (do not change the name of the working group.)

  Greetings, nothing

  Arosa60

  I don't know that a homegroup has a name but makes your home network and it's perhaps the best hidden affecting never.  There may be other ways to change it but the only way I know is as follows: open the "network and sharing Center" and then left-click on the expansion of the icons both houses (the one under the words 'show your active networks'.  Click the icon, NOT the name of the network next to the icon.  That will bring up a dialog box where you can change the name.

• How to change the owner of the homegroup in Win 7?

  Hi all

  Homegroup on my home network is owned by a PC that is no longer present. (It was left accidentally on the roof of my car before a trip on the highway.) Now I would like to change the owner of the residential group to a PC, I still have.

  I have found no way to do this via the GUI Win 7 Pro. So I searched the registry for the name of the lost computer instances.

  HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\HomeGroup\UIStatusCache | ModifierSystem

  HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\HomeGroup\HME\Members | 18-3D-A2-1B-8D-70

  HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\HomeGroup\HME\Members | B4-99-BA-E3-0C-A1

  HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\HomeGroup\HME\Members | CC-52-AF-05-68-34

  HKEY_LOCAL_MACHINE\SYSTEM\ControlSet001\services\HomeGroupProvider\ServiceData | OwnerMachineName

  This site also contains the keys named owner (connection on OwnerMachineName) and OwnerId

  HKEY_LOCAL_MACHINE\SYSTEM\ControlSet001\services\HomeGroupProvider\ServiceData\Members\ | ComputerName

  HKEY_LOCAL_MACHINE\SYSTEM\ControlSet002\services\HomeGroupProvider\ServiceData | OwnerMachineName

  HKEY_LOCAL_MACHINE\SYSTEM\ControlSet002\services\HomeGroupProvider\ServiceData\Members\ | ComputerName

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\services\HomeGroupProvider\ServiceData\ | OwnerMachineName

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\services\HomeGroupProvider\ServiceData\Members\ | ComputerName

  It appears that the locations containing the trio owner, OwnerID, and OwnerMachineName are where the homegroup Control Panel gets its information on the existing homegroup. Other sites simply include the name of the computer as a member of the residential group, one of the peers.

  I tried to delete the key containing the name of the computer, but was prevented from doing: "error while deleting key." Could possibly pass the key owner to me or admins, but now wonder if there is a better way to do this.

  So I would like to change the owner of the homegroup, or erase any trace of an existing residential group then computers have to analyze the current reality. Is there a way?

  Thank you.

  Hello Chris,

  Thanks for posting your question on the Microsoft community.

  I would like to know some information about the problem so that we can help you better.

  What happens when you try to change the owner of your home group?

  I would suggest trying the following methods and check if it helps.

  Method 1:
  Let flow HomeGroup troubleshooter and check.
  Refer to this article:
  Open the homegroup troubleshooting utility
  http://Windows.Microsoft.com/en-us/Windows7/open-the-HomeGroup-Troubleshooter

  Method 2:
  Please use the suggestions contained in this help article and check the issue.
  Reference:
  Homegroup from start to finish
  http://Windows.Microsoft.com/en-us/Windows7/help/HomeGroup-from-start-to-finish

  Additional information:
  Homegroup: frequently asked questions
  http://Windows.Microsoft.com/en-us/Windows7/HomeGroup-frequently-asked-questions

  Windows 7 HomeGroup
  http://TechNet.Microsoft.com/en-us/library/ee449421 (v = WS.10) .aspx

  See also:
  Impossible to delete some registry keys - error while deleting key
  http://support.Microsoft.com/kb/2021860

  Note: Serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:
  http://Windows.Microsoft.com/en-us/Windows/back-up-registry

  I hope this information helps.

  Please let us know if you need more help.

  Thank you

• How to change the color of the brush?

  I chose art (calligraphic brush) on a layer, and I need to change its color. How can I do this using the SDK? Should what suite/function I use?

  You can use code like this to change the art path in a group art object:

  Sub StylePathArt (item AIArtHandle)

  {

  short type;

  sAIArt-> GetArtType(item,&type);)

  switch (type)

  {

  case kGroupArt:

  {

  AIArtHandle child = NULL;

  sAIArt-> GetArtFirstChild(item,&child);)

  While (NULL! = child)

  {

  StylePathArt (child);

  sAIArt-> GetArtSibling(child,&child);)

  }

  }

  break;

  case kPathArt:

  {

  AIPathStyle style;

  sAIPathStyle-> GetPathStyle (agenda, & style);

  style.strokePaint = true;

  style. Stroke.Color.Kind = kThreeColor;

  style. Stroke.Color.c.RGB.Red = 0;

  style. Stroke.Color.c.RGB.Green = 1.0;

  style. Stroke.Color.c.RGB.Blue = 0;

  style. Stroke.Width = 10;

  sAIPathStyle-> SetPathStyle (agenda, & style);

  }

  break;

  }

  }

  Alternatively, you can use the AIMatchingArtSuite to retrieve the path of an object of art group art objects.

• Remove the gray lines (not stoke) when changing the size.

  IM brand new to Illistrator, as well as my first project decided to redo my logo for my small minecraft server, since my original was Aussie brand quality.

  Now, I understand how to do what I wanted, im having the problem is when I change the size of my image grouped it creates gray lines between rectangle forms, there is no difference, if you zoom in as far as you can they disappear.

  I exported the PNG image and they still percist, attatched (upper right over original size I did)

  

  Screenshot of Illistraotr cs6

  

  Edit: I found that I could 'rasterize' my content selected as in a video montage 'render', I had no idea that I had to do this to "Finish" a vector image, more information about a better workflow would be always appreciated.