Change the VCSA 5.5 sizing

Similar Questions

• How to change the opacity via Alt - Right Click brush sizing?

  Opacity is displayed as well as the diameter and hardness, when Alt - right click is done using a round brush (in this case, with the Dodge tool).

  

  I guess it's late, but I'm not a gesture that causes the opacity to change in this mode.  I have just the lack?  I tried all the modifier keys and moving the mouse all over the place.  I even tried the scroll wheel, but could not get the opacity to change.

  How can I change the opacity (outside the old traditional way)?

  -Christmas

  As far as I know, here's what you can do:

  Guinot

  On screen BRUSH RESIZE and HARDNESS/OPACITY

  Mac

  • Drag left/right = brush resizing: Opt-Ctrl + click - drag
  • Up/down = hardness of the brush drag: Opt + Cmd + Ctrl + click - drag
    (or opacity if the option is disabled)

  Windows

  • Drag left/right = brush resizing: Alt + right-click-drag
  • Up/down = hardness of the brush drag: Alt + shift + right-click-drag
    (or opacity if the option is disabled)

  Note: In Change Preferences > General you can uncheck vary the hardness of the round brush based on a vertical HUD movement if you want to change the opacity instead of hardness.

• Change the size of the window

  Hello

  I created a VI using LV8.0... When I run that in my computer screen size is OK. But when I try to run the VI on other computers and laptops, screen size is smaller, window of my VI fits on the screen... I'm unable to see all the controls and indicators. Can someone tell me how to change the size of the window so that it works on any computer with a std size...

  Concerning

  Nitzy

  Nitzy,

  You can configure your façade elements to resize with the façade. And you can set up your Panel before be enlarged, which means ' an application full screen. Together, these two settings may solve your problem.

  But be aware that sizing is no "analog" process, so propably you meet the gaps and overlaps between your controls.

  hope this helps,

  Norbert

  [EDIT] The two settings are in the settings of VI (Ctrl + I).

• How to change the original settings?

  Ladies and gentlemen,

  Pretty simple question here. I VI, where the original glue to bottom (I created this by placing the divisor, change the settings for the two, then remove it):

  

  How to change this default behavior 'Glue to Top' without placing the divider again?

  In other words - where is the "Pane sizing" option for the part of the front panel of the "root":

  

  Thank you in advance,

  Andrey.

  Right click on the scroll bar, and you will have a panel calibration menu item.

• Cannot change the size of icons on the screen

  Original title: change the size of the icons?

  I had a 256 x 256 icons (+ a few small icons 128 x 128). They are partially transparent. I have an external hard drive connected to my computer. It contains several folders and I gave some of the folders of custom icons. However, I can put is more properly custom folders icons. Although the files are 256 x 256 (I tried many programs and converters and windows says they are 256 x 256) the size of the icons on the screen is small and there is a gray lines around the area.

  If I hold down the Ctrl key and use the mouse wheel, they get smaller and then back to their maximum size, but not as large as I want. The old icons/folders are set correctly.

  Hi UnknownAsker,

  Is this a recent problem? If so, restore the computer to an earlier date when the sizing worked properly. This document includes the steps.

  Did you of recent changes to the computer as added/removed material or software, including updates? Start your computer in a clean boot. This will let us know if the problem is caused by a software conflict.

  Let us know if that helps.

• Everything on the screen went super-sized! How can I restore back to normal?

  Everything on the screen went super-sized! How can I restore back to normal?

  * original title - Super-sized icons, cursor, etc. ! *

  Hello

  There are a number of things to try:

  try going to your graphic card manufacturers site or computer and are looking for the driver download section

  Search your computer or graphics card model number based on what you have and download and install the latest graphics drivers for vista

  then try to make the screen of solution of problems

  http://Windows.Microsoft.com/en-us/Windows-Vista/change-screen-resolution

  Change the screen resolution

  __________________________________________________________

  or try a restore of the system before this happened

  http://www.windowsvistauserguide.com/system_restore.htm

  If necessary do in safe mode

  Windows Vista

  Using the F8 method:

  1. Restart your computer.
  2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
  3. Select the Safe Mode option with the arrow keys.
  4. Then press enter on your keyboard to start mode without failure of Vista.
  5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
  6. Do whatever tasks you need and when you are done, reboot to return to normal mode.

• How to change the Source with EditText text in my Script?

  Here is my code, actually, the thing is I want to change my myEditText text in my control panel:

  function myScript(thisObj) {
            function myScript_buildUI(thisObj) {
                      var myPanel = (thisObj instanceof Panel) ? thisObj : new Window("palette", "My Panel Name", [0, 0, 300, 300]);
  
                      res="group{orientation:'column', alignment:['fill', 'fill'], alignChildren:['fill', 'fill'],\
                                myEditText: EditText{text:'EditText text'},\
                                myButton: Button{text:'Button Name'},\
                      }"
  
                      //Add resource string to panel
                      myPanel.grp = myPanel.add(res);
                      
                      
                      var texto = myPanel.grp.myEditText.text.value
                      
                      var btn =  myPanel.grp.myButton
                      
                      
                      
                      btn.onClick = function (){
                          
                          app.project.item(2113).layer("TXT 1").property("Text").property("Source Text").setValue = texto
                          
                          }
                      
                      
                      
                      
  
  
                      //Setup panel sizing and make panel resizable
                      myPanel.layout.layout(true);
                      myPanel.grp.minimumSize = myPanel.grp.size;
                      myPanel.layout.resize();
                      myPanel.onResizing = myPanel.onResize = function () {this.layout.resize();}
  
                      return myPanel;
            }
  
  
            var myScriptPal = myScript_buildUI(thisObj);
  
  
            if ((myScriptPal != null) && (myScriptPal instanceof Window)) {
                      myScriptPal.center();
                      myScriptPal.show();
                      }
            }
  
  
            myScript(this);
  

  Something like this should work:

  function myScript(thisObj) { 
  
    var textStr = "";
  
    function myScript_buildUI(thisObj) {
  
    var myPanel = (thisObj instanceof Panel) ? thisObj : new Window("palette", "My Panel Name", [0, 0, 300, 300]);  
  
    res = "group{orientation:'column', alignment:['fill', 'fill'], alignChildren:['fill', 'fill'],\
    myEditText: EditText{text:'EditText text'},\
    myButton: Button{text:'Button Name'},\
    }"
  
    //Add resource string to panel
    myPanel.grp = myPanel.add(res);
  
    // I added the next two lines.
    textStr = myPanel.grp.myEditText.text;
    myPanel.grp.myEditText.onChange =  myPanel.grp.myEditText.onChanging = textStringUpd;
  
    myPanel.grp.myButton.onClick = function (){
  
    app.project.item(2113).layer("TXT 1").sourceText.setValue(textStr);
    //or tell the script to change the soureText property of the currently selected layer (remove the two slashes from the line below and add them to the line above)
    //app.project.activeItem.selectedLayers[0].sourceText.setValue(textStr);
  
    }
  
    //Setup panel sizing and make panel resizable
    myPanel.layout.layout(true);
    myPanel.grp.minimumSize = myPanel.grp.size;
    myPanel.layout.resize();
    myPanel.onResizing = myPanel.onResize = function () {this.layout.resize();}
  
    return myPanel;
  
    }  
  
    var myScriptPal = myScript_buildUI(thisObj);
  
    // I added this function.
    function textStringUpd() {
  
    textStr = this.text;
  
    }
  
    if ((myScriptPal != null) && (myScriptPal instanceof Window)) {
              myScriptPal.center();
    myScriptPal.show();
    }
    }  
  
  myScript(this);
  

  I've added comments to indicate the changes that I made

• Cannot access the vCSA 5.5 with the local root account

  We are upgrading from 5.0 to 5.5 U2 ESXi. By the checklist, I first upgraded vCSA to 5.5.

  The vCSA 5.5 upgrade gives me connection problems. I can connect to the admin of vSphere GUI (port 5480) and web client (port 9443) using the local account "root". However if I try to access it from an application (IE VUM or Backup Exec) vCSA credentials of the root get rejected (as if I use the username/password wrong name). No idea why? FYI, we are using Active Directory and embedded DB & SSO. I attach a screenshot of the summary page.

  Thank you! :-)

  If it was working earlier and you have changed the domain by default to a good AD/LDAP, you can try with the username "root@localos".

  Concerning

  Girish

• Change the size of the image, no res

  Hello

  How can I change the size of an image in Photoshop without changing the resolution?

  My original image is 300 res, I lowered to 72, and it decreased the size.

  I want to keep to 72, but expand.

  Also be involved; How can I make 1000 pixels or more on the long side (of the image)?

  Thank you

  If you want that the print size to change without changing the actual size of the image, uncheck resampling and enter the desired size of your image to print - say 5 "impression rather than 3". This will change the dpi, because both are related to the sizing non-re-sampled. If you want to keep the 3 "which was 300, but you want it to 72, then click on resample and change the resolution to 72, but this will change the actual pixels of your image dimensions.

  

  To make 1000px, select resample and pixels in the drop-down list and enter 1000 for the long side.

  

• Export to leave Lightroom and change the ratio l / h

  When I export a file with dimensions of original pixel of 4678 x 3119 with re-sizing file set to 1920 x 1080, either 'width and height' or 'dimensions', I always get a 1620 x 1080 file, i.e. the original aspect ratio is always maintained.  Is this correct?

  Change the image format must be done using the crop tool before exporting.

• How to change the INITIAL_EXTENT without re-creating the table

  Hi all:
  
  So far, we have several table with huge data.
  And after that we import these table to our test environment.
  We need to truncate the table first.
  But we found that the initial_extent is also attributed to a huge block.
  So far, the only way that we know is drop table and recreate the table.
  
  But because we have many table should do the same thing.
  I have no thing drop/create table is a good way.
  
  Is there a better way to release these space?
  
  Thank you

  No, unfortunately, a TRUNCATE and MOVE don't reset the INITIAL report.

  SQL> create tablespace X_TBS datafile '/home/oracle/app/oracle/oradata/orcl/X_TBS.dbf'
    2  size 500M extent management local autoallocate segment space management auto;
  
  Tablespace created.
  
  SQL> connect hemant/hemant
  Connected.
  SQL> create table X_LARGE_EXT (col_1 number, col_2 varchar2(5))
    2  tablespace X_TBS storage (initial 128M next 64M);
  
  Table created.
  
  SQL> insert into X_LARGE_EXT values (1,'ABC');
  c
  1 row created.
  
  SQL> commit;
  SP2-0042: unknown command "ccommit" - rest of line ignored.
  SQL> commit;
  
  Commit complete.
  
  SQL> select bytes, extents from user_segments where segment_name = 'X_LARGE_EXT';
  
       BYTES    EXTENTS
  ---------- ----------
   134217728          2
  
  SQL> select bytes, count(*) from user_extents where segment_name = 'X_LARGE_EXT';
  select bytes, count(*) from user_extents where segment_name = 'X_LARGE_EXT'
         *
  ERROR at line 1:
  ORA-00937: not a single-group group function
  
  SQL> select bytes, count(*) from user_extents where segment_name = 'X_LARGE_EXT'
    2  group by bytes order by 1;
  
       BYTES   COUNT(*)
  ---------- ----------
    67108864          2
  
  SQL> select initial_extent , next_extent from user_tables where table_name = 'X_LARGE_EXT';
  
  INITIAL_EXTENT NEXT_EXTENT
  -------------- -----------
       134217728    67108864
  
  SQL> truncate table X_LARGE_EXT;
  
  Table truncated.
  
  SQL> select bytes, extents from user_segments where segment_name = 'X_LARGE_EXT';
  
       BYTES    EXTENTS
  ---------- ----------
   134217728          2
  
  SQL> select bytes, count(*) from user_extents where segment_name = 'X_LARGE_EXT'
    2  group by bytes order by 1;
  
       BYTES   COUNT(*)
  ---------- ----------
    67108864          2
  
  SQL> select initial_extent , next_extent from user_tables where table_name = 'X_LARGE_EXT';
  
  INITIAL_EXTENT NEXT_EXTENT
  -------------- -----------
       134217728    67108864
  
  SQL> alter table X_LARGE_EXT move;
  
  Table altered.
  
  SQL> select bytes, extents from user_segments where segment_name = 'X_LARGE_EXT';
  
       BYTES    EXTENTS
  ---------- ----------
   134217728          2
  
  SQL>  select bytes, count(*) from user_extents where segment_name = 'X_LARGE_EXT'
    2  group by bytes order by 1;
  
       BYTES   COUNT(*)
  ---------- ----------
    67108864          2
  
  SQL> select initial_extent , next_extent from user_tables where table_name = 'X_LARGE_EXT';
  
  INITIAL_EXTENT NEXT_EXTENT
  -------------- -----------
       134217728    67108864
  
  SQL> alter table X_LARG_EXT deallocate unused;
  alter table X_LARG_EXT deallocate unused
  *
  ERROR at line 1:
  ORA-00942: table or view does not exist
  
  SQL> alter table X_LARGE_EXT deallocate unused;
  
  Table altered.
  
  SQL> select bytes, extents from user_segments where segment_name = 'X_LARGE_EXT';
  
       BYTES    EXTENTS
  ---------- ----------
   134217728          2
  
  SQL> select bytes, count(*) from user_extents where segment_name = 'X_LARGE_EXT'
    2  group by bytes order by 1;
  
       BYTES   COUNT(*)
  ---------- ----------
    67108864          2
  
  SQL> select initial_extent , next_extent from user_tables where table_name = 'X_LARGE_EXT';
  
  INITIAL_EXTENT NEXT_EXTENT
  -------------- -----------
       134217728    67108864
  
  SQL> alter table X_LARGE_EXT shrink space;
  alter table X_LARGE_EXT shrink space
  *
  ERROR at line 1:
  ORA-10636: ROW MOVEMENT is not enabled
  
  SQL> alter table X_LARGE_EXT enable row movement;
  
  Table altered.
  
  SQL> alter table X_LARGE_EXT shrink space;
  
  Table altered.
  
  SQL> select bytes, extents from user_segments where segment_name = 'X_LARGE_EXT';
  
       BYTES    EXTENTS
  ---------- ----------
      327680          1
  
  SQL> select bytes, count(*) from user_extents where segment_name = 'X_LARGE_EXT'
    2  group by bytes order by 1;
  
       BYTES   COUNT(*)
  ---------- ----------
      327680          1
  
  SQL> select initial_extent , next_extent from user_tables where table_name = 'X_LARGE_EXT';
  
  INITIAL_EXTENT NEXT_EXTENT
  -------------- -----------
       134217728    67108864
  
  SQL> select 327680/8192 from dual;
  
  327680/8192
  -----------
           40
  
  SQL> 
  

  TRUNCATE and MOVE reset the size. Or they change the initial report. SHRINK resets the actual size without changing the initial "defined."

  This is the behavior if a table (or index, too, I think) was created with an INITIAL size.

  See also the discussion in the
  Uniform measurement and measure / HWM - why I'm left with 24 blocks?
  and
  http://hemantoracledba.blogspot.com/2009/07/sizing-or-growing-table-in-autoallocate.html

  Hemant K Collette

  Published by: Hemant K grapple on 22 May 2011 11:54

• Changing the settings of document

  Hello
  
  I've created a huge, a flash animation that has nearly 40 layers extends to about 150 executives. The problem is when I started to create, I lined up all objects to the top left corner, also, all the objects that I had were a bit small in size. And now that the animation is complete, I want to integrate it into a web page and so I want to change the size of the document, but then also have the focused objects.
  I also want to increase the size of the objects to the title of the animation, but it is not possible to go to each keyframe in each layer and manually increase the size.
  Please tell me what I need to do?

  If you don't design it the way you want it to look when you are done, then you won't have a choice but to do it manually as the centering and sizing go. But you can try the following (try it with a saved copy of the file)...

  You can capture everything in these 150 executives/40 layer (copy/paste of images as a whole) and place them in a movieclip and moving to the center of things.

  You could try then scaling this movieclip containing to make things bigger.

• How to change the name of iWatch

  For some reason when I bought the new iPhone 7 and complete matching, it has the wrong name.  I must say my name and my husband.  I have looked at everything in the watch/phone and may not know how to solve this problem.  Anyone has any ideas on how to get my name back?

  Thank you

  J

  Hello

  On your iPhone, in the application of the watch, go to: Watch My > General > topic > name - change the name as desired.

• Setting to change the number of days to sync e-mail

  Where the parameter move to if you want to change the number of days that will be synchronized to your e-mail accounts? Or he is let out iOS 10 for some reason any?

  vrmcw wrote:

  Where the parameter move to if you want to change the number of days that will be synchronized to your e-mail accounts? Or he is let out iOS 10 for some reason any?

  account settings - sync mails - 'Exchange' on my phone - spam day-

  Not an ios 10 issue that I don't have the function to my yahoo account.

  Maybe you should ask your email provider.

• Can I change the default folder for new documents Pages?

  When I run the application Pages, the first thing I see is a Finder window. For some reason, this Finder window invariably opens, not with the Documents folder, but in a specific subfolder of the folder images. Sometimes I use this folder as source for the photos that I insert into documents, but I don't want to see this folder every time I run the application Pages.

  How can I control this behavior? I see nothing in the preferences page to set a default value.

  When you launch Pages, you will be presented with a file picker (not the actual Finder). The left sidebar will be a folder of Documents, you must select. At this point, you can simply stop Pages. He will remember to open in the last selected folder and on the content of the Document folder, you will see a file chooser. As long you open, edit, save, or export documents in the Documents folder, it will remember this folder.

  If you change the location of the folder memory, whether it is in the file picker, or save or export to another location of the folder, and then the next launch of Pages will direct you to the last used folder location and not the location of the Documents folder.

  There is no user parameter which can be set to always override the behavior of Pages above.