Changes of relative path to absolute path when creating a child of the model
Hello
I found very useful model Dreamweaver features and was doing well until I created a child by selecting the Site template and the template file in the new Document dialog box to discover the following problem:
In the template file, a path appears as follows:
"" < link rel = "stylesheet" type = "text/css" href = ".. /.. / common/css/all.css">
However, in the case of the child, the same path has changed to the following:
"< link rel ="stylesheet"type =" text/css" href="file:///D|/xampp/htdocs/xyz.com/common/css/all.css ">
I want to retain the same relative path in the child's file. Please advise me how it can be maintained.
Thanks as always,
EAD
In the template file, a path appears as follows:
" href =".. /.. / common/css/all.css '> '.
It is not possible for a link appears like this in your model. This is because the template MUST be in the templates folder, which is at the root of the site. A single deep folder level, it is only possible to go UP one level to look for any other file/folder in the site. But your link says to go up TWO levels! Something wrong here. Is your template in the Templates folder? Is - this folder at the root of the site?
Furthermore, Ben's response is quite accurate. Given that DW does not know when your page of the child should be registered, it cannot create the link until it is saved.
Tags: Dreamweaver
Similar Questions
-
Error when creating new record in the jspx page.
Hello! I have error when you try to post the new record in the jspx page (see: http://my.jetscreenshot.com/2677/20100820-oo8z-19kb)
DB I trigger and in the EO primary key attribute I Type set to DBSequence.
Where is the problem and what to do?
Best regards, Debuger@Sireesha excellent point!
@Debugger the reason why you get the error, it is you're missing an af:convertNumber, however, as said Jean Lou, why even put a DBSequence field on your screen?
John
-
Add all files in the path when creating file folio in Folio Builder
Hello everyone.
I'm using InDesign CS 5 and the creation of folio for iPad 2. My Folio builder was working fine until last week, but all of a sudden I see a change in the way it behaves. When I update the files in the Folio Builder, it adds all the files in the path of access (not only the links in the file), including source of PSD files and other related files that I have never used in InDesign, do folio file will increase in size. Can someone help me please how do I remedy this situation?
I thank you very much in advance.
I look forward to your solution.
You have an HTML file in there? If so, put it (as well as its assets) in its own folder.
Bob
-
How to do not include the path when creating pdf of many html files?
I use "merge into one file" to create a PDF from many html files. However, the generated pdf file have html files path information. I wonder how to generate a pdf file without path information.
Go to CREATE > create a PDF file of the Web Page > click the SETTINGS button in the dialog box that follows > uncheck "place headers and footers on the new page.
Thank you!
-
Example of the summary comment
Yes, the update to Acrobat 11.0.09 taken care of him. Thank you!
-
Original title: getting the error while creating a new partition
here to create a new partition get the error "the operation you selected will convert the disc selected basic to dynamic disk... etc" Please help.
I would like to join the screenshot of the error, how?
Hello
1 have had any changes made on the computer before the show?
2. how many partitions are there currently on the computer?
3. how many hard disks on the computer do you use?
4. when exactly you get the error message?
I suggest you refer to the article and try to follow the steps and check if you are able to create a partition:
Create a new Partition on a hard disk in Windows 7
http://TechNet.Microsoft.com/en-us/magazine/gg309170.aspx
I also suggest you the link and attach a screenshot of the screen.
-
Two weeks ago I have upgraded to Adobe Acrobat Pro since Acrobat Pro XI DC. Create a PDF from Clipboard in appearance from a status bar results, lessons for 25%, at which point Acrobat "freezes" "." " Similarly, when using the feature to create a file PDF in Microsoft Word 2016, a progress bar appears, gets to 25%, then the error message "Microsoft Word has stopped working", restart Word, and a message recommending that the Acrobat Add-in is disabled. I'm on Windows x 64 on a Lenovo X 1 carbon 10. Is there a "fix" to these questions?
The word problem seems more likely to have a bug introduced by Microsoft in their last update for Word 2016, a couple of weeks. Someone posted a way to get Word to revert to a version:
To revert to a version earlier office 2013 or 2016 Office in the form of installation of Office 365, you must use a command line and specify the build number, that you want to return.
- As Office 365 facilities are automatically updated in the background, you must disable the automatic updates first. This can be done in any application Office 365 via:
File-> Office account-> Update Options-> disable updates - Open a command prompt:
- Start-> type:
cmd
- Click on: command prompt
- Choose: Run as administrator
- Provide your credentials to the administrator or to confirm the user account control dialog box when you are prompted.
- Start-> type:
- Type the command below that applies to your version of Office or Windows
- Office 2016
cd %programfiles%\Common Files\Microsoft Shared\ClickToRun\
- 2013 office under Windows 32-bit
cd %programfiles%\Microsoft Office 15\ClientX86\
- 2013 desktop on 64-bit Windows
cd %programfiles%\Microsoft Office 15\ClientX64\
- Office 2016
- You can specify the number of bed to regain in the following way:
officec2rclient.exe /update user updatetoversion=
- Replace
with the build number that you want to return. There is a preview of version numbers, you can return to the Office 2013 and 2016 Office. - Example to return to the release of January 2016 office:
OfficeC2RClient.exe /update user updatetoversion=16.0.6366.2062
- Example to return to the release of January 2013 office:
OfficeC2RClient.exe /update user updatetoversion=15.0.4787.1002
- Replace
- As Office 365 facilities are automatically updated in the background, you must disable the automatic updates first. This can be done in any application Office 365 via:
-
Error when creating a folder in the business district
Hi all
I am trying to create a folder in a business using View.It district gives me the following error.
View contains no items, the file will not be created.
Can I know the reason why it generates this error?
There are elements in EUL and I also checked in the backend as well.
Thanks in advance
KiranHello
Well, it could be that there are special characters used in the column name or that the user has all privileges to the display.
If you connect to SQLplus with the same user can DESCRIBE the view? All columns appear correctly?
Rod West
-
How to create a shortcut with relative path
Hi all
I'm a Linux user, so I don't have enough experience to solve this problem.
How can I create a shortcut with relative path?
Usually it is easy to create a shortcut with the absolute path for example:
Windows accepts shortcut path with absolute c:\bin\app.exe, but he does not accept the following relative path:
.\bin\app.exeHi mbnoimi,.
Thank you for using the Microsoft Answers Forums!
To make a shortcut path parent here is a simple solution. Create a shortcut to cmd.exe running the start command to open the current directory. Then set the MDC in the
The shortcut properties.Follow these steps:
Make a new shortcut to: cmd.exe /c start.
Now, right-click on it and get the properties of the shortcut (shortcut tab).
The shortened full path must have been set to this:
%windir%\system32\CMD.exe /c start.Set the directory to "start in" (i.e. DLG) to be a relative path:
(Example for a shortcut on the desktop)
...\SendToClick on "change icon...". "and set" look for icons in this. "
"file:" to:
%SystemRoot%\system32\shell32.dlland press ENTER. Standard folder icon will probably be in the
bottom right.Now you can copy this file and simply change the "start in:" directory
to book new related shortcuts.NOTE: The steps above are just an example so try this at your own risk. And check if it works.
Hope this information was useful.
Let me know if it worked.
All the best!
Thank you and best regards,
R uma - Microsoft technical support.
Visit our Microsoft answers feedback Forum and let us know what you think.
-
Urgent: how to create a shortcut with a relative path?
I put a set of files and folders nested on a server on a network location. (Use of office machines Vista; I don't know that the server is running. The files are a text file and two Office 2007 files). Users will copy this set-up files on their computer (there is a program of VBA macro in a Word document, they need). They need tomorrow (Friday) and the shortcut path gives me fits!
The hierarchy looks like:
MainDir
File.txt
SubDir1
Shortcut to the Word file
SubDir2
Word file
Excel fileI don't think even the paths associated with the shortcut until I looked a little deeper. Because I put all the files and folders together on my computer, when I did a drag - move in the folder on the server, the target properties and start in the shortcut always pointed at my computer! So now, I'm afraid that a user copy this on their machine will have a shortcut that points to ~ my ~ computer, instead of the file on their computer.
I deleted the shortcut located on the server and creates a new one from the Word file in the directory on the server. Better - I think - but it still points to the location of the server. And it is even more likely that, when the user opens the shortcut, it will try to open the file on the server, vice the file on their computer.
How can I create a shortcut to this Word file that will pick up the relative path from around where to reside? I can just click > properties and change the target and start in paths? Or do I need a VBScript or VBA?
I have to get this done fast! A kick - in the right direction is greatly appreciated.
Ed
Hi Ed,
It is not possible to create a shortcut with a relative path.
You can try the following allows to bypass and check if it helps:
Create a shortcut to cmd.exe running the start command to open the current directory. Then set the MDC in the
The shortcut properties.
a. make a new shortcut to: cmd.exe /c start.
b. now right-click on it and get the properties of the shortcut (shortcut tab).
c. the shortened full path must have been set to this:
%windir%\system32\CMD.exe /c start.
d. set the directory of "start in" (i.e. DLG) to be a relative path:
(Example for a shortcut on the desktop)
...\SendTo
e. click on "change icon...". "and set" look for icons in this file: "to: %SystemRoot%\system32\SHELL32.dll and press ENTER.
Standard folder icon will probably be in the lower right.
f. now you can copy this file and simply change the "start in:" to make new related shortcuts directory.
NOTE: The above steps are just an example, so try this at your own risk. And check if it works.
You can also read the following article and check:
Folder redirection fails when you specify the mapped network drive or the Environment Variable
http://support.Microsoft.com/kb/321805
You can check out the following link and also post your request in the Technet forum for further assistance:
http://social.technet.Microsoft.com/forums/en-us/winserverPN/threads
Hope this information is useful.
-
How to read the .txt adfLib pot file to the model layer by using the relative path
Hello
In my application, I use the ExtendedDynamicFldTbl (extends weblogic.wtc.jatmi.DynamicFldTbl), which the manufacturer requires the field file path table as a parameter.
In the API, it is said that this name of path can be an absolute path, a relative path to the directory where Java has started, or a relative path that can be found as a resource on the classpath.
I have created this ExtendedDynamicFldTbl to the model layer project, placed the fild_tbl.txt in a separate package and pass the path relative to the DynamicFldTbl constructor.
Given my code below to get the instance of ExtendedDynamicFldTbl
I just added the output of the build of the layer model to view the project of the layer and tested. It works fine and I am able to get the ExtendedFldTbl instance with all loaded fields. But rather than add dependencies, if I create an adfLibJar for the layer model project and you add to view the project of the layer, it does not work. It is not ablt to read the file of adf lib jar file.package model.tuxedo; public class ExtendedFldTbl extends DynamicFldTbl { private static ExtendedFldTbl extendedFldTblinstance = null; public ExtendedFldTbl(String tablePath, boolean flag) { super(tablePath, flag); } public static ExtendedFldTbl getInstance() { if (extendedFldTblInstance == null) { URL url = extendedFldTblInstance.class.getResource("resource/fldtbl.txt"); if (url == null) { throw new RuntimeException("Tuxedo Service : fldtbl.txt is not found in the path 'model.tuxedo.resource' "); } extendedFldTblInstance = new ExtendedFldTbl (url.getPath(), true); String[] list = extendedFldTblInstance .getFldNames(); System.err.println("fldtbl loaded. Total FML entries loaded = " + list.length); } return extendedFldTblInstance ; } }
Issues related to the:
1. How can I solve this?
2. Although I have kept the field text file table in the source of the project itself, when I read the url, it is
Instead of the physical directory, how can I use application in model layer context?"C:/Documents and Settings/raguramanv/Application Data/JDeveloper/system11.1.1.4.37.59.23/DefaultDomain/servers/DefaultServer/tmp/_WL_user/SampleWtc/3gkmt9/war/WEB-INF/lib/SampleWtc_Model_adflibSampleWtc1.jar!/model/tuxedo/resource/fldtbl.txt"
Thanks in advance
RambeauHello
Try /adf/ or /afr/ in the URL. Then includes the ADF resource loader which is used to get the contents of a lib of the ADF. Take a look at the structure of ADF library where the file is located in. It should be in a directory with /adf in the folder structure
Frank
-
How do you use relative paths in ColdFusion?
I'm having a problem that I can not wrap my head around. I have 4 sites all reside under C:\ColdFusion9\wwwroot\websites\. Unfortunately, when I use relative paths, he always navigates to wwwroot instead of from this record Web sites. I want to make sure I can use relative paths which are always calculated in the folder root of Web sites instead of the ColdFusion wwwroot folder.
I had a temporary difficulty just to create a mapping in the CF Administartor. Although, this became a problem because I had to change it whenever I worked on another Web site. In addition, it would work properly if I used a relative as path (/ documents). Instead, it only works if I did a relative as path (. / documents).
Can someone help me solve this problem? I spent so much time to try things it's not even funny.
I'm using the CF9 Developer Edition with Dreamweaver CS4.
CF built-in web server only supports a virtual server for each instance of CF, so you should change it whenever you want to work on a separate site, or create a separate instance of CF using the Instance Manager in CF administrator You won't have a Instance Manager available, given that you have chosen the 'standalone' CF during installation version. If you have reinstalled CF to use the JRun multiserver option, you can install multiple instances of CF and each would have a port separated (8300, 8301, etc.). However, consuming also considerably more resources on your computer.
The best solution for this is usually to install an external web server, IIS or Apache and use it with your single instance see IIS is a component of Windows, so the version of IIS, you can use is limited by the version of Windows you are using. If you do not have Windows XP, you will be able to use IIS to run several virtual servers. Apache won't work regardless of your OS, but can be a little more difficult to set up.
Dave Watts, CTO, Fig Leaf Software
-
How to keep a relative path in a global variable
Hello
I use Teststand 2013 and 2013 of Labview
Is it possible to set a relative path to a global variable in the Teststand? E.g. "... \vector1." HWS.
Or should I use Labview functions to solve this problem?
.
Thank you
The railways are much easier to handle in LabVIEW. Thus, you can store the relative path as a string and then use LabVIEW to make the absolute path.
I usually store a file into a global variable and then I can just concatinate the strings to build the absolute path. For example:
FileGlobals.Folder = "C:\\foo\\bar\\"
Locals.Path = FileGlobals.Folder + "blah.txt". -
How to build a correct relative path?
I watched this on the Microsoft Web site, but their views did not work. I have an application called Notepad ++ in my programs folder. The documentation says that so that the spell check function works, I have to include in the configuration of Notepad ++, a relative path to a specific dll in the folder programs. This is the relative path, I built that does not work. Any tips?
.. \Aspell\bin\aspell-15.dll
Hi okieseeker,This problem occurs with a third-party application, I suggest you to contact the manufacturer of the application for assistance on this issue. -
IVe recently changed my Apple ID and password so when I need to update the apps I uninstall then reinstall using the new id and password, if I do this with Facebook update I'll lose my entire history?
you need to ask FaceBook which
Maybe you are looking for
-
Re: Satellite L350 - screen goes black when I try to play
I have a laptop Toshiba L350 Sat. Its currently running on Windows Vista. Caused by a virus, I recently had to reinstall Windows. The laptop is now free from virus. My problem is that when I try to play some games that I have the screen goes black an
-
Why my Skype does not work? "KERNEL32.dll".
[The update by the moderator topic title should be more descriptive. Original section title was: "why my Skype does not work:------?']" It's saying "Fatal error failed to get proc for GetLogicalProcessorInfromation (KERNEL32.dll) address; __ ; someon
-
Command and Conquer: Generals will not work
Original title: Hello, I am trying to get my command and conquer Generals game to play, but he won't play I am running windows 7 ultimate. programs have problems with windows 7
-
HP Compaq 8200 Elite CMT PC: HP Support Assistant Runse forever
Since I got this machine, this "HP support Assistant" software turn on periodically and still works, but especially it gets stuck in step 2, "Download updates" and finally, I have to stop it after a day or two, so that it will freeze. Then, very ofte
-
I'm the administrator of this PC and I get the message that precedes every tiem I'm trying to install I game that has been purchased. Thia is a recent problem; em after the last day and I cannot get the dowlnlad to install despite the password for th