Change workspace FQDN 2.1

Similar Questions

• Problems, change workspaces

  Dear friends,

  I have a few cases of APEX configured to use authentication for the connections of developer (APEX Builder) HTTP header Variable. This is a great feature that allows our developers to have a single SSO account with access to several workspaces, as well as a convenient way to switch between them.

  

  However, after you have patched to 5.0.1 support to change workspaces seems to be broken. By clicking on the 'change' workspace simply refers me to the launch page of the current workspace (app id: 4500, page id: 1000). To Access workspace selection page (app id: 4550, page id: 20), now, I have to force a new session ID to be generated by the removal of the ID of the current session. Oddly enough, 'Space of change-work' works perfectly when the current workspace is "internal".

  
  

  This feature allows to work pleasantly with 5.0.0 and is consistent in all instances, so I wonder if it's just me or is there someone else has experienced similar problems.

  Thank you!

  Best regards

  Adrian

  This has been confirmed to be a bug and was quickly resolved by the orclapex dev team! Thank you!

  If you have upgraded to 5.0.1 and use varying methods of HTTP header or SSO authentication for access to the generator, then this is likely to affect you. A fix is available as a patch set exception and can be downloaded from MOS. Search patch #21501621.

• 64-bit CS4 Extended crashes when changing workspaces

  Whenever I try to change workspaces, accidents PS CS4 Extended. Operating system as follows: Windows 7 Ultimate, 64-bit, Intel CoreI7 3.2, ram 64 bit 12, so power concert shouldn't be a problem. If anyone has had similar problems or have an idea? I'm running and NVIDIA GeForce 8800 GTS with the latest driver and open GL active.

  Thank you

  Joe

  Try to reset your preferences: http://forums.adobe.com/thread/375776?tstart=0

• Cannot change workspace in Standard screen Mode

  For some reason any Photoshop won't let me change workspaces (upper pane or menu bar) if I am in full screen with menu bar mode. Is there a reason for this? Am that I only this experience?

  Yes, long story, but it is a workaround for problem.

• Change workspace

  Hello

  I put in the workspace to display content with 8 pictures across. What I saved as workspace2. However, whenever I launch Bridge, this resets itself to see 3 photos throughout. I deleted this workspace and recreated several times, without success. I realize that it is a minor quirk, but it is annoying me greatly.

  Any suggestion would be appreciated.

  You probably have the game of Bridge to 'automatically load at startup.  In this case it's not remember the last configuration unless you close the bridge before you stop to computer.

  A number of users feel that the auto load option causes more problems than it's worth.  Disable it.  I believe in CS3 Photoshop and CS4 is in Bridge preferences.

• PS Eleaments 9 changing workspace.

  I love Photoshop eleaments 9 (PSe9). But the right sidebar takes up way too much room. Is there a way to reduce or hide the Edit action, Create, this sidebar?

  I know that you can open and close a large number of different windows under it. I don't need the windows open most of the time.

  But even if I close my layer, cancel ~ history, color, etc. I now have a huge black bar on my left I can't climb.

  I rarely use edit, create, share.
  So how narrow it down, close or hide?

  1. Double-click the thin, black line that separates the Panel on the right of the edit box.  That will reduce it to a State of "semi-iconized.
  2. Take the line of separation of the Group of experts in a domain that contains a palette and drag the edge to the right to reduce the Board as much as you want.

  Ken

• Change FQDN VPN

  Hello

  Scenario is Cisco ASA SSL (anyconnect) client vpn. About 200 + user uses the VPN at rush hour.

  VPN address is attached to the certificate. Let's say that abc - vpn.domain.com.

  Question: we would like to change the name to vpn.domain.com. Is there an easier way to unroll the name change? so that the 200 users use the right name. Wondering if we can do this by using profile?

  You can change the FQDN name in customer profiles that are pushed to clients. But make sure that the new FULL domain name is also included a San in the certificate.

• change the database that an application seeking

  Hello
  I copied an apex site and want to use it as a site of dev, I made a copy of the current database and it made the dev database.
  
  What should I do in the apex dev site so that it points to the database of dev
  
  Thanks in advance

  Hello

  You must Access the application Express Administration Services (the URL that ends with .../apex_admin) to change workspaces APEX to the assginments schema. Once you log in for the administration services, go in Manage Workspaces-> manage workspaces to assignments of schema (in the Actions of the workspace section). You can get more information here.

  Kind regards

  Sergio

• CS5: all workspaces are greyed out all the time.

  CS5: all workspaces are greyed out all the time. Even the default value - at a loss about this, please.

  Workspaces are not editable in CS5 in the view full screen w/menu. Go to the Standard screen view to change workspaces.

• Photoshop CS 5 workspace

  At some point during my session, the workspace icons get grey and I was able to change workspaces. The entries under window/workplace are similiarly too gray. I'm sure bever which caused to happen. What can I do to solve this?

  Thank you

  Tonyu

  Try changing the Standard screen Mode. (press the F key twice)  For some reason any in Adobe CS5 off of changes to the workspaces in w/Menu full-screen.

• Could someone provide a network test tool because eclipse network problem?

  Operating system: Windows XP

  Problem:
  Momentics_tool/Flash 1.Eclipse/QNX Builder cannot sign a key, the software update, or
  install new software.

  Error code:
  1. search for: failed to update
  Some sites could not be found. See the errorlog for details.
  Unable to connect to the repository
  http://www.Adobe.com/support/Flex/downloads_updaters.HTML/content.XML#flex4_5?
  Connection refused: connect
  Unable to connect to the repository http://appspot.com/content.xml
  Connection refused: connect
  Unable to connect to the repository
  http://download.Eclipse.org/releases/Helios/compositeContent.XML
  Connection refused: connect
  Unable to connect to the repository
  http://download.Eclipse.org/Eclipse/updates/3.6/compositeContent.XML
  Connection refused: connect
  Unable to connect to the repository
  http://download.Eclipse.org/Tools/CDT/releases/Helios/content.XML
  Connection refused: connect
  Unable to connect to the repository
  http://download.Macromedia.com/pub/Labs/JSEclipse/autoinstall/site.XML
  Connection refused: connect
  Unable to connect to the repository
  http://download.Eclipse.org/Tools/CDT/releases/Indigo/content.XML
  Connection refused: connect
  Unable to connect to the repository
  http://www.BlackBerry.com/go/eclipseUpdate/3.6/Java/content.XML
  Connection refused: connect
  Unable to connect to the repository https://dl-ssl.google.com/android/eclipse/site.xml
  Connection refused: connect
  Unable to connect to the repository http://dl.google.com/eclipse/plugin/3.6/content.xml
  Connection refused: connect
  Unable to connect to the repository http://dl.google.com/eclipse/plugin/3.5/content.xml
  Connection refused: connect

  2 sign a key for the .cod file fail
  General failure. Please try again. Server is might be unavailable.
  Path: C:\Documents and
  Settings\hwu\eclipse\DataLogger_Nov21\deliverables\Standard\5.0.0\DataLogger_Nov21.cod

  3. install the new software fail
  Unable to connect to the repository https://dl-ssl.google.com/android/eclipse/site.xml
  Unable to connect to the repository https://dl-ssl.google.com/android/eclipse/site.xml
  Connection refused: connect

  Method:
  1. change of window/Preferences/active provider/Direct or invalid Native
  2. disable Windows XP firewall not valid
  3. with the help of proxy server parameter not valid
  4. replace invalid eclipse
  5. using the incorrect server proxy instead of auto-adjustment setting
  6 reinstall QNX momentics invalid
  7 change workspace not valid
  8. clean invalid /p2/org.eclipse.equinox.p2.repository/cache
  9 reinstall Java EE6 invalid SDK
  10. reinstall the cap of blackberry is not valid

  test ok Web page
  1. open the internal webbrowser. In Eclipse: Window-> the view-> other-> General:
  Internal web browser OK
  2. with the help of google chrome ok

  Try to find a screening tool or diagnostic network for Win XP to this very real problem is to find.

  If you know a good revised netwrok tool or solution, please share the information.

  Thank you for your attention.

  1.I try using a different internet IP to do the same thing. Work well.

  2. with the help of another PC and even internet IP to do the same thing. Error is the same.

  Obviously, the problem is the parameter/firewall/Protocol Internet IP, that has some problems.

• Tool windows

  Is there a way to get the small windows which open different tools etc and pop ups that you save a file, to display on a screen, even if you use multiple screens?

  Thank you

  Denise

  Generally, Panel positions are stored in the sessions, even if you close them. However, you can preserve it by creating a custom workspace. This way if you always change workspaces, reset preferences, etc., you will always be able to return to the configuration of your favorite band.

  There is no parameter to indicate the program to open the panels on a specific screen. So you will have to do the job opening and their positioning first and then save the workspace.

  Mike

• Should what color settings I use in Photoshop?

  

  
  

  These parameters ^ are good? Can I use Adobe 1998 or Profile (↓) default monitor

  
  

  

  
  

  Also should what color settings I set in the color management window. Right now the default profile is set to Adobe RGB 1998 (↓).

  
  

  
  

  
  

  Now, workspace is set to Adobe RGB 1998. I usually joined Adobe 1998 in most of the Images. I know the difference between famous color profiles (Adobe 1998, sRGB, Prophoto..)

  When I use view-Proof Setup - Monitor RGB colors seem more vivid (and natural).

  
  

  Also the images when opened in Adobe Ps seems different when displayed in the default photo viewer windows (and wallpaper)... But Adobe RGB 1998 default in Windows Color Management. Thus, the Ps and photo viewer (or wallpaper) image should look even. But it's not. Why?

  
  

  Adobe Photoshop is a software managed on the basis of the color... This means that the settings in Windows Color Management has no effect on the display how Photoshop colors?
  

  
  

  I've read dozens of Web pages about all this. Some of them told to change workspace - RGB to Adobe RGB 1998.

  
  

  Also every monitor is different then how the uniformity of color is maintained around the world? Not all hardware users calibrate their display.
  
  

  I know there are a lot of questions above. I'm confused. Searching for this for months.

  
  

  Thank you for giving your time to answer these questions.
  

  Workspace must be a standard space - sRGB, Adobe RGB, ProPhoto. In fact, it is not all that matters, because the embedded document profile always overwrites. In other words, as long as you have defined strategies to "Preserve embedded profiles", which is the only sensitive parameter. You have it, so that's fine.

  Do not use the monitor here profile! The color settings dialog box is to manage document profiles. The monitor profile is a different animal in all, serve a different purpose.

  The monitor profile is implemented at the level of the system - the calibrator will do that for you BTW - and will be used by color management applications without any intervention from the user. The profile appears in the color management > devices dialog. This is your last screenshot. The monitor profile must be marked 'default'.

  You need both of these profiles, monitor and document, for a managed path color display. The source profile is converted on the fly, by application, on the monitor profile. These converted values are sent to the screen. In this way the display is exactly corrected for, much more precise than what can be achieved simply by adjusting the monitor.

  It seems that you are using a canned profile, supplied with the monitor. Just mark it by default and that's all. Note that you you get a much better result with the help of a Stallion! Manufacturer profiles, despite assertions to the contrary, are generic and not designed specifically for your device. They are also surprisingly often defective/broken. Come if you encounter specific problems.

• Question about Kerberos/SSO

  Hello

  We are currently assessing Horizon Workspace. We strive to achieve SSO working for our AD users. We have done until now

  * Arrival at the connector GOING to the field

  * Active Windows authentication on the connector WILL

  * Added connector VA URL FULL for the local Intranet Sites, checked securty settings in Internet Explorer

  When we navigate to https://FQDN-of-connector-VA the user is authenticated without problems, but when you browse on https://workspace-FQDN the login screen is displayed.

  Analyze Connector logs WILL show the following for the scenario to work

  2013-06-04 15:02:23, 317 INFO: com.vmware.horizon.connector.mvc.ControllerInterceptor - / hc /, used/total/max (MB): 56, 487, 2666

  2013-06-04 15:02:23, 321 INFO: com.vmware.horizon.connector.mvc.ControllerInterceptor - / hc/authenticate /, used/total/max (MB): 56, 487, 2666

  2013-06-04 15:02:23, 324 INFO: com.vmware.horizon.connector.controller.AuthenticateController - samlRequestInfo 1: null

  2013-06-04 15:02:23, 324 INFO: com.vmware.horizon.connector.controller.AuthenticateController - authorization null header. Initiate SPNEGO in replying to the questionnaire 401 w / header: WWW - to the

  thenticate: NEGOTIATE

  2013-06-04 15:02:23, 628 INFO: com.vmware.horizon.connector.mvc.ControllerInterceptor - / hc/authenticate /, used/total/max (MB): 56, 487, 2666

  2013-06-04 15:02:23, 631 INFO: com.vmware.horizon.connector.controller.AuthenticateController - samlRequestInfo 1: null

  2013-06-04 15:02:23, 631 INFO: com.vmware.horizon.connector.controller.AuthenticateController - AuthWithoutNego:YIIIFgYGKwYBBQUCoIIICjCCCAagMDAuBgkqhkiC9xIBAgIGCSqGSIb3EgECAgYK

  KwYBBAGCNwICHgYKKwYBBAGCNwICCqKCB9AEggfMYIIHyAYJKoZIhvcSAQICAQBugge3MIIHs6ADAgEFoQMCAQ6iBwMFACAAAACjggZBYYIGPTCCBjmgAwIBBaEMGwpXSVRDT00uTkVUoikwJ6ADAgECoSAwHhsESFRUUBsWaC1jb25u

  LXZhMDEud2l0Y29tLm5ldKOCBfcwggXzoAMCARehAwIBAqKCBeUEggXh5ThMi + tcL78Rpd9ANLdVQs6VqffxDfsJM0JKUhsoEQC6ErttZxafWBmmy1znDE/CpY/rwwu/AlOObeJ + Ii9gWQVUk8ezAgdThCfcyqwFquqCXZ77 / HhZogCR

  CtIbaT1ZRonQ + mnPuq4leaXYi + HeHVYrY0gLTVR0nW57JySrDjbaRrqidgoB65sKsvZ2E4Qfqeor + NXFz8RVhG32ABNnVrorpNYtO + 0cOm + ZXQ + wImIdFhcf7FcgSK / J8YKcQTIkydfS4s8u9JDIqn7huM + YPhdDHtChBUUaVTe9Blz /.

  4El, 1sNFSN4IA2OOoQ9nqqGXeNVzMaAYnmYuJD2Bao8QbhtBvdJNiTd7Tlnjg4HoYC1D3pdDGMSwiTRJFhGfu + Yha6n7A4UiycAnar28NVb2y7O3lQmwUFfs3WvsK7i19axEJv + KhhFcZt3MJZV3QNlikWYRZJ7wwzfRDRc + BVzv + rZe

  Ov5xQc9ujs7YEjbwNVVwgjZRRlOAd0i9RFabfBaao88wkOveHG365pFH1IAHOVzmXPedO / + cF/pRDC4ccoMudx6nGlAY4ua9xaqx9P5ijzWMxwx62wCoEkdfiMzTlfmdvlJT3hT9x5SeQu9ljt4bEWUbDnQo06IUxTiiRgMBkNYBL6VH

  o829U13KzpV, Z0202vimKvYboU2tNohBx6IFzWDert3PhktvUBT5i21vKR81fvVNc55FmmZWTceyL8wGv6p7lI0ajd0TH712UWz7J20C6D6CcT2UODQAKNgSM9EAx9AbqmrNyhRfZPa, dOBBUNWTg7bHCQ, GPL5h3UQH5lo47v25qD + y

  DwI0sMikL7da7 + Sx + mg04wSM595OLMkt7dGdVusOr/yjkZG14Ta19DJ4VuWn2pR + 3fpxSzMFVva9XHgmZwt2CuYuMqq + fSc8MBI/uT6Y7maoqPvWAN3seZxe2Tp0 + JM, jny6NoC / 7 K/91jyHORJ6dDSO15QNZd4WNdvl/GHc70XZNPPR

  VUsUsaVeJ7e80hgCeKQxyT10vhcad1tfcSvbieDbKEcRcoCreq30vNFWkDqHt8cKrC2pv62igkJuAvpsFwROfIo483dbfob3qR0c20i + ICLC0xQw5BGJ3YO8/18GARn/ucsUtb3rBgzOZzFISlfJqZgegtR4FAyjnT77PZvRqQju1T4P

  EbaCW1nU0WsguCLldrpbAI69hXN2dzP + Nb + ln9d15BVqLBk70HQSmPc6SjcJSCr00D86MGgldI5pgZczEJSPrGwwagkiZQGbJBUBkjB81SfrY5HmllaU6D7MF37WlCBMTPufy1h1qy4X4f3phJi9ooofHtiu3QGmqz9Hd093XyDThvd6

  4 + tpF0t4kcJ0ZRsinZNWdc/jO0am9ttmMj7pkMcQVAHJ33Fl8A 5s6mag + vZKQHA5i + tImdUhFOFZTX + JYN8yMPIUA5HqkHLCDTxcytwO7v6kRm/QNSHhWV9Z + 96DZCz7xOWKdEuD15/rCFGEZEUnl + caTbFQcRGo3Xdr6evGia3d

  iFiJAbTuCIres2ylFXCe/Yfis1IDfaswUDEsbOeeROInGmRCj5ZfcE + 11k1LUfNa9xPh9HFd5Abjt8fiButeDV2Xk6HM7/xjuNuhEBSo04GAJ4MHaY4Id8D00XSS + UgQeteJDOQnvu3LNYc80V2SysmXWu8zerYr6mgEuabiieBU + RW

  ShryTcCxnw9jps + ZyoP2eV8dhrPWVGTOvN8Llq + O4AWp + eO0e + Yk + zjjBSJ3ZW + sFmuJ + xNmStFWdZ97cAOKFPvvwN6HOdP + 2iMrWdVzhJLQaonPtJM2vt780y80VcQWRlXl9ij0tLNkyFYKfapg/LQKRvm4/lVESWi/o4H7IyWCZMUh

  iPM9svYgvwNb2Xbcv6ihmgH9OM7/stSOf16OGEsbB1XzXkLgVLOQofg vkC + 3r + lHG64cqxCmgeVcDkyQtMGS0KDGpOpocpcVyFykqr27tisUCNNSYW + johjBRGkgZSkggFXMIIBU6ADAgEXooIBSgSCAUYWvQcbeNFTNyc0czVIDoFr

  90AJyIrsbEAlckWB7h33tl2R9OEXauESBVChMsXNcixxCOenYCcnQK0mQ31CodyUdnvrKHp6XUUrwpD47ljGorTXz7oKc + 9f0I36bMQxGuDTzmRMPUiugwgDP1t4w6qmz9a7tvSFtyY5QDAZwRDrSNzQNtmzxxEJjNzpuTFf/qruYg5f

  ZfJv4owzEHX5jJ2dxgltMsktJvuDEkkiyDZLeHcseW73hxyaXOzBssb22iwrr7t5isZZMys4H8T7u5ZHSbVyPhybrm + rwx36W30rgjYO45ynYfpvVMMCSgvRlsLNlJV/0qZsh6XJ + khxKZfF18mYHmKs8H9722XKI + SzAre4P1HofVok

  NXv8WHh8KLnhKQFjFIsBOBHyoXVdeA + AZoK3oas7FGReC2V/YOymebq6HL49Hw is

  2013-06-04 15:02:23, 641 INFO: com.vmware.horizon.auth.ntlm.WindowsAuthServiceImpl - authenticated username:9793

  2013-06-04 15:02:23, 641 INFO: com.vmware.horizon.connector.controller.AuthenticateController - authentication SUCCESS: 9793

  2013-06-04 15:02:23, 641 INFO: com.vmware.horizon.connector.controller.AuthenticateController - samlRequestInfo 2: null

  2013-06-04 15:02:23, 641 INFO: com.vmware.horizon.connector.controller.IdPInitiatedSSOController - samlRequestInfo: null

  2013-06-04 15:02:23, 641 INFO: com.vmware.horizon.connector.controller.IdPInitiatedSSOController - acsUrl is missing; using State acsUrl: https://FQDN/SaaS/API/1.0/post/federate?identityProvider=HorizonConnector__1

  2013-06-04 15:02:23, 641 INFO: com.vmware.horizon.directory.ldap.LdapDirectoryService - search attribute: 9793 - START

  2013-06-04 15:02:28, 654 INFO: com.vmware.horizon.directory.ldap.LdapDirectoryService - search attribute: 9793 - SUCCESS

  2013-06-04 15:02:28, 654 INFO: com.vmware.horizon.connector.controller.IdPInitiatedSSOController - samlAttributeNames for 9793: [userPrincipalName, lastName, phone, electronic mail, the user

  Name, first name, disabled, ExternalId]

  And here's what happens when you are surfing for the FQDN of the workspace

  2013-06-04 14:59:41, 382 INFO: com.vmware.horizon.connector.mvc.ControllerInterceptor - / hc/authenticate /, used/total/max (MB): 54, 487, 2666

  2013-06-04 14:59:41, 391 INFO: com.vmware.horizon.connector.controller.AuthenticateController - samlRequestInfo 1: SamlRequestInfo [acsUrl =https://FQDN/SAA ]

  [ S/auth / / response saml, relayState = {'idpId': 1, 'dest' ': ' 'https://FQDN:443 / web'}, nameId = < null >]

  2013-06-04 14:59:41, 391 INFO: com.vmware.horizon.connector.controller.AuthenticateController - authorization null header. Initiate SPNEGO in replying to the questionnaire 401 w / header: WWW - to the

  thenticate: NEGOTIATE

  2013-06-04 14:59:41, 402 INFO: com.vmware.horizon.connector.mvc.ControllerInterceptor - / hc/authenticate /, used/total/max (MB): 54, 487, 2666

  2013-06-04 14:59:41, 410 INFO: com.vmware.horizon.connector.controller.AuthenticateController - samlRequestInfo 1: SamlRequestInfo [acsUrl =https://FQDN/SAA ]

  [ S/auth / / response saml, relayState = {'idpId': 1, 'dest' ': ' 'https://FQDN:443 / web'}, nameId = < null >]

  2013-06-04 14:59:41, 410 INFO: com.vmware.horizon.connector.controller.AuthenticateController - AuthWithoutNego:TlRMTVNTUAABAAAAl4II4gAAAAAAAAAAAAAAAAAAAAAGAbAdAAAADw ==

  2013-06-04 14:59:41, 410 INFO: com.vmware.horizon.connector.controller.AuthenticateController - NTLM tokens cannot be used for authentication. Redirect to the login page.

  2013-06-04 14:59:41, 457 INFO: com.vmware.horizon.connector.mvc.ControllerInterceptor - / hc/connection /, used/total/max (MB): 55, 487, 2666

  In this case, NTLM authentication is used, which does not work.

  Is this by Design?

  Concerning

  Carsten

  You have only a single connector in your system? If this is the connector by default, its IDP URL is set to the FQDN of Workspace Horizon. Therefore, if you switch from Horizon Workspace FQDN, Kerberos authentication will not work.

  You can try the following?

  In the connector user interface admin, click the identity on the left navigation provider, replace the URL with connector FULL domain name.

  If you want to support both forms of auth - kerberos for internal users, name of user and password for users outside, etc, then you will need to install an additional connector. Please see the installation guide for more information on adding a new connector.

• The page you are looking for is not available. You may need to contact your administrator with this error: 404 Page not found.

  I am at a loss.  I've set up a root certification authority to sign all servers in my workspace of Horizon, SAML is in the Green and after a lot of reading when troubleshooting also synchronized on all my ESXi hosts and guests.

  Basically, what I did is the following:

  Set up the connection to the Server VMware View Horizon 5.2 - created different pools and can connect via the customer different platform. (a few times to eliminate any possible configuration errors along the way)

  Configuration of VMware View Horizon Workspace 1.0 (a few times now) with self-signed and CA signed certs.  My workspace appears fine, the synchronization of files, apps work, and view pools appear.  When I try to launch your desktop from inside the Horizon workspace I get this error:

  The page you are looking for is not available. You may need to contact your administrator with this error: 404 Page not found.

  Now I think that I followed it down to something to do with SAML connection - which, to my understanding, archery chips between workspace and view.  On the login server, I see it in the Windows event log:

  BROKER_USER_AUTHFAILED_SAML_ACCESS_REQUIRED

  SAML access required but not tempted by customer

  Attributes:

  Source = com. VMware.VDI.Broker.filters.SamlAuthFilter

  Time = MON may 20 16:06:41 MDT 2013

  Gravity = AUDIT_FAIL

  Node = ViewConnection.access360.ca

  Module = broker

  Recognized = true

  Something is not crossing to allow me to access my office view since the workspace of Horizon.  If I remove the requirement of SAML on the login server see, when I try to connect to a desktop computer from the view connection server I get a promotion for and can I get my IDs & field and have full access with reviews, as well as blast HTML - just cannot get there with Horizon Workspace.  There must be something that I am missing with SAML...

  As I said, I'm at a loss here on what does not work between the Horizon workspace and the connection of SAML for display to connect to the server.  There is no server security, server transfer, and firewalls is all off, so I don't think it's a network problem.  Simple as possible.  The Windows Journal event displays the login displays server error is: access required but not attempted by client SAML.  I have all my servers synchronized after a few seconds - so I don't think that documented the TIME Horizon workspace synchronization time sensitivity is responsible here.  I am Pack overnight, but will do exactly the same thing with a client of tomorrow - hopefully without the same result!

  Any ideas?

  A

  So I re-deployed the VAPP (again!) very attentive as I went.  As usual, the initial database installation failed because I entered my domain FULL of the gateway name, so it does not match.  After useful messages already there for this (Workspace install fails with error creating the user admin) I used the wizardssl.hzn of connfigurator - going to recreate a rootca to the environment based on my FULL domain instead of the bridge - going and then let it grow all for the other vApps.  I then connected to each and pulled down my private rootca and ran c_rehash, etc. (another useful message!- adding MS signed Certs to Horizon Workspace & laquo;) Carlos & #039; Corner) I actually use my background to UNIX and openssl to be my own private CA and sign all of my certificates.  I created the SAN cert and added to the SSL configuration on the Configurator - going and connector - going.  Oddly enough, both of these server do not appear to be accepting SAN cert that includes their ENTIRE domain, but that's for another day... My Horizon Workspace FQDN does show as being approved by installed RootCA private (which does not have other DNS names for the service - going, the Configurator - goes, the data - will and the connector - will, but as I have already said--a battle for another day) so it's a good thing.  I joined my workspace to my domain name - well!  Activated would be pools seen in the Configurator - goes - sync - good.  CRT for the my display login server has accepted and implemented the SAML trust.  Still good.  Sync in my opinion users group who already had a couple of linked clone pools allowed to do.  Good.  Connected to the FQDN of my workspace and clicked on computers - seen my 3 pools.  Clicked on one and after a few seconds, launched in a new window of the explosion.  Success!  I disconnected and connected on a different machine, and something that I saw before, but doesn't have a lot of attention to was the connector - will put 'use windows authentication', I couldn't understand why every time I sailed on my Horizon workspace a no vmware window opens asking access my FQDN:443 with a user and pass.  It is this setting - duh.  I'm not sure yet that gives me, so it's off for now.

  Thanks for all the input: it's good to know that there are others with some of the same questions.  It's still v1.0, it is related to some of these pitfalls.  It is capricious with derived from same time less than 10 seconds seems to have a negative impact.  Had to ensure my ESXi servers were strong (never worried a lot in the past with MS AD being quite tolerant with small derivatives) I tired my vApps affecting a NTP, but they seemed like being left to the default of synchronization to the ESXi host.  See how than pans.  CERT is somewhat capricious depending on your deployment.  Of course the connector - will and the Configurator - must be signed by a CA that they are internal, but always be nice to then have signed internal...

  Now, I'm on ThinApps for desktops as well as the web interface integration.

  I bumped my head against the wall with my first configuration of Citrix XA and XD (before having VDI in a box!) and it was the best way to learn.

  I don't know that I grave along that I finished my PoC, but I'm very happy with today's results.  I still plan on the comparison of my logs successful with the logs I have pulled my former deployment TIME and see what it was that it was broken.  I think it was that wanted me a PTR record to my domain FULL DNS MS. name  I think I just had the direct search for the original bridge - will and FULL, but only a setback for the gateway domain - name.  Would explain why I was never able to connect to the gateway to access your desktop.  Oops.

  A