Logged in as admin. Cannot change the domain users group to the domain administrator

Similar Questions

• cannot change the xp administrator password...

  someone had blocked my access to the internet... I tried to change the admin by regedit, ctrl + alt + delete, start mode without failure, mmc, cmd, but which is not supposed...

  It always seems system error... I don't know what else to do... Please help me... Thank you...

  Hey Shanks red hair.

  In addition to what John said, it looks like there may be a minimum age for the password, in translation, that means that you can not change the password until a certain period of time elapsed. To check or change this:
  Log in as an administrator and start the command prompt:
  Start-> Run-> "cmd".
  Type this in the command prompt:
  NET user myusername (enter your specific username in place of "myusername")

  The results should contain a line that says:
  "Editable password
  If this date is in the future, then you have a minimum age of set password.

  While you're at the command prompt, enter the command:
  net accounts

  and search for "password Minimum age (days).  If it is not zero, then you can set it to zero by entering the command:
  NET accounts /MINPWAGE:0

  I hope that was helpful. Thank you for using Microsoft Answers!

• My set-up agency & ABC developed for us. We no longer use the Agency. I have 2 log-in - but 1) cannot change my billing settings & 2) cannot update models due to lack of access. Need help to change this.

  My set-up agency & ABC developed for us. We no longer use the Agency. I have 2 log-ins - but 1) cannot change my billing settings & 2) cannot update models due to lack of access. Need help to change this.

  Hi Rebecca,.

  You should get in touch with our accounts team to work a solution to your problem. Drop them a note at: contact us | Adobe Business Catalyst

  Cristinel

• Good for laptop - cannot change the ISP; keep returning to a previous provider

  Windows 7 laptop of my grandson, I'm migrating FIREFOX (excellent resource!) of my aging XP desktop. An existing Mozilla installation on the guarded device tries to connect to an ISP in Sydney (1000km) which kept out, I guess because the signal is too weak. Too far - on the Internet?

  Reinstalled my new ISP contact, reinstalled a fresh copy of Firefox, copied the old profile XP (just underneath the random string file name), but cannot change the fault. Firefox at startup tries to raise the old ISP (Sydney) and expires, and then allowing me to establish a manual connect with the ISP (my current) new.
  Perhaps a clue: in my Firefox troubleshooting info, change preferences, the browser start page is the address of 'old', with 'override mstone' ignore, what look like prints of registry entries, but I can't change all that - and maybe it's wise! An annoying secondary question: on arrival, the laptop listed no administrator user. So I am me came as an administrator, but I wonder if a past or current even Admin hidden could register (or other) entered resistant to change.

  Late discovery: the laptop is apparently infected with browser pirate btsearch.name. Search Google throws a series of removal procedures, and I'm now working through them.
  What Miss me?

  Sometimes a problem with Firefox can be a result of malware installed on your computer, you may not be aware of.

  You can try these free programs to search for malicious software that work with your existing anti-virus software:

  • Microsoft safety scanner
  • MalwareBytes' Anti-Malware
  • Anti-Rootkit utility - TDSSKiller
  • AdwCleaner (for more information, see this other AdwCleaner download page)
  • Hitman Pro
  • ESET Online Scanner

  Microsoft Security Essentials is a good permanent antivirus for Windows 7/Vista/XP, if you do not already have one.

  More information can be found in the article troubleshooting Firefox problems caused by malware .

  This solve your problems? Please report to us!

• I signed on XP Pro SP3 as an administrator but you cannot change the timing of Windows Update to 03:00. All options are not enabled. How can I change the time, updates are made? __

  I signed on XP Pro SP3 as an administrator but you cannot change the timing of Windows Update to 03:00.  All options are not enabled.  How can I change the time that updates are made?

  Hi imoffshore,

   

  Welcome to Microsoft Answers Forums.

  We would like to get some more information from you to help solve your problem. You better, please answer the following questions.

  ·         When was the last time it worked?

  ·         Remember to make changes to the computer recently?

  ·         You have security software installed on the computer?

  ·         You get the error message?

  When you open the tab automatic updates in the control panel or My Computer property sheet, all options of configuration of the automatic updates may be grayed out. This happens due to one of the following reasons:

  1. You are not logged as administrator (or equivalent)
  2. Strategy of automatic updates is enabled
  3. Automatic updates (and Windows Update) access is blocked by group policy

  The options available for automatic updates.

  You must make some changes in the windows registry.

  Important: this section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  How to back up and restore the registry in Windows

  http://support.Microsoft.com/kb/322756

  • Click Start, run and type REGEDIT to . EXE
  • Go to this location:

  HKEY_LOCAL_MACHINE-SOFTWARE-policies-Microsoft-Windows------WindowsUpdate------AU

  • In the right pane, delete the two values AUOptions and NoAutoUpdate
  • Go to this location:

  HKEY_CURRENT_USER-SOFTWARE-Microsoft-Windows-CurrentVersion------policies------WindowsUpdate

  • In the right pane, delete the DisableWindowsUpdateAccess value

  Using the Group Policy Editor - for Windows XP Professional

  • Click Start, run and type gpedit.msc
  • Navigate to the following location:

  => Configuration of the computer
  ==> Administrative templates
  ===> Windows components
  ===> Windows Update

  • In the right pane, double-click Configure automatic updates and set it to not configured
  • Next, go to this location:

  => User configuration
  ==> Administrative templates
  ===> Windows components
  ===> Windows Update

  • In the right pane, set to remove access to all Windows Update features on not configured

  Change how Windows installs or notifies you of updates

  http://Windows.Microsoft.com/en-us/Windows-Vista/change-how-Windows-installs-or-notifies-you-about-updates

  Halima S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• "Cannot change the priority. The operation could not be performed. Access denied. "

  When you attempt to change the priority of a process in the Task Manager (no matter what process, I've tried a few) I get the error message: cannot change the priority. The operation could not be performed. Access denied. It is while being logged on as an administrator. Would appreciate a solution.

  Since Windows Vista and Windows 7, a logon administrator account always uses a standard or limited account for certain purposes. To access these properties, you can run a program using the "Run as administrator". To run as an administrator, you right-click on a program and select "Run as Administrator" in the right click menu.

  Some processes of the system, such as services, you cannot change even as an administrator.  Come on in "show processes from the user all the" which will ask for permission. Then reopen the task Administrator Manager and then see if you can change the priority.

• Cannot change the folder name of the user, i.e. the C:\Users\user name (folder name)

  I got a new computer w/Windows 7, but Set - up guy was working on 2 computers and put the wrong name in this machine slot 'username '.  All seeking answers to correct (my machine automatically books with my ADMIN correct name but doesn't let me change an incorrect name in the USER file), I came across this on VISTA.  It also applies to Windows 7?

  "What you see is the reference in the"C:\Users\user name"folder. While you can change the registered owner and the name of the user account, you cannot change the name of the folder 'C:\Users\user name'. The only way to do this is to create a new admin account and delete the one in a new. »

  If the solution IS identical to that of Vista, the instructions on the following link apply?
  http://www.Vistax64.com/tutorials/93026-user-account-delete.html

  Yes, the solution is identical to that of Vista, and apply the instructions at this link.

  Create a new account with the correct name and delete the old account.  If you wish, save the old account during erasing files and copy them into the new account.

• Cannot change the power state of VM: internal error

  Hello

  I freshly installed OS elementary which is based on Ubuntu.

  VMWare Workstation installation worked fine, but after creating my new virtual machine with a Win 10, the same message comes to me:

  Cannot change the power state of VM: internal error

  I looked a little in the log file, found this dump was set to zero, they changed in etc/security /, but that's all I've managed to find.

  Here is my log file

  Thanks a lot for your help

  PS: I'm leaving a beginner in the Linux world, so explanation would be welcome

  Hello

  Welcome to the VMware community forums.

  I don't think that the problem is related to a beginner linux user, it's a problem triggered by a specific hardware configuration.

  If you look at your log file again, there is an error just before the vmware process attempts to core dump. The dump is a reaction to the problem.

  vmx| E105: PANIC: VERIFY bora/vmcore/vmx/main/timeTracker_user.c:238 bugNr=148722
  

  If you then put the bug number into google, you get:

  http://KB.VMware.com/kb/1227

  Which indicates in return you can set a configuration file to specify the actual frequency of your processor.

  Your processor is an Intel (r) Core i5-3570 CPU @ 3.40 GHz

  The linux variant of the config.ini file they speak on windows hosts is/etc/vmware/config

  --

  Wil

• Cannot change the password using the question of security in l/min.

  We have an identity server. We have a lost password management application. There is a webpass and a webgate configured for the application of the LPM. The mode of communication is simple. The forgotten password feature does not work for the application of the LPM.
  
  Steps to re-create the issue
  --------------------------------------
  -In the form of connection, the user clicks on "I forgot my password"link
  -User enter 'User ID' and then click on submit
  -It redirects the user to a page of challenge question, the answer to the question the user and click on submit
  -The next page confirms the user had correctly answered the secret question. And invite the user to enter the new password, retype the password, and then click Save
  -When, click Save shows "cannot change the password. The screen is refreshed. The new password is not saved.
  
  Identity & Webpass - 10.1.4.2 BP08 Server version
  
  Thank you.

  Hello

  For the LPM error "cannot change the password" check if you set a "minimum age" in the definition of the strategy of password.
  "If you set a minimum age of 2 days for example, the user will not be able to change his or her password before 2 days after the initial setting of the password and you will have 'identity/oblilx/logs/oblog.log' shows: ERROR 0 x 00000901 lost_pwd_mgmt.cpp:264 'cannot change password' loginName ^ xxxxx" in oblog.log

  --> In our POC password minimum age has been set, and we have forgotten that we have in him... This is why we hade this error on the LPM scenario...
  --> After setting the minimum age to 0, the scenario LPM works every time

  Best regards

• Cannot change the incoming mail server. no text highlight

  I am unable to send mail from my Mac.  No problem with iphone or iPad. Cannot change incoming mail server as text is not highlighted.  Cannot change the server for outgoing (SMTP) mail. Cannot change the list of SMTP servers. Says offline.

  Hi Granny Smith 1.

  Thank you for using communities Support from Apple. Sorry to hear that you are having problems with mail. It's a little bit clear exactly what you see when you say that you cannot change any server info, but if you continue to have problems sending or receiving mail, you will find the troubleshooting steps in the following article useful:
  

  If you cannot send or receive e-mail on your Mac - Apple Support

  Kind regards.

• Cannot change the Apple ID

  I'm changing my Apple ID, but when I try to change ID, it does not show the ability to 'change e-mail address '.  How can I get that option?

  You cannot change the name of the device.

  Sign of your ID, then click on my Apple ID and change the ID (you can not change if it's an address to iCloud)

• change my phone number and cannot change the keychain

  Dear,

  gently, I changed my phone number and cannot change the keychain

  You try to make the change in the preferences/iCloud/Keychain/Options of the system? What happens when you try?

  City link below.

  • The device that uses the SMS compatible phone number you provided when you set up first iCloud keychain. A verification code is sent by SMS to the phone number. If you can not access this number, Contact the Support of Apple, which can verify your identity so that you can run the installer on your new device.

  Frequently asked questions about iCloud Keychain - Apple Support

• Cannot change the Google search bar

  In Safari, I go to Google.com and do a google search. So far so good.

  Now, on the search results page, I try to edit the search in the Google search bar and nothing happens - the Google search bar is totally insensitive. To do another search, I use the address bar in Safari or reload google.com.

  I have deleted history, deleted all the data of the Web site, disconnected plugins and extensions, deleted the cache via the menu Developer. I used 3 CleanMyMac to clear and reset everything.  I can't solve the problem.

  Safari 9.0.2 (11601.3.9)

  OS X El Capitan 10.11.2

  Mac Mini (late 2014)

  A

  Please see below:

  Cannot change the Google search criteria in Safari

  B

  'CleanMyMac' is a scam and a frequent cause of instability and poor performance. Depending on which version you have, the developer's instructions may not completely uninstall. Please follow these instructions, then do as below.

  Please, back up all data before proceeding.

  Triple-click anywhere in the line below on this page to select this option:

  /Library/LaunchDaemons/com.macpaw.CleanMyMac2.Agent.plist

  Right-click or Ctrl-click on the highlighted line and select

  Services ▹ reveal in Finder (or just to reveal)

  the contextual menu.*, a file can open with a selected item. If so, move the selected item to the trash. You may be prompted for administrator login password.

  Repeat with this line:

  /Library/PrivilegedHelperTools/com.macpaw.CleanMyMac2.Agent

  Restart the computer and empty the trash.

  You may also delete one or more of these elements in the same way:

  ~/Library/LaunchAgents/com.macpaw.CleanMyMac.helperTool.plist

  ~/Library/LaunchAgents/com.macpaw.CleanMyMac.volumeWatcher.plist

  ~/Library/LaunchAgents/com.macpaw.CleanMyMac3.Scheduler.plist

  Never install "CleanMyMac" or something like that.

  * If you do not see the item context menu copy the selected text in the Clipboard by pressing Control-C key combination. In the Finder, select

  Go ▹ go to the folder...

  from the menu bar and paste it into the box that opens by pressing command + V. You won't see what you pasted a newline being included. Press return.

• USB 6009 CANNOT CHANGE THE CONFIGURATION OF TERMINAL TO CSR... Can't SEE not the OPTION configure when right-click on the device...

  USB 6009 CANNOT CHANGE THE CONFIGURATION OF TERMINAL TO CSR... Can't SEE not the OPTION configure when right-click on the device...

  Once again... Thanks for the tips...

• You cannot change the format of the cursor

  Original title: mouse cursor

  Cannot change the format of the cursor; message says no file found - for example, C:\WINDOWS\Cursors\arrow\_rl.cur

  _rl.cur is not a slider that comes with XP. Nor is the folder named arrow. You must have installed a 3rd slider party system and I guess you are trying to change that.
  Try to reinstall it.

• Error: Windows cannot change the password when attempt to set a password to connect to the Windows XP computer.

  Original title: Windows cannot change the password.

  I'm trying to set a password on my computer with windows xp professional and everytime I try, I get a message saying: Windows cannot change the password. Please can someone help me.

  With our thanks

  Elizabeth

  Hi Elizabeth,.

  You can follow this link & check if the problem persists:

  Impossible to change the password for the administrator account in user accounts in Control Panel

  Hope the helps of information.