change the type of file azw3 to a document type

Similar Questions

• How can I change the type of image file to download on a site like walmart or walgreens for printing?

  How can I change the type of image file to download on a site like walmart or walgreens for printing?

  In general, they will accept the image in the format, that it was taken (if it was taken by the majority of cameras or cell phones).  But if so, you have a few options.

  The most simple and integrated solution is Microsoft Paint.  Yes it is from the 1980s, but it still works and changes of a good job for a time.  Just to right click on the photo file, choose open with and choose paint.  Then go to file > save as and save this return as the file type you want it to be (like PNG or BMP or JPG, quality declining in the JPG option).

  If you need more options like changing the quality he uses during conversion, another free option (of the very very many) is Paint.NET, an open source free image editing program. http://www.dotPDN.com/downloads/PDN.html

  There are also programs that can do it in bulk, so you can highlight 300 photos and do convert them all at once.  You can do this for free or with tools like Photoshop.

• ORA-1403 when change the type of file to APEX_APPLICATION_TEMP_FILES browser storage

  Hi all

  I'm new to APEX.  I use APEX 5.0 and try in site APEX Oracle using load data wizard to download the csv file.

  I managed to download data when the browser file storage type is obsolete WWV_FLOW_FILES.

  However, when I change the type of storage of Table APEX_APPLICATION_TEMP_FILES, system will prompt ORA-1403 when I click 'Next' to the Source of data loading page.

  Exception logging: Sqlerrm: ORA-01403: no Backtrace data: ORA-06512: at the "APEX_050000.WWV_FLOW_DATA_UPLOAD", line 564 ORA-06512: to the "APEX_050000.WWV_FLOW_PROCESS_NATIVE", line 975 ORA-06512: at the "APEX_050000.WWV_FLOW_PROCESS_NATIVE", line 1172 ORA-06512: to the 'APEX_050000.WWV_FLOW_PLUGIN', line 2017 ORA-06512: at the "APEX_050000.WWV_FLOW_PROCESS", line 188

  Someone able to guide how to diagnose this problem?

  Thank you, Dorothy

  DorothySG wrote:

  I'm new to APEX.  I use APEX 5.0 and try in site APEX Oracle using load data wizard to download the csv file.

  I managed to download data when the browser file storage type is obsolete WWV_FLOW_FILES.

  However, when I change the type of storage of Table APEX_APPLICATION_TEMP_FILES, system will prompt ORA-1403 when I click 'Next' to the Source of data loading page.

  Exception logging: Sqlerrm: ORA-01403: no Backtrace data: ORA-06512: at the "APEX_050000.WWV_FLOW_DATA_UPLOAD", line 564 ORA-06512: to the "APEX_050000.WWV_FLOW_PROCESS_NATIVE", line 975 ORA-06512: at the "APEX_050000.WWV_FLOW_PROCESS_NATIVE", line 1172 ORA-06512: to the 'APEX_050000.WWV_FLOW_PLUGIN', line 2017 ORA-06512: at the "APEX_050000.WWV_FLOW_PROCESS", line 188

  Someone able to guide how to diagnose this problem?

  It's bug #21478903: error when changing from APEX_APPLICATION_TEMP_FILES to download files

  Use the deprecated option for now.

• How to manually change the DNS zone files?

  I'm running OS X version 10.11.2 (El Capitan) and using App Server version 5.0.15 on a Mac Mini.

  I need to change the DNS Zone files manually because the DNS Server App Manager does not provide a U / I in order to add some elements (such as adding a delegation, etc.).  I use TextWrangler (5.0.2) as editor-in-Chief.

  I found an old post on how to do this here, but the information listed it seems obsolete.

  I was able to find the zone files to:

  / Library/server/name

  as:

  CBI .

  When I try to save or overwrite the db. files, or try to save all the files in that directory, I get an error indicating that:

  "Save the authenticated for this file failed (error application code: 20004).

  Since a window Terminal, if I go to that directory and type:

  Echo hello > temp.txt

  I get:

  Permission denied

  I am logged in using an administrator account.

  Before editing the db. files, I turned off the DNS in the App Server, then exit the server application server.

  What should I do to manually update the db. files?

  These files are protected from root.  You need to elevate your permissions to be able to change them.

  Probably you use a text editor like vi, nano or pico command line.  sudo vi/path/to/file for example.

  Back up the files first to protect against error.  In addition, be aware that Apple can run on some of your changes if you change the.app areas.

  Reid

  Apple Consultants Network

  Author of "El Capitan Server" - Foundation Services: available exclusively in Apple iBooks Store

  Author of "El Capitan Server - Collaboration & control": available exclusively in Apple iBooks Store

  Author of books of Yosemite server and server Mavericks

• How do I reselect the type to change.  I have a text template that I want to, but when I try to select it with the text tool always creates a new text layer.  How to change the type of the layer in my registered design?

  How do I reselect the type to change.  I have a text template that I want to, but when I try to select it with the text tool always creates a new text layer.  How to change the type of the layer in my registered design?

  OK, Bob. This give a try.

  First, open a new file and make sure the background is white, not on Transparent that I suspect you have currently defined.

  

  Then, type your copy. Your layers panel will then look like the top of this picture...:

  

  and when you drag the text on the image layer, it will look like the lower part of the sample above.

  You can then position the text layer with the tool move

• Question about changing the type of adapter during cloning with vmkfstools

  Hello world

  It seems to me have found stuck trying to use vmkfstools-i to clone a machine, in fact the command seems to work fine except that I would like to change the screen to type hard "ide" to "buslogic" drive adapter at the same time and this is where I am stuck. That's what I tried...

  vmkfstools-i < /path/to/oldmachine.vmdk > < /path/to/newmachine.vmdk > - a buslogic

  This command is cloning my machine but when I go to the newly created vmdk file ddb.adapter type is always set to "ide" not "buslogic". It seems that the '-a buslogic "directive is ignored, or I do not understand what it is supposed to do.

  Anyone know what I could do wrong?

  Thanks in advance.

  for a disc of data-rewrite of the line ddb.adapterType = in the vmdk descriptor is sufficient.

  For a boot disk, I would also rewrite the geometry of the disk.

  I took a few notes on this subject - see http://sanbarrow.com/vmdk-basics.html#changeadapter

  How to change the type of adapter to an existing vmdk

  A vmdk can be connected to different controllers
  -IDE
  Bus-controller-
  LSI-controller-
  -SAS-controller LSI-logic
  -new paravirtualised SCSI controller

  In the description of vmdk is affected in the parameter

  ddb.adapterType =

  The description of vmdk includes only three values: "ide", "buslogic", "free".
  For all the latest as the LSI controllers - SAS use 'free '.
  If you need to change the type of adapter of a disk that is used to start a prompt, it is recommended
  for also change the geometry of the disk-.
  If the disk is used only for data alignment is not necessary.
  Remember that the type of adapter to a virtual machine is also set up in the vmx file.
  So if you rewrite an IDE-SCSI-disk do not also forget to change / check the vmx file

  ide0:0. FileName = ' ide - disk.vmdk.

  TO

  scsi0. Present = 'true '.
  scsi0.virtualDev = "free".
  scsi0:0. Present = 'true '.
  scsi0:0. FileName = "changed - disk.vmdk."

  How to calculate the geometry of the disk

  There are several reasons why you want to manually calculate the geometry of the disk:
  -change the type of an existing vmdk adapter
  -create a vmdk to a dd-file description
  -create a description of vmdk to an img file as used by Starwind
  -create a vmdk to a description *-flat.vmdk when the original description is lost

  In all cases, we must firstly the nominal size of the disk in sectors.
  Find the size of the image file in bytes.

  / 512 =

  Then decide what type of geometry: IDE or SCSI

  For disks SCSI is the typical geometry * cylinders x 255 heads x 63 sectors

  DDB. Geometry.Cylinders = *.
  DDB. Geometry.Heads = "255".
  DDB. Geometry.sectors = "63".

  To calculate the number of cylinders
  / 16065 =
  When the vmdk using adapertype buslogic or free this formula is valid for all disks greater than 1 GB capacity

  For the typical geometry IDE drives is * cylinders x 16 heads x 63 sectors

  DDB. Geometry.Cylinders = *.
  DDB. Geometry.Heads = "16".
  DDB. Geometry.sectors = "63".

  To calculate the number of cylinders
  / = 1008
  When the vmdk using adapertype ide the maximum value for is 16383.
  For all over - 8 GB - capacity discs so you can use this geometry

  DDB. Geometry.Cylinders = "16383.
  DDB. Geometry.Heads = "16".
  DDB. Geometry.sectors = "63".

• Qosmio F10 - cannot change the type of HARD drive in the BIOS

  I want to change my hard drive, but the category in the BIOS is not editable.

  I can not change the type of hard drive in the BIOS on my desktop PC.

  Hello

  And you want to change in the BIOS now?
  I put t know which option you mean exactly

  The drive in the BIOS, you can change t. That's why you should buy a new

• Change the type of sensor pressure strain for SCXI-1314

  Hello!

  I would like to ask how to change the type of strain sensor.

  I use SCXI-1314 and one of my pressure sensor is a type of 4-wire. (Output 100mV, excitement: 10vdc)

  , but I want to replace the sensor by another type of current output type. (Output 4 ~ 20mV, excitement: 12-30Vdc)

  I checked the output voltage cable 4. (Defined as full-bridge OR max)

  Power + = Ex +.

  Food - = Ex-

  CH+        =  S+

  CH-         =  S-

  However, I don't know how to connect the type 2-wire with SCXI-1314.

  In addition, I don't have enough experience on the types of bridge (bridges and whole, quarter half)

  Can you explain what I need to do?

  One thing you migth try is to put a 5 Ohm resistor in the current loop. causing a drop in voltage 100mV on resistance, however check the soil conditions.  Since you will need a new calculation of sensitivty sensor anyway you can use a resistor 4.7 Ohm or 2 10 ohms in parallel... just find a good match between your 1314 input voltage range and the 4-20mA.

  And you will have an external power supply for the sensor.

• Can you change the type of device to 'USB Raw resource' to GPIB controller?

  I'm trying to configure a GPIB FL Contec GP - IB (USB) controller in MAX.  I could so he can register through the creation of a pilot of the Assistant driver VISA, but it fits as a "gross resource USB" rather than as a GPIB controller.  I can send and receive information from the controller, but it does give me an option to search for connected devices of GPIB communicate with them.  Is it possible to change the type of the device, maybe by manually changing the driver created by the wizard of the NI-VISA driver?  Thank you for your time.

  N ° do not use MAX at all. You can just create a GPIB-USB controller on your own. You should contact the seller.

• Change the type of serial number of UUT

  Hello

  I am a new user of Teststand and I would like to change the type of serial number to USE.

  or add condition number of the operator to write in the information of the object to measure dialog box.

  I want the serial number that have just number 20 and no letters.

  If the serial number is different, the dialog box should reappear as at the beginning.

  Hope that I was clear.

  Thank you

  You will need to replace the PreUUT callback and then build some sort of algorithm to verify the serial number desired.

  I've attached an example of how do.

• Update of cases in the structure of the case after having changed the 'Type of case.

  Hello

  After you change the "Type of business" (only one case has been deleted), I discovered that in cases of strcuture cases has become "damaged": case "named" have been changed to digital small (that is, 0, 1, 2, 3).

  Is there a way to den strcuture case?

  Thank you

  Pavel

  

  Right click on one of the enums greyed out and choose 'review and update of Type Def.  That should allow you to solve problems.

• How to change the type of insurance policy indicator on front panel

  Hello

  I want to change the type of digital indicator police led style. I have the police. But, how can I change the type of indicator of independent policy and not only not by changing the type of policy application. I checked the property node available are only color, size, justification, but type.

  Yoppy.

  Go

   

  LED > right mouse click > Create > property Node > Label > police > name

   

  then use (or)

   

  Digital > right mouse click > Create > property Node > digital text > police > name

  Kind regards.

   

• Change the Type of Interpolation of waveform graphic part

  Hello dear colleagues,

  How can I change the type of interpolation to a graph of waveform in part? Check the attached photo.

  I don't want yellow interpolation to the beginning of the measure.

  I know that the interpolation can be modified with the property node, but this has an influence on all points.

  Any idea?

  Thank you very much.

  

  Hi maximint,

  -NaN values used to hide unwanted in the plot points

  -use separate plots when you do not want the "edges" in land line

• How can I change the type of chassis in an existing CompactRIO project?

  Hello

  I have a built in LabView 8.2 for a chassis 9101 cRIO. Now, I want to bring to LabView 2009 and use it on a chassis of 9104. I would have thought this should be simple, but there is a VI on the FPGA itself. When you compile, I get the error "the device type that has been set up in this function does not match the actual type of the device. I don't want to have to remove the frame of the project & add it back (losing all the settings it can have) - is there a way just to change the type of target, but keeping the relevant parameters?

  Thanks for any help!

  Dave

  Hi Dave,.

  Once you've practiced it several times it is actually a piece of cake.

  Right click on the project select new target or device

  Rember just to specify rather than the current goal.

  Otherwise, you will have a conflict.

  The new target is initialized to the Ip (0,0,0,0) then re address assignment standard.

  Copy (drag) all the components for the new device (RT & FPGA if included)

  Note it's manual labor rather than you have to 'say' labview what material he must understand!

  concerning

  Xseadog

• Can I globally change the names of files and or directory to lowercase to uppercase?

  in Windows XP or in Windows 7, globally change the names of files and or directory to lowercase to uppercase?

  A single configuration change probably will not accomplish this.

  Your best bet is probably the freeware "Bulk Rename Utility" program which has a section dedicated to change the case of file names.

  Bulk Rename Utility: <> http://www.bulkrenameutility.co.uk/Main_Intro.php >

  HTH,
  JW

• Is possible to change the type of node WINS with cmd command on a windows operating system that is not joined to the domain?

  Is possible to change the type of node WINS with cmd command on a windows operating system that is not joined to the domain?

  Hello

  The question you posted would be better suited to the TechNet community. Please visit the link below to find a community that will provide the support you want.

   
  http://social.technet.Microsoft.com/forums/en-us/itprovistanetworking/threads
   

  Hope this information is useful.