Changes do not think in the discoverer workbook

Similar Questions

• I have 3 short videos I tried emailing stuck in Outbox of my iPhone 6. They tried to send more than an hour. I can't delete them, "Change" is not available in the Outbox. How can I get rid of these so mail will stop trying?

  I have 3 short videos I tried emailing stuck in Outbox of my iPhone 6. They tried to send more than an hour. I can't delete them, "Change" is not available in the Outbox. How can I get rid of these so mail will stop trying?

  Can drag you across the message in the Outbox overview to get the Red delete button? It's been a while since I had paste an email in the Outbox, so I don't remember if that's possible.

  IF your account is an IMAP account, try to delete the e-mail on the Mac. Actions sync between devices in IMAP email, so they should be in the Outbox on the server and you should be able to get to them in the Mail from Mac application, use you it, or in a web browser on the server.

  IF this is not possible for some reason, try the mail application to the phone reboots and the closing force force the phone and then try again. Press the Home button twice quickly. You will see small glimpses of your applications recently used. Blow up the Swipe on application brief mail app to close

  To force the reboot your device, press and hold the two buttons of sleep/wake and home for at least ten seconds, until you see the Apple logo.

• Updated windows HP 2000 error failed revertong configuration changes do not turn off the computer

  This computer is my friend.  I don't know what she does for her.  I fixed it before, but it worked one for hours and the same message is still there.

  "HP 2000 failed configuration error windows update revertong changes do not turn off the computer"

  Can someone help me please?

  I forgot too say what Windows 8.

  Hi @Margaret_62 ,

  Welcome to the HP Forums!

  It's a great place to find answers.
  You have the best experience in the HP forum, I would like to draw your attention to the Guide of the HP Forums Learn how Post and more

  I understand that your friends laptop HP 2000 is blocked on "default configuration of the Windows updates. Restoration of the changes. Do not turn off your computer"and worked for hours.

  First of all, I would like to try a hard reset. Performing a Hard Reset or forced Reset.

  If the problem persists here are some links that may help.

  "Configuration of the Windows updates failed. Restoration of the changes. Do not turn off your computer"error when you try to install Windows updates (from support.microsoft.com)

  Computer won't start (Windows 7, Vista, XP)

  If this is not resolved so, you can try a Refresh Your PC to solve problems (Windows 8).

  This will reinstall Windows, but does not affect your personal files.

  If you need further assistance, please provide your exact model of 2000 HP notebook and the result of the resolution of the problems.

  How can I find my model number or product number?

• I edited an online form that is already on a live Web page. Why my changes are not reflected in the live page?

  Work in Adobe Business Catalyst. I added a choice to a created previously (drop-down list) field on an online form. This form is already active on a page. Why isn't my new choice reflected on the live page?

  Inline shape in HTML format in the/template/layout rather than a module probably so any changes made on the web form, an administrator be reflected.

  Different situations may occur depending on the implementation of this form, you will need to look at the issue. Could be a module and you are not updated to the more custom option code disks, it may be liquid and as an inclusion... Can be a few things, probably the first good.

• value change event not called on the evolution of the value falling down

  
  Hello

  I have a drop down with values such as... 1-25, 26-50 and so on.

  I need to see the 1-25 as pre-selected when the page is loaded. and when we change the value in the drop down a listner valuechange is called and will service call.

  But when I again selects the default 1-25, at the time where only the value changes listner is not called.

  To show the value that pre-selected I put:-noOfRecSOC.setValue(1);

  noOfRecSOC is the drop down on the screen.

  You must not directly set the value in the UI component. Use the property value drop-down list together for years by default here. Otherwise the value change listener do not notice the change to the original value (as it is never changed).

  You can use a variable temporary pagedef for the value. check out my blog Creating Variables and attribute Bindings to Store values temporarily in the PageDef | JDev & amp; ADF Goodies to find out how to do this.

  Timo

• Adjustment layer changes do not appear in the Actions

  Problem with action in Photoshop CC
  This problem occurs only on my own computer, on another computer, no problem.

  If I do a deed containing an adjustment layer, for example a curves adjustment layer, it is designed to neatly. I then make a change to the curve, it does not appear in the image and history, but not in action. What's not?
  I have to remove and reinstall all CC photoshop? Make licensing issues?

  Post edited by: Brett N

  Hello

  See if unchecking generator plugins in the photoshop (edit) > preferences > plug-ins makes a difference.

  Additionally, make sure that you have the last cc updated photoshop by going to help > updates of in photoshop cc or by using the creative application of cloud.

  

• Oracle data apps do not show in the Discoverer

  When you run my query in sql developer, I have to run the command apps.fnd_global.apps_initialize (user_id, resp_id, resp_appl_id) in order to show the results of my query. Otherwise, the query returns nothing. The problem is I am using this query as a query custom for my discoverer report and my report doesn't show any folder. Someone knows how to handle this?

  Hello

  There may be several reasons why a discoverer report returns no data, but I don't think it will be because the session is not initialized apps. Check that the language has been correctly set, using the calculation userenv('lang').

  As I don't know anything about your environment, it is a little hard to guess what else could cause this problem. Is there something different about this report? What is the custom query that you use?

  Rod West

• 11 media player changes do not appear in the name of the file or media center library? UPDATED, I FOUND THE ANSWER, IT IS SIMPLE AND HAS NEVER MENTIONED TECHNICAL SUPPORT ENGINEERS THAT IT

  I ripped CD via MP11 and the Windows lossless format.  After having them, I decided to change the tags like for some of them, a right click, type, no problem.

  In MP11 genre tags now show that what I changed them but when I go to the Vista Media Center music library, which is to look at the record music CDs ripped are genres appear as the original labels I came when they were torn.  When I look at the music files also have the original genre listed.

  How can I get the genre has changed in the file information (I guess that Vista Media Center uses this information when it displays the kind) in Media Player?

  Hello Kent,

  Thank you for using the Microsoft Answers forum.  I suggest you to remove the Media Center files and add them.
  Thank you for using answers Forum. Please let us know how it works.

  Joseph
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• AFTER THE DOWNLOAD AND INSTALLATION OF WINDOWS, ILS UPDATES BEGIN TO SET UP, AFTER I READ UPDATES WERE NOT CONFIGURED CORRECTLY. RESTORATION OF THE CHANGES. NOT PUT OFF THE COMPUTER.

  RECENTLY RE INITIALIZED HARD DRIVE.

  You don't say if it goes back to run correctly, or you are caught in a loop.

  Read this info:

  http://www.bleepingcomputer.com/tutorials/tutorial140.html

  Understanding Windows Update and Extras in Windows Vista at the link above.

   

  Remove the Vista updates; two ways to do this:

  1. a System Restore to before the updates:

  Click Start > programs > Accessories > system tools > System Restore > restore time/choose your own date > next

  If you use Norton, disable it before using the system restore.

  If it is impossible to enter the Normal Mode, do a Safe Mode system restore:

  Press F8 at the startup/power and the list of startup options, use THE ARROW key to select Safe mode > and then press ENTER.

  System restore steps according to the info above.

  Also:

  2. click on start > right click on computer > properties > Windows updates down the lower left corner > updates installed in the lower left corner in the next window

  > then click the one that you don't want > uninstall will appear at the top > uninstall it.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  In addition, on the page where you clicked "Installed updates", click on change settings at the top left corner it

  > Change update settings in the next page of AutoUpdate to "check for updates but let me choose etc" > OK ".

  When you take a look at pending updates, you can either download/install them one at the time, namely the update causing you problems.

  > or if you do not need an individual > right-click on > UAC prompt > hide it

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  If the above does not solve the problem;

  You will get the best help for any problem of Update/Service Pack in the Windows Update Forum; the link below:

  http://social.answers.Microsoft.com/forums/en-us/vistawu/threads

  When you repost here, kindly include the Error Codes, and exactly what is happening when you try to update.

  In this way, you will receive the best help.

  See you soon.

  Mick Murphy - Microsoft partner

• Weather in dyn/admin changes do not think

  I have a programmer with a job to do at regular times.

  This is the component with calendar time default 10 minutes.

  $class = xxx.xxx.xxxxxxx

  $scope = global

  loggingDebuig = true

  #Schedular service

  programmer = / atg/dynamo/service/Scheduler

  schedule = every 10 minutes

  Method #Thread

  threadMethod = 2

  jobName = StatusChecker

  jobDescription = check the status of

  When the server is started, the Scheduler is started and works very well for every 10 minutes. But when I change the time from 10 minutes to 5 minutes in dyn/admin, he is not having reflected in server.

  What could be the reason... ?

  After changing the calendar in dyn/admin can call the doStopService, then the doStartService method in dyn/admin and then see if your changes reflected. Thank you.

• Impossible to change fonts not supported in the graphic in InDesign

  Help Help Help?  I'm almost my deadline and my Epub keeps getting rejected by printers because the fonts are not included.  I went and changed some of the fonts receives errors, while they are now open type/True type fonts... and are very good.  However, I still have 13 errors appear, indicating that my graphic fonts are not compatible.  I have not all fonts in my graphics and can't change that. The button is grey when I try, so he won't let me.  I need help, because I was not able to contact Adobe, and my deadline is drawing near.  Thank you very much.

  pennye34945020 wrote:

  ... 13 errors appear, indicating that my graphic fonts are not compatible. I have not all fonts in my graphics...

  There must be direct type in graphics; InDesign has just this error.

  .. I am unable to change that. The button is grey when I try, so he won't let me.

  Right.  To change the fonts in the graphics, you can do so via the dialog box search a font of InDesign; you need to open/change the graphics themselves.

• extensio VO is not thinking in the instance

  Hello
  
  
  I have to hide or make read only records based on another value of the column.
  
  So I extended ScorecardObjectivesVO and I added the substitution in the project properties.
  
  I'm not having access to the command prompt, so I have to use PuTTY alone, so I used the following command to import the VO extension into the database.
  I moved the jpx, jpr files under my projects to the server.
  
  Java applications oracle.jrad.tools.xml.importer.JPXImporter $JAVA_TOP/at/oracle/apps/per/wpm/objectives/server/FgbExtend.jpx - username username-password < pwd > - dbconnection ' (DESCRIPTION = (ADDRESS_LIST = (LOAD_BALANCE = YES)(FAILOVER=YES) (ADDRESS = (PROTOCOL = tcp) (HOST = < host name >)(PORT=1521))) (CONNECT_DATA = (SERVICE_NAME = < SERVICE_NAME >))) ".
  
  After executing the above in putty, I received the following.
  
  Any document: / at/oracle/apps/per/wpm/objective/server/customizations/sit e/0/ScorecardObjectivesVOEx
  Import completed successfully
  
  
  I bounced apache but I still don't see the changes in the subject of the page.
  
  Please help me solve this problem.
  
  Thanks in advance,
  SAN

  It seems you haave wrongly substituted
  Customizes = "/ to/oracle/apps/by/OMP/objectives/Server/ScorecardObjectivesVOEx" >
  

  Personalizes him should be sown vo and replace by should be your custom VO. change of the jpx and import again.

  Kind regards
  RAM

• How can I make a second copy so I can make some changes, but not to lose the original document?

  How can I make a copy of my new convert pdf word document without losing the original document?

  Hi mariponce,

  Please see my reply to your post duplicate on this topic: How can I make a second copy so I can make some changes, but lose the original document?

  Best,

  Sara

• Folio changes do not appear in the app

  Hello.

  We have two folios in two different applications on which our modifications does not reach the app.

  • If we update the folio, there is no button "Update".
  • If we do not publish, it remains in the app.
  • If publish us it with new content under a new product ID, the old folio can be downloaded but a new can not.

  Other folios in the same application work as expected.

  Looks like a problem with publishers. Can anyone confirm that?

  Or is it something else? If so, how can it be resolved?

  Thanks in advance!

  Toni

  Contact the business support and ask them to look into the issue. It is rare, but sometimes there's a weird State in what a folio can enter, and maybe it's one of those cases.

  We find contact information by logging on http://digitalpublishing.acrobat.com and see the Middle at the bottom of the page.

  Neil

• NTP changes are not visible in the client

  Hi @ll,

  I changed the time server of all our ESX servers. No problem at all. I did it through the service console. (ntp.conf + step-tickers)

  Everything works fine, but I can't see the changes in the vi client. Why is this?

  Same result with my PowerShell Script (Get-VMHostNtpServer). The old servers are always displayed.

  Any idea?

  THX

  Matthias

  have you tried to restart management services?

  access host via ssh and run service mgmt-vmware restart AND service vmware-vpxa restart and check again in customer if change.

  also check http://kb.vmware.com/selfservice/microsites/search.do?language=en_US&cmd=displayKC&externalId=1003063