Virtual PC/XP Mode is asking me my name & the password. I think it says XPMUser and wants to answer me with a password. I want to change the name and create a password. I have never created a.

Similar Questions

• My computer lag / freezes for a few seconds then starts to work again and get pop ups, I have never before.

  For example, while I am typing my computer freezes for a few seconds and I can't type or will not move the mouse. This lasts a few seconds but then starts to work again ok. This happens on every 10 minutes or so... enough to get on my nerves, especially at the time of the school. How can I fix? I also get a pop-up whenever I go to a new page. How can I stop this as well? I'd be so grateful for any help on this matter.

  Thanks, Elsie

  Hello

  What the popup say or lead?

  Search for malware, and then run the cleaning as described below.

  --------------------------------------------------------------------------

  If you need search malware here's my recommendations - they will allow you to
  scrutiny and the withdrawal without ending up with a load of spyware programs running
  resident who can cause as many questions as the malware and may be more difficult to detect as the
  cause.

  No one program cannot be used to detect and remove any malware. Added that often easy
  to detect malicious software often comes with a much harder to detect and remove the payload. Then
  its best to be thorough than paying the high price later now too. Check with them to one
  extreme overkill point and then run the cleaning only when you are sure that the system is clean.

  It can be made repeatedly in Mode safe - F8 tap that you start, however, you must also run
  the regular windows when you can.

  Download malwarebytes and scan with it, run MRT and add Prevx to be sure that he is gone.
  (If Rootkits run UnHackMe)

  Download - SAVE - go to where you put it-right on - click RUN AS ADMIN

  Malwarebytes - free
  http://www.Malwarebytes.org/

  Run the malware removal tool from Microsoft

  Start - type in the search box-> find MRT top - right on - click RUN AS ADMIN.

  You should get this tool and its updates via Windows updates - if necessary, you can
  Download it here.

  Download - SAVE - go to where you put it-right on - click RUN AS ADMIN
  (Then run MRT as shown above.)

  Microsoft Malicious - 32-bit removal tool
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=AD724AE0-E72D-4F54-9AB3-75B8EB148356&displaylang=en

  Microsoft Malicious removal tool - 64 bit
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=585D2BDE-367F-495e-94E7-6349F4EFFC74&displaylang=en

  also install Prevx to be sure that it is all gone.

  Download - SAVE - go to where you put it-right on - click RUN AS ADMIN

  Prevx - Home - free - small, fast, exceptional CLOUD protection, working with others
  security programs. It is a single scanner, VERY EFFICIENT, if it finds something to come back
  here or use Google to see how to remove.
  http://www.prevx.com/   <-->
  http://info.prevx.com/downloadcsi.asp  <-->

  Choice of PCmag editor - Prevx-
  http://www.PCMag.com/Article2/0, 2817,2346862,00.asp

  Try the demo version of Hitman Pro:

  Hitman Pro is a second scanner reviews, designed to save your computer from malicious software
  (viruses, Trojans, rootkits, etc.). who infected your computer despite safe
  what you have done (such as antivirus, firewall, etc.).
  http://www.SurfRight.nl/en/hitmanpro

  --------------------------------------------------------

  If necessary here are some free online scanners to help the

  http://www.eset.com/onlinescan/

  New Vista and Windows 7 version
  http://OneCare.live.com/site/en-us/Center/whatsnew.htm

  Original version
  http://OneCare.live.com/site/en-us/default.htm

  http://www.Kaspersky.com/virusscanner

  Other tests free online
  http://www.Google.com/search?hl=en&source=HP&q=antivirus+free+online+scan&AQ=f&OQ=&AQI=G1

  --------------------------------------------------------

  After the removal of malicious programs:

  Also follow these steps for the General corruption of cleaning and repair/replace damaged/missing
  system files.

  Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to fix the system files of Windows 7 with the System File Checker
  http://www.SevenForums.com/tutorials/1538-SFC-SCANNOW-Command-System-File-Checker.html

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Also run CheckDisk, so we cannot exclude as much as possible of the corruption.

  How to run check disk in Windows 7
  http://www.SevenForums.com/tutorials/433-disk-check.html

  -----------------------------------------------------------------------

  If we find Rootkits use this thread and other suggestions. (Run UnHackMe)

  http://social.answers.Microsoft.com/forums/en-us/InternetExplorer/thread/a8f665f0-C793-441A-a5b9-54b7e1e7a5a4/

  ======================================

  If necessary AFTER THAT you are sure that the machine is clean of any malware.

  How to do a repair installation to repair Windows 7
  http://www.SevenForums.com/tutorials/3413-repair-install.html

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• Satellite Pro A100 request BIOS password which was never put

  Hiya

  Have had my Satellite Pro A100 for almost 2 years and that all this time have never even heard of a password system, but all of a sudden, I turned on the laptop this morning and it does not load. I tried pressing F12 (can't remember why, it seemed the thing to do to read the instructions at the bottom of the screen), but nothing happened so I just turned off the power. Put on again, he asked the system password. (A black screen with a blue box, with the old text base BACK type fonts).

  I have no idea what it could be, I tried the word system and tried just pressing on enter without text in there but it says incorrect password. I removed the battery and left 10 hours but put it back in the machine there is no difference, it will not always go through this screen.

  I am the only user on this machine, have no idea what caused it. I am aware of security, have installed on complete McAfee AV and did not have anything odd happen at all. Didn't last changes made to the configuration, no new software etc. so I have no idea what prompted it.

  Can anyone help please?

  Thanks in advance
  Rachel

  This password seems to be a BIOS password, but I have no idea why this password is displayed if you have never defined it.
  Unfortunately, there is not a lot to see the BIOS password can be removed without the help of an ASP.

  Then, contact the service provider allowed in your country and request removal of the password.

  I also recommend updating the BIOS after the technician removed the password.

  Do you know how to find the ASP closest?

  Here is a site with all FSA worldwide:
  http://EU.computers.Toshiba-Europe.com/-> support download &-> find an authorized service provider

  See you soon

• XP drivers for Virtual PC - beta mode XP de Windows 7 RC necessary?

  Is it necessary to install drivers XP for Virtual PC - beta mode XP de Windows 7 RC? Or is it enough to install the drivers for Windows 7 RC only? Also, can I connect to the internet using the XP mode beta as I can simultaneously access Internet beta mode Windows 7 RC and XP?

  Basically, it will work like that.

  When you download Virtual PC (XP mode), you will need to install the current Windows XP in Virtual PC as if it were another computer. As if you were running the program under Windows 7, XP mode will give you 'seemless' support. (in reality, Virtual PC will run it), but don't look or act like him. So, as you install Windows XP, you need to install the Windows XP drivers in Windows XP.

  I hope that answers your question.

• I get the thing "Call us overprotective", but where it says 'where do we send your code' is coming with an e-mail address, I have never seen/used

  I tried to access my account email for weeks, but it is always with the thing "call us overprotective." I tried to get them to send me the code, but the email address, it will send that is same as iv email address never seen/used/heard about in my life. I have very important emails on my account and I need to access it, but have no idea how to... someone help me? It also won't let me go on my Skype and continues to appear with the same thing.

  Since you have never heard of this address and you have never seen him, I would go here immediately point out that someone has hacked your account.

  • "Report that someone else is using my account.

• I have Adobe Acrobat Reader DC on my computer.  I have NEVER had bad to open a document from this location before.  All of a sudden, I wonder a password.  I went in and created a password, but it won't work when I try to open only th

  I have Adobe Acrobat Reader DC on my computer.  I have NEVER had trouble opening a document from this location before.  All of a sudden, I wonder a PASSWORD.  I went and created a password, but it does NOT work when I try to open certain documents only three 3 in Player-all OTHER documents are open without asking for a password.   I tried to reset the password and tried again to open these particular documents.  They are still not open!

  Then I "chatted" with ADOBE and they me logged onto the Forum and told me to look for an answer I was ANable to automatically find...

  What is everyone out there knows what I need to do to obtain a PASSWORD THAT WILL WORK when I try to open these 3 documents?

  ALSO, what is the URL of the FORUM ADOBE?

  Thank you VERY MUCH to anyone who can help me.  I have urgently NEED to see these documents today, 18/05/15.  Thanks again!

  This isn't true at all. In fact, the specific problem of this user has been resolved when they discovered that someone has added a password security policy to their files. See: How to get and use a password that works to open several documents in Adobe Acrobat Reader DC?

  If you add the password to your files yourself and then forgotten, then there is nothing that can be done using Adobe software, however.

  This can be done with Adobe Reader but is not able to apply (or remove) a security strategy for PDF files.

• password protection is activated when combining files yet I have never created a password.

  password protection is activated when combining files yet I have never created a password.

  You can combine the PDF in a portfolio.

• Cannot connect on Windows, asking a password that has never been

  I never wanted a password in my PC.  Starting this week, I have a password that I never ask. Now, I can't do anything in the PC without the password I've ever had.  This is the case, try to get the icon of ESPN.  Microsoft Windows asks a password now in order to do the things I've done without it.  I can't stop my PC because it asks for a password when he wakes.  The Colombian who responded (paid) could not fix it and I'm stuck with it.  Need to take it to someone who really knows how to clean all passwords unless you help me...

  Hi Lourdes,

  Thanks for posting your query to the Microsoft community. Sorry for the delay in responding. What version of the Windows operating system is installed? It's Windows Vista, Windows 7, 8, 8.1, or Windows 10? How many accounts user are there in the computer? What was any recent change in hardware or software on the computer?

  Please take a look at this article which provides information about Microsoft password policy.
  Microsoft's strategy concerning lost or forgotten passwords

  You can also have a look at this article.
  What to do if you forget your Windows password

  Thank you.

• My office has just done a repair XP after a hardware change and now all user accounts have disappeared and he asks the administrator password when connecting!

  We have a unique system of Windows XP that run the software of engineering for certain calculations. All other systems running Windows 7, but what a XP system because it's the only thing that our calculations software runs on.

  CPU of the XP computer died on us and we had to replace the card mother and CPU. After the change of equipment, following Microsoft's OWN guide on the running an XP repair, we ran the system repair and got all the way to the login screen (no blue screen not as before repair). However, none of the accounts are there and he asks an administrators password. The system has NEVER had a password to our knowledge, it was built in the House, and all simply by clicking on the Administrative login asks for a password.

  What can we do? We needed this fix before today and wait for the repair of the system to do. Is it possible to enter the system to run the software? We tried the SafeMode (all forms) and they all will ask a password after Windows loading.

  It's so frustrating.

  (PS I have been building computers for nearly 15 years and have never had this happen)

  Thanks for the quick response. I looked into the system with a "start-up" program All original profiles seem to still be there. I don't know how to make them appear well. Can you direct me or tell me, how to make profiles see the place?

  The biggest problem, outdoors is not be able to sign more, is that the engineering calculation software is locked to this PC. It can be installed anywhere else without having to pay for a VERY new (I think that thousands of dollars) expensive key or a new version of the software.

  :(

  Yes, it's a problem.
  I believe you can use a UBCD4Win CD or Hiren Boot CD to locate and right click on the files you want to change. And then, if you properly in your repair facility, you change the attributes after you're done.
  Some guides are better than others. And here's one that I like:
  http://www.windowsxpprofessional.WindowsReinstall.com/indexrepairguides.htm
  If necessary, hire a PC Tech. It's much cheaper than buying a license that is thousands of dollars!

• Windows 7 professional asks for a password when I never put one in place, so I can't get past the login screen.

  I have Windows 7 Professional installed on our desktop computer.  I've never set up a user account password when I installed last month, while I wouldn't not to remember it when I log in to Windows.  Last night, I rebooted the computer, but now Windows stops on the user account login screen and asks for a password.  He has never done this before, and I've never set up a password, so I have no idea what to do?  I can't get past this screen without a password.  I have very important files, I already put on this computer, and I need to be able to access quickly.  I don't have a password reset disk, as I've never set up a password first.  Why is this happen, and how can I'm get past this so I can access my files on my computer?  Please help in any way, you can, as soon as possible, please.  Thank you!

  Hi Marco,.

  You may need to contact a local technician to back up your data and then ask them to follow the steps on how to back up your files and restore your computer through this link: back up and restore your PC.

  In this way, you won't lose important any file from your computer.

  Let us know if you have any further questions.

  Kind regards.

• have forgotten the administrative password and the need to create a new

  have forgotten the administrative password and the need to create a new, but without knowing an old failed to create a new

  your options are explained here

  Change or reset the password of a user account from OS X - Apple support

• I have two accounts in Apple Mail. Mailed to some documents from one to the other. When I received the email, it had been sent to about 30 people from my Contacts. How could it happen? I have never create a distribution list.

  I have two accounts in Apple Mail. Mailed to some documents from one to the other. When I received the email, it had been sent to about 30 people from my Contacts. How could it happen? I have never create a distribution list. MBP OS 10.11.4

  Open the "sent" folder on the account that you mailed to and look at the message that you sent it to see.

  You have email of the accident to a group? You have a group created in the application of Contact with these names? Or maybe that you click on reply to all to create the message?

• my phone asking me always Apple ID password of the account that I did not create. I have this account in my settings, but I don't know how to remove it. Thanks for the reply.

  my phone asking me always Apple ID password of the account that I did not create. I have this account in my settings, but I don't know how to remove it. Thanks for the reply.

  There are several places an identifier Apple is used on an iPhone.

  • If it's the Apple of a former owner of the phone ID, and it is in settings/iCloud grace to find my iPhone activated, ONLY the person who set up the Apple ID can remove (see: find my iPhone Activation Lock: a mechanism of extraction of the previous owner)
  • If it's the Apple ID in Settings/iTunes & App Store just log out, then log back with the correct ID of Apple.
  • Do the same for iMessage and Facetime, if that is where the Apple ID is used.
  • If he is asked during the updating of the apps means that applications have been purchased or downloaded using this code from Apple. To resolve this issue, you must remove the application, and then buy with your Apple ID.

• my computer is asking the NETWORK password but I never created a

  My computer is asking the NETWORK password but I never created one, more I can't even password to administor, where it comes from and how it solve.

  Hi HarryNicholson,

  ·         Are you the administrator?

  ·         You did it last changes before the show?

  I suggest you follow the article below and check if it helps.

  How to use system restore to log on Windows 7 or Windows Vista when you lose access to an account

  http://support.Microsoft.com/kb/940765

• When windows asks me to isnert a password recovery disk, it does not offer the possibility to create one in the D drive, where I have a DVD. Why?

  I have a new Dell XPS with Windows 7 Home computer. I want to create a password recovery disk. I have (1) check my CD/DVD drive works (2), I watched the video on how to create a password reset disk (3) I did the procedure successfully in the past on other computers (4) I rebooted the computer after having difficulty finding the opportunity to insert a disk in drive D, the name of the drive for my DVD / CD player. What is the problem?

  The problem is that when I am asked to insert a disc in the player I'd give myself a choice is not drive D, the name of the drive to my CD/DVD drive.
  So over and over again once I wonder to insert the disc. I also have one of these drives you can put 4 holders memory size different from the type used in cameras and I have a DVD player, it is called D drive.  Why I'm not given the option to use drive D when I'm given a choice I can insert a disc so that the password recovery disk can be created?

  Change the assignment of drive letter for the dvd player to one letter other than.

  1. sign the computer as an administrator.

  2. Insert a disk in the removable drive.

  3. type computer management in the start search box and press ENTER.

  4. click on disk management.

  5 right-click the partition, logical drive or volume that you want to change and then clickchange drive letter and paths.

  6. click on the removable drive, click it, clickchange, click the drive letter that you want to use, and then clickOK.