Changed the domain to a different workgroup name cannot entry windows more.

Similar Questions

• My theme tab in display properties is unusable. How can I change the theme in a different way?

  How can I change a theme in a different way, not not not using the properties of display/theme?
  Because this tab is just lika a image - there is nothing clickable, none of the functions to work.
  I need for you to tell me how to change the themes in a different way, even if it is very complicated, or you could tell me where I can download a file that I need to replace the old works is not a (one that works on this theme unusable tab)

  I hope for a quick response,
  Thank you

  Hello

  Remember to make changes to the computer before this problem?

  There are no other methods to set the display settings.  However, you can try to solve the problem.

  
  Follow these methods.
  Method 1:

  Important: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  How to back up and restore the registry in Windows: http://support.microsoft.com/kb/322756

  Perform these steps.

  a. copy then paste the content below into Notepad.

  b. above, click on "file save as" change the "save as type" to "All files" and name it anything with a .reg extension.

  c. Double click on it and choose "merge" see if that brings the display options of the properties.

   

  [HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Policies\Explorer]

  "NoActiveDesktopChanges" = hex: 00, 00, 00, 00

  "NoActiveDesktop" = DWORD: 00000000

  "NoSaveSettings" = DWORD: 00000000

  "ClassicShell" = DWORD: 00000000

  "NoThemesTab" = DWORD: 00000000

   

  [HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Policies\System]

  "NoDispAppearancePage" = DWORD: 00000000

  "NoColorChoice" = DWORD: 00000000

  "NoSizeChoice" = DWORD: 00000000

  "NoDispBackgroundPage" = DWORD: 00000000

  "NoDispScrSavPage" = DWORD: 00000000

  "NoDispCPL" = DWORD: 00000000

  "NoVisualStyleChoice" = DWORD: 00000000

  "NoDispSettingsPage" = DWORD: 00000000

  "NoDispScrSavPage" = DWORD: 00000000

  "NoVisualStyleChoice" = DWORD: 00000000

  "NoSizeChoice" = DWORD: 00000000

  'UnadviseClient ' = -.

   

  [HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Policies\ActiveDesktop]

  "NoChangingWallPaper" = DWORD: 00000000

   

  [HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\ThemeManager]

  'ThemeActive' = '1 '.

   

  "DllName" = hex (2): 25, 00, 53, 00, 79, 00, 73, 00, 74, 00, 65, 00, 6 d, 00, 52, 00, 6f, 00, 6f, 00,------.

  74,00,25,00 5 c 00, 72, 00, 65, 00, 73, 00, 6f, 00, 75, 00, 72, 00, 63, 00, 65, 00, 73, 00, 5 c,

  00,54,00,68,00,65,00, 6 D, 00, 65, 00, 73, 00, 5 C, 00, 6 C, 6F 75, 00, 00, 00, 61, 00, 5 C, 00,------.

  6 c, 00, 75, 00, 6F, 61, 00, 00, 2nd, 00, 6 d, 00, 73, 00, 73, 00, 74, 00, 79, 00, 6 c 00 65, 00, 73,------.

  00,00,00

  Method 2:   In addition, run the SFC (System File Checker) scan and check if there is any system of file corruptions. (You need the XP disc to run this method).
  a. to do this, click Start, click programs, on Accessoriesprincipally made, right click guestand then click run as administrator. If you are prompted for an administrator password or a confirmation, type the password, or click allow.
  b. type the following command and press ENTER:
  sfc/scannow
  
  The sfc/scannow command analyzes all protected system files and replaces incorrect versions with appropriate Microsoft versions.
   
  More information on SFC scan found in this document:
  Description of Windows XP and Windows Server 2003 System File Checker (Sfc.exe)
  http://support.Microsoft.com/kb/310747

  Method 3: If the methods above do not help, you maytry to perform a system restore.
  The System Restore tool uses points of restore to return the system files and settings to an earlier point in time. You can use it to restore the operating system to a point in time where you have not experienced the problem.

  For users of XP system restore.
  How to restore Windows XP to a previous state
  http://support.Microsoft.com/kb/306084

• When we try to write in a pdf file. document, it changes the Danish letters Æ Ø Å to different signs. To do this, this om pc and Mac. Anyone know of a solution? Thank you

  When we try to write in a pdf file. document, it changes the Danish letters Æ Ø Å to different signs. To do this, this om pc and Mac. Anyone know of a solution? Thank you

  Hi, I found the problem, it seems that the pdf file uses a helvetica font, and when we write in a part of the PDF with the Danish letters A, Æ, O, it changes signs. I changed the Roman fonts in adobe acrobat pro, and then there's no problem. But he seem´s that the standard in pdf files is helvetica, and there is not time to change the files, because we get only the files on the day of the exams at school. It happens in all versions of adobe 11 and DC, it is also a problem on Windows 7, 8.1 and windows 10 more Macbook.

  Kind regards

  Med Hotel hilsen

  Price Patrick Simon

  TI-Vejleder

  Langeskov Skole

  Ronningevej 38

  Langeskov 5550

  Denmark

  FRA: meenakshin83966505 [email protected]<>[email protected]>

  SVAR til: "[email protected]<>[email protected]> ' [email protected]<>[email protected]>" "

  Dato: måndag den 18. January 2016 kl. 14.39

  Til: Simon Price [email protected]<>[email protected]>

  Emne: You have been mentioned by meenakshin83966505 in Re: when we try to write in a pdf file. document, it changes the Danish letters Æ Ø Å to different signs. To do this, this om pc and Mac. Anyone know of a solution? Thanks to the Adobe community

  You talked

  by meenakshin83966505https://forums.adobe.com/people/meenakshin83966505?et=notification.mention> in Re: when we try to write in a pdf file. document, it changes the Danish letters Æ Ø Å to different signs. To do this, this om pc and Mac. Anyone know of a solution? Thanks to Adobe Community - see the reference from meenakshin83966505 to youhttps://forums.adobe.com/message/8402116?et=notification.mention#8402116>

• How to change the domain name on the host target

  Hello!

  I need to spend a couple of machines in a new area.

  Is it possible to change the field to a GC host or what I need to remove and add?

  / R

  Unfortunately, there is no good way to change the host name.   You can change the display name with EMCLI change the target, but below would be inaccurate, because it would still be the old domain.   Can you create a DNS alias so that it can still be used with the old domain?   Otherwise, delete and rediscover is the only way that I can see.

  You can use this to remove and readd without reinstallation:

  http://docs.Oracle.com/CD/E24628_01/install.121/e24089/appdx_repoint_agent.htm#BABICJCE

  followed by

  emctl start agent

  emctl security officer

  emctl config agent addinternaltargets

• How can I change the domain to a server of comment?

  Acrobat 9 on Windows 7

  In addition to editing the registry, how can I change the URL of a comment server which I use for exams?

  Earlier, I initiated a shared review but used only the host name of the server, not the fully qualified name (FQN) which includes the full domain name. Now, when I reuse this server for other comments that I initiate, I'm stuck with the unqualified name. People outside of my subnet cannot post comments on the server because the simple host name is not known on their subnet.

  How can I change the properties of this server so clients use the FQN?

  Jerry

  Yes, you can change the server name in the registry. After change, all the comments that you initiate with this profile will point to the new server location.

• How can I change the domain of my page on BusinessCatalyst?

  I mean how can I do the. businesscatalyst.com disappear and just the ".com" on my domain name

  Hello

  When you are ready to "go live" with your site, you will need to add your domain to your BC site.

  Please follow the steps below...

  http://helpx.Adobe.com/business-catalyst/using/change-site-domain.html

  Kind regards

  -Sidney

• change the voltage with a different deadline for both channels

  I have DC power which is having two output channels, each channel is capable of giving two different tension at a time. I want to change the voltage for channels with two differnet time. ex: voltage channel 1 will change each time 2mins and canal2 tension will change to each period of 5 minutes of time. so please give me the suggestion for this problem thanks in advance.

  Maybe like this...

• Connect to VPN and then log on to the domain by using different credentials.

  I have a laptop user who will take care of various remote sites.

  In XP, you had to first use DUN/VPN and then you can log in the field with different credentials that the VPN end point.

  With Vista if I use the method user to switch on the logon screen and the log in the VPN it also attempts to use these credentials for the domain.  The VPN device has its own separate authentication of the AD.  How to restore the loss of functionality that Vista has?

  I have to first connect to the VPN appliance and authenticate to that I do the network connection.  Then, I need vista to propose real logon to the computer or to the domain.

  I appreciate the help.

  Computers in discontinuous bench

  Hi StapleBench,

  The question you have posted is related to the VPN and domain environment is better suited in the TECHNET forums, and as I see that you already post your query in the TECHNET forum in the following link:

  http://social.technet.Microsoft.com/forums/en-us/itprovistanetworking/thread/f8579344-07f1-4855-8599-e55a0430c5f8

  I suggest you wait for a response on the TECHNET itself thread.

  Halima S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• How to change the same on 2 different phones to MAC iMovie project

  I am in Germany and my husband is in Spain and we have 2 separate not coupled Mac Book Air laptop.

  (1) I need iMovie project "edit" an unfinished which is currently on his laptop.

  (2) how can we share and both have access to the clips unfinished , events, projects iMovie, etc. between 2 laptops?

  We only know how to share projects FINISHED, but this isn't what I want to do.

  Could possibly copy us the unfinished project files on DropBox or something like that?

  Thank you

  This is possible, but not easy.  You need to work from a copy of the same library using exactly the same version of iMovie.  You cannot work directly for a copy of the library 'in the cloud', but you can use the cloud to transfer the updates to the library.  Libraries are often quite large, so download will be slow.  If the library contains many other events and projects you don't want to work on it would be better to create a library containing only the events and you need to collaborate on projects.

  Of course only one of you can be change at any time and you would have to notify each other when you have downloaded an update from the library and completed.  Its also important to avoid the update of the library while iMovie is running.

  Another important point is to ensure that the library contains all of the original media files and not of links to files in other libraries like iTunes or pictures that do not work on the other computer.  To do this, you need to "consolidate media" for more information see: http://help.apple.com/imovie/mac/10.1/#/mov882dee351

  Geoff.

• Change the 'domain' by default in Client mode

  Hey all,.

  I know there is a GPO, you can configure for this, but I'm looking for a solution on server side, if there, maybe in the database of ADAM?

  Basically I have a network with a root domain and several child domains.  'Domain' in View Client by default for the domain root, usres must choose the field each time.

  I can't fix anything client side, for reasons too complicated to explain here.  However, I can solve server-side configurations if I need (like in the Console view, or database of ADAM).

  
  If anyone knows if it is possible to do it on the side server, please let me know.

  
  Thank you
  Drew

  You can filter the areas on a per database connection server.   See this KB for the order to do so, http://kb.vmware.com/kb/1014103.

• I cannot join the domain in my office with my home edition, Windows

  Anyone, please help me solve the problem please...

  I use Microsoft Windows Home Edition...

  I can't join the domain...

  If I open network connections, and then I click on advance and I choose network identification and then I click on edit, there is only the option of working group...

  But if I opened that there is two option in windows proffesional came... First area and the second is the working group...

  How do for pop up that way I can join domain in my office?

  I thank the of for anyone who can help me...

  Anyone, please help me solve the problem please...

  I use Microsoft Windows Home Edition...

  I can't join the domain...

  If I open network connections, and then I click on advance and I choose network identification and then I click on edit, there is only the option of working group...

  But if I opened that there is two option in windows proffesional came... First area and the second is the working group...

  How do for pop up that way I can join domain in my office?

  I thank the of for anyone who can help me...

  XP Home Edition is not supported to join a domain. XP Professional is.

• How to change the default font and send only plain text in windows live mail

  When I go to mail options and change the default settings, it doesn't change the actual consists of the parameters, I must change each email I write individually.  I have the settings and 'apply' and 'ok '.  Help

  I suggest that you click the button Modify on your original post and pass it on the Windows Live Mail forum. You are likely to get the best help there.

  Windows Live Mail help is in this forum
  http://answers.Microsoft.com/en-us/windowslive/Forum/LIVEmail?tab=all

• How do you change the orientation (direction) of an optical mouse wireless on Windows 7?

  Don't ask me why, but I was an operator Dyslexic mouse for many years.  I managed to change the direction of my mouse over the years of Control Panel, but now there is no option to do so.  I need the mouse to move upside down, in the opposite direction.  How do I customize my mouse setting?  A big thank you to any genius!

  Hi Sytengan,

  Please help me with the following information related to this issue:

  1. What is the brand and model of your wireless optical mouse?
  2. You see any option as mouse in the window Panel?
  3. Have you made changes on the computer before this problem?

  I suggest you to visit the manufacturer of the mouse and try to install the drivers and check out them.

  See also: change the settings of the mouse

  http://Windows.Microsoft.com/en-CA/Windows/change-mouse-settings#1TC=Windows-7

  Please answer us on the status, as well as the information necessary to help you more.

• Cannot change the sections of recorded TV, TV was recorded by Windows Media Center on Windows 7

  I have problems with sections of editing a stored program recorded TV in Windows Media Center on Windows 7.

  I can't find all the options to change the records as it is on my PVR on Media Center. I can't even open the record with another program like Nero to edit & find Windows Live Movie Maker is very limited, it allows to cut the ends of the records not the sections in the middle.

  Can someone tell me what program or how do I do it (& where to find)?

  Media Center has not all means of editing recorded TV. I don't know if you
  will have more luck if you convert DVR - MS and then try Nero. To convert,
  view the TV folder in Windows Explorer and click with the right button on the show.
  then convert DVR - MS to view on the shortcut menu.  Video reDo might work
  as well. Try posting on thegreenbutton.com forums if this does not resolve your
  issue. See the son as http://thegreenbutton.com/forums/p/85953/432209.aspx
   
   
   
  Sunday, July 4, 2010, 05:29:20 + 0000, Lunny says:
   
  >
  >
  > I have problems with sections of editing a stored program recorded TV in Windows Media Center on Windows 7.
  >
  > I can't find any options to modify the records as it is on my PVR on Media Center. I can't even open the record with another program like Nero to edit & find Windows Live Movie Maker is very limited, it allows to cut the ends of the records not the sections in the middle.
  >
  > Can someone tell me what program or how do I do it (& where to find)?
   

  Barb Bowman

  http://www.digitalmediaphile.com

• Logged in as admin. Cannot change the domain users group to the domain administrator

  My domain administrator is defined as a domain user and I want to change it to domain administrator. The groups gathered outside the account > users > Admin > groups section.

  Hello Tripline,

  Please provide number and firmware version of your ReadyNAS model.

  What's your ReadyNAS built-in AD? The ReadyNAS will simply copy the accounts of the ADS in your ad. Existing domain user, 'Administrator' should be adjusted to have administrator rights. I guess you should change everything first, and then integrate the NAS again to the AD.

  Kind regards