Changed the original after imaging HARD disk but can get Windows 7 valid

Similar Questions

• cannot complete the recovery after a hard disk replacement

  HP Pavilion m9340f Vista Home premium.

  original hard drive & replacement two seagate barracuda SATA

  After the disk crash, replaced the hard drive.

  Using Vista Home Premium SP1 recovery disks (disk w / extra) HP, has begun to recovery.

  First step was to run the tools, test drive.  Seek and scan spent.

  Put 1 in the drive and powered drive, then on it.

  Bridged system restore and went to recovery.

  All the drives used, including the additional disk.  Everything is OK

  reformat & reinstalling original content OK

  "Complete recovery" & restart OK

  Opens the window with 'startnet.command', 'building the partition' appears

  With "HP Flexbuild 2.0"appears, and then restart

  "Windows Setup" starts.

  copy of files OK

  extension of the files OK

  installation of OK features

  installation of updates OK

  end of installation - it is here that the window with the msg

  "windows setup cannot configure windows to run on a hardware on this computer.

  Is there a way to know what caused Setup to stop?

  I have no idea where to go from here.  Seagate, told me to "call HP.  Support HP told me to buy another machine, although I had to pay for the support.  This forum is my last hope.

  Can someone PLEASE suggest something.  I can't just throw this machine.

  RESOLUTION.  I had an old Western Digital 1 TB drive that wasn't Advanced Format.  Worked like a charm.  The machine retrieved and updated now.

• On my destop icons have suddenly had highlighted description. I can change the color of this strong light but can't get rid of it?

  I'm completely oblivious to what I did to put a box colored around the description icon but now I can't get rid of it...?

  Hello

  1. don't you make changes to the computer until the problem occurred?

  If the problem is with the shade of blue on the icons on the desktop, try the steps below to solve the problem.

  (a) right click on my computer.

  (b) select Properties.

  (c) select the Advanced tab.

  (d) now, click settings under performance.

  "' e) scroll down and check the option" shadows fall to use the desktop icon labels.

  (f) click OK

  Hope this information is useful.

• I've had dramas with my photos because I got my new iphone 4s in saying that there is a problem with the properties and I can't change the format of images

  Hello

  I've had dramas with my photos because I got my new iphone 4s in saying that there is a problem with the properties and I can't change the format of images (ie the rotating EGTC)

  Now, I see the image preview and it disappears to the flower, so I did not see one of my photos

  Some would like TO help on this im so not good with this kind of thing.

  Appreciate it in advance

  Let

  Hello

  • When you change the format of images of?
  • What is Windows Explorer or Itunes?

  Try the TV activation

  Enabled and disable the Option 'show window previews (thumbnails) '.

  a. right click on the taskbar.

  b. Select Properties.

  c. check show window previews (thumbnails) "Option. .

• Try to reinstall my original Adobe CS after a hard disk crash need help, download again doesn't accept serial number CS?

  Hi, I'm late to the game here, I am trying to reinstall my original Adobe CS after a hard disk crash.  I know that the activation server has been stopped, so I went and downloaded the CS2 version that doesn't require activation.  The problem is my serial number CS is displayed as invalid on the CS2 download, can someone help?  I saw not just a download CS anywhere and their cat had is shown to be completely useless as agent just brutally told me time and again «we don't support that more»

  CS2, Acrobat 7 + Audition 3 (AND PREVIOUS) activation server has disappeared, then read below

  l http://helpx.adobe.com/x-productkb/Policy-Pricing/Creative-Suite-2-activation-end-Life.htm

  .

  You MUST use the special version and the serial number on the page, not your original drive or serial number

  .

  NOTE that CS2 will not install on a "modern" with an Intel Mac

  When you install the special version of CS2 on a Win7 or Win8 or Win10 computer, you may need to right click on the program icon and select compatibility Windows XP in the popup of option

• You are looking for a way to set permissions of files on a folder so that users can view and copy the files out, but may not change the original file in the folder.

  You are looking for a way to set permissions of files on a folder so that users can view and copy the files out, but may not change the original file in the folder.  They will have to copy the files in the folder to make changes and then copy a review of back in.  Locally and on the network

  Hello

  1. In Windows Explorer, right-click the file or folder you want to work with.

  2. In the context menu, select properties and then in the Properties dialog box, click the Security tab.

  3. In the name list box, select the user, contact, computer, or group to which you want to display permissions. If the permissions are grayed out, this means that the permissions are inherited from a parent object.

  https://msdn.Microsoft.com/en-us/library/bb727008.aspx?f=255&MSPPError=-2147217396

• I had to rebuild my computer after a hard disk failure. How can I reinstall the CC that I already paid for?

  I had to rebuild my computer after a hard disk failure. How can I reinstall the CC that I already paid for on my new drive?

  Install the application of cc on your new hard drive desktop, https://creative.adobe.com/products/creative-cloud and use it to install your programs of cc.

  [moved from the download, installation, commissioning creative cloud download &install]

• HP Officejet Pro 8600 Plus: Streak black left on the original after copying Document

  Product: HP Officejet Pro 8600 more N911g, only one month, bought at HP online

  Problem: Each document that I put into the automatic document feeder coming out with a black streak in the center of the paper. The copy is a perfect quality, while the original is left with the brand. I don't see a roll of Center when you open the service on the ADF Panel, but I'm probably wrong. What should I do?

  If the line appears on the original after running through the ADF? The line does not appear on the copy image?

  * If this is the case, then I advise you contact HP Technical Support on this product because it is very new, as mentioned above. HP can replace the printer without cost to you. I'll link the information to get in touch with them below. The link takes you to a form to fill out. Once you fill it and she is treated, it will give you the printers warranty information, a file number and the phone number to call.

  HP Technical Support call case form:
  http://goo.GL/w7Hgh

• How to share the root of a hard disk in Win7?

  I am able to share a folder, but cannot share the root of a hard disk. Homegroup is off.  In addition, even if I have the password to 'OFF' I always get invited to do since the XP computers on the network, but not Vista computers. Weird?

  Win7 computers have full access to the C:\ root on Vista and XP in network of machines. But on computers Win7 the C:\ root is blocked. How to open readers for full access. I worked with permissions in fsmgmt.msc without a bit of luck. What is going on. It is not that difficult.

  I have several hardrives with hundreds of directories and must share each individually. There must be a way around this?

  Why everyone does not assume that the implications of the root of a drive of sharing are unknown. I get it. I Armi it. But, Yes... I want to share the root of my records. It's like a big giant microsoft diaclaimer whenever I hear it.

  So I thought to it. Finally!

  OK, that's the problem with Windows 7: I had possession of the disk on the local computer (by default), but this is not enough. I had to give "everyone" the drive to another computer to access property. That means logging in inspired by the network from another machine to Win7 computer, you property as "everyone" and therefore, the authorization to access the drive.

  So, here is what I did. Right-click on the hard drive from windows Explorer. Go to properties. Click Security. Click on change. "Everyone" add to the Group and the permissions you want. Then, go to sharing and share the drive as you normally would. The root of the drive will be accessible on the network.

  I understand it now, but it is poorly explained in documents I've read. I spent hours of research on this and cannot understand why MS makes it so hard to share a drive on a network. Totally absurd.

  I hope this helps others trying to do the same thing. In a small home network, it is very common need to share multiple disks in the root of c:\.

• How can I get old libraries when I have to reinstall my lightroom after a hard disk crash

  I need to reinstall lightroom 4 on a new hard drive after a hard disk crash. Is there anyway to recover the old libraries that I created from my old hard drive and transfer it to the new hard drive?

  You have the catalog and images of the old hard drive?

• Try to reinstall lightroom after a hard disk crash - new hard drive

  How can I re - download lightroom after a hard disk crash. I have the serial number of the purchase but can't seem to reinstall. Help please. Thank you.

  Moving to this discussion in the download, installation, commissioning of forum.

  Holliday162 you can download a new copy of Photoshop Lightroom from your account.  Please see find a download link on Adobe.com for more details on how to download your purchased software.

• If I want to keep the quality of the original captured images (from tape), which is the format that I should?

  I captured canon hv20 in FireWire to my computer with adobe first elements 11. After the capture, I cut clip three times. Then I want to export my computer due to watching on my 46 inch lcd TV full hd. If I want to keep the quality of the original captured images (from tape), which is the format that I should? I chose mpeg 1440x1080i 24, TI alerts for error. Or I premise avchd 1920 x 1080 p, then it is also more scenes captured. I think it's 20000 MB, scened (without cutting) but captured only 11.2 GB. Please help me. Thank you very much.

  I would firstly like to thank you for answering my question. My camcorder is canon hv20 PAL. When I look at the setting of the project, it's HDV 1080i 25 frames per second anamorphic. Duration of the timeline is 56 minutes. I'm sorry about misinformation in an adobe forum. Yes you are right this is not MPEG 1440x1080i 24. I chose MPEG and choose MPEG2 1440x1080i 25 and it convert .m2v file. I couldn't see because Windows media player does not open the m2v files, but I didn't do anything about in order to open the file. I want to learn: my initial project captured is 11.2 GB. But shows on screen m2v files is about 21000 MB. This means that 20 GB! It is same quality my project captured MPEG) and Cup project m2v? What is another way to export? I'm sorry that even once it does not error message about the m2v files. I think I got confused, I think when I chose MPEG, 25 HDTV high quality, I saw the error message but I don't know what is the error message.

• Slide show - how to change the sequence of images

  How to change the sequence of images in the slide show.

  I'm trying to highlight in the film strip, and I can drag.  But, when I try to place it somewhere else, it comes in the original location.

  What I am doing wrong?

  Yu can not change the order of the images in the slideshow module.

  To change the order, go to the library module (must be seen grid), enter the part of the image of the thumbnail and drag if it is a new position in the sequence. Switch to the slide show module when all the pictures are in the order of preference, and then create a Collection of slide show. The order and the setting is stored in the collection.

• After installing something from windows update my computer start Startup Repair each time and said "a hard disk problem is preventing Windows from start" and turn off.

  Hello

  After installing something from windows update (about 300 MB in size) my computer start Startup Repair each time and said "a hard disk problem is preventing Windows from start" and turns off.
  Then a window pops up saying "Startup Repair cannot repair this computer automatically.
  The details of the problem say;
  Problem event name: StartupRepairV2
  Signature of the problem 01: AutoFailover
  Signature of the problem 02: 6.0.6001.18000.6.0.6001.18000
  Signature of the 04:65537 problem
  Signature of the problem 05: unknown
  Signature of the 06 problem: BadDisk
  Signature of the 09 problem: unknown
  Signature of the 10:1168 problem

  System Restore does nothing, and all the other tools of recovery. :(

  Please help, it will be much apreciated :)
  DOM

  If you are sure that the problems began immediately after installing a Windows Update, use the free support of MS here:
  Visit the Microsoft Solution Center and antivirus security for resources and tools to keep your PC safe and healthy. If you have problems with the installation of the update itself, visit the Microsoft Update Support for resources and tools to keep your PC updated with the latest updates.  MS - MVP - Elephant Boy computers - don't panic!

• This who should I insert for "installation media" interviewed "load the drivers for your hard disks?

  I am trying to repair my installation of Vista Ultimate 64 bit (my system does not boot into Vista at the moment - something wrong).  I am running the recovery by booting from the Vista installation disc in my CD/DVD drive.  When the System Recovery Options screen appears, there is no operating system is displayed.  I wonder to 'load the drivers for your hard disks' by inserting the installation media.  The wizard goes into a mode of navigation, but I have no idea of what he seeks.  The only drive I've delivered with my hard drive, installed months ago and works well so far, doesn't seem to have the type of the file of the search dialog box.  Please help - what is needed to move forward with this repair? Brett Henrichsen

  Download the SATA drivers:

  http://www.ASUS.com/product.aspx?P_ID=ShiLE9XNeuFKwFDC

  "A programmer is just a tool that converts the caffeine in code" Deputy CLIP - http://www.winvistaside.de/