Changing from cable to dsl ISPS.

Similar Questions

• HP OfficeJet 6700 - issues of networking after computers changed from cable wireless...

  We have changed our whole yesterday and left two computers (a Mac and a Windows 7 PC) be wireless to connect to the router.  The installation of the printer has not changed (it is set up wireless for everything).  The Mac has had no problem finding the printer and print as usual.  The PC was not able to print from.  It shows the printer as a faded option.  Print jobs that were sent in the print queue, but does not print.  I downloaded and used the doctor printing & scanning HP, including the wizard on the printer wireless, but have failed to get the connection works.  I appreciate any help you can offer.  Also, I apologize if I'm wrong at all since this is my first post and first visit to this forum.  Thank you!

  So if the Mac can see and print to the printer, which indicates that it is connected to your router OK.

  So, on the PC, go to start > Control Panel > devices and printers and delete the printer.

  Then, add the printer with this method:

  1. make sure the printer is on and connected to your network. Verify that you can access the printer's internal web page by accessing its IP address before continuing. Get his IP address for a network Test printed on the front of the printer.

  2. click on > start > Control Panel > devices & Printers.
  3. click on add a printer
  4. Select local printer
  5. Select create a new port and select Standard TCP/IP Port, and click Next.
  6. under device type, select TCP/IP Device. Under the name of host or IP address, enter the IP address of the printer. Click Next.
  7. Select Hewlett-Packard in the list of manufacturers and select and select your printer model. Click Next.
  If your printer model is not in the list, then select disk provided, browse the CD that came with your HP printer and select the first file begins with hp and ending with INF. click Open, then OK. Select your printer model. Click Next.
  8. If prompted, use the driver that is currently installed.
  9. He will ask the name of the printer - enter a new name or use the one existing. This will be the name of the printer that you select from other applications.
  10. we may ask you to share the printer. Choose No.
  11. the printing area of Test Page is displayed. Go ahead and print it out.
  12. click on finish.

• Why do you have my emoticons change from one day to the next and how can I get the 'old'?

  The choice of emoticons changed from one day to the next. I would like to have the 'old'. Why Gmail does not send a msg Heads Up? Thank you.

  Hello

  This does not sound like a Firefox problem, but a change that was made to Google for their e-mail service. I recommend that get you in touch with them through the channels of Gmail support and they may be able to help.

• I changed from an iphone 5 S 6 s without disconnecting from my watch, 5s has been cleared and my watch can not be unlocked so that I can't erase it to pair with the 6s. What can I do?

  I changed from an iphone 5 S 6 s without disconnecting from my watch, 5s has been cleared and my watch can not be unlocked so that I can't erase it to pair with the 6s. What can I do?

  This is what Apple said in their Article of support:

  Disable the match without your iPhone

  If you do not have your iPhone, you can always erase content and settings on your Apple Watch. On your Apple Watch, tap Settings > general > reset > erase content and settings. This will reset your Apple Watch to the factory settings.

  See you soon,.

  GB

• Search box entries changed from one day to the next in the UK? such as yahoo.co.uk and Ebay.co.uk... How can I change it back to the United States?

  No further details. The search box in upper right corner of the display suddenly changed from the United States to the United Kingdom. I have nothing to do with it. I noticed it just a couple of days, when I went to Google search. I can't change their return. He actually added Chambers (UK) and I've never heard of him.

  Sounds that the locale has changed somehow to en-GB.

  You can get the version of Firefox en here:

  • Firefox 9.0.x: http://www.mozilla.com/en-US/firefox/all.html

• I can't tp perform actions on email or some Web sites because the pointer does not change from a helping hand on all orders at the top of a page - any more down works fine

  In Hotmail, for example, I can open any message in the Inbox except the top one, but then I am unable to answer or to take further action because the symbol of the pointer does not change from a helping hand and clicking on has no effect.

  If I try to open the top message from the page by clicking on the command "Open" is gray.

  If I open the type of web page that has a number of menu items at the top of the page, I can't open anything either for the same reason - something more to the bottom of a page is fine. The type of Web site with menus on the sides can be used for all items except the top menu!

  Help!

  Concerning

  Brian

  The extension of the Yahoo! toolbar and the extension of Babylon have been reported because of this problem. Disable or uninstall the modules.

     * https://support.mozilla.com/kb/Troubleshooting+extensions+and+themes
  

• In the search box at top right, how do I change from Google to Google.co.uk. Or, just add Google.co.uk

  In the search box at top right, how do I change from Google.com to Google.co.uk. Or, how I just add Google.co.uk to the list

  You can go to the next page and choose the one you want to add; probably one of the elements of #11. Main engines:

  http://mycroft.mozdev.org/search-engines.html?name=Google.co.UK

  See:

  • http://support.Mozilla.com/en-us/KB/search+bar
  • http://KB.mozillazine.org/Search_Bar

• Store changed from the United Kingdom to China using my old zip code. Now cannot get back. Payment type is NONE, but get requests by charging to add card details.

  Store changed from the United Kingdom to China the other day using my old zip code. Now can not return to the United Kingdom. Payment type is NONE, but get requests in billing add card details that they are not everything. Postal code is changed back to UK. Phone is iOS 4 s 9.2.1. Any ideas how to get back?

  Hi Sandyback,

  Thank you for your participation in the communities of Support from Apple.

  I see that you have changed the country associated with your Apple (iTunes Store account) ID, and now ask you to provide a method of payment. This happens when changing the country on an existing Apple ID, according to why I can't select None when I change my Apple ID payment information?

  If you have changed your country or region

  When you change the country or the region of an Apple ID, you must provide a payment method and update your billing options. If you want to delete your payment method after you change the country or region, you can change your payment information to none.

  You will not be able to see or select the no payment option for one of these reasons. If you don't want to use a credit card, you can use another form of payment, for example, a gift card.

  Sincerely.

• Just changed from Groupwise to Google Chrome w/gmail, how can I get my documents to print to the post office?

  Normally I can do a right-click on a document and choose print, one of my printers is set up to create an electronic document.  Now that we have changed from one mail to another system it stills revealed the old e-mail system, "Groupwise".  How do I know what called the printer to display the e-mail system, I had to, "Gmail/Google + Chrome"?  Is no longer, we use Internet Exployer.

  Google is not an "electronic mail system. What you're talking about is a webmail interface displayed in a browser, in your case of Chrome. GroupWise apparently you provided a printer driver which converted a document to an internal document to Groupwise. What you want won't work.

  If you have any other questions, please refer to the Google Mail and Chrome support on the Google site.

• Screen fade slowly when changing from one page to the other

  Original title: melted screen

  Why my not to screen a slow fade when changing from one page to another.  Did not until recently.

  Hello

  1. what operating system is installed on your computer?

  2 are. what page you referring?

  3. when exactly are you facing this problem?

  4. have you made changes on the computer before this problem?

  If you use the Windows 7 operating system, you can follow the methods.

  Method 1:

  You can see the issue in the clean boot state. Read the following article.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/kb/929135
  Note: once you are done with the boot, please follow step 7 of article to reset your computer to normal startup.

  Method 2:

  I suggest you run the calibration of the colors of the display on the computer and check if it works.

  Calibrate your screen

  http://Windows.Microsoft.com/en-us/Windows7/calibrate-your-display

  Method 3:

  You can run the troubleshooter of display quality and check.

  Open the troubleshooter of display quality

  http://Windows.Microsoft.com/en-us/Windows7/open-the-display-quality-Troubleshooter

  Method 4:

  You can try to update the display adapter driver by visiting the manufacturer's Web site to download and install the latest driver package.

  For more information: update a hardware driver that is not working properly

  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

  Update drivers: recommended links
  http://Windows.Microsoft.com/en-us/Windows7/update-drivers-recommended-links

  It will be useful.

• Spell check in outlook express has changed from English to the french.

  spell check in outlook express changed from English to the french, and there is no option to return to English as when you mention the french options is available in the menu dropdown. Any suggestions?

  Hello

  I suggest you to visit these links and check if it helps:

  http://support.Microsoft.com/kb/932974

  http://blogs.msdn.com/b/dgoldman/archive/2007/01/03/how-to-fix-the-Outlook-Express-spelling-checker-when-the-French-dictionary-is-the-only-dictionary.aspx

  It will be useful.

• On windows Paint how do I change from uppercase to lowercase

  I paint my family tree on Windows Paint.

  To save space I need to use capital letters and tiny, but the Toolbox does not show how to change from the top to the Lower.How can I change this?

  I'll assume that since your posts here are not all uppercase, it affects only paint.

  Try changing the font used when you add text in paint - some fonts are still showing capitals.

• have changed from xp to windows 7, now does not work my usb2 camera

  have changed from xp to windows 7, now does not work my usb2 camera

  original title: usb2 camera

  have changed from xp to windows 7, now does not work my usb2 camera

  original title: usb2 camera

  You must install the driver for Winows 7 for the camera, * if * it exists. Get it at the web site of the manufacturer of the camera.

  Also, note the following:

  You ever need connect your device directly. Buy a card reader for the type of flash card your camera uses (they are very expensive), put the flash card and plug it into a USB port.

  Personally, I prefer to do it this way. It is much easier and doesn't use the camera battery. I have two cards - one readers that I keep on my desk next to my desktop computer and another that I keep in my case of laptop for use when traveling.

• How can I make the text in all the boxes down following objects when the text box is changed from 1 to 2 lines?

  Hi people Muse.

  I'm faced with a problem of text box:

  At the bottom of my page, I have the title "ACTING ERMUTIGEN ZUM". Without any manual adjustment, I was happy to see that the text box pushes down the following objects as soon as the title Exchange of 1 to 2 lines. Point out clearly: I didn t add any point to stop or change any additional settings to achieve this, it just happened automatically and that's exactly what I want to happen.

  To my confusion, I can´t find a way to apply this behavior for the second title 'COURAGE OBSERVES UND LOSEN. It s on the same page. When I drag the breakpoint controller in the design-time view from the left to the breakpoint 900 pxor do it in the browser after export of the site, the title changes from 1 to 2 lines, as assumed, , but then the next Don t objects react and stay in the same place they stay when the title takes only 1 line.

  You will find the site on businesscatalyst:

  WILLKOMMEN

  I´d appreciates your support very well. I m sure it s not a big problem, but after an hour of re - try and control and do not receive a millimeter in advance, I thought, he could be one of these 'Don t worry - here comes the solution'- Muse hero there, read this. What you...? ;-)

  Thank you in advance.

  Moritz

  –––

  1st Title: everything works fine...

  

  

  –––

  2nd title: the 1200 px BP do everything ready...

  

  .. .but as I drag the marker of BP to the left just as I did with the title 1, the 2nd title doesn´t lower content:

  

  If you set the text block "ZUM ACTING... "sensitive width via the resizing control, rather than"Stretch to the width of the browser", which will provide the behavior you're looking for.

  We will study the design compared to the difference of the browser view. It seems that how items are grouped in resizing behavior is different in the case of elements with parameters width Resize mixed, in the mode of creation of the Muse and the browser.

• When you change an item type only display in hidden element its value changes from any value in value null. Why?

  
  Dear reading

  When to change a display one item type in the hidden element its value changes from null value any value . Why?

  I would like to use the result of the query in the hidden item, as well as to display it in report footer.

  shortly the displayed element can read footer bu area hidden point cannot be viewved in the footer box. Why?

  footer

  & P11_DISPLAY_ONLY_ITEM.

  footer

  & P11_HIDDEN_ITEM.  )

  (site of apex.oracle.com Application Express 4.2.5.00.08)

  concerning

  Enformatik wrote:

  in the part of the properties point setting its source type as query retune unique value;

  but when you set its value to the calculation (before header) it works correctly.

  It is the expected behavior. The values defined in the properties of the Source element / by default are only put in the controls of the page displayed in the browser, not in session state. To refer to a session-state item value (as in a & P11_HIDDEN_ITEM. substitution of static text) then the value must be set in session state in a calculation or process that runs before the substitution reference is returned.

  Setting the value using a calculation is the right way to do it.