cannot complete the recovery after a hard disk replacement

Similar Questions

• Cannot complete the recovery process after replacing HARD drive

  Hello

  I changed my hard drive it for 15 days because he showed abnormalities, so I bought a new hard drive Seagate Western brand with the same technical characteristics as the existing hard drive (product for the product).

  I was then on TOSHIBA HDD RECOVERY to burn to CD system recovery disks, then I went to replace the hard drive.

  After the change, I raised my PC with system restore CD.
  The procedure is successfully completed and orders of comments asking me to remove the disk and restart the PC.

  I raise the PC, everything goes well, launch windows, installation of perfect records system then comes the stage of installation and settings of the system here after the error message:

  "Windows Setup could not configure Windows to run on the hardware in the computer."

  Then it asks me to restart, then it comes back every time on this message, I'm stuck on this step.
  I tried to change the mode of the disc source hard 'compatibility' instead of 'AHCI' but it's even worse, it completely without error buggy.

  Please give me an explanation of this phenomenon.

  Sincerely.

  Guillaume

  Have you tried to repeat the whole recovery procedure?
  If this is not the case, do.

  I recommend to format the whole HARD drive and create an NTFS partition.
  Then start the laptop using the Toshiba Recovery disk and start the recovery procedure.

  I read about the problem of disk HARD similar in the past and especially NFS partition creation has helped to solve these problems.

• Equium L20 - cannot complete the recovery procedure - disk error

  Hello

  I have a laptop Equium L20 and whats happened is, during a recovery of product, he gets to 25% then emits an error at me and stops working.

  Now when I turn on the laptop, I get the Toshiba screen, then nothing.
  I was informed that my drive is probably broken and I now no operating system but I am a complete computer novice so don't know how it is.

  I took the laptop to PC world a few years ago and they run a recovery of product but I did not my drive, so I want to know is, is it possible to run recovery without the disc?
  (seems to me just don't forget the sound by pressing a few buttons)

  If so, how?
  And if not what someone have any suggestions as to how I can restore the computer?

  Thanks in advance

  Hello

  > during a recovery of product, sometimes about 25% then emits an error at me and stops working.

  As you mentioned, possibly recovery disk is defective, broken, or similar, this could be the reason why the CD/DVD drive is not able to read the disc and the installation breaks upward.

  You cannot get this phone without the recovery disk! It is an old series laptop and it does not support the HARD drive recovery process, as do other mobile most recent.

  If you have only two ways to install the Windows operating system; you need to use the Toshiba recovery disc (which seems to be broken) or you can install the operating system by using the Microsoft Windows XP disk.

  If install you the operating system using the disk of MS original then you need to install the drivers of Toshiba which are placed on the European driver Toshiba page (look in the archives).

  PS: maybe you could try to burn (copy) the recovery disk using another computer.
  In some cases of the different drives are able to read scratched discs.
  If you want to be successful and if you want to be able to copy the recovery disk, you can then use the new disk in order to restore the operating system on your computer satellite phone.

• G6-1103sa Pavilion, completed the recovery after problems, but does not restart after recovery

  Hello

  I have a Pavilion g6-1103sa, with Windows 7, after a few problems of software I could just get to open in safe mode, so saving docs and images on a remote hard drive successfully, tried to complete a restoration of the system to the factory settings by pressing the ESC key on the switch and selecting the option to do so.

  When the restoration is complete, the there is a message saying that the restoration was a success and the laptop restarts, however all that happensis a message appears saying: your computer is preparing for first use, but then nothing happens

  What can I do now?

  Hello dgreen1004,

  Like the previous step to reinstall the OS from the recovery partition has failed, the only other option is to try a recovery media. Per your request, I am including information on how to get a recovery media. Please open the link following "Research drives HP recovery or a USB HP recovery disc?".

  Kind regards.

• Satellite P10: Need for disk recovery after a HARD disk crash

  I have a Toshiba p10 and the HD broke down. I've had this machine for 2 years, but I bought it 2nd hand, so I have no disks in the system.

  Where can I get a system recovery disk and it is true that the recovery disc can work if I install the HD the same size? The current drive is 30g and I would like to install a disk 40g instead.

  Thanks for any help you can offer.

  Hello

  No, that's not true. You can use a different HARD and the recovery CD disk sizes has nothing to do with the HARD drive compatibility.
  You should only be sure that the laptop and the BIOS will recognize the new HARD drive size, but I think that the 40 GB are supported on this laptop.

  So if you put a new HARD drive in the laptop you have to boot from the CD drive.
  To my knowledge the CD recovery and all devices supported and compatible, you can buy from the Toshiba service partner in your country.

  I found the link on the Toshiba support page, so I recommend you to visit this site.

  Good luck

• CANNOT COMPLETE THE RECOVERY

  I HAVE APRESARIO, ALL DATA FROM MICROSOFT HAS BEEN REMOVED AND REPLACED BY LYNOX. I BOUGHT RECOVERY DISKS. EACH A LOAD, BUT HE CONTINUES TO GO TO A SCREEN THAT SAYS PLEASE WAIT. WHEN I HIT ESC. IT SAYS LOOKING FOR A 0% BLOCK IT PLEASE HELP. ALL DISKS HAVE DOWNLOADED THE COMPUTER WORKS BUT SCREEN GUARD COVERING THE SCREEN. I'M NOT GOOD WITH COMPUTERS BUT I KNOW THAT IT IS SOMETHING SIMPLE. THE SCREEN IS NOW BEHIND THE ONE I'M ON. IF I GIVE YOU MY PHONE NUMBER CAN YOU CVALL ME IF I CAN BETTER EXPLAIN WHAT HAPPENED IN THE CONTRARY CASE I THANK YOU FOR THE INFO. IS IT POSSIBLE FOR YOU TO ACCESS MY GRIP OF COMPUTER SCREEN TRAORE SAID BREAK KITCHEN SO IT IS NOW THAT HE'S STUCK. CODE blue 81NAv3PrA2 SAYS

  You should review the recovery procedures with the computer manufacturer who sold you the recovery disks.  They know the process. Every business is different, so it is difficult for us to help you restore your system with recovery disks or to help with recovery disk problems.

  I'm sorry, that we cannot be of more assistance.

  Good luck! Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Changed the original after imaging HARD disk but can get Windows 7 valid

  A SONY VIAO bought in 2010 with a 500 GB hard drive. Started to get those bad guys, messages "imminent HARD drive failure" has created an image using Acronys on a new hard drive of 1 t and traded in. Everything went well until I started getting messages "your computer is not running genuine Windows" (rror code 0xc8000247).  Did all the research, including the call the MS Product Activation Center and the robo-man to give the key that came. Robo-man returned and says invalid key, back to the drawing board (buy W7 for $108, backup all data and programs, install and rebuild the contents of the hard drive). SONY said that they would not help me because I had replaced the hard disk provided with the system. Even though it was about to fail, I should put it back in and call to hide...

  So now what should I do?  I have the product key (from the label under the system), the Windows ID of the information system...

  The common cause for these mismatches is a defective Intel Rapid Storage Tech driver

  Download and install the latest version of...

  http://Downloadcenter.Intel.com/Detail_Desc.aspx?AGR=Y&ProdId=2101&DwnldID=21730

  Then run another MGADiag report and view the results.

• Cannot complete the order after the iPhone booking 7 during the pre-order?

  Not sure if this is the appropriate place to ask... but did anyone encounter this problem with their iPhone 7 pre-order?

  After that I tried to place an order for the iPhone 7 more during the pre-order, I received an email from the Apple Store saying that my iPhone had been reserved and provided me with a reservation number. They said that they send an email when they were able to reach the carrier systems so I could place my order. Very quickly after I got a follow-up email confirming the booking number and was told that I could now go ahead and place my order. I have connected to the Apple Store, who acknowledged my reservation number, almost all of the screens orders went through, but when I hit continue to confirm the pricing plan that I had selected, the next screen shows the page of 'the page you are looking for is not found' dreaded.

  E-mail with the reservation told me that I don't have that until 4 PM PDT 9/10 to complete this order. Everyone knows this! I tried through the app store of Apple, Safari, and Chrome... and always get the same question. I've been on hold with Apple now for 45 minutes trying to get through, and they don't take chat requests. I'm so frustrated! Help!

  The site is probably hammered with requests for pre-order. I'll try again later if I were you.

• Cannot install the Windows Server 2012, hard disk not found driver DC

  during the installation of the windows server Datacenter edition 2012 on HP desktop using a USB flash drive I do not get the list of the hard drive for formatting and install an operating system on it. Help, please.

  Server issues are better managed to the:

  http://social.technet.Microsoft.com/forums/en-us/home

  So please post your request there.

• How to share the root of a hard disk in Win7?

  I am able to share a folder, but cannot share the root of a hard disk. Homegroup is off.  In addition, even if I have the password to 'OFF' I always get invited to do since the XP computers on the network, but not Vista computers. Weird?

  Win7 computers have full access to the C:\ root on Vista and XP in network of machines. But on computers Win7 the C:\ root is blocked. How to open readers for full access. I worked with permissions in fsmgmt.msc without a bit of luck. What is going on. It is not that difficult.

  I have several hardrives with hundreds of directories and must share each individually. There must be a way around this?

  Why everyone does not assume that the implications of the root of a drive of sharing are unknown. I get it. I Armi it. But, Yes... I want to share the root of my records. It's like a big giant microsoft diaclaimer whenever I hear it.

  So I thought to it. Finally!

  OK, that's the problem with Windows 7: I had possession of the disk on the local computer (by default), but this is not enough. I had to give "everyone" the drive to another computer to access property. That means logging in inspired by the network from another machine to Win7 computer, you property as "everyone" and therefore, the authorization to access the drive.

  So, here is what I did. Right-click on the hard drive from windows Explorer. Go to properties. Click Security. Click on change. "Everyone" add to the Group and the permissions you want. Then, go to sharing and share the drive as you normally would. The root of the drive will be accessible on the network.

  I understand it now, but it is poorly explained in documents I've read. I spent hours of research on this and cannot understand why MS makes it so hard to share a drive on a network. Totally absurd.

  I hope this helps others trying to do the same thing. In a small home network, it is very common need to share multiple disks in the root of c:\.

• cannot reactivate the CS2 after the hard disk crash - site says I need to talk with adobe (activation can be done online) but the customer support page loop all around - help/activate also not going anywhere - it's a pc - thank you!

  cannot reactivate the CS2 after the hard disk crash - site says I need to talk with adobe (activation can be done online) but the customer support page loop all around - help/activate (since the opening page of CS2) also not going anywhere... it is a pc - thank you!

  message says 'unavailable activation server this time... error code 24:24.

  Error: "Activation Server is not available. CS2, Acrobat 7, pass a hearing 3

• Windows recovery system cannot read the recovery disk

  I have Vista laptop computer model pavilion POS, when I bought it, I made a creation of recovery disks, but now when I put it in my PC to see contains I see an error that Sandra insert your disc and system cannot fix it and I also used microsoft fixed it Center but cannot fix it.

  Hello

  Here are all the HP information on different methods to recover back to factory settings

  Three ways to recover the PC to original operating status

  You have a choice of three ways to run a recovery and restore your computer to its original state. The recovery process may take an hour upwards or more and is not complete until the prompt to connect to the computer. When the recovery is complete, don't forget to run the update of Microsoft Windows and the HP health check to install all the drivers updated and software.
  1. If the computer can boot to the Windows desktop, start the Recovery Manager.
  2. At startup, press f11 to start Recovery Manager.
  3. Restore the PC to its original state with the HP Recovery Manager of in Windows Vista
     If the PC can be started and opens on the Windows desktop, you can use the HP recovery disk to restore the PC to original factory State by following the steps below.
     1. Click Start and enter the recovery in the field of research. Select Recovery Manager in the list, when it becomes available. Allow the action to proceed, if you are prompted. The HP Recovery Manager opens.
        Alternatively, click Start , all programs , Recovery Manager , and then Recovery Manager . Allow the action to proceed, if you are prompted. The HP Recovery Manager opens.
     2. Click Advanced options , System Recovery , and then click Next . The PC will restart and reopen the Recovery Manager.
        Alternatively, if the advanced options is disabled, click Next , and then System Recovery . The PC will restart.
     3. When the PC restarts, select the System Recovery option and click Next .
     4. If you are prompted to use the Microsoft System Restore , click No and then click Next .
     5. When you are prompted, select back up your files first (recommended) , and then click Next . Follow the on-screen instructions.
     6. When you are prompted to recover without backing up your files , please STOP before you click Next .

        CAUTION:

        It's the last chance to change your mind recovery PC and delete all the files and programs. Once you click Next , the restore process cannot be stopped

     7. If you are convinced that you want to start the recovery process, click Next . The PC immediately starts formatting the disk hard drive and destroy all data.
     The recovery process may take up to several hours and will return the PC to its original state. All custom, settings drivers, software and upgrades or hardware updates are lost and must be reinstalled.
     Restore the PC to its original state with the HP Recovery Manager if Windows Vista is not accessible

     If the PC does not start under Windows, it may still be possible to use the HP recovery disk to restore the computer to its original state. The Recovery Manager can be started during the boot process by following the steps below.

     1. Press on the button / stop to start the PC and press the f11 key when the standard BIOS guests appear on the black screen.

        NOTE:

        By pressing the f11 key at startup on a computer with an image factory HP will start the system recovery process, even if the message is not displayed.

        • If the HP Recovery Manager can access the hard disk recovery partition, a prompt to back up user files before you start the recovery
     . Follow the instructions.
     • If the HP Recovery Manager cannot access the hard disk to resolve system errors, you need to use the recovery disk custom that you created to recover the hard disk to its original state.
     • If you have not created the custom recovery disk, or disks are damaged, you can order a replacement of HP recovery CD.

  4. When the Recovery Manager starts, follow the instructions of recovery step by step , shown above.
  Solve a common problem of recovery.
  If the original operating system is changed to a non - Vista OS, the Recovery Manager cannot be launched either office or by pressing f11 at startup. You can use the recovery disk to restore the computer to the original state of Vista. If you are using a non - Vista OS, you can use a third-party partition management program to recover hard disk space.
  Restore the PC to its original state with the recovery discs

  If the PC cannot access the Windows desktop, and the Recovery Manager cannot be started by selecting the f11 at startup key, you can use either the recovery disc custom that you created, or you can order a recovery CD to replace HP, to boot the PC and restore the hard drive to its original operating state.

  NOTE:

  Run the recovery process by using the custom recovery disk you created can take less than an hour, while you use replacement discs ordered directly from HP can take four to six hours and includes several reboots.

  If the HP Recovery Disk Manager can access the hard drive, it will attempt to repair the recovery partition. If successful, a prompt to continue execution of the recovery using the Recovery Disk Manager.

  Use the recovery discs to restore the PC by following the steps below.

  1. Insert the recovery disc into the optical disc drive and start the computer.
     If the computer is running, insert the reinstallation disc and immediately click on Start and select restart to force the computer to boot from the recovery disc.
  2. When prompted, Press any key to boot from the CD or DVD, press any key on the keyboard.
  3. Leave the recovery disk boot and load the files required, while the Microsoft loading screen appears. It may take several minutes to load the required files.
  4. When the HP Recovery Manager window appears, click Advanced options , System Recovery , and then click Next to open the Recovery Manager.
  5. Follow the on-screen instructions and perform the necessary actions.

     NOTE:

     Do not interrupt the recovery process even though the computer may restart, and the Windows desktop can display at different times.

  • When you are prompted, follow the on-screen instructions to backup user files.
  • After completing the backup, when you are prompted, reinsert the recovery disk, and then click Next to continue the recovery process.
    A status box is displayed to indicate the State of the recovery and the estimated remaining time.
  • If you have used several disks when you created the custom recovery discs, follow the prompts to remove the first disc and insert requested discs.
  5. When you are prompted to Insert additional driver disk , take one of the following actions:
     • If you purchased a replacement of HP recovery disk and it included an extra driver disc, insert the disc, and then click OK or Next . The recovery program checks the additional drive and installs the necessary files.
       After you install the additional files, a prompt to remove extra disc and insert the original recovery disk.

     • If you bought a replacement at HP recovery disc, and he didn't get an extra driver disk, click ignore or Cancel . The recovery program will ignore the request and install the following file on the recovery disk.

     • If you have created a personal recovery disc, press Next to continue.

  6. Continue following the onscreen instructions to complete the recovery process.

  NOTE:

  If you have not created a personal recovery disk or the recovery disk will fail or corrupt, see HP - order recovery discs for Windows 7, Vista or XP laptops for more information.

  7. I had to rebuild my computer after a hard disk failure. How can I reinstall the CC that I already paid for?

     I had to rebuild my computer after a hard disk failure. How can I reinstall the CC that I already paid for on my new drive?

     Install the application of cc on your new hard drive desktop, https://creative.adobe.com/products/creative-cloud and use it to install your programs of cc.

     [moved from the download, installation, commissioning creative cloud download &install]

  8. Cannot complete the order of flow due to a disk error.  any ideas?

     Cannot complete the order of flow due to a disk error.  any ideas?

     Well, I got up to reinstall Photoshop but that did the trick.  Thanks for your help. I took your advice, but nothing has been appearing in the console application.  But all is well now

     Lester

  9. Windows cannot complete the installation - Toshiba NB250

     Hello

     My netbook has been sitting not used and the road for about 6 months.
     When I tried to use it the other week he was very slow and kept crashing so I tried to erase the unwanted programs from him but I couldn't.

     The netbook kept crashing whenever I tried to uninstall programs and try to do something about this, even open internet explore took about 5 minutes, it's faster on 15, laptop of my father who has a huge 256 MB of ram in it! I gave up and decided to restore it to the factory settings. I found Toshiba HDD recovery option and follow the instructions.

     The way in which the process a window pops up saying "Windows could not complete the installation. To install windows on this computer, restart the installation '. I clicked on OK, all in all I rebooted the machine about 6 times with the same message.

     I tried to boot into safe mode and in the 5th test (previous 4 raised the same message) I "cannot start Windows.
     A recent hardware or software change might be the cause. To solve the problem:

     1. Insert your windows installation disc, and then restart your computer
     2. choose your language settings, and then click "Next".
     3. click on "repair your computer".
     File: \windows\system32\config\system
     Status: 0xc00000e9
     Info: Windows could not load because the system registry file is missing or corrupt.

     Now, I bought a new USB drive and booted from that. The first time it kept freezing during configure them then wouldn't start at all. The second date he kept freezing and then took more than an hour to load windows. I left it for a few days, came back to him and all I could get is a black screen with a white cursor. I now need the netbook for Monday so try again.

     For tests 3 and 4 I run through gentle but end upwards with ' Window3s could not complete the configuration of the system. An attempt to take over the configuration, restart the computer. »
     Been several times since both trying without success. Currently looking for a hammer...
     There are now two different options for operating system on it, I tried both, but get the same answer at the same time.

     Someone has an idea, what happens?
     My warranty is I think (is there a way to check?
     I don't remember when I bought it! It was last year or the year before) so I don't think I can get any help from anywhere.

     Hello

     It is not easy to say what the problem is here. If the recovery image and HARD drive are OK, you should be able to install recovery image and use your neetbook with the factory settings.
     When you've got this netbook as a new machine, I assume you didn't create recovery USB support. Can you confirm this?
     > Now, I bought a new USB drive and booted from that.
     And what is recorded on this USB key?

     I can't say with certainty what the problem, but now you should test original recovery image installation and see what happens. In case the same thing happen over and over again, the problem may be related to the HARD drive.