no user account on my windows xp!

Similar Questions

• Corruption, massive in almost all of the network services user account and firewall Windows

  Win 7 Pro SP 1. An account with administrator privileges. Domestic wireless access to a router; D-link devices. System was working fine until about seven 2 (and I pointed out some Windows updates installed September 1, but don't think it's relevant). Computer users allege no unusual behavior on their part Analyses of viruses from Windows Defender and Avast free were clear. Restoring from a previous restore point (two different ones) has not solved the problem - the restore points were date known system OK. Corruption has been maintained despite the restorations (worked and failed).

  A complaint that has lost network access. On the survey, found that all these symptoms mentioned below, and no doubt other symptoms exist that I am not aware of. The solution was to create a new user account, and which restored massive configuration problems.

  Symptoms:

  1 Windows Firewall could not turn on. Yes, I looked at the KBs regarding this issue (basic dependencies does not and so on) and tried individual hotfixes from the KB, without success.

  2. in the network sharing Center, there was no display of the usual icons at the top of this window. Those who show the personal computer connected to the router connected to the internet. Error message displayed re no dependence of base.

  3. it is possible to send signals between the USB wireless device on the computer and the wireless router. In the task area, the Windows message was 'limited connectivity', something like that. It was possible to connect and disconnect using this facility. But no internet access, notes.

  4. the resolution of the problems would not be executed. The message was that political diagnostics are not running. All attempts to start this service (with its two assistance services) has failed. Tried the individual patches of the relevant KB (wearing mostly on change permissions in the registry at some points), which failed.

  5. in addition, the Dhcp client service would not be executed. Once again, among the KBs tried the proposed fix on the permissions change, which failed. (Omitted in the sense that I could not always start the service; editing the registry was fine).

  5. firewall KB contained a file "beats" that you can create and run, I did, and another had similar commands (start and stop some services) that could be run in a command window. Both failed on some services - especially Mspsvc (Microsoft protection Service) - Although the success was shown to other services.

  6. when I created a new user profile, I re-entered the registry permissions in some of these places just to see what was different. In the damaged user profile, what was missing, it was the standard system of services (about 3 or 4 of them; things like the name of Dhcp). What showed was the News user account (for the specific user account; administrator; and two more points).

  Telling me that something has released a complete subsystem or three. Never seen this behaviour before.

  Would be nice to have an idea where to look for a fix / restore procedure.

  DonM

  Hello

  Thank you for providing us with brief information on the specific issue that you are facing the computer.

  I would like to know, have you been able to access the network on the new user profile?

  As you have tried several steps including the change of permission for the registry value and run the batch file, I would ask to perform Scan SFC.

  System File Checker is a Windows utility that allows users to find corruptions in Windows system files and restore the damaged files.

  For more information on how to scan SFC, please see the Microsoft Support Article below.

  Use the System File Checker tool to repair missing or corrupted system files

  Let us know the results of the SFC Scan, so that we can help you further.

• I can't change the image in my user account, I have Windows 7

  When I opened my departure and see the menu - my user account image that I tried to change, but it does not have to transform another image

  Hello

  Configure the computer to clean boot and then try to change the photo and check.
  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/kb/929135
  Note: When the diagnosis is complete, don't forget to reset your computer to normal startup. Follow step 7 in the above article.

  See also:
  Choose a picture for your user account and start menu

  http://Windows.Microsoft.com/en-us/Windows7/choose-a-picture-for-your-user-account-and-start-menu

  I hope this helps.

• How many user accounts can use windows via VMware Fusion?

  I installed the latest version of fusion on my machine and a copy of windows XP. It is very good and I am impressed by the ease and speed of it. However, I am the administrator and my 3 kids have accounts of users on the same computer. When my son connects to his user account and Fusion to do some homework on one only program windows at startup, it is not a virtual machine at startup. This means that using merge I cannot use a mac user account? Can I move the windows folder to a location for all to use or y at - it a setting I need to change in Fusion? Maybe, I need to install windows again on his account. If Yes this will cause other potential problems and hog hard disk space unnecessarily. I would prefer merger to the boot camp because I need for windows and mac at the same time. Any help would be appreciated.

  Welcome to the forums!  Yes, you can use XP with multiple users.

  There is some info on this in the Beginner's Guide to VMware Fusion

  Here is an excerpt:

  Only one person can be using the VM to

  a time (and the fast user switching does not count). Suspension (and

  maybe taken snapshot) the VM will probably cause others to not

  be able to use the virtual machine.

  Important: whenever you produce operations (move, copy, edition, deletion, etc.) in a virtual machine, make sure it is turned off and the Fusion is not running. You don't want to change data in Fusion.

  To do this, are the main things you need to do:

  • Move the virtual machine to a shared location for others users can access

  • • An example of this is/Users/Shared /.

  • Change the permissions so that any user can access the virtual machine

  • • In the Finder, select the virtual machine, and then select read the information. Then
      "Ownership and permissions > other" change "read and write".
      (I don't know if you need to do this also for access to the Group). You too
      need to do this for the contents of the virtual machine - do not forget the forest earlier
      on how to get inside a package? And repeat the Get Info
      correction on everything in the bundle

  The Beginner Guide to VMware Fusion

• Is there a way to hide the image of user account on the windows login screen?

  I am trying to find a way to hide the user account picture, because it does not match the custom wallpaper that I've put on to the login screen.

  We can change the image to something less offensive (even an empty frame - the procedure of which is in this article:http://smallvoid.com/article/vista-welcome-screen.html), but they cannot be removed entirely.  If you want the Welcome screen, you will have to live with the icons.

  Sorry, but this option is being Setup.

  I hope this helps.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• How to remove a user account remotely in Windows 8 Pro?

  Hey people!

  I have a rather embarrassing question here, which is not urgent, but gives me great concern.
  I am an administrator as COMPUTER technician (sort of... without... self-taught qualifications only) to a small property management organization.
  I am currently looking for another job, and when you want to leave I might have is any more access to the desktop. I have always (it's the PC I am writing this post since).
  I am connected with my private microsoft account, even I use it everywhere, including my own laptop computers and the family too. Needless to say that there is information only I have access to, but I didn't want any hack - in a tent in the future. After all, this is my personal account.
  Is there a way to not just turn off sync and access to my account on this computer, but force the system to delete my files on this computer using my account from another computer? even if the files cannot be removed remotely (they are encrypted), if there is a way to prevent my account appears in the settings and the user selection screen would be a great help.
  Please note that, from now on, I need to have my account on this PC so that I can access information on the server of office on the fly if needed.
  Any ideas?
  Thanks in advance
  PS: Yes, I said I am a technician, but please note that it is not my job. I'm more in the development of a set of security features of Windows. Everything I know about computers come from self-education (experiences and failures in my childhood), and even though I consider myself a very thorough person, beyond the level of the user, I have to admit that I'm not an expert. especially when it comes to advanced safety features. but my mind is open to suggestions and ideas...

  There is no one way to do this unless you have the device software and server management suites.  So basically, not unless you are a massive company.  But even in this case, there is no absolute guarantee, because the company could just disconnect the network and then you'd never a way to send a command to this computer anyway to clear it.  So any local administrator on the computer can still watch all the files, regardless of what protection/security configure you (administrators are like God: they can always see everything without any restrictions at all).

• Unable to access user account after installing Windows updates.

  Original title: Windows 7 Edition home premium

  Today, that my system updates all 27 of them, after the fine updates appeared, machine started and I get the page where it shows my users, but when I click the user he thought for a few seconds and goes back directly to the user's page.  The only other thing on this page is the close button and the access button that offers nothing of use.  Please help me.  I tried to use the F1, F8 and F12 key at first upward, and nothing helps.  It's as if the computer is locked.

  Thank you

  Andie

  Hello

  Thanks for posting your query to the Microsoft forum. I will definitely help you with this.

  Who update of Windows have been installed recently?

  This problem can occur either due to start-up files Windows corrupted or if the master boot record and boot sector is damaged.

  I suggest you do the Startup Repair and check.

  What are the system recovery options in Windows?

  Please post back with the results and the information requested, we will be happy to help you further.

  _______________

  Thank you best regards &,.

  Isha Soni

• How to enable a download file for one user account controlled by Windows Live family safety?

  When my employee attempts to the weekly schedule on our Web site in the form of a. PDF file, the file download is blocked by Windows Live Family Safety. Block message says he must ask permission to download the file. When I go into parental control settings, under the supervision of the activity, I can see the file which was blocked, but I don't see an option to allow the download of the file.

  Hello

  The question you have posted is related to family and security and would be better suited to the Windows Live community. Please visit the link below to find a community that will support what ask you:

  http://www.windowslivehelp.com/product.aspx?ProductID=4

• How to reset the password forgot Windows user account

  I need Toshiba password reset! How can I reset Toshiba laptop? I know you if you help me Toshiba password recovery, etc. Well well, so often to address these issues in our lives. Today, we share a few ways to reset the password of Toshiba.

  Solution1: Toshiba recovery disks help reset lost password

  It only works if we have created the CD or recovery discs before that we have forgotten the password. The next appearing is the steps to reset the Toshiba Windows 7 recovery disk:
  a. start the PC, log on to Windows 7 and insert a USB flash drive in the driver.
  b. start-> Control Panel-> user accounts and of the safety of the family->-> create a user accounts password reset disk.
  c. in the Welcome screen click Next and select the inserted USB, click Next.
  d. Enter the password in the password field and click Next. When the progress indicator displays 100% complete, click Finish to exit. Remove the driver USB of PC.
  The method is similar to create a Toshiba restore CD. Now the password of Toshiba Windows 7 recovery disk is ok. Put it in a safe place for people can use to reset your password.
  Steps to recover the password with the created password reset disk Toshiba:
  e. click on reset password in Windows 7 logon window.
  f. Insert the USB Toshiba Recovery disk created in the USB driver interface, and then click Reset password' to open the password reset Wizard. Click next to continue.
  g. Choose this Toshiba USB drive recovery in the drop-down list. Click next to continue.
  h. enter a new password and re-enter a second time to confirm. Click next and finish to close the wizard.

  Option2: Reset Toshiba laptop for accounts with administrator rights

  If there is default or built-in Administrator account or other accounts with rights and administrator privileges, we can use it to Toshiba bypass password. Take example of Toshiba XP Recovery:
  System A. Boot mode safe mode by pressing F8 when PC stars.
  B. PC access by the available account with administrator rights and of privileges.
  C. start - users and groups lusrmgr.msc in the search ENTRY - local users and groups - box choose users.
  D. make a right-click the account with password unlocked, select set the password and enter and confirm the new password.

  Solution3: Toshiba Reset password with the ISO image file burn

  We can burn .iso on a bootable USB stick or a CD/DVD disc image file and reset the forgotten password quickly and easily. Take one of the most popular tool to reset the Windows Ainorsoft Windows Password Recovery password as an example:
  a. download the program from an accessible PC;
  b. burn the file .iso on a blank CD/DVD or USB drive.
  c. work around the lost password of Toshiba with the CD/DVD on the PC locked.

  Things will be difficult if we know the methods of Toshiba pass reset once we forgot password for Toshiba laptop! Be sure to share them with your friends!

  Thanks for sharing this, but we always talk about password of Toshiba, it won't and I think this might be a bit confusing, it is of a workaround for the windows user account password.

  As much as I know there is no password defined by Toshiba.

  The user can define the user account password in windows if necessary so that this workaround solution describes how to remove a user account Windows password that is common to all computers with the preinstalled Windows operating system.

  However, thanks for posting ;)

• In the window user accounts, can not click on user accounts.

  Hello

  In Windows 2008 server, I can not click "user accounts" on the windows of "User accounts" due to no hyperlink with the label. How can I solve this problem? Access user is an administrator.  Thank you.

  Osamu

  Hello

  Thanks for posting your question in the Microsoft answers Forum. Your question it will be better answered by the experts in the Forums of TechNet Windows Sever. Please repost your question here.

• How can I permamnetly delete the user account in Windows xp?

  How can I permamnetly delete the user account in Windows xp?

  1. 1

     Go to the control panel. There are several ways to do this, but the most common is to go to the Windows Start menu and click on "Control Panel" on the right side. Follow whatever it is more convenient for you.

     
  2. 2

     Click on "user accounts" in the window that appears. Or, you see the standard view (with lines of icons) or the display of the categories (which is explicit). Both have a shortcut to the user accounts Control Panel.

     
  3. 3

     If a control panel is not yet made, click the 'user accounts' Panel at the bottom of the window. If so, you can skip this step.

     
  4. 4

     Click the link you want to get rid of any user account.

     
  5. 5

     The next window will have a list of actions you can do for the user account, one of which will be "remove account". It is the action that you'll want to click on.

     
  6. 6

     The last window that you will see will ask you if you want to keep the soon-to-be-used user represents the files in a folder on your desktop. It's your choice here.

     
     • If you have already backed up all important data on this user account, you can safely click on 'delete files '.
     • If you do not, you must click "keep files".
  7. Kind regards
  Amith Malherbe

• The Windows XP user account password

  I have three user accounts on my Windows XP.  I have not used the PC for about 12 months I bought a laptop with Vista.  Now when I go to log in my it requires a password to the user.  I forgot my password & can not see an icon give me an indication of password. The same goes for the other user account & the third account is a guest account that is accessible.  I have docs & itunes on users whose passwords are asked for. Can you provide me with a solution to the problem please.  Is there a button index of password?

  If you have set a password hint, you can see by clicking on the question mark next to the box to enter your password on the Welcome screen.

• Switching between user accounts my Windows Firewall is still disabled?

  Recently created a new user account on my Windows Vista just for my girlfriend and I can keep things separate and I noticed that whenever I connect to the newly created user account, it goes through the normal boot process but then I see that the shield of WF on the bottom right of the screen is red and it warns me that the Windows Firewall is not on.  I can simply click and put it back on but why is - this?  Whenever I sign with my other user account, the firewall is already turned on.  I think I checked all the appropriate settings, but I can't work. It would be a disappointment if the firewall must be enabled manually whenever it connects...

  Humor me.

  Create an another useraccount with exactly the same type of account that you have problems with.
  Ligon to this newly created account. Is also turned off firewall on ot?

  If the firewall is OK to this new account, then for some reason the other account is damaged.

  Here's the tutorial on how to deal with the corrupted user profile (account):

  http://Windows.Microsoft.com/en-CA/Windows-Vista/fix-a-corrupted-user-profile

  Difficulty of a corrupted user profile

  Note: You must have at least three user accounts on the computer to perform these operations, including the new account that you created.

• I forgot my user account log the password for windows 7

  I forgot my log of user account password for windows 7 I use the fingerprint option to open a session if did not use the option of password for the age is there a way to reset it

  In fact, you want to do much more, especially the following:

  • Create and test a second admin account, and then save its details.
  • Create a password reset disk. Click Start, click Help, and then search for help on "reset disk".

  Here's how you can reset your password.
  1. open a session.
  2. click on start.
  3. type the three letters cmd in the search box.
  4. press on Ctrl + Shift + Enter
  5. click on "run as Administrator".
  6. type the following command and press ENTER:
  NET user "user %%nom" 123456
  This command will set your password to 123456.

• User account control does not not correctly under WIndows 7.

  I'm having a problem with the user account control.  It appears each time I run a program, even if my settings are different.  How can I fix?

  Hi Clukin,

  Thanks for choosing Microsoft Community Forums.

  According to the description, I understand that you have a problem with user account control in Windows 7.

  To help better please answer these questions:

  1. do you use the administrator account?

  2. the problem occurs with specific program or the whole?

  3. what anti-virus program do you use?

  4 did you do changes on the computer before the show?

  I suggest you follow the method provided to fix the problem:

  Method 1: You can not change the settings on Windows 7 (UAC) user account control

  http://support.Microsoft.com/kb/978591

  Method 2: Turn off the antivirus software

  http://Windows.Microsoft.com/en-GB/Windows7/disable-antivirus-software

  Important note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.

  Links:

  User account control

  http://Windows.Microsoft.com/en-GB/Windows7/products/features/user-account-control

  Guided Help: adjust the settings of user account control in Windows 7

  http://support.Microsoft.com/kb/975787

  Note: User Account Control (UAC) can help you to prevent your computer from unauthorized changes. It works by asking permission when a task requires administrative rights, such as installing software or changing settings affecting other users. We do not recommend disable user account control. If you turn it off, you must reactivate as soon as possible.

  For the related issue of Windows or anything related to the Windows operating system, do not hesitate to contact us and we will be happy to help you.