NB520 - access to the memory Module

Similar Questions

• Tecra R10 - how to remove the memory module?

  Hello!

  How to remove the memory module?

  Get the following message and for me, it means that one of the modules is broken:

  Out of memory error
  Address = H 00034000
  Read Date = H 28034000
  Write data = H 00034000

  For my opinion, the computer should start up again when I remove the memory broken slice?

  The Australia has soon

  Hello

  You can easily remove the memory modules.
  I think that the Bay is placed at the bottom of the unit.
  Remove the screw that is blocking the Bay, and you will have access to the module.

  Here is a video of how do this on another Satellite L500 laptop. But the procedure is not very different on Tecra R10
  http://forums.computers.Toshiba-Europe.com/forums/Ann.jspa?annID=81

  I hope this helps a little

• Satellite M70 - how to remove the memory module

  Can someone post instructions on how to remove / add modules of memory for Satellite M70?
  Thank you
  FS

  Hello

  It of not difficult to remove or Exchange the memory modules because you only check Chapter 8 and 9 of your owner's manual. In the user manual, you can find a detailed explanation how to do this with a few photos and what you need to the modules of RAM.

  Check this box!

• Portege 4000: Where to insert the memory modules live

  I wanted to just extend the memory of my Portege 4000, but I didn t find installed RAM.
  I ve opened all the screws, I found (without opening the whole case), but I didn t find the RAM slots.
  Does anyone know where to insert the RAM?
  Thank you very much
  best wishes from the Austria
  Markus

  Hello

  Module of memory is under the keyboard on the right side near the mouse pad. If you only, please be careful and remove the battery before you begin.

• Question about the use of the memory modules

  I have a dilemma between the use of a new 1 GB memory (what I intend to buy) with more speed
  and by using the 1 GB + my old 256 with less speed
  which option will contribute more?

  Hello

  The fact is that if you use 2 different memory modules with different properties (of lower performance) so the laptop can run with lower performance. This means that the 256 memory module slows down you memory. The best way is to use the same modules having the same properties.

• Satellite L50 - B - 1 HM - how to replace the memory module?

  Hello

  I have a Toshiba Satellite L50 B - 1 HM, product number: PSKTAE 072017CE. It has 8 GB of RAM but is expandable to 16 GB.

  My question is, should I buy a 8 GB memory module? (and I would add up to 16 GB).
  Or should I buy a 16 GB memory module to completely replace the memory of 8 GB?

  Memory 8 GB Toshba module I've found is the following: P000577360

  Thanks in advance

  Kind regards

  Hello

  Googling around, I found also specification for your model of laptop and if I understand it is just your machine can be upgraded up to 16 GB for you can use 2x8GB.

  Compatible 8 GB of RAM for your machine has PA5104U-1M8G part number.

  I n t have this model of laptop, so I put t know if there is coverage of RAM placed on the lower side of your laptop. If this isn't the case, RAM could be placed under the keyboard so RAM upgrade must be performed by the Toshiba service provider. Removal of material or to open the case of the laptop on your own is the warranty.

  Be careful about this.

• Connected by USB PS 7510: access to the memory card?

  For the past year, I had my PS 7510 connected wireless to my home LAN. The memory card appears on my computer (Mac OS X) in my list of devices, and I could access the images that I had scanned it. Changes of houshold allowed me to change my setup and I chose to disable the wireless function and use the USB to connect to the printer. All functions work well, though the memory card is not visible or accessible from any of my applications. Access to the computer is the card memory limited to wireless connectivity? Best regards, Brian

  Thanks for your effort.

  I had already applied the way you suggested in your last post, but I've been through once again, deleting and adding the printer. No immediate joy. Then I took a look at the data in the system and I was wondering why I couldn't see even the card on the printer on the USB port. I was wondering, ad did what I should have done from the outset - I removed the card and reinserted and then he appearred in my list of device as you wish. I feel a little stupid for not having done this before.

  Once again, thank you for the effort and support. I'll look to mark the post as solved.

  Brian

• BlackBerry Smartphones Priv - access to the memory card for media photos

  I worked on how to record photos (attachments email; when the Save button is facing the edge, it was a bit a helping hand), and I save on the memory card.  But where did they end by?  How to access photos on memory card?

  Thanks to some research by keywords, I fell randomly on the charges which do not seem to be accessible via folders Photos/camera...  But I can't find to display the new anywhere and the charges that should be here are not visible to me...

  In addition, how to change the order of the files, or indeed the names of files in the files of the device in the Photos app?

  Have now managed to connect using the USB cable, so access SD card and move the photos to the visible file to the Photos app.  It's DCIM - camera.

  They are then visible on the Photos (first page is always useful), as well as always appearing on the records of the unit.

  If connection problems via USB to access the SD card, see the thread on that.

• Trial of LR expired, bought the CC, but still no access to the develop module

  Hi, I got a trial version of LR, which has expired.  I bought the CC, and when I run the desktop application, next to LR, it says trial has expired and makes me want to buy.  But when I click on buy, it says correctly that I already bought it.  LR is open, but the develop module is disabled - it says that I need to renew my membership to reactivate the develop module.  I've been around the FAQ and this on board and we tried various things, but nothing has helped. Any ideas?

  Hi Karen,.

  Please follow the steps in the below help document for this problem:

  Sign out, sign in | Creative cloud desktop application

  Kind regards

  Sheena

• Satellite C50-B-13D - how do I access the memory module

  Hello

  I can't find a guide around here and said Toshiba laptop support site can have maximum of 8 GB of memory, that I bought but can't see an access panel and don't really want to go unscrewing things without knowing the exact procedure!

  Thank you

  Hello

  The Satellite C50 - * B * series doesn t contain more memory cache-location at the bottom of the device as C50 - A Satellite and others usually do.

  So it's not possible to upgrade with the RAM without voiding the warranty.
  From my point of view of the rare such upgrade must be performed by authorized engineers.

  However, if you n t care about the warranty, you can see videos from youtube showing the instruction how to remove the bottom cover (search + Toshiba Satellite Pro C50 - B disassembly +)

• Satellite A210-18s - can I use the memory modules?

  My laptop is an A210-18, PSAELE.
  It has 2 x 1 GB DDR2-PC5300 (667 Mhz) memory.

  Can I replace it with 2 x 2 GB PC6400 (800 Mhz)?

  Gr. + Thanx
  Willem

  Hello

  I checked the specifications of Satellite A210-18 and it supports up to 4 GB of memory. This means that you can replace with 2x2gb modules.

  But according to the specifications it supports only DDR PC5300 speed up to. PC6400 will work, but they only work with PC5300 speed. All that, but they work!

• Tecra A4: The difference between the memory modules

  Hello.

  Could someone explain the difference between the modules of memory called PA3311U -1PA3311U and M25 -2M25?

  And is it possible to use Tecra A4 with PA3311U - 1 M 25?

  Thank you.

  Hello

  Tecra A4 supports these modules:

  DDR2 400/533 256 MB (PA3389U - 1 M 25)
  512 MB DDR2-400/533 (PA3412U - 1 M 51)
  1 GB OF DDR2 400/533 (PA3411U-1M1G)

  In addition, you can google a bit for cela other numbers of add-on memory and compare these parts. I m you will find a host of information

  Good bye

• Help: HAVE Chan 2 volts, 1 AO Chan Volt. UH VI Code gives access to the memory

  Hello:

  First of all, I am a total newbie to Labview so apologies if the answer seems obvious, trivial. That's what I seem to be able to put together based on screws of the sample as well as reading here. Some details of the implementation

  * Application: 2 AnalogVoltage input 1 channel data acquisition channel analog output voltage of DAQ devices

  * Material: NOR-PCI-MIO-16-4 (Dev2), BNC-2110 connector

  * OS: Windows XP

  * Version: Labview 8.5

  * Wiring: Two sensors via BNC Dev2/ai0 and Dev2/ai1, BNC to TTL generator PFI0, BNC Dev2/ao0 for material Gain Control

  Intention:

  1 relaxation simultaneously (dev2/ai0 and dev2/ai1) acquisition channels and voltage generation nuer a TTL signal (connected to PFI0)

  2. particularly important to be able to generate a voltage signal decaying off Dev2/ao0 which I use to order a part separated from the material.

  Approach (my VI is attached):

  1. I created the inputs/outputs analog cable channels of entry in the series. Added timingand trigger screws

  2 selected PFI0 as a source of outbreak of AI. Dev2/AI/StartTrigger selected as source of relaxation for AO. Selested Dev2/AI/SampleClock synchronization AO for the synchronization application

  3 used a startup sequence to ensure that GOT it start first

  4. code give the following error message:

  =================================================

  Error 3 occurred in an unidentified location:

  Possible reasons:

  LabVIEW: Internal error. Area of poorly accessed memory.
  =========================
  NOR-488: Controller not properly treated GPIB.

  ==================================================

  Indications as to what I'm doing wrong? Any help is really appreciated as I am on a deadline.

  My instinct is that associates to the reading of Scripture entry output data, but do not know what.

  Thank you very much!

  See you soon,.

  uidahosa,

  This knowledge base article describes your problem.  I didn't specifically see this situation in your code, but the "Okay + warnings" is connected to the [error code] I think that it was probably a misclick.  I'm curious to see what errors you get after that.

• The memory module loses the functionality with the latest version of FFX

  I just upgraded to Version 36, and now the add-on brief (RSS reader) has lost some features. Specifically, the list of all feeds, but when I click on an individual type power or a folder (for example, "computer") to limit the display, the display does not change to reflect my choice. Before Version 36, I could set up a limited vision, but now I can't. I tried to uninstall and reinstall in short, but there is no change in behavior. (I am running Windows 8.1 on a laptop Lenovo G700, if it's relevant.) I checked the list of changes for the next Version of 37, but that doesn't help me - I am not the developer, and I work with Version 36. Anyone have any suggestions on how to solve this problem of the end-user? Thank you.

  Sorry, I only use the module myself.

  There is a brief thread support and your comments here:
  https://forums.Mozilla.org/viewtopic.php?f=23 & t = 14851 & sid = b5c60f6e229eb13ef94020b1c29425b1 & start = 125

  Also, the module based on the reviews of customers here - https://addons.mozilla.org/en-US/firefox/addon/brief/reviews/ - it looks like this is broken in Firefox 36. You can try the channel at the bottom of this page - https://addons.mozilla.org/en-US/firefox/addon/brief/ - development version and see if it works better.

• Satellite A300D PSAH8A replace the memory module

  Hi, everyone, I have a satellite A300D *(PSAH8A-01K00H) has only 2 G of RAM.
  I want to upgrade my RAM to 4 G, but not very well what RAM (I mean DDR2 or DDR3), how fast is compatible with the motherboard)

  Someone can give me some advice or a website to find its material information, would be much appreciated thanks in advance.

  Lee

  Hi mate

  Notebook´s RAM upgrade depends on the chipset.
  Means that you should check the properties of the chipset.

  But as far as I know the laptop must support 4 GB of RAM, and AFAIK you could use DDR2 modules RAM 800 MHz.

  PS: this information must also be placed in the user's manual. Then maybe you should check this too ;)

  Welcome them