Change the Type of Interpolation of waveform graphic part

Similar Questions

• Qosmio F10 - cannot change the type of HARD drive in the BIOS

  I want to change my hard drive, but the category in the BIOS is not editable.

  I can not change the type of hard drive in the BIOS on my desktop PC.

  Hello

  And you want to change in the BIOS now?
  I put t know which option you mean exactly

  The drive in the BIOS, you can change t. That's why you should buy a new

• Change the type of sensor pressure strain for SCXI-1314

  Hello!

  I would like to ask how to change the type of strain sensor.

  I use SCXI-1314 and one of my pressure sensor is a type of 4-wire. (Output 100mV, excitement: 10vdc)

  , but I want to replace the sensor by another type of current output type. (Output 4 ~ 20mV, excitement: 12-30Vdc)

  I checked the output voltage cable 4. (Defined as full-bridge OR max)

  Power + = Ex +.

  Food - = Ex-

  CH+        =  S+

  CH-         =  S-

  However, I don't know how to connect the type 2-wire with SCXI-1314.

  In addition, I don't have enough experience on the types of bridge (bridges and whole, quarter half)

  Can you explain what I need to do?

  One thing you migth try is to put a 5 Ohm resistor in the current loop. causing a drop in voltage 100mV on resistance, however check the soil conditions.  Since you will need a new calculation of sensitivty sensor anyway you can use a resistor 4.7 Ohm or 2 10 ohms in parallel... just find a good match between your 1314 input voltage range and the 4-20mA.

  And you will have an external power supply for the sensor.

• Can you change the type of device to 'USB Raw resource' to GPIB controller?

  I'm trying to configure a GPIB FL Contec GP - IB (USB) controller in MAX.  I could so he can register through the creation of a pilot of the Assistant driver VISA, but it fits as a "gross resource USB" rather than as a GPIB controller.  I can send and receive information from the controller, but it does give me an option to search for connected devices of GPIB communicate with them.  Is it possible to change the type of the device, maybe by manually changing the driver created by the wizard of the NI-VISA driver?  Thank you for your time.

  N ° do not use MAX at all. You can just create a GPIB-USB controller on your own. You should contact the seller.

• Change the type of serial number of UUT

  Hello

  I am a new user of Teststand and I would like to change the type of serial number to USE.

  or add condition number of the operator to write in the information of the object to measure dialog box.

  I want the serial number that have just number 20 and no letters.

  If the serial number is different, the dialog box should reappear as at the beginning.

  Hope that I was clear.

  Thank you

  You will need to replace the PreUUT callback and then build some sort of algorithm to verify the serial number desired.

  I've attached an example of how do.

• Update of cases in the structure of the case after having changed the 'Type of case.

  Hello

  After you change the "Type of business" (only one case has been deleted), I discovered that in cases of strcuture cases has become "damaged": case "named" have been changed to digital small (that is, 0, 1, 2, 3).

  Is there a way to den strcuture case?

  Thank you

  Pavel

  

  Right click on one of the enums greyed out and choose 'review and update of Type Def.  That should allow you to solve problems.

• How to change the type of insurance policy indicator on front panel

  Hello

  I want to change the type of digital indicator police led style. I have the police. But, how can I change the type of indicator of independent policy and not only not by changing the type of policy application. I checked the property node available are only color, size, justification, but type.

  Yoppy.

  Go

   

  LED > right mouse click > Create > property Node > Label > police > name

   

  then use (or)

   

  Digital > right mouse click > Create > property Node > digital text > police > name

  Kind regards.

   

• How can I change the type of chassis in an existing CompactRIO project?

  Hello

  I have a built in LabView 8.2 for a chassis 9101 cRIO. Now, I want to bring to LabView 2009 and use it on a chassis of 9104. I would have thought this should be simple, but there is a VI on the FPGA itself. When you compile, I get the error "the device type that has been set up in this function does not match the actual type of the device. I don't want to have to remove the frame of the project & add it back (losing all the settings it can have) - is there a way just to change the type of target, but keeping the relevant parameters?

  Thanks for any help!

  Dave

  Hi Dave,.

  Once you've practiced it several times it is actually a piece of cake.

  Right click on the project select new target or device

  Rember just to specify rather than the current goal.

  Otherwise, you will have a conflict.

  The new target is initialized to the Ip (0,0,0,0) then re address assignment standard.

  Copy (drag) all the components for the new device (RT & FPGA if included)

  Note it's manual labor rather than you have to 'say' labview what material he must understand!

  concerning

  Xseadog

• Is possible to change the type of node WINS with cmd command on a windows operating system that is not joined to the domain?

  Is possible to change the type of node WINS with cmd command on a windows operating system that is not joined to the domain?

  Hello

  The question you posted would be better suited to the TechNet community. Please visit the link below to find a community that will provide the support you want.

   
  http://social.technet.Microsoft.com/forums/en-us/itprovistanetworking/threads
   

  Hope this information is useful.

• Change the type of user account is not updated

  I changed my account type standard user principal and account invited to administrative yesterday. Now, I want to change it back but is not allow me to change my primary administrative standard. I can click on it, but it is not updated. What should I do to not having guest account my administrative account?

  Hello

  You receive an error message or code everything by trying to change the type of account?

  Note: Guest account cannot be defined as administrative account. There the option only to turn on or off.

  Reference: Change the type of user account

  http://Windows.Microsoft.com/en-us/Windows-Vista/change-a-users-account-type

  If there is an another account on your computer, and then log on to the administrative account and then try to change the account type.

  Method 1: Activate the default Administrator account, and then try to change the type of account and check if it helps:

  Enable and disable the built-in Administrator account

  http://TechNet.Microsoft.com/en-us/library/dd744293 (WS.10) .aspx

  Method 2: If the above mentioned method does not work then try the system restore:
  http://Windows.Microsoft.com/en-us/Windows-Vista/what-is-system-restore

• How to change the type of user account in the registry editor

  Hello.

  Can someone tell me how to change the type of user account in the registry editor

  Thanks in advance... :-)

  Kind regards
  Rambeau

  Hello.

  Can someone tell me how to change the type of user account in the registry editor

  Thanks in advance... :-)

  Kind regards
  Rambeau

  You can not. You need to do this via the control panel / accounts of users or via the command prompt. In both cases, you need to be logged in as an administrator account.

• in windows 7 I can't find a way to change the type of photo paper glossy

  in windows 7 I can't find a way to change the type of glossy photo example

  I have an epson r1800 and a 595 epson all in one help please

  I use photoshop elements 10

  original title: impression of the printer

  Perhaps the following links will propose a few ideas:

  Windows 7 - choice of print options
  http://Windows.Microsoft.com/en-us/Windows7/choosing-print-options

  Windows 7 - print a photo
  http://Windows.Microsoft.com/en-us/Windows7/print-a-picture

• I can not change the type of standard user to the admin account.

  I had a very difficult time, adding new accounts to the system.  Now that I have, I can not change the type of standard user to the admin account.

  As you don't declare that you tried, I am unable to say where you went wrong. Here is a method to promote the accounts without going through the various GUI screens:
  1 restart in SafeMode with network.
  2. log on as an administrator.
  3. click on start.
  4. type the three letters cmd in the search box.
  5. press on Ctrl + Shift + Enter
  6. click on "run as Administrator".
  7. type the following commands and press ENTER after each:
  NET user
  (This will show you all existing accounts)
  net localgroup administrators 'xxxx '.
  (This will encourage user xxxx to Administrator status. Replace xxxx with the correct name account).

• Compact virtual hard disk and change the type of drive in static

  Hi all

  I want to change the type of my dynamic static vm disk and now I want to compact the virtual hard disk memory for this virtual machine but I want to it without affecting the control points of this virtual machine that I created earlier. I use the SCVMM 2012 administration console. Any reg suggestions it will be useful.

  Thank you

  You should post your question in the following forum for help and appropriate responses:

  http://social.technet.Microsoft.com/forums/en-us/w7itprovirt

• How can I change the type of image file to download on a site like walmart or walgreens for printing?

  How can I change the type of image file to download on a site like walmart or walgreens for printing?

  In general, they will accept the image in the format, that it was taken (if it was taken by the majority of cameras or cell phones).  But if so, you have a few options.

  The most simple and integrated solution is Microsoft Paint.  Yes it is from the 1980s, but it still works and changes of a good job for a time.  Just to right click on the photo file, choose open with and choose paint.  Then go to file > save as and save this return as the file type you want it to be (like PNG or BMP or JPG, quality declining in the JPG option).

  If you need more options like changing the quality he uses during conversion, another free option (of the very very many) is Paint.NET, an open source free image editing program. http://www.dotPDN.com/downloads/PDN.html

  There are also programs that can do it in bulk, so you can highlight 300 photos and do convert them all at once.  You can do this for free or with tools like Photoshop.