Profiles of DRM fails when creating EPMA Interface

Similar Questions

• FAILED TO CREATE THE INTERFACE ORACLE DATA INTEGRATOR PROJECT

  Hello
  
  I'm new to ODI & I started to learn by following the links
  
  http://www.Oracle.com/WebFolder/technetwork/tutorials/OBE/FMW/ODI/odi_11g/odi_master_work_repos/odi_master_work_repos.htm
  
  I did creating the repository master & repository work successfully by the following scenario in the link above. Later, I followed the link below
  
  http://www.Oracle.com/WebFolder/technetwork/tutorials/OBE/FMW/ODI/odi_11g/odi_project_ff-to-FF/odi_project_flatfile-to-flatfile.htm
  
  in this scenario, when I'm creating interface, I got two errors
  
  Gravity Message object
  Fatal target target temporary DataStore datastore has no name.
  Critics target DataStore No. IKM is selected for this interface.
  
  But, I chose IKM SQL to ADD the FILES in the tree structure Module knowledge in respect of integration after selecting I click on save and then new open pop-up window and you are prompted for the name of the file by clicking the search icon I have chosen a path, and I gave him the name of file then recorded... After having done that also, I face the same mistakes. So someone please help me to overcome this problem
  
  Thank you
  Gunuru

  Hi Gunuru,

  Problem 1:
  In your interface, go to the mapping tab.
  Click "Target data store" on the top right of your screen and then enter a name for the data (bottom) store.

  Problem 2:
  Your probably forgotten point 4 and point 5 of this article: http://www.oracle.com/webfolder/technetwork/tutorials/obe/fmw/odi/odi_11g/odi_project_ff-to-ff/odi_project_flatfile-to-flatfile.htm#t6

  Just click the workflow tab, click your staging area and choose your IKM.
  You must also choose a LKM on the part of the source.

  It will be useful.

  Kind regards
  JeromeFr

• Shared services registration failing when configuring EPMA 11.1.1.3

  Hi all, I am currently woking on essbase and any knowledge of planning so tried to update my knowledge. I installed epma 11.1.1.3 on workstation to VMware windows 2003 that I have windows 7 laptop. oracle 10g installation created a user/database (epma) patterns (sm, ms) is trying to set up the foundation, essbase, planning and reporting and analysis services. the configuration database and register with shared services has failed. I'm doing something wrong. I followed some configuration documents that are documented with screenshots are still unsure as to what I do. Please advice on how to avoid these failures.
  
  Here are the results of the validation of the configuration.
  
  Thanks in advance.
  Srinivas
  
  Oracle EPM system
  Diagnostic reports
  Generated 03/03/12 23:05
  Running on validation srinivas
  Validation tool Info: 11.1.1.3.0 drop 9-0 build 3129 2009-07-16 13:24
  Name of the operating system: Windows 2003
  Operating system version: 5.2
  
  
  Status Service Test Description duration of test
  Foundation of Hyperion
  A FAILED CFG: Configuration so check all configuration tasks are completed
  Error: The next tasks are not configured:
  relationalStorageConfiguration: Configuration failed
  Recommended action: try to set up the tasks mentioned 0s
  OPN FAILED: OpenLDAP Check if global roles number of not less than 16
  Error: $item.exception.localizedMessage
  Recommended action: 0 s
  OPN FAILED: connection OpenLDAP OpenLDAP
  Error: srinivas:28089
  Recommended action: open Start LDAP 1s
  The ERP Integrator
  CFG PAST: Setup WARNING: some even suggested not configuration tasks completed.
  Check if all configuration tasks have been completed 0 s
  Essbase / customer
  WR PAST: Windows registry check if EQD excel addin registered for Essbase Client 0 s
  Essbase / Essbase
  A FAILED CFG: Configuration so check all configuration tasks are completed
  Error: The next tasks are not configured:
  hubRegistration: Configuration failed
  Recommended action: try to set up the tasks mentioned 0s
  EAS FAILED: Essbase Server start the Essbase server check using the Maxl command
  Error: Result: unable to connect to Essbase server by using the command MAXL. Please check the essbase server is running.
  Recommended action: check Essbase server is started. 2 1
  SVR FAILED: external auditor Essbase Java API launch with the following command: admin C:\Hyperion\common\validation\9.5.0.0\launchEssbaseJavaAPI.bat EssbaseJAPIConnect * http://srinivas:13080/aps/JAPI srinivas
  Error: Result:-1; Error message: unable to connect to the olap service. Unable to connect to the Essbase server at srinivas. Exceeding the timeout to connect to the Essbase Agent/server using the TCP/IP protocol. Check your network connections.
  Recommended action: make sure that the external auditor is working. 7 s
  Essbase / Essbase Administration Services
  A FAILED CFG: Configuration so check all configuration tasks are completed
  Error: The next tasks are not configured:
  hubRegistration: Configuration failed
  Some of the suggested configuration tasks not yet completed.
  Recommended action: try to set up the tasks mentioned 0s
  Essbase / service provider
  A FAILED CFG: Configuration so check all configuration tasks are completed
  Error: The next tasks are not configured:
  hubRegistration: Configuration failed
  Recommended action: try to set up the tasks mentioned 0s
  Essbase / Smart Search
  CFG PAST: checking Configuration if all configuration tasks have been completed 0 s
  Essbase / Studio
  A FAILED CFG: Configuration so check all configuration tasks are completed
  Error: The next tasks are not configured:
  hubRegistration: Configuration failed
  Some of the suggested configuration tasks not yet completed.
  Recommended action: try to set up the tasks mentioned 0s
  Managing the quality of financial data
  CFG PAST: Setup WARNING: some even suggested not configuration tasks completed.
  Check if all configuration tasks have been completed 0 s
  Foundation / calculation Manager
  A FAILED CFG: Configuration so check all configuration tasks are completed
  Error: The next tasks are not configured:
  hubRegistration: Configuration failed
  Some of the suggested configuration tasks not yet completed.
  Recommended action: try to set up the tasks mentioned 0s
  Foundation / Performance Management architect
  A FAILED CFG: Configuration so check all configuration tasks are completed
  Error: The next tasks are not configured:
  hubRegistration: Configuration failed
  Some of the suggested configuration tasks not yet completed.
  Recommended action: try to set up the tasks mentioned 0s
  Foundation / workspace
  A FAILED CFG: Configuration so check all configuration tasks are completed
  Error: The next tasks are not configured:
  hubRegistration: Configuration failed
  Some of the suggested configuration tasks not yet completed.
  Recommended action: try to set up the tasks mentioned 0s
  FROM HTTP: Http is [C:\Hyperion\common\httpServers\Apache\2.0.59\bin\installhyperionapacheservice.err] s 0 empty file
  [FROM HTTP: string check Http [LoadModule jk_module modules/mod_jk] file[C:\Hyperion\common\httpServers\Apache\2.0.59\conf\httpd.conf] 0 s
  PAST REG: Register all links are present in the registry. 2 1
  Performance dashboard
  CFG PAST: Setup WARNING: some even suggested not configuration tasks completed.
  Check if all configuration tasks have been completed 0 s
  Planning
  A FAILED CFG: Configuration so check all configuration tasks are completed
  Error: The next tasks are not configured:
  hubRegistration: Configuration failed
  applicationServerDeployment: Configuration failed
  Some of the suggested configuration tasks not yet completed.
  Recommended action: try to set up the tasks mentioned 0s
  Profitability and cost management
  CFG PAST: Setup WARNING: some even suggested not configuration tasks completed.
  Check if all configuration tasks have been completed 0 s
  Strategic Finance
  CFG PAST: Setup WARNING: some even suggested not configuration tasks completed.
  Check if all configuration tasks have been completed 0 s
  Financial management
  CFG PAST: Setup WARNING: some even suggested not configuration tasks completed.
  Check if all configuration tasks have been completed 0 s
  Reporting and analysis
  CFG PAST: checking Configuration if all configuration tasks have been completed 0 s
  SVR FAILED: external auditor Essbase Java API launch with the following command: admin C:\Hyperion\common\validation\9.5.0.0\launchEssbaseJavaAPI.bat EssbaseJAPIConnect * http://srinivas:13080/aps/JAPI srinivas
  Error: Result:-1; Error message: unable to connect to the olap service. Unable to connect to the Essbase server at srinivas. Exceeding the timeout to connect to the Essbase Agent/server using the TCP/IP protocol. Check your network connections.
  Recommended action: make sure that the external auditor is working. 1 1
  
  Test start time: 23:05:18
  End of test time: 23:05:40
  Test duration: 21s

  Hi Srinivas,

  I suggest you to do separately from the configuration of the different components. First you configure shared services and continue with the other components.
  And also using the same relational database for all components is not recommended.
  Doing so will make you empty the things about it you give and would be easy to fix too.
  And I'm sckeptic on your database connection.

  Few things to check before you start the configuration.
  1. check are you can connect to the database on firewall problems.
  2 and also check the timeout values defined for the database.

  Kind regards
  Pradeep

• The user profile Service Service failed when connecting: Windows 7, SBS2011

  Hello

  I've been looking for an answer for the last day and hoping someone can point me in the right direction. I've seen many posts on this problem, but none of them seem to be the same as the situation that I am, if I missed an I'm sorry.
  We have just installed 4 PC with W7 (previous W7 machines there have been no problems) when I try to log on to the domain with one account other than admin I get the message
  "The Service user profile Service does not logon, user profile can not be added"
  These are brand new machines and have not been connected with any account other than the administrator, so there is no .bak in the registry file, etc.
  I checked the accounts by logging in on another pc of W7 'ok' and that's fine.
  Thanks in advance for any help / advice
  Ronnie01

  Hello

  Thank you for contacting Microsoft Community.

  First of all, connect the PC to the workgroup, configure the user account, restart it and try to connect back to the field.

  Response if the issue is not resolved.

• Download image failed when create image asset

  I use JSK, run on Tomcat, whenever I try to create Active Image and download an image file, I get error "Upload failed" and there is not much information for me except for debugging, everyone has seen the same error? Thank you

  Sometimes I see the root cause of the problem today by simply changing the Web browser, my previous Firefox is too old, if you are using Firefox version 22, uploaded file will be fine

  -Liang Yi

• User profile service: when I click on my user profile, I get the following error messages: the user profile service service failed to connect. User profile cannot be loaded.

  When I click on my user profile, I get the following error messages: the user profile service service failed to connect. User profile cannot be loaded.

  Isn't that one profile, the administrator and another account are ok

  ·                        Restore point:

  Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

  Try a restore of the system once, to choose a Restore Point prior to your problem...

  Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.
  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  If the above does not work:

  ·                        http://www.Vistax64.com/tutorials/130095-user-profile-service-failed-logon-user-profile-cannot-loaded.html

  See if the information in the above tutorial will help you.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  http://support.Microsoft.com/kb/947215#letmefixit

  Error message when you log a computer Windows Vista-based or Windows 7 by using a temporary profile: "the user profile Service has no logon. Unable to load the user profile.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  http://windowshelp.Microsoft.com/Windows/en-AU/help/769495bf-035C-4764-A538-c9b05c22001e1033.mspx

  Difficulty of a corrupted user profile

  After creating the profile, you can copy the files from the existing profile. You must have at least three user accounts on the computer to perform these operations, including the new account that you created.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  http://support.Microsoft.com/kb/947242

  A temporary profile is loaded after you connect to a Windows Vista-based system

  See you soon.

  Mick Murphy - Microsoft partner

• DRM-61026: cannot create the session of the user for the following reason: the connection has failed. User name or password.

  Im very new to Oracle DRM and Im trying to get the configuration of the application on the Windows Server that is running SQL Server 2008.  When I try to connect to the Web Client I get this error.

  DRM-61026: cannot create the session of the user for the following reason: the connection has failed. User name or password.

  Can you please help

  The problem is solved, reinstalled DRM and recreated the repository. the password has a symbol that causes the problem, @.

• Error when you open Add or remove programs: "failed to create value" At Line 451 how this can be corrected?

  Once all updates completed, I now can't add remove programs to work.

  I get the following in a box error message: "failed to create value"at line 451.

  Someone knows how to fix this?

  Hi ZebWebb,

  1. What service pack is installed on the computer?
  2. You have security software installed on the computer?

  If you have recently installed Windows XP SP1 on the computer, then see the article and check if that helps.

  Error when you open Add or remove programs: ' failed 'at line 410' of value creation.

  http://support.Microsoft.com/?kbid=823768

  If you have not installed Service Pack 1 of Windows XP on the computer recently then check if the problem persists in the safe mode and after return details.

  A description of the options to start in Windows XP Mode

  http://support.Microsoft.com/kb/315222

• When you try to install PDF Creator, I get an error message: "error 5 - failed to create the directory, access is denied."

  access denied for the creation of a directory

  When you try to install PDF Creator, I get an error message: "error 5 - failed to create the directory, access is denied."  How can I fix this?

  When you try to install PDF Creator, I get an error message: "error 5 - failed to create the directory, access is denied."  How can I fix this?

  Only when you try to install this application?

  What about BullZIP PDF Printer?

  (You can uninstall - trying to figure out if it's a problem of Windows or the question of enforcement.)

• "When I tried to sign on the computer, I get the following message: the user profile service service failed connection, failed to load the user profile.

  "Whenever I tried to sign up with my password to connect, do the following: the user profile service service failed connection, failed to load the user profile" when I click OK, it disconnects... Help, please

  Go to Safe Mode and do a system restore. See the link below:

  The user profile Service has not logon. User profile cannot be loaded
  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-security/the-user-profile-service-failed-the-logon-user/995955f8-d9d4-4148-840D-c896c3be78b8

  Follow the links on the post.

• Failed to create the required registry key: vmware, Inc. error: 2 when installing the vm 7 wareinwin and the installation of any software of a few errors in registry pls help...

  Failed to create the required registry key: vmware, Inc. error: 2 when installing the vm 7 wareinwin and the installation of any software of a few errors in registry pls help...

  Hello mnaveen.kumar,

  Search the registry to see if this key was created. Sometimes, the installation program does not have permission to this key.

  HKEY_LOCAL_MACHINE\SOFTWARE\VMware, Inc.

  You can try to manually create the key to see if this will help.

  Please reply back and let us know if this can help.

  Sincerely,

  Marilyn
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• My Readyboost does not work. When I click on dedicate to Readyboost, it gives me an error: failed to create the cache.

  ReadyBoost - Cache problem!

  My Readyboost does not work.  When I click on dedicate to Readyboost, it gives me an error: failed to create the cache.  The process cannot access the file because it is being used by another process.  Help!

  Hello

  Did you change your computer?

  (a) click on the 'Start' button, then click on 'computer '.

  (b) right click on the USB drive or flash memory card that uses Windows Ready Boost, then click 'properties '.

  (c) click on the tab "Ready Boost" in the 'Properties' window to the memory card or the USB drive.

  (d) select the title radio button "do not use this device ' then click on 'OK '. This step should remove automatically the Ready Boost cache on the device. If you are unable to use the full capacity of the device, proceed to the next step.

  (e) double-click the memory card or the USB drive.

  (f) right click on the file 'ReadyBoost.sfcache' and then click 'remove '.

  (g) click 'Yes' to remove the ReadyBoost cache.

  Reconnect the device ready boost which allows the service to boost loan which will create the new cache.

  I suggest you to follow the links and check out them.

  Check your hard drive for errors

  http://Windows.Microsoft.com/en-us/Windows-Vista/check-your-hard-disk-for-errors

  Turn ReadyBoost on or off for a storage device

  http://Windows.Microsoft.com/en-us/Windows7/turn-ReadyBoost-on-or-off-for-a-storage-device

  Using memory in your storage device to speed up your computer

  http://Windows.Microsoft.com/en-us/Windows7/using-memory-in-your-storage-device-to-speed-up-your-computer

• Invalid API Interface name when creating Integrator

  Trying to create an interface to an integrator.  Choose the Type of Interface: API - procedure.  I put in the name of the package and hit and name of the procedure request and obtain the following error.  "Invalid API Interface name."  Any ideas on what is wrong?  I have to save the procedure somewhere first when you use a table for the interface?  If yes where?

  A workaround for your configuration might be to create a wrapper package in applications just to capture settings and then pass them to the package on your custom schema.

• Can I create a Dataform in EPMA interface

  Hi all
  
  I'm new to hyprion epma app. I want to create a dataform in epma.
  
  Is it possible to create a dataform in epma interface or I need to create in the workspace?
  
  Thank you

  Hello

  Forms are designed in planning, so you need to access the planning application directly or through the workspace, EPMA is more for the management of hierarchies.

  Ok?

  See you soon

  John
  http://John-Goodwin.blogspot.com/

• I downloaded a game on games of freeride and when I push play for free he says failed to create the Direct3D device

  My grandson got to my computer and I don't know what he was doing. Some of my games, etc no longer work. I don't know if the things were deleted which are supposed to work or not. HES 8, so you can imagine what can happen. Thank you very much, your all so wonderful here. Nadine

  Hello

  I suggest that you follow these steps and check if the problem persists.

  Step 1:

  Start your computer in a clean boot and check if the problem still persists. Link below will help you to start the computer in clean boot: http://support.microsoft.com/kb/929135

  If the problem does not persist, you can continue with step 2 from the link above.

  Make sure that you reset the computer in normal mode in step 7 after the troubleshooting steps.
  

  Step 2:

  If the problem persists, Uninstall and reinstall the game and check.

  You can also follow the procedure suggested by Rayellis in this link and check if the problem persists

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_other-gaming/critical-error-failed-to-create-DirectX-device/a2061d79-eec4-4363-bc65-83fb1b0adb12