Changes to the font.ini file really work?

Similar Questions

• XP pro do not start after changing the Boot.ini file

  The problem is that my C: partition Windows 7
  D: has XP Pro

  These should be considered right resp. partitions 1 and 2?

  I wanted to first XP pro to start the default partition.

  A few days ago, I made a change to the boot.ini file. But since XP Pro was not starting at all.

  I tried XP Pro to start first that the default partition.

  Given that XP Pro and my D: drive have not been starting, I consulted the boot.ini file in C:, Windows 7 partition and I changed the order (i.e. partition No.) in the boot.ini file and saved it to the required location, i.e. D:/WINDOWS/pss.
  through my drive C: of work, i.e. the partition of Windows 7, but it still does not work because apparently even though I save here, the actual values and the paths of the partition are not actually be changed on the system. I confirmed this by going into the CMD shell switching to D: and by running the command D: > bootcfg.
  Apparently any values I save in the boot.ini file that I save as a text file or "All files" in D:/WINDOWS/pss/it does not actually change in the system because whenever I run the command bootfg values are remaining still and not able to be changed, because apparently it is not saved in XP Pro and the D : partition. No matter what I do and what I put in the boot.ini file to access the values through the windows 7 partition, the values that bootcfg returns me are always the same and he refuses to change the name of path or anything else. No matter what orders, I also put in bootcfg himself.

  These are the values that bootcfg gives me:
  default: multi (0) disk (0) rdisk (0) partition (1) \WINDOWS

  Boot entries:
  Boot entry ID: 1
  Friendly name of operating system: MS Windows XP Professional
  Path: multi (0) disk (0) rdisk (0) partition (1) \WINDOWS
  The operating system load options: / noexecute = OPTIN/FASTDETECT/usepmtimer

  My XP Pro partition is simply not booting, and it of my main partition and has all my work. It is imperative that it starts.

  My Windows CD is also not start because apparently my DVD drive does not work properly, I had the anti malware threatfire (ThreatFire) installed on my XP D:Windows program disk but have uninstalled just in case it was blocking my changes to the system.

  On C:Win7, I put the default operating system option in the Advanced tab for Win7 and the D:XP Pro to XP Pro, when he was the starter and work. Now I can only access my files D:XP Pro Player C:Win7. But XP is not just start. What shd - I do? Thks.

  I don't have a very practical windows CD but my CD/DVD drive is not read and does not properly.

  Looks like your original post stated that your cd/dvd does not work.

  Respectfully, you will continue these hap hazard patches and your computer will not start at all. I'll try to help you once again. Please follow closely.

  Start your computer by loading Windows 7. Click HERE and download EasyBCD. Install the software in trial version. Once installation is complete open EasyBCD. You will see an interface like the image below. Click Add a new entry.

  

  A new screen appears as in the image below. Use the drop down menu to select Windows NT / 2 k/XP / 2 k 3 as described below. Type the name of the operating system in the box below. Of course, it will be Windows Xp (you can add the home or Pro to the name if you want). Make sure now that there is a check mark in the box "automatically detect the correct player. Once you have completed these steps click on 'add an entry '. That's all! You are finished. If all goes well, and if you have followed these steps carefully, there, now you have a system dual boot.

  

  You can now start working on your cd/dvd problem.

• How can I change all the fonts in Windows system?

  I read this article about how to change the fonts, but in the SYSTEM.ini and WIN.ini, there are no sections named "windows".  I guess I might have to make one, but then the article says also that the police must be a .fon font.  Is this some sort of font file?  I think that most of the fonts in my folder of fonts opentype, certainly not "fon."  OpenType can be converted into fon?  Or can I just use opentype, or whatever it is?  Also I don't really understand the 'present in the windows\system folder' thing, although I think it simply means that the font file should be there.  I've changed most of the fonts on the appearance tab, but that does not change everything, especially dialog boxes.

  The System.ini file is used only for 16-bit applications, the file system.ini 'old' cards through the registry the following keys which are used for 16-bit applications:

  HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\WOW

  and

  HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\IniFileMapping

  The %systemroot%\system.ini file is kept only for compatibility reasons, for the use of applications of by16 bits that can't read and write in the registry.  There is nothing to change for Windows XP system fonts.

  For NT operating systems this should dissipate things:

  Overview of MS Shell DLG and FontSubsitutes

  Make sure that you back up the key front of 'experience '!

  John

• How to edit the boot.ini file in windows 7?

  I currently have windows xp 7 and added o/s. How can I change the boot.ini file?

  Type MSCONFIG in the start menu to run the System Configuration utility.

  On the Boot tab, set your options, and the operating system you want to run.  Changes will be automatically written to the boot files.
  Click OK to save your changes.

• How to save the changes to the HTML wrapper file?

  Hi all

  I'm working on the .swf file. I make a few changes to the HTML wrapper file, but the changes are saved in the file.

  Is there another way to do it?

  Thank you.

  Swati,

  Flex tends to auto-update the wrapper file that it generates, which is frustrating if you change, then your changes are lost. I usually make a second copy of this file in the src folder and change this one. Flex will then leave it as-is (since he never controlled) but it will be deployed to your bin-debug folder (or wherever your output goes).

  Richard

• Access to the php.ini file

  Hello

  I tried to get access to the php.ini file. But I always get the answer: 404 the/etc/php/apache2 requested URL was not found on this server.

  The path is: https://192.168.1.101/etc/php/apache2

  ReadyNAS-102, SSH is enabled, OS 6.2.5

  With witch tool and how do I open the path to the php.ini file?

  Thank you

  Thomas

  Thank you for your help.

  I made this way, but I suggest to use WinSCP instead of PuTTY. WinSCP is also free and much more comfortable than the PuTTY.

• When I start my system, some notifications invites to the top of their own and I still see the desktop.ini file in my documents/files please what this means?

  Every time I start my system, the Lync appears, a modem exe shortcut. files also appears, how can I stop this?

  I want to know the meaning of desktop.ini, I remove cause it's to show in most of my documents?

  Your thread was started successfully in the forum comments, so I moved it to the windows 'Repair and recovery' forum where is is more on the subject.  You must return to your topic and we tell which version of Windows you are using.

  Look in your startup folder to see if you see Lync and modem.exe shortcuts in this folder.  If so, remove them and you should no longer see these pop-ups when you connect.

  You can get rid of him, but it can return.  Desktop.ini is usually a file hidden, so you must have the display of hidden files and folders active if you do not see it.  Desktop.ini is a file that is present in many files and it is used by the process to "customize the folder.  It allows you to specify multiple behaviors to a folder and what desired icon displayed for a folder.  See http://msdn.microsoft.com/en-us/library/windows/desktop/cc144102(v=vs.85).aspx for a more in-depth explanation of the desktop.ini file.  For certain folders such as My Documents, you should probably leave it alone.  It won't hurt anything especially if you do remove it, but the folder will then behave like any other folder, you can create.

• the Boot.ini file is missing

  Miss me the boot.ini file, but I don't have a disc of xp files because windows xp is installed.  Should I buy windows xp to resolve this problem?

  First of all, make sure that you have not left a CD/DVD in a drive that is checked for an operating system before the system partition of the hard drive. If there's nothing there, you should be able to repeat your BOOT. INI file.

  XP BOOT. INI file resides in the root directory of the drive system (usually c :)). This is a simple text file, but marked as hidden. If you have another computer, you can create or copy one from a computer with a similar setup to yours (for example boot from C:, Windows XP files in c:\Windows, etc.).

  The following can be copied into Notepad and saved to create a simple BOOT. INI file.
  [boot loader]

  timeout = 30

  default = multi (0) disk (0) rdisk (0) partition (1) \WINDOWS

  [operating systems]

  "multi (0) disk (0) rdisk (0) partition (1) \WINDOWS="Microsoft Windows XP Professional "/ fastdetect
  If you have access to another computer, consider mount the hard drive broke as a slave and creation/copy of a BOOT. INI file in the root.

• cannot rebuild the layout.ini file

  I deleted all the files in my prefetch folder and now can not rebuild the layout.ini file

  Make sure that registry prefetcher and superfetch settings are enabled.

  Now run this command (create a cmd file and execute it):

  %windir%\System32\rundll32.exe advapi32.dll, ProcessIdleTasks
  %windir%\System32\rundll32.exe advapi32.dll, ProcessIdleTasks
  %windir%\System32\rundll32.exe advapi32.dll, ProcessIdleTasks
  %windir%\System32\rundll32.exe advapi32.dll, ProcessIdleTasks
  %windir%\System32\rundll32.exe advapi32.dll, ProcessIdleTasks
  %windir%\System32\rundll32.exe advapi32.dll, ProcessIdleTasks
  %windir%\System32\rundll32.exe advapi32.dll, ProcessIdleTasks
  %windir%\System32\rundll32.exe advapi32.dll, ProcessIdleTasks
  %windir%\System32\rundll32.exe advapi32.dll, ProcessIdleTasks
  %windir%\System32\rundll32.exe advapi32.dll, ProcessIdleTasks

  Defrag % lecteur_systeme % b
  Defrag % lecteur_systeme % b
  Defrag % lecteur_systeme % b
  Defrag % lecteur_systeme % b

  This will create the files again.

  André

  "A programmer is just a tool that converts the caffeine in code" Deputy CLIP - http://www.winvistaside.de/

• How to remove the entry for Hot Standby node in the odbc.ini file in Windows 7

  Although I could see the file odbc.ini under c: Windows, there is nothing specific to hot standby node in the file. I use windows 64-bit computer and I have issues with my odbc DSNS when connecting to another application, I need to delete the entry for Hot Standby node in the odbc.ini file based on what I had as a solution to solve the problem. My mistake was "communication error with the connection process. Find target processes while they waiting for answer', when I tried to pull a few tables to a data source by using the ODBC DSN.

  Hi Jay,

  Thanks for posting your question in the Microsoft Community.

  The question you posted would be better suited in the MSDN Forums.

  I would recommend posting your query in the link below.

  General Windows Forms:

  http://social.msdn.Microsoft.com/forums/en-us/WinForms/threads

  I hope that the information above helps you.

  In the future if you fall on any question relating to Windows, please do not hesitate to post your request here on Microsoft Community, we will be more than happy to help you.

• Form complete TNA in the NQSConfig.ini file.

  Hello Experts,
  
  Out of curiosity, I want to know the complete form TNA in the NQSConfig.ini file.
  
  Kind regards
  
  Mohammed
  
  Published by: Mohammed_owb on March 30, 2010 05:54
  
  Published by: Mohammed_owb on March 30, 2010 05:57

  OK so time for a bit of history...

  (1) Nquire gives a software called "nquire suites. nQuire launched its range nQuire of products at the end of 1999 to monitor and provide information in real time based on any factual problem or opportunity by launching an e-mail message or a page on any device, like a computer laptop, pager, mobile phones, PDAS, RIM, Americans and Europeans.
  (2) Siebel purchases Nquire for $65 million at the end of 2001 (http://www.internetnews.com/ent-news/article.php/894791) and rename it as "Siebel Analytics"
  (3) oracle buys Siebel in 2005 and renamed it as "Oracle Business Intelligence" in 2007.

  So basically, NQSconfig is the acronym of Nquire Server Config...

  -Vinay

• Add the user to the users group in the Users.ini file using c#

  Hello

  Using a c# application, we strive to add/remove a user from the TestStand Users.ini file.

  The CreateDeleteUsers.seq file in the samples of TestStand is used as a reference.

  We have seen that we are able to add the user to the list of user help file

  engine. UsersFile.UserList.SetPropertyObjectByOffset (0, 0 x 1, newUser.AsPropertyObject ());

  However, when we try to add the user to the user group, the sample file CreateDeleteUsers.seq said

  RunState.Engine.GetUserGroup (Locals.GroupName). Members.SetPropertyObjectByOffset (0, 0 x 1, Locals.User.AsUser.LoginName)

  If we try to replicate this in c#, the API seeks the last parameter (which is LoginName in the CreateDeleteUsers.seq file) as an object of property

  engine. GetUserGroup (this.) GroupName). Members.SetPropertyObjectByOffset (0, 0 x 1, newUser.AsPropertyObject ());

  This causes an exception of object reference when we run the application.

  Please advise on how to proceed.

  Thank you

  Arun-

  The members property is an array of string, so the 3rd parameter to SetPropertyObjectByOffset requires a string property object, IE. the user name and not of the user object. From the will of the user object error with '-17308; Specified value is not the expected type. ». The example should really be using SetValStringByOffset to be clearer so that you only specify the user name of the actual string.

• Where can I find the BOOT.INI file. INI?

  Hello

  On my old computer, HP Compaq nc6120, produktnummer: PU884ET #AK8, Serienummer: CNU508F2WQ, I installed Windows xp and windows 2000.

  Before when I started this computer I could choose if I want to start windows xp or windows 2000. But lately this menu does not appear. Comes to the place a line of messege 'bad START. INI file. From C:\WINDOW\', then windows xp starts automatically.

  I tried to find the CHEST. INI file with the help of windows search, but could not find this file. Can you please help how can I find the CHEST. INI file and how to fix? Or at least how to start Windows 2000?

  Sincerely

  ARIO Nahram

  Hej,

  Sorry to heare who. We hope that get you healthy as soon as possible.

  No I googled BOOT. INI and got a good code to it and the computer works as well as before. Thanks for concerning.

  Take care

  ARIO

• the font size does not work

  Hi guys,.

  I am new to waterfalls.

  I'm changing the font size of text by typing the codes directly and qml properties, but none of them works.

  Here is the code:

  {Label
  text: 'Hello '.
  textStyle.fontSizeValue: 60.0

  }

  I use OS x lion mountain to the code, I am worried if this is the problem.

  Label {
      text: "60 point font, it's large"
      textStyle.fontSize: FontSize.PointValue
      textStyle.fontSizeValue: 60
  }
  

• Open the URL or file not working in Firefox and Chrome (_blank)

  In Captivate 8, I created an advanced where action if the student clicks on an exit button, we present a web page pop - up in a new tab with an investigation into the matter to our company Web site and also to leave the window that was running the online course.  The problem is that it seems only to create this pop-up window when the student uses MS Internet Explorer.

  We ensured that pop-up blockers are disabled when we tested Firefox and Chrome, but it does not solve the problem.  The PC used to test this did Flash Player loaded on them for Firefox and Chrome.

  I initially had my command output on the same page of action after a number of breaks, so I tried to move later on a different page and added more than action breaks, in which case it was a timing problem.

  Someone there to meet other this problem where to open a URL or a file doesn't seem to work Firefox and Chrome even when no pop up blockers were?

  

  I want to Captivate 9, but I can't use this version because they have made some internal changes and now my Javascript does not work properly.  Therefore, I must stay with Captivate 8 until they fix their code base.

  Thank you

  Randy

  These breaks don't do anything. They break just the timeline.

  Your JavaScript does nothing no more. You try to set a Captivate variable called 'cmi.exit' that does not exist. You must use:

  SCORM2004_CallSetValue ("cmi.exit", "suspend");

  You must also set the request of nav:

  SCORM2004_CallSetValue ("adl.nav_request", "suspend");

  If there is a problem with a popup being opened in Flash, I would put everything inside an external function. You can put it in the standard.js

  function myExit()

  {

  SCORM2004_CallSetValue ("cmi.exit", "suspend");

  SCORM2004_CallSetValue ("adl.nav_request", "suspend");

  Window.Open ("url to your survey")

  }