Changes in git when creating child classes

Similar Questions

• Private data LVOOP Parent returned when the child instance created from constant

  I created a parent class and child class.  For each of these classes, I created a member who is a builder, whose purpose is to initialize constants for each class and return the instance of the class VI.  I also have an accessor Member VI for each class that returns private data of the class (in this case, a single string for each class).

  Private class data Parent 'String' is set to "text Parent" as default.

  Private data of the class of the child 'Child String' are set to 'Child text' as a default.

  The Parent class constructor works very well.  For testing purposes, I'll be back the text of unbundling of directly the manufacturer VI, as a return of the VI accessor. The Parent constructor starts from a class constant.

  However, in the case the constructor of class as a child, if I start from a class constant, unbundling directly private data (using a feature of unbundling by name and choosing "Child String" as the element), I get the private parent data!

  If I use the Member of the class of the child VI to retrieve the text, I get the private data of the child.

  If I change the constructor from a class of control instead of a constant class, I get the private data of the child.

  This occurs only until the child class has existed as a control flag. that is, if I ungroup private data, after the class is returned by any Member VI, I get the private good child data.  Then, of course, something changes once the class 'data' has been a control at a given time.

  I'm using Labview 8.6.1, Windows XP

  I have attached a small project that demonstrates the problem that I encounter, without actually doing initialization, just read.

  Is this expected behavior?  Why does it matter if I start with a constant of class instead of a control of the class?  When you slide the block diagram in the project window, you will always have a constant.

  Although I was able to reproduce your problem in LabVIEW 8.6.1, it seems to work fine in 2009.  I could not find a CAR ID, but at this point I can only assume that the behavior was not intended but it is set in 2009.

  Let me know if you need me to find more details.

• Substitution of the class, how to create the child class and then the base class

  I started to write a program for a DMM smart, that the problem is all versions of DMM greet the change company communication.

  My idea is to write a child class for each version, DMM and each Subvi child will replace the Subvi base class.

  My problem is, I first want to create a child class and after I see everything is working, start creating the base class. in this way, I'll see if think the right way.

  My question is

  How can I create a child class and then create the base class and configure the Subvi class of the child to be the substitution of the base class?

  I tried searching in the property of the class, but I don't see anything.

  Thank you

  This can be done and I did on occasion.

  You create the base class with the methods of dynamic distribution, you need (Connector components must be identical to those of the class of the child).

  Set then the legacy of the class inherits this base class.  If your method is defined as a dynamic distribution method in the parent, you will probably now have some errors (unless your method of child was already DD, in which case you might be OK already).

  To change the inheritance of a class, right-click on the properties of the class in your project, and then select Properties.  According to me, the tree of estate is at the lower end of the property.  Click on the 'legacy of change' (or something similar) to choose the class from which you now want to inherit.

• Prevent the child class dependency when the conditional use disable to specify the class in the development environment

  Hello

  I develop an application that I want to run on the normal systems and in real time using LabVIEW Proffesional Development System 2012 SP1

  To control how the application interacts with the user, I created a class that defines the type of user interface behavior that should allow me to have nice dialog boxes when the system is running on a machine windows and no dialog box (or any other friendly code in non-real time) if they sail on a real-time target.

  The parent class is the code that suits the actual time and the class of the child is the one with dialog boxes.

  To control the class of which it is responsible, I have a structure conditional disable. It works fine when the application is built in an executable or executable file in real time, but the problem arises when I want to use the code during development on the target in real time.

  I think that with the application under a target in real time (RT PXI), the proper case of the conditional - disable is enabled for the parent class is used, but the child classes are also listed under dependencies - I pressume it's because they exist on the block diagram in the case of persons disabled conditional turn off the diagram.

  This means that I can't deploy the code on the target in real time as it is unhappy with the class of the child code - even if it will never run.

  To save the poster my real project, I created an example with a Parent and child class and a flag to disable conditional 'class' to illustrate the problem.

  If you run Test.vi, you will see that the child class always gets locked (i.e. is addictive) while running even if it is not called.

  So - basically my question is: is what I can do about it or will I enough to disable it with conditionals and simply put the constant to correct class on the block diagram in the tests?

  Thanks in advance

  John.

  I feel your pain.  I came across something similar some time back.

  Apparently official NOR position is that you have to put a conditional structure of Disable IN EVERY ONE OF YOUR CLASS live.  In the Windows screws, you simply have a case of empty disable conditional with the windows code in another case and vice versa on the RT.

  I also much prefer the method you describe...

• How I changed the color of something? OK, so I use to be able to change the color of things, but now I have use color overlay, gradient overlay, or change the color when I first create the form, it turns into another shade of gray instead of chan

  How I changed the color of something? OK, so I use to be able to change the color of things, but now I have use color overlay, gradient overlay, or change the color when I first create the form, it turns into another shade of gray instead of change the color, I chose.

  Three things I can think of:

  Your document must be in RGB mode.

  Layer blending mode should be set to Normal

  Masks are grayscale. If you select the mask, you cannot apply a color.

  Always check your tab at the top to see if what you choose is RGB or grayscale.

  Gene

• How to create a class and a pointer to the Panel

  Hi all

  I'm new to Flex.  I created a dynamic group that has three children, added to it. The three children are Hbox and Vbox or an Hbox. The first Hbox with a label that should be updated every minute. I tried using getChildrenAt and it works and it seems .as Hack I'm doing like getChildrenAt (0) as Hbox, I have more than one group of experts and all the Panel must be updated values. So is it possible. I could create a class and has a pointer on the Panel and a pointer to the label, which will be called every minute and on the change of the label in the front of this update

  Thanks in advance

  Barro

  OK yes I think I understand now look to examples.  First heres my custom panel ELEMENT.

  package

  {

  Import mx.containers.Panel;

  Import mx.controls.Label;

  SerializableAttribute public class MyPanel extends Panel

  {

  private var _labelValue:String

  private var labelSet:Boolean;

  private var myLabel:Label;

  public void MyPanel()

  {

  Super();

  }

  public function set {labelValue(value:String):void}

  _labelValue = value;

  labelSet = true;

  invalidateProperties();

  invalidateSize();

  }

  public function get labelValue (): String {}

  Return _labelValue;

  }

  override protected function createChildren() (): void {}

  super.createChildren ();

  myLabel = new Sun;

  addChild (myLabel);

  }

  override protected function commitProperties (): void {}

  super.commitProperties ();

  If {(labelSet)

  MyLabel.set_Text = _labelValue;

  labelSet = false;

  }

  }

  }

  }

  Pretty basic it creates a tag in the Panel.  Opinion, he still has the labelValue public property which, when set, sets the text in the label.

  Now for the main application

  <>

  "xmlns:MX ="http://www.adobe.com/2006/mxml"

  Layout = "vertical" width = "100%" height = "100%".

  creationComplete = "createPanels ()" > "

  Used to store references to the panels when you create

  private var panelReferences:Array;

  My replacement for xml, but will work the same way.

  private var myData:Array = new Array)

  {panelName: "Group 1"},

  {panelName: "group 2"},

  ({panelName: "Group 3"});

  Look in the table (your XML and create panels

  private function createPanels (): void {}

  panelReferences = new Array();

  Create panesl and add on demand

  for (var i: int = 0; i

  var mPanel:MyPanel = new MyPanel();

  mPanel.labelValue = myData [i] .panelName;

  mPanel.width = 100;

  mPanel.height = 70;

  Add the panels also in the table of references

  panelReferences.push (mPanel);

  addChild (mPanel);

  }

  }

  private function changePanelHandler (): void {}

  Change the label of panels in the panelReferences table.

  Target group by using the index number

  panelReferences [ns.value] .labelValue = newLabel.text;

  }

  ]]>

  It loops through the data in the table that is the source for the panels.  As he does and creates a new Panel, it adds to the application, but also the reference to the panelReferences table.  Now in the demo app every time you want to set the value, you just do it on the reference in the references table and so it's a pointer property labelValue Panel Gets the value, and then updates the text in the Panel.

  I think that this covers what you want.

  With regard to the interfaces.  Tell everyone your signs accepts different types of data (they are all channels) and implemented the data in different ways.  Her you would use one interface.  This would ensure all panels used consistantly Sami methods, but might implement these different ways.

  I hope this helps

  Andrew

• oracle.apps.fnd.framework.OAException: could not create Java class

  oracle.apps.fnd.framework.OAException: could not create Java class: (oracle.apps.pon.forms.jrad.webui.ExtendFormsDynamicJradCO) associated with the area: (ponJradContainerPG). This is probably because the class name is incorrect or not included in the project
  
  
  I expanded the page seeded controller. It was working fine.
  
  But when I made some changes more and yet once deployed on the server. his gicing me the above error. I didn't know where I was wrong.
  
  
  Thanks in advance.

  Hello

  Just check the name of the extended correctly controller and you have set the property category of the region controller.

  Bounce Apache too...

  Thank you
  Gerard

• LVOOP: Common accessor for the child classes?

  I am reletively new to LVOOP and OBJECT oriented programming in general. I used very simple classes as a replacement for clusters several times, and now I have an architecture intended to convert most of my code into classes, dynamic distribution screw and similar.

  However, I run in to an issue, which basically boils down to laziness: I really don't want to do a lot of the same dynamic send screws I want to have a VI parent to be able to write a piece of data common to all children. Preference gives an error if the child does not have this data element.

  I guess it's quite similar to dynamic distribution, but without having to write a DD VI for each class.

  Is it possible to have the VI parent to access the data of the child? If so, how?

  Here is an example of my hierarchy:

  Test.lvclass (parent)

  DC_test.lvlcass (data: test number, 2D, time stampresults)

  Transfer_Curve_test.lvlcass (data: results of tests settings, 1 d, timestamp)

  Breakdown_test.lvlcass (data: test number, 3D, timestampresults)

  ... 28 another test

  As you can see, the data type only common between them is the timestamp. I want to be able to use a VI in the parent class to write data in the child class.

  You have it backwards autour.

  The data that is common belongs to the parent class, not the class of the child.

  Data that are not common may not be processed by the parent class and must be transformed by the child class.

  You don't need to CREATE truly dynamic shipping screws for a common data type.  If you just don't set the VI at all, it will be called the parent instance.

  Shane.

• When creating mail in Windows Mail by using the Contacts file.

  Creating e-mail in Windows Mail I can not access my Contacts folder.  Any reason why it is just stopped working?  Thank you.

  To all,

  I found my own solution and think it can benefit everyone on this thread and others who have access to this thread.

  When creating Mail in Windows Mail, I used to be able to click on to or CC contact icon and be presented with the same entries in my file of Contacts.  All of a sudden, I got a list of contacts "Empty" in the contacts to or CC box.

  To fix this, I closed the function create a message.  I opened my Contacts folder where all my contacts were intact.  I selected all the contacts.  Then right click selections shaded and chose properties.  On the general tab, I did so that the attributes were the unchecked Hidden attribute selected apply and then OK.

  Who did it!  Now I can go to create a message, select the to or CC and present people with equivalent display my Contacts folder icon.  Now, I can click on the recipients and complete the line receiver with my selection!

  I had a problem recently with having lost all my favorites in IE 9.  It was suggested to me via the IE community to ensure that all my contacts have unchecked Hidden attributes.  That solved the problem of favorites so I tried here also.  The IE community attributed these abrupt changes were due to a virus.

  Hope this helps all of you.

• Virtual PC/XP Mode is asking me my name & the password. I think it says XPMUser and wants to answer me with a password. I want to change the name and create a password. I have never created a.

  I have not created anything yet he keeps asking for a password and display name is XPMUser, I believe.  How I can change this option to create a password also.  My file is listed as XPMUser under.   c:/Documents and Settings/XPMUser I have this file.  Who has my name there instead and if so how to change the name and create a password?

  Thank you

  When you install Windows XP Mode, it automatically creates a user named XPMUser account.  If you want to use a different name:

  1. log in as that of XPMUser.
  2. create a new computer administrator account with the name that you want.
  3. close XPMUser.
  4 log in to the new account and create a password.

  You can then remove the XPMUser account if you wish.

• How to create several classes of cascade?

  Goal: Create the button to start and stop the service.

  Situation: One button works.

  However, whenever I click on another button, the button does not work.

  Question: how to create several classes of cascade?

  or something wrong in my code?

  Mini code:

  Calls a CPP QML.

  ApplicationUI::ApplicationUI (bb::cascades:Application * app): QObject (app)

  {
  QmlDocument * qml = QmlDocument::create("asset:///main.qml").parent(this);

  CameraWrapper * wrapper = new CameraWrapper();

  QML-> setContextProperty ('wrapper', wrapper);

  AbstractPane * root = qml->() createRootObject;
  App-> setScene (root);
  }

  And then, QML calls another RPC.

  import bb.cascades 1.0

  {Page}
  {Of container
  layout: {DockLayout}
  }
  Button {}
  text: qsTr ("Start")
  onClicked: {}
  wrapper.startRec ();
  }
  }
  Button {}
  text: qsTr ("Stop")
  onClicked: {}
  wrapper.stopRec ();
  }
  }
  }
  }

  The main CPP:

  #include "cam.hpp".

  using namespace bb::cascades;

  {CameraWrapper::CameraWrapper()}

  int CameraWrapper::startRec() {}

  This button works.

  }

  int CameraWrapper::stopRec() {}

  This button does not work.

  }

  The main.hpp

  Class CameraWrapper: public QObject
  {
  Q_OBJECT
  public:
  CameraWrapper();
  Virtual ~ CameraWrapper() {}

  Q_INVOKABLE
  int startRec();
  int stopRec();
  };

  Thank you for your attention,

  Finally, we use the thread to solve the problem.

  Solution:

  loopWrapper (void * test) {void *}
  CameraWrapper * a = (CameraWrapper *) test;
  a-> startRec();
  return null;
  }

  setFlagWrapper (void * test) {void *}
  CameraWrapper * b = (CameraWrapper *) test;
  b-> setFlagFalse)
  return null;
  }

  void * CameraWrapper::setFlagFalse (void * arg) {}
  exit_application = false;
  fprintf (stderr, "Flag changed to false\n");
  return arg;
  }

  void CameraWrapper::runLoop() {}
  pthread_create (& thread_a, NULL, & loopWrapper, (void *) this);
  }

  void CameraWrapper::runSetFlag() {}
  pthread_create (& thread_b, NULL, & setFlagWrapper, (void *) this);

• Can I fill a new column when creating?

  Example with the employees in the HR schema table

  create table jab in select * from employees;

  change the table JAB Add (fun_test number not null); -> column I want to complete when creating

  Is there a way to do this? I'm assuming that PL/SQL would be a way, but I don't use PL/SQL, now I wonder if I can do this SQL

  One last question... Is it possible to add data to a column that is added to an existing table, adding another source of table data?

  Yes - you use an UPDATE statement and a subquery to update the columns you want.

  Or you can use a DEC statement to create a new table and query the data in the old table and source of all what you need to complete the additional column.

• Profiles of DRM fails when creating EPMA Interface

  Hello

  DRM getting authentication failed when creating profiles of EPMA.

  I tried several times but his failure to get. do I need to do something in DRM. Please some guide.

  Hello

  Please follow him below the steps and, hopefully, this should solve your problem

  1. connect to the DRM application server.

  2. launch the DRM configuration console

  3. click on the Application to change

  4. on the register EPM tab, click the button cancel the registration.

  5. in the identification information section change of user name and password for the correct credentials (as a general rule, the user is epm_admin)

  6. click on the button Save

  7. Enter the credentials of the user CSS (as a general rule, the user is epm_admin)

  8. click on Save Configuration

  9 restart DRM Services

  10. try to create an import profile in EPMA

  Thank you

  ~ KKT ~.

• An error occurred when creating an application

  With the help of EMP 11.1.2.3.

  I want to create a classic application.

  I created the user database with all of the grants.

  I created a data source in EPM.

  When I try to create the application, it returns "an error occurred when creating the application."

  I searched through all the directories of newspapers and can not find a single log file that captures the reason for the failure.

  Last time that this happened, someone said I should check and make sure that all services were running.  I'm not quite sure where to look for this on a Linux machine.

  I don't know where to another to watch, or what else to do.

  Any suggestions would be helpful, because I am relatively new to EMP.

  Thank you.

  Bingo, now, you must run the configurator and check the details of planning for the datasource planning repository. It should point to your R & A schema. If its correct.

  Then, change the details to have your outline plansys and redeploy the application planning both by the configurator. In the end, you will need to reconfigure the web application of the Foundation. so that all the information updated in the registry.

  You can check the location and measures of reference in my post above.

  Hope that solves your problem.

  See you soon!

  SH! going

  PS: If your outline plansys have tables of HSPSYS_, then you will need to select drop and re-create option of the configurator. as the safest stages, you can take backup of plansys.

• How can I create a class to be used on all pages? CS6

  IM using Dreamweaver CS6 to create a mobile application. I have a lot of pages, but I need to keep change the stylesheet and include #pageid .class over and over again. Is it possible to do so as the class works on all pages. Thank you.

  I apologize for my terrible wording, but I discovered that I had to drag my style sheet in the stylesheet that dreamweaver will automatically use to crush it. Thanks in any case.