changed printers for hp5510 to hp6520 and removed 5519 programs

Similar Questions

• I want to allocate more disk space for my c drive and remove the drive d

  I want to allocate more disk space for my c drive and remove the drive d. I 26 gig on the d drive and only using less than 1% of it, and I have the same amount on c, but only 39% c left. How to do this.

  LEM explained the problems that you tried to resize partitions on the same drive.

  You can create more free space in C in carrying one of the measures suggested below.

  The default allocation for the restoration of the system is 12% on your C partition is more generous. I have them would be reduced by 700 MB. Make my computer right click on your icon, and select System Restore. Place the cursor on your C drive select settings but this time find the slider and drag it to the left until it shows 700 MB and output. When you get to the settings screen, click on apply and OK and leave.

  A flaw that might be useless which is for temporary internet files, especially if you keep no copies on the disk offline. Setting the default value is 3% of the walk. Depending on your attitude to copies offline, you could bring it to 1% or 2%. In Internet Explorer, select Tools, Internet Options, general, temporary Internet files, settings to make the change. At the same time, look at the number of days, the story stands.

  The default allocation for the basket is 10% of the disk. Change to 5%, which should be enough. In Windows Explorer hover over your Recycle Bin, right click and select Properties, Global and move the slider from 10% to 5%. However, try to let you become so complete that if it is complete and you delete a file by mistake it will bypass the Recycle Bin and have gone forever.

  You can generate more space in the system (usually C) the folder move partition.

  For temporary Internet files, select Start, Control Panel, Internet Options, temporary Internet files. Settings and move back.

  To move the storage folder Outlook Express select from Outlook Express Tools, Options, maintenance, store folder and change.  http://www.tomsterdam.com/insideoe/files/store.htm.

  How to change the default location of the My Documents folder: http://support.microsoft.com/?id=310147

  You may also change the default locations of the files in Microsoft Office programs when you choose to move the My Documents folder. For Word, go to tools, Options, file locations, highlight the Documents, click on edit and change the path. For Excel, go to tools, Options, general, and change the default path.

  My Documents is one of the many the created system of special folders, which include my pictures, and my music. It can be more easily modified using TweakUi. Download TweakUI, one of MS powertoys, here: http://www.microsoft.com/windowsxp/pro/downloads/powertoys.asp.

  In TweakUi, select workstation, special folders. You can scroll down to see the full list of special folders to the left of the button to change the location.

  You can move programs, but to do this, you must uninstall and reinstall the program. With Word and Excel, the existing data files are not affected by reinstalling. Most of the work in question is going to be reinstall all updates issued after those that are included with the original Microsoft CD / DVD.

  If your drive is formatted as NTFS another potential gain arises with your operating system on your C drive. In the Windows directory of your C partition you will some uninstall files in your Windows folder in general: $NtServicePackUninstall$ and $NtUninstallKB282010$ etc. These files can be compressed or not compressed. If compressed text the name of the folder appears in blue. If these files are not compressed you can compress. Right-click on each folder and select Properties, general, advanced, and check the box before you compress contents to save disk space. On the general tab, you can see the winning amount by deducting the size on disk size. File compression is only an option on an NTFS formatted disk partition / partition.

  I'd be interested to see a report of Disk Defragmenter. Open Disk Defragmenter and click analysis. Select view report, and then click Save as and save. Now find VolumeC.txt in your My Documents folder. Open the file, place the cursor anywhere in the file, select Edition, select all to select all the text and copy and paste into the body of your message. To do this, before you run Disk Defragmenter because it is more informative.

  Select Start, all programs, accessories, System Tools, cleaning disk to emptying your trash, delete temporary Internet files and other selected options. I recommend also you click Other Options, System Restore and delete all but the last system restore point. Run Disk Defragmenter

  Using the system restore option is most appropriate when your system is slow and you need to increase the free disk space on your C partition. If you have errors that could be solved by using the system restore to your system settings back to before that the error occurred initially, do not use this option.

  Select Start, Control Panel, Folder Options, view, advanced settings and check the box in front of "show files and folders" and 'Hide protected operating system files' are unchecked. You may need to scroll down to see the second element. You should also make sure that the box before "Hide extensions of known file types" is not checked. Notwithstanding, there are some files that are hidden. Again, you will not see the System Volume Information folder.

• my laptop suddenly stopped to connect to any bluetooth device. I restored my system and removed the programs installed before having this problem.

  my laptop suddenly stopped to connect to any bluetooth device. I restored my system and removed the programs installed before having this problem.

  Hi sh8kdown,

  Thanks for posting this question in the Microsoft Community!

  I understand that you can not connect to Bluetooth devices on the computer. I'm sorry for the inconvenience caused to you. Rest assured that I will do my level best to help you.

  (1) what is the brand and model of the computer?

  (2) what is the model number of the Bluetooth devices?

  (3) you get an error message?

  (4) did you of recent changes to the computer before the show?

  I suggest the following methods and check if it helps to solve the problem.

  Method 1: Open the hardware and devices Troubleshooter

  http://Windows.Microsoft.com/en-us/Windows7/open-the-hardware-and-devices-Troubleshooter

  Method 2: Troubleshoot issues with Bluetooth devices

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-Bluetooth-enabled-devices

  (Applicable to Windows 7 as well)

  Method 3: Error: "Pilot of Bluetooth device not found" when you try to connect a bluetooth device: http://support.Microsoft.com/kb/2654568 

  Reference:--

  Add a Bluetooth device to your computer: http://windows.microsoft.com/en-US/windows7/Add-a-Bluetooth-enabled-device-to-your-computer

  Change settings for a Bluetooth compatible device:

  http://Windows.Microsoft.com/en-us/Windows7/change-settings-for-a-Bluetooth-enabled-device

  It will be useful. For any other corresponding Windows help, do not hesitate to contact us and we will be happy to help you.

  Kind regards!

• How to remove the old version of outlook express where we cannot find in the box add and remove the program.

  I have a version of outlook 2007 and I would like to delete the old version of outlook, the old version is not appear in the add and remove program.what can I do?

  Hello

  It's actually a bit more complicated to do than of simply by clicking a button. Is there a particular reason you want to uninstall OE? It mgith be easier to leave and have Outlook 2007 works as your main e-mail program.

  If you do not want to uninstall, follow the detail what posted here.

  Log in your computer. Make sure that your account has administrative rights. Your CD-Rom drive must be empty. Remove any disc which can be inside.

  Double-click the "My Computer" icon on your desktop. Go to the 'Tools' menu and select 'Folder Options '. Click on "display".

  Go to the section "hide files and folders. Click on 'display the hidden files and folders '. Check the option "Hide extensions of known file types" to clear it. Click on, and then clear the checkbox "Hide protected operating system files." A dialog box with a warning message is displayed. Click on the Yes"" button. Close the "Folder Options" window by clicking "OK".

  Click on the button 'start '. Go to "Programs", then "Accessories". Choose "Windows Explorer".

  Find the following three files on your computer:
  1 C:\Program Files\Common Files\Microsoft Shared\Stationery
  2 C:\Documents and Settings\votrenomutilisateur\Application Data\Identities (or C:\Documents and Settings\YourUsername\Local Settings\Application Data\Identities)
  3 C:\Documents and Settings\YourUsername\Application Data\Microsoft\Address Book (or C:\Documents and Settings\YourUsername\Local Settings\Application Data\Address Book)

  Each of the folders that you located just rename. Click a folder, and then press "F2". Rename the files to: "old_stationery', 'old_identities' and"old_address." When you're done, rename each file, click on "Enter".

  Click again on 'Start' and select 'run '. In the "Open" box, type "regedit".

  Locate the following registry keys. Right click on each registry key and then select 'delete '.
  HKEY_LOCAL_MACHINE\Software\Microsoft\Outlook Express
  HKEY_LOCAL_MACHINE\Software\Microsoft\WAB
  HKEY_CURRENT_USER\Identities
  HKEY_CURRENT_USER\Software\Microsoft\Outlook Express
  HKEY_CURRENT_USER\Software\Microsoft\WAB
  HKEY_LOCAL_MACHINE \Software\Microsoft\Active Setup\Installed Windows\ {44BBA840-CC51-11CF-AAFA-00AA00B6015C}
  HKEY_LOCAL_MACHINE \Software\Microsoft\Active Setup\Installed Windows\ {7790769C-0471-11D2-AF11-00C04FA35D02}

  Exit the registry editor. Click on "Start" and click on "search". Click on "for files and folders.

  Find the following files on your computer:
  Inetcomm.dll

  C:\windows\system32\msoeacct.dll
  Msoert2.dll
  MSOE.dll
  Msoeres.dll
  MSIMN.exe
  Oeimport.dll
  OEMIGLIB.dll
  Oemig50.exe
  Setup50.exe
  WAB.exe
  Wabfind.dll
  C:\windows\system32\dllcache\wabimp.dll
  Wabmig.exe
  Csapi3t1.dll
  Directdb.dll
  Wab32.dll
  Wab32res.dll

  Click on each file and press 'F2 '. Rename each file to "filename. Old"(for example, inetcomm.old). Then press 'enter '. That, for each of the files listed in step 10. When Windows prompts you on the protection of the files, click "Cancel". Do not insert the Windows CD in your CD-Rom drive. When Windows prompts you to not recognize the file, click 'yes '.

• Users cannot change password for 802.1 x and implementation of ISE

  Hi all

  We have implemented cisco ISE 1.1 for a week and we notice that Microsoft active directory the user cannot change password there when it expired.

  We store all user account in Microsoft active directory for authentication and ISE is mapped with Microsoft active directory. Normally, when your expired password Microsoft active directory ask you to change your password, but in our case cisco switch or 802. 1 x do not allow communication with active directory before giving access to the network. Is this a configuration error or cisco do not support this?

  Best regards.

  Hello

  I have the same problem, did you find a solution?

  Thank you

• change the size of the table and remove the duplicate line

  Hello

  I run a program that does a for loop 3 times.  In each loop, the data are collected for x and y points (10 in this example).  How can I output the table with 30 points in a simple 2D array (size 2 x 30)?

  Moreover, from the table, how to delete duplicate rows that contain the same value of x?

  Thank you

  hiNi.

  He probaibly which would have allowed to attach a file that has a consecutive duplicate lines.

  Here is a simple solution.

• How can I find and remove unnecessary programs

  I have 72 gb of space & only 1 free

  Uninstall programs, you don't need or use. Control Panel / programs and features

  Use something like ccleaner it will remove the temporary files. If you get this, click to uncheck the options you want

• identify and remove redundant programs and files

  redundant programs and files

  Right-click on disk Local (c), click Properties, click on disk cleanup, wait the calculation completed, click More Options, choose what you want!

• Lack of disk space! Adding and removing unused programs?

  These programs are the only ones I have that take up considerable space of more than 150 + MB, everything is much smaller. How can I clear more space? I can't even do a defrag it says I have 0% disk space... Can you help me?

  Microsoft.NET Framework 3.0 Service Pack 2

  Microsoft.NET Framework 2.0 Service Pack 2

  See if this is enough,

  http://www.PAGESTART.com/NTUninstall.html

  http://www3.TELUS.NET/dandemar/spack.htm

• need to change password for root and oracle Linux

  Dear all,
  
  We have installed Oracle RAC server configured a year back. now, due to security reason has to change the root and oracle user password.
  so before changing the password, we want to know is there any impact on live server due to change password for the user root and oracle RAC.
  
  as we so oracle user equivalence if we change the password, it will work very well.
  
  Thank you
  Shir khan

  SHERKHAN wrote:
  Dear all,

  We have installed Oracle RAC server configured a year back. now, due to security reason has to change the root and oracle user password.
  so before changing the password, we want to know is there any impact on live server due to change password for the user root and oracle RAC.

  as we so oracle user equivalence if we change the password, it will work very well.

  No, there is no impact of the change to the password of user oracle/root on the equivalence of the user and RAC.

  Also check similar posts in the past:

  User OS password Oracle RAC environment change

  Concerning
  Rajesh

  Published by: Rajesh on August 25, 2010 11:26

• Vista - accounts - how to remove shortcuts from office (shortcuts to programs!) for an account without removing the program for another account.

  Help Cher,

  (1) I have the following accounts on my Vista Premium PC (Quad Core). Dad, Dad & mum, kidA, kidB. Some programs have a shortcut on multiple accounts, but these accounts do not have. It makes the overworked office. So I go to their desktop computer, press the shortcut and choose Delete. But it seems inevitable not to delete the program anywhere.

  (2) another point not clear to me, is that I expected to find items on the desktop to the C:\users\accountname or the D:\users\accountname. However, Dad's account is not present. Instead I find in the two readers on these posts my old account 'Eddy Kunnen', only in drive D the appropriate shortcuts are present under the desk. And the EddyKunnen account is also the only one on the D drive. I should find all items on the desktop under player: \users\accountname\desktop? And if so what could be wrong that Ii this account is not renamed to Dad. Is it possible to get all the C:\users\ accounts. Without doubt, I did something wrong in the past?

  Thank you in advance,

  Sincerely,

  Eddy

  Hello

  (1) desktop shortcuts are related either to the user or to all users. This means either:

  C:\Users\\Desktop (where is the name of the account)

  or

  C:\Users\Public\Desktop

  If a shortcut is located in the first folder, then it is specific to this user account. If in the second, it is common to all, so any action taken on this subject will apply to all accounts. If you don't want it in all accounts, copy it to the desktop folder corresponding to for those you do and remove of that Public.

  (2) you can change the name on an account, but it will not change the name of original in C:\Users. In other words, if the user creates an account, he will be under C:\Users\UserA. If subsequently, they changed their name to UserB, the real profile will always be under C:\Users\UserA regardless of the change of name, you cannot change this file name, only the friendly name of associated account. Thus, you cannot "relocate" the user account record without breaking a lot of things.
  Good luck, Rick Rogers, aka "Crazy" - Microsoft MVP http://mvp.support.microsoft.com Windows help - www.rickrogers.org

• REMOVE button missing in "Add or remove a program.

  Hello

  Y at - it ideas on how to button DELETE recovery in Add or remove programs?

  I can't remove the previous program, I installed now.

  I don't want to go to the folder in which the specific Uninstall.exe located to remove the installed software.

  Help.

  :(
  

  <.T.Y.>

  Hello

  ·        Where you can uninstall the program from the system before using Add and remove the feature?

  ·        Since when are you facing this problem?

  ·        Are what program you trying to remove the system?

  ·        Apart from this program you are able to remove other programs that are present in the add and remove programs list?

  Method 1:

  I suggest to remove the program from all programs (if the program is listed) and check if you are able to remove the program or not.

  a. Click Start and click all programs.

  b. Locate the program and check if there is an option to uninstall the program from there.

  c. If there is an option, then click on uninstall and remove the program from the system.

  I suggest you follow the steps mentioned in the article below.

  How to manually remove programs from the add tool / remove programs

  http://support.Microsoft.com/kb/314481

  Method 2:

  I suggest to do a SFC (System File Checker) scan on the system and check if the problem is resolved.

  a. Click Start, click principally made programs, accessories, right-click on command prompt and select run as administrator.

  b. click on continue or provide administrator credentials if prompted.

  c. in the type in the following command prompt window and press ENTER:

  d. sfc/scannow

  e. you should see the following message on the screen:

  § Begin the analysis of the system. This process will take time.

  § Beginning verification phase of system scan.

  f. % verification complete.

  g. once the scan is complete, a test to see if the problem you are experiencing is resolved or not.

  Description of Windows XP and Windows Server 2003 System File Checker (Sfc.exe)

  http://support.Microsoft.com/kb/310747

  Thanks and regards.

  Thahaseena M
  Microsoft Answers Support Engineer.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• In devices and printers, I have an icon for a laptop with a yellow exclamation point. I have a desktop computer and remove this icon of the laptop.

  A laptop once was connected to my desktop via USB cable PC; It belonged to me.  The owner wants to access its database of the company, but in vain.

  Now, in devices and printers, I have a laptop icon that is not one of my devices, but the Device Manager lists in "Other devices" with a (USB) universal serial bus controller, which is also included in the icon of the computer laptop properties under the material.  The yellow exclamation point is for troubleshooting.  The problem is: I do not own a laptop device.

  I want to remove the icon of the laptop and its inscriptions, including the (USB) universal serial bus controller.  Both are marked by a yellow exclamation point, but, of course, they do not work because they do not exist.  But this icon of the laptop has name my PC on it.

  My desktop PC should not be listed in devices and printers, does it?

  Hello.

  Open devices and printers right click on the device - remove the instrument.

• Impossible to update LR CC ~ my one day to change and nothing work updated my Mac and all LR will do is CRASH!  Need help.  Tried to stop CC and remove the 1.0 file already and who does not work for me.  What can I do?

  Impossible to update LR CC ~ my one day to change and nothing work updated my Mac and all LR will do is CRASH!  Need help.  Tried to stop CC and remove the 1.0 file already and who does not work for me.  What can I do?

  If lr crashes repeatedly, reset preferences.   http://www.lightroomforums.NET/showthread.php?14226-resetting-%28or-trashing-%29-the-light file-Preferences-room

• After the removal of a virus, I can't connect to the internet, is looking for an IP address, and the RPC server is unavailable, said

  My netbook has a virus so I did a scan and remove infected files and a program which the virus attached itself to.  Now, I can not connect to the internet.  He is looking for an IP address, and he also says that the RPC server is unavailable.  Any ideas?  Help

  Hello

  Step 1: Start your computer in safe mode, and then try to start the Remote Procedure Call (RPC) services and start the computer in a clean boot
  a. Click Start, type services.msc and press to enter.
  b. in the list of services, double-click Remote Procedure Call services.
  c. change the startup type to automatic, and then click Start.
  d. click ok to apply the changes.

  Reference: http://windows.microsoft.com/en-US/windows7/what-is-safe-mode