Add the hot spare on Poweredge T430

Similar Questions

• Has no disk in MD3000i - no not the kick in hot spare

  Hello

  I'm having a lot of problems with this table.

  First a defective disc.  The hot spare does not activate.  Or maybe that was the case, but it did not work because I got an error message "physical disk failure - failure of reconstruction.

  Then another disc has no so the vdisk went offline.

  We had a spare provided and it was put in the table.  But when I go on change-> replace the physical disks in Storage Manager it tells me that "there no physical disk defective or missing in this storage array that can be replaced by using the function to replace physical disks."

  How can I go about getting the vdisk upward and execution?

  Thank you

  Steve

  If after looking at the beam of support I see where you have the 2 has no drives hard and saw where reconstruction has failed. I see that FW is a bit outdated, but this is not to say exactly why reconstruction failed. I guess you don't have access to the data on the VD. The disc in the slot 0.1 seems to be the last disk that failed. An option that we would try to force online and get the table in a degraded state, so that we can have a backup if you have not already. However, if you do not have a backup your best bet would be to get the 2 new drives and re - create the RAID array and restore your data.

  To force the disk online, you will need to enter the SMCli and use the command:

  SMcli - n {name} - c "revive physicalDisk [0,1];

  If this does not work and that you are not able to get a backup copy, then I recommend you get in on a company like lead investors to 1-800-440-1904. Please let me know if you have any questions or concerns.

• Add the new hard drive into the data store in ESXi 4.1

  Hi all

  I got ESX 4.1 installed on the Dell server, and I have 3 virtual machines on a data store.

  I added a new 500 GB scsi hard drive to the server,

  and I need to add it to the datasore or create a new...

  How can I see this new hard drive? and add it to the data store?

  Waiting for your help.

  concerning

  Abrams

  Oracle system engineer

  Abrams,

  That's all I can help you.  These instructions are based on the Perc 5 / i controller, which I think you have on our system.  You have not specified the server so I just assumed that this is so.

  1. unscrew the hot spare that you just made.  Follow this link from Dell.
  http://support.Dell.com/support/eDOCS/storage/RAID/PERC5/en/UG/HTML/chapterh.htm#wp1061343

  2 follow the link for the installation of virtual disks - http://support.dell.com/support/edocs/storage/RAID/PERC5/en/UG/HTML/chapterh.htm#wp1069357

  This link has three steps to void, skip the step on "spare parts of designate hot."
  a. create the virtual disks and select virtual disk options.   -Online steps to create another disk group and add the new disk to the disk group.
  (b) designate the drives hot spares (optional). =>, YOU CAN SKIP THIS STEP
  c. initialize virtual disks. -online must do.  just do not initialize the incorrect disk.

  After the step #2 c, you should be able to access the drive in ESXi or command-line (list of nmp esxcli devices).

  And no, you cannot add this manaully until do you step #2 above which is to define the disk group, creating virtual disks and initialize the virtual disk.

  Good luck.

• Reference Dell MD3220 virtual disk - hot spare in use

  We have a Dell MD3220.  one of the hard drives was taken out by an end-user trying to exchange a defective disc. Then after that the good player has replaced the old drive was placed back into the appropriate slot. Now we have a hot spare (enclosure 0, slot 23) in lieu of an another hot spare (attachment 2, slot 22). The hot spare that is subbed for has been replaced by two new hard drives now and the hot spare in use has still not disappeared. any suggestions on what to do next?

  Virtual disk - hot spare in use

  Storage array: MD3220
  Disk group: 2
    Physical disk failure in the: attachment 2, slot 22
       Action (deletion) enabled service:  NO. 
         LED of action on service component:  NO.
    Replaced with a physical disk to: enclosure 0, slot 23
    Virtual disks: 3
       RAID level: 5
       Status:  Gradient

  Hello, GalaxyTechService.

  It is perhaps not as complicated as it may seem, in fact. There is a wizard that you can use to return the disk to the raid set. Right-click the affected virtual disk and select 'Replace physical disk' and use the wizard that opens.

  In the upper area will be "missing disks", and in the lower field will be options available to replace them.

  Then just follow the steps.

  Let me know how it goes.

• Md3220 and md1220 combo, how to configure any global hot spare parts.

  The MD3220 is full of 300 GB 15K SAS drives the MD1220 is full 1 TB NL 'SAS' 7.2 K disks. The two boxes have discs 22 & 23 unused in the goal is relief. However all the mechanisms that I use to create hot household simply attaches all four disks to two speakers. I'd rather have two spare drives only protect readers in their own enclosure. Interestingly enough, I asked the software dell 'automatic configuration' (sic) the hot spare and he decided ONLY two use 1 TB drives and use them to protect the two speakers. In addition, I was quite puzzled as to why he also allowed me to do it manually the absurd configuration to allow a 300 GB drive protect a forum composed of 24 1 TB disks. In any case, is it possible to have host associated with a case (or disk group) spare parts. ? Thank you.

  You can't dedicate a hot spare in a picture of MD3k-series. If a hot spare will succeed for any player in any long case that the size of the spare drive is the same or larger than the failed drive.

• 2950 HDD D80A Firmware Update for the dedicated hot spares

  I have a 2950 III with 8 Fujitsu 146 GB drives installed in a RAID 10 array. The first six discs are configured for use in a virtual disk with the last two records configured to be used as a dedicated hot spare. OMSA describes the version of the firmware of these two disks 0102. I ran the update of the firmware as described here:

  http://www.Dell.com/support/drivers/us/en/04/DriverDetails/product/PowerEdge-2950?driverId=F50fd

  The six drives in the virtual disk just successfully upgraded to the version of the firmware D80A. Two rescue disks have not been tempted. I tried to run the Setup again and Setup note that installed and packaged versions are both D80A, but OMSA said that two rescue disks are always at 0102.

  This is expected behavior? Spare disks are treated differently? If so, the firmware update as they are now or have I trade in the virtual disk to do the upgrade?

  The link does not work for me earlier... it's working now.  There is also a utility 'nautilus' which can be used on Dell readers... it will update all readers of Dell, regardless of the make and model... preventing you from having to download a dozen different services.

  Yes, that is why the update is a failure: Dell firmware cannot be updated with the firmware of the sale to the retail/credits, and retail/Generic firmware cannot be updated with the Dell firmware.

• Change your state of global hot spare on loan

  Question 1: I have a reference dell power edge 2950 with perc 6 / i integrated. I have four 450 GB RAID 5 drives, a disk as a global hot spare, and a disk without operating with State loans. Can I change the State of this hot spare to prepare so I can add another raid 1 logic with two 450 GB drives? Should what steps I take?

  Question 2: Physical disk 0:0:1 is damaged and I need to replace it. As I said I have a disk without exploitation, disc 1:0:5. Can I remove the drive without exploitation and replace the damaged one(0:0:1); remove the disc at the same time two will damage the server?

  1. Yes. You must delete the assignment the rescue. This is done either on the display of physical disks (World Relief) or virtual disks (dedicated relief).

  2. remove both drives at the same time will not damage the server. This will damage your table if you remove two ACTIVE RAID 5 with disks, but not a relief. Remove the drive bad "to hot' (do not feed out to replace), and then insert the disc before doing nothing).

• Screensaver not working only not with the hot corner

  I used to have my screensaver set to start with the upper left corner of my screen using the feature 'hot corner '.

  However, lately, he doesn't. I tested it with all the other corners, and it does not work.

  I tried other functions with the hot corners and they all work very well. This is just the screensaver that does not work.

  I can set the timer and lights up the screen saver, but not with the hot corner.

  Someone can help me with this, or have any suggestions?

  See you soon!

  Hello Kaijuman,

  Thank you for using communities of Apple Support.

  I understand that when you try to start the screen saver by using Active corners it is not. I would like you to test this behavior then starts in safe mode, and then try another user account on your Mac.

  Start in safe mode

  Follow these steps to start in safe mode.

  1. Start or restart your Mac.
  2. As soon as you hear the startup tone, hold down the SHIFT key.
  3. Release the SHIFT key when you see the logo Apple appears on the screen.

  After the Apple logo appears, this may take longer than usual to reach the login screen or your office. This is because your Mac performs a check of directory of your drive to boot in safe mode.

  To leave safe mode, restart your computer without pressing any key during startup

  How to test with another user account

  You can find out if unexpected behavior is related to the user file or a parameter in trying to reproduce the problem to a different user account. This process includes creating a new user account, connect to it and test for the issue.

  Create a test user account

  1. In the Apple menu, choose System Preferences.
  2. Click the users and groups in the System Preferences window.
  3. Click the lock icon and enter an administrator name and password.
  4. Click on the button Add (+) below the list of users.
  5. Choose a type of user in the new pop-up menu.
  6. Give the user a name and first name, account name, and password.
  7. Click OK.
  8. Close the System Preferences window.

  Connect to the test user account

  Log out of your current user account by choosing logout in the Apple menu, and then open a session the new account that you created. If you are prompted to login with your iCloud or Apple ID account when you log in, skip this step.

  Try to reproduce the problem

  Please let us know what the outcome is so we can help you.

  See you soon.

• Reuse a RAID disk and hot spare procedure

  My questions are for a PE R720xd with the PERC RAID internal H710P controller.

  I have replaced several RAID drives in the past, but I never did this before, so I was hoping to confirm my procedure for hard drives hot swap. A drive failed on one of my live servers. In the past I would always bring back the server during a maintenance window and replace the drive by using the configuration utility to make sure everything went correctly. This particular server has become a system of very high availability, so I was hoping to use for hot spare option do without bring down the server.

  The other issue is that Dell is not in stock on the disk, I need so I intend to use a same car I replaced recently on a server off-production that has already been fixed in a RAID1 in another Dell R720 Server table. Any time, I have never replaced a RAID drive, I always used a new drive out-of-the-box, so I'm also not 100% on how to prepare the drive to use for a new RAID array.

  I thought I am brings the donor server down and come off the drive I want to enjoy this the RAID array server using the configuration utility. So a question is - is there anything else I need to do preparation used in car for use in the new table?

  With respect to hot-swapping which lead to the new array, is it really as simple as just popping one out and put a new in? Can I do to confirm it has taken - apart from just confirming that the lights blink like crazy during synchronization?

  Thanks for your understanding!

  C.Short,

  You can switch the drive, but it will be not just to rebuild there is data on the hard drive. So when this disc is inserted, it will show foreign. You will need to do is to boot to the controller (Ctrl + R) and then CLEAR the foreign Configuration. Once completed, then you will be able to rebuild the disk on the virtual disk, you can do the BIOS of the controller, or from the OpenManage web interface (depending on the operating system).

  Let me know if it helps.

• Add the disk to the PERC H700 of RAID integrated table 5

  Hi all.

  I have currently a Dell PowerEdge R710 configured with 4 SAS - 2 10 146 k Seagate 2.5 "drives in a Perc h700 integrated Bay RAID-5. I ordered a SAS-2 10 146 k disk Seagate 2.5 "to add to the Bay RAID-5 storage, making it a 5-disc set. What is the best way to add the drive to the RAID-5 array without losing any data? I have OpenManage Server Admin on the server.

  OS: Windows Server 2003 R2 32 BIT

  You can use OMSA... go in storage, PERC, virtual disks and select Reconfigure in the drop-down list of tasks available for your RAID 5.  This will add the disk to your RAID 5, then you will need to adjust the partitions in Windows once it is completed.

• RAID 5 Config of hot spare

  Hello

  I have setup a R510 with raid 5 with 2 drives hot spares. Let's say a player fail and the HS kick, then I replaced the bad HD. What happens to the reader that is initially configured as a hot spare? It resets as a hot spare, or do I need to reconfigure and make HS default again?

  Source language:

  0 - active

  1 - active

  2 - active

  3 assets

  4 - active

  5. HS

  6 HS

  ++++++++

  After the failure of the HD.

  0 - active

  1 - active

  2 - active

  3 assets

  4 bad

  5 assets (reconstruction)

  6 HS

  +++++

  After that HD has been replaced;

  0 - active

  1 - active

  2 - active

  3 assets

  4 - ? (does it become the active drive yet?)

  5 - ? (this becomes HS again?)

  6 HS

  Thank you

  Once relief rebuilt, he is an active member of the table. The new disks in the system will have to manually assign as the new hot spare.

• Can the two versions of Windows 7 installed once on two disks be used for the hot with the same PC swap

  I want to use the same key to install Windows 7 on two different HARD drives and use them one at a time on the same PC.

  I have a hot spare disk Bay. I want to be able to exchange the HARD disk for troubleshooting Windows etc. Should I buy another key?

  I just realized that some information I have given is incorrect.

  I have not installed a new copy of Windows 7 on the second disc. I actually reconfigured it with an image of the first hard drive.

  In this case can I leave Windows on the second disk, and exchange them warm without any problem?

  I've heard people cloning the C drive and there change places if anything ever goes wrong.

  Would not be Windows treats the second disc I've reconfigured as a cloned disk?

  Keylonta:

  You are right. If you clone a drive with a good installation running, the system knows no difference between readers. It works simply. It is not request a new activation if Exchange you them.

  Similarly, if you use something like Acronis to make an image (complete backup of the drive) and then burn that image on a new disk, the system accepts the new drive as the former and, once again, do not request a reactivation.

• Add the short name field for specifications in the XSL file

  Hello

  I'm looking for help to see if it is possible to add the short name for the inputs and spare field in a specification of Formulation in the XSL file. If it is possible, how can I do this?

  Thanks in advance.

  Well, CSS is much more locked, by design. So it's a little (or maybe a lot) more complicated.

  Also remember that if you change the CSS schema, and you use the web service contract that we provide for the CSS message, then the approach will probably be different. This means that the web service contract would not support additional XML nodes, unless he expects them.

  If you do not use our web service contract, then you could make changes in the XML in a different way. Can you elaborate on how you receive the message in CSS?

  Basically, if you use the web service method, then you will probably need to use the ExportExtensions method, which is documented in the CSS guide. ExportExtensions allows you to include xml code in a node specific extensibility through managers, which are classes that you configure in the config\extensions\exportExtensions.xml configuration file. It is currently the custom how sections are included in syndication. So you can add your own XML nodes and call you a custom class to provide additional data that you need.

• How do I add the complication of weather

  Hi all

  I "hid" my current and retired from the weather app iPhone apps. I didn't far enough to see who would remove the app Apple Watch too. So I reinstalled the weather on iPhone, but the complication of quarter will not return. How to re - add the complication?

  Using iOS 10 and watch OS 3.

  Hello

  The following steps may help:

  • Restart your iPhone and your watch:
    • Close the two devices together, and then restart your iPhone first.
      • Restart your iPhone, iPad or iPod touch - Apple Support
      • Restart your Apple Watch - Apple Support
  • Disable the twinning and re - pair your watch:
    • The app shows on your iPhone takes a backup of your watch automatically when the disparity with the app choose to restore from backup during the whole upward. Most of the data and settings will be restored, with a few exceptions (for example cards Pay Apple, access code).
    • Cancel the twinning of your iPhone - Apple and Apple Watch Support
    • Set up your Apple Watch - Apple Support

• I added a few. WAV files and you want to add the artist names and album

  I added a few. Recording WAV files form a USB turntable.  How can I add the name of the artist and album in iTunes before you convert them into MP3 files to load on a player MP #?

  For all types of files you can call by clicking on the location of the name / artist, when it is selected. It should be more when you convert the.