Change your state of global hot spare on loan

Similar Questions

• Md3220 and md1220 combo, how to configure any global hot spare parts.

  The MD3220 is full of 300 GB 15K SAS drives the MD1220 is full 1 TB NL 'SAS' 7.2 K disks. The two boxes have discs 22 & 23 unused in the goal is relief. However all the mechanisms that I use to create hot household simply attaches all four disks to two speakers. I'd rather have two spare drives only protect readers in their own enclosure. Interestingly enough, I asked the software dell 'automatic configuration' (sic) the hot spare and he decided ONLY two use 1 TB drives and use them to protect the two speakers. In addition, I was quite puzzled as to why he also allowed me to do it manually the absurd configuration to allow a 300 GB drive protect a forum composed of 24 1 TB disks. In any case, is it possible to have host associated with a case (or disk group) spare parts. ? Thank you.

  You can't dedicate a hot spare in a picture of MD3k-series. If a hot spare will succeed for any player in any long case that the size of the spare drive is the same or larger than the failed drive.

• Add the hot spare on Poweredge T430

  Hello

  I have a Poweredge T430 with a PERC H330, I add another drive to have as a spare.

  I did all the step and show car ready in the physical disk, now when I go on the virtual disk 0 and try to assign immediate replacement without hard drive shows, that I. m do were bad?

  The drive is ready and good to go, is the same model and size, etc., how can I now add to the virtual disk.

  ndaniel

  I see in the physical disk as a global hot spare drive and ready, maybe I need to remove it from the overall immediate focus on this virtual disk replacement I have?

  Hot spare is not a property of the virtual disk. Yes, you will need to cancel the assignment as a global hot spare to assign as a dedicated hot spare drive. If you only have a virtual disk, then it is not serious if it is global or dedicated.

  Thank you

• If... Else if statements with global variables

  Hi people!

  I have a picture of a stove that I want to pass on the right sliding just behind the scene and swipe left left off the stage.

  The stove, at the beginning, is at the center of the stage.

  So, I have created 3 intial global variables (I ' ve introduced in the right position in... edgeAction.JS as described in this topic):

  Var Center = true;

  var left = false;

  var right = false;

  And in the stage-> Composition ready, I created 2 functions related to the SwipeRight and SwipeLeft events. I used if... If... statemens to check what position my photo's.

  swipeRight = function() {}

  If (on the left)

  {

  sym.playReverse (1000);

  Var Center = true;

  var left = false;

  var right = false;

  }

  ElseIf (Center)

  {

  SYM. Play ("Right");

  var right = true;

  var left = false;

  Centre var = false;

  }

  else {}

  SYM. Stop();

  }

  }

  swipeLeft = function() {}

  If (in the Center)

  {

  SYM. Play ("left");

  var left = true;

  var right = false;

  Centre var = false;

  }

  ElseIf (right)

  {

  sym.playReverse (3000);

  Var Center = true;

  var left = false;

  var right = false;

  }

  }

  I think I did everything correct, but it does not work!

  Any suggestion?

  You can find the Web release and the project herefile.

  Thank you VERY MUCH in advance for your help!

  Davide

  I think that your statement of global variable is correct, but when you reset the values of the variables by using the var keyword, you are in a different scope.

  So, instead of this:

  swipeRight = function() {}

  If (on the left)

  {

  sym.playReverse (1000);

  Var Center = true;

  var left = false;

  var right = false;

  }

  ...

  Try this:

  swipeRight = function() {}

  If (on the left)

  {

  sym.playReverse (1000);

  Center = true;

  left = false;

  right = false;

  }

  ...

  HTH,

  Joe

• Has no disk in MD3000i - no not the kick in hot spare

  Hello

  I'm having a lot of problems with this table.

  First a defective disc.  The hot spare does not activate.  Or maybe that was the case, but it did not work because I got an error message "physical disk failure - failure of reconstruction.

  Then another disc has no so the vdisk went offline.

  We had a spare provided and it was put in the table.  But when I go on change-> replace the physical disks in Storage Manager it tells me that "there no physical disk defective or missing in this storage array that can be replaced by using the function to replace physical disks."

  How can I go about getting the vdisk upward and execution?

  Thank you

  Steve

  If after looking at the beam of support I see where you have the 2 has no drives hard and saw where reconstruction has failed. I see that FW is a bit outdated, but this is not to say exactly why reconstruction failed. I guess you don't have access to the data on the VD. The disc in the slot 0.1 seems to be the last disk that failed. An option that we would try to force online and get the table in a degraded state, so that we can have a backup if you have not already. However, if you do not have a backup your best bet would be to get the 2 new drives and re - create the RAID array and restore your data.

  To force the disk online, you will need to enter the SMCli and use the command:

  SMcli - n {name} - c "revive physicalDisk [0,1];

  If this does not work and that you are not able to get a backup copy, then I recommend you get in on a company like lead investors to 1-800-440-1904. Please let me know if you have any questions or concerns.

• Is it possible to change the State through several buttons?

  If I have already created, say, 100 identical buttons, and I want to change the State 'down' to a new color other than black. is it possible to do it quickly? I use 9 Captivate.

  Because you talked about "buttons" I assumed that you were pointing to the InBuilt States: Normal, rollover and down. The situation with styles is a little confusing IMO concerning States. You cannot set the States in Manager of Style of the object, as was the case of the Captivate 8 buttons. Since 9 Captivate, you will need to define States in the Panel object, for custom reports also state in regard to integrated States. Part of the InBuilt says are really integrated in the style: this is the case for all of the State for the Image buttons, for the background/outline for other types and form buttons. The labels on the buttons (text, system and form) are not part of the style. The exception are the image buttons because you have to put the text in the images. If you add objects in integrated States, they wil not be part of the style.  Even for States custom: they are not part of the style. I have problems with this configuration of confusing. It would be much easier, I think, if everything was recorded in an object style could be edited and changed in the Object styles Manager.

  The button menu "three lines", also called the hamburger or hot dog button, has opportunities to save changes to an existing style, to create a new style to apply a style to objects with a different style by default (as long as you override, leading + sign to appear).

  This no doubt confused answer: the workflow, I proposed with object styles, does that for characteristics that are saved in an object style (there no real explanation to help him as far as I KNOW). Now, I understand your last answer (sorry) that you are talking about a State that isn't integrated, but custom. In this case, you cannot change this State for all buttons at the same time. Only way is to duplicate the buttons. My apologies, I may have to write a blog about the object styles and its Director. I've heard several trainers proclaiming that they never use the OSM.

• change a State of buttons based on another value of buttons

  do not remember how to change a State of buttons depending on the value of another button.

  I think it was a structure of the event?

  can someone point out an example?

  Thank you

  There are several elements to your question:

  In response to a status change button: this can be done with either a structure of the event in a loop, or by querying the button in the loop. Examples are provided with LabVIEW on the use of the structures of the event.

  Changing the value of another button: this can be done with either a local variable or a "Value" property node (Cue the crowd of local variables at this stage.). Note that the lock of your button action will affect if you can do it. See this article for more information: why is my property a Boolean node a Variant?

• change of State and change read Boolean

  Hello everyone,

  Sorry to bother you, but as a new user of Labview, I always have problems to the VI program. I try to do my best alone, but right now I'm at an impasse for some time... That's why I come back to you.

  Here's my problem:

  -in A VI I made, I have a Boolean value which controls than if the data are recorded or not. When recording is activated, the led lights up, when off the light is.

  -Actually, I bind the Save action to something more complicated:, I wish that the State changing the Boolean value to light several leds in a specific order.

  Thus, when the Boolean value changes, this should change the status of the leds.

  I managed to do it, when you press the button in the boolean_count.VI, which has for result that I would get.

  My problem is that the state change is not triggered by a push button. It depends on several State (true or false), which the record command or not.

  To simulate this, I tried to do the same as above, but with 2 Boolean values, which must be both faithful to initiate a change. I tried to do this in the Try_out_boolean.VI file

  But iin this file, when I push my buttons, there is no change of State in the right part of my Panel of...

  I hope you can underrstand what I mean. If you have any suggestions, I'll be happy to read them.

  in the property node "1and2" of your Try_out_boolean.vi, you read the property "BindingLEDVisible".

  (as I downloaded) That makes no sense at all.

  -> Click on with the mouse on the node of this property one choosing the property "Value" instead.

  Then, your application must react as wanted.

  Thre may be other possible improvements, for example using the event structures instead of constantly of the poll.

  but that's another topic...

  I hope that this help a little.

• When I turn on my computer, I get a bubble in the lower right of the desktop that says: "a program has been blocked from editing your search default setting". Then "click to change your notification settings."

  Whenever I turn on my computer I have a bubble in the lower right corner of the desktop that says: 'Search Settings Notification' then 'program has been blocked from modifying your search default setting". Then "click to change your notification settings."
  When I click I get a box called Toolbar Options. Tab shows the search parameters. Statement: "search settings protects your search settings of the browser to keep the programs change without your knowledge." I am then presented with 2 boxes checked with the following instructions: 1. protect my browser default search and let know me of any attempt to change it.  2. enable the browser error Network Wizard page.  Downstairs, the options are either save or cancel.
  My question is what does all this mean? Should I uncheck boxes or both? How can I avoid this message occurs ever time I turn on PC?
  I must tell you that my browser is Mozilla Firefox.
  Thank you.

  original title: Notification settings search

  Hello

  I would check the first box for sure, the second is not as important but probably a good idea to choose from as well. Once you save it, it should not appear again.

• Reuse a RAID disk and hot spare procedure

  My questions are for a PE R720xd with the PERC RAID internal H710P controller.

  I have replaced several RAID drives in the past, but I never did this before, so I was hoping to confirm my procedure for hard drives hot swap. A drive failed on one of my live servers. In the past I would always bring back the server during a maintenance window and replace the drive by using the configuration utility to make sure everything went correctly. This particular server has become a system of very high availability, so I was hoping to use for hot spare option do without bring down the server.

  The other issue is that Dell is not in stock on the disk, I need so I intend to use a same car I replaced recently on a server off-production that has already been fixed in a RAID1 in another Dell R720 Server table. Any time, I have never replaced a RAID drive, I always used a new drive out-of-the-box, so I'm also not 100% on how to prepare the drive to use for a new RAID array.

  I thought I am brings the donor server down and come off the drive I want to enjoy this the RAID array server using the configuration utility. So a question is - is there anything else I need to do preparation used in car for use in the new table?

  With respect to hot-swapping which lead to the new array, is it really as simple as just popping one out and put a new in? Can I do to confirm it has taken - apart from just confirming that the lights blink like crazy during synchronization?

  Thanks for your understanding!

  C.Short,

  You can switch the drive, but it will be not just to rebuild there is data on the hard drive. So when this disc is inserted, it will show foreign. You will need to do is to boot to the controller (Ctrl + R) and then CLEAR the foreign Configuration. Once completed, then you will be able to rebuild the disk on the virtual disk, you can do the BIOS of the controller, or from the OpenManage web interface (depending on the operating system).

  Let me know if it helps.

• I am unable to buy all the apps in canada. I can't change your addess canada for payment info

  I am unable to buy all the apps in canada. I can't change your addess canada for payment info.

  I can browse all apps in the store, but the difficulty to buy. When I submit all my credit card details, I can't change the United States in the Canada.

  Hi Vandu,

  There seems to be a problem when purchasing apps.
   
  You must contact Microsoft Store for assistance.
  http://www.microsoftstore.com/store/MSUS/en_US/DisplayHelpContactUsPage
   
   
  Good day!

• Changes of State of Muse broken on iOS devices

  My site requires changes to State on the Tablet and mobile versions. It's a specific interactive feature which is really the purpose of the site - an animated cartoon. IPhones and iPads don't recognize the State of any kind changes (click on state changes, bearing not only who are of course different on touch devices). Tablets, Android-based phones work perfectly with the site. I confirmed with a representative of adobe and still they tested, they are not clear on if it will be fixed. I had to talk to several REPS just never answered follow-ups, even if I downloaded my files so he could test and it has downloaded them. It has been broken for months and I got ahold of a representative who confirmed that it is software which is buggy and not something I do.

  The States changes are an important feature, even announced as a widget in the program, and they are structured on devices that make up a large percentage of web traffic. I would never use Muse if I had known that this feature did not work. Now I'm stuck with a ton of work done and broken site and he "may or may not" be fixed.

  I just wanted to post this for others who might be trying to use the state changes in muse and are confused.

  Does anyone have a work based on the code around to perform the function of state changes with an iOs device?

  Thank you for bringing This problem to our attention.

  We are able to reproduce the problem on our side as well. I reported the problem to my engineering colleagues.

  We currently use CSS for different States, and we believe that the behavior you have surfaces because of the way Safari (iOS) Decides to manage these States. We are currently researching a fix for the problem. I hope that we can solve the problem sooner rather than later with one of our future updates.

  Thank you for your patience.

• change of State of the photoshop button after it is placed

  I can't find out how to change the State of a button in photoshop after it is placed in the layout. I know I can set the State of a button as I place, but once it's in it seems to be stuck.

  Example: I create a badge in PS with normal, rollover, the mouse down and then active States and place it in my site. Later, I decide I want to active State to even appear in a reversal, but since he's already been placed, I can not change the State.

  Anyone had this same problem, and if so have you been able to change States without remove the button and the re - set?

  So, it might be better to simply have a button to Muse, in this way, you can change the States. You could also use your PS button and oblige States to be something like a shadow that changes in different States. Just a thought.

• How can I change the States on the part of a page, but not all?

  I cannot figure out how Word of this issue to make sense, but here goes...

  I have a page with 2 parts, graphics and Photos... I want the part Photos to have a "next page" and "previous page" button which does not interfere with the graphical part, in case I want to add a next/previous button to that too... but they are all on the same page... so what I have to do a new State for each combination of pages? (like the graphic page 2 and photos page 3 together, graphics page 2 and photos page 4 together, etc. etc.) because I could probably do this... Or y at - it an easier way?

  Thanks in advance!

  Your solution here is the custom, components, each of which can have its own States. Make graphics part a custom component, and the pictures part of a custom component. In this way, you can the buttons to the pictures component that changes its States, the graphic component leaving unaltered.

• Import XML to change the State field

  I am importing xml in a form.  I have a few if expressions to change the State of a field based on the value of the xml fields. Here's my expression for the color - initialize the event: if (Lv = 'blue') {this.fontColor = "0,0,204" ;} ElseIf (Lv = 'black') {this.fontColor = "0,0,0" ;} LV is a field in the original shape. Here's what's happening - the first value fontColor in the expression is applied to any Lv is equal to. So in this case, the fontColor = "0,0,204" gets applied even if Lv = 'black '.  It's almost as if the event is don't know if expression and pickng just until the instruction at 'this.fontColor '. Any ideas?

  Hello

  Try your if statement a == double, you use when test for equality. Also, if there are only two incoming colors, you could decrease the other if statement and just run with another.

  If (Lv.rawValue == 'blue')

  {

  this.fontColor = "0,0,204";

  }

  on the other

  {

  this.fontColor = "0,0,0";

  }

  Good luck

  Niall

  My bad: it depends on how you make in the XML, but I assume that Lv is a field of receipt of XML data. Because the language is javascript, you will need for the field .rawValue VL.