Changing listening Port number Web in EBS

Similar Questions

• How do you change the port number for Apex listener V2?

  I run listener Apex V2 in stand-alone mode on Linux.  I want to change the port number of the listener apex V2 (e.g. 80 to 8080).  How I do that without having to re - install the new listener?

  Thanks in advance

  PaulP

  Hi PPlatt,

  You can change your_listener_home_directory/apex/apex.properties

  http.port = 8080

  Stop & restart receiver.

  HTH

  Zack

• Select < of the Listener Port number > in which_table?

  I am writing a SQL script which, among other things, disconnects from Oracle and then reconnects to the same instance under a different name. I'm able to query v$ database and v$ instance to get most of the information I need (host, name of service, etc.) for the part of reconnect. The only part that miss me is the listener port number. I could hardcode it 1521, but it's not very flexible. Currently, I am asking the user (who is usually me) for the listening port number in the SQL script, but that just seems a little lame. So my question is this: is there a view or a table somewhere in the schema sys that I could use to display the configuration of the earpiece? I work mainly with the gr 10, 2 + databases.

  No, I don't think that that is maintained in one of the views and is not soemthing that you should believe would keep have changed (if the implementation of the network people are good). In order to check once and you should be fine.

  Aman...

• Change the Port number of e-mail outgoing "587" as required to use the Comcast e-mail

  When my email out through Comcast did not all Comcast more, technical support told me that I had to change the number of Port for outgoing in Windows Live Mail beta 110 to 587.

  Worked well, until I had a system crash.

  When I reinstalled Windows Live Mail, I could fine is no longer the 'Tools' button in the status bar and by result cannot change the port number.  So, I can't send emails from Comcast of Windows Live Mail.

  The inbound port setting is apparently correct already, as I had no reception bad don't mail... sending mail.

  I hope it will work for you.  I use Windows Live Mail 2009.

  If you look on the left side of the window, you will see the name of your e-mail account.  (Underneath there is Inbox, drafts, sent items, etc.)
  You'll want to right-click on the name of the mail account. (Right above where it says Inbox.)
  Then you'll want to click on properties.
  A properties box opens.  You'll want to click on the tab "Advanced" on the right side of the Properties window.
  The first area is the SMTP (outgoing) port number.  You just want to change it in 587.

• VCenter Service does not start after changing the port number

  Hi all

  Accidentally, I changed the port number for the Vcenter server from the portal of VCenter 10443 and dint realize that the Java application uses 10443 so.

  Could not start the server vcenter service, because its raise an error saying 10443 port is already im currently byt used another application.

  I tried to stop the Java service, in order to start the vcenter service and make changes to port again, numbers but I am unable to stop the java application.

  Please, if anyone knows how to change the number of Vcenter via config port or any other way, please throw a comment... Its much appreciated.

  Thank you

  Nirmal

  If you use the MSSQL database, locate WebService.Ports.http in the VPX_PARAMETER table and change to the correct port.

• Change the port number of the IOM servers

  How do I change port number of servers IOM to 14000 to some other port after installation/configuration and use of the server for more than a year.

  Connect to the weblogic console and stop the server instance managed IOM. Select the IOM server instance and change the port. Start it up again, then EM to change all internal references to the new port. Also change any other application integrated to reflect the change of port.

• How to change the port number of ISAKMP?

  The default port for ISAKMP number is 500, how can I change?

  The platform is Cisco 1841 IOS v12.4

  You will not be able to change the only phase 1 (ISAKMP) port UDP/500 to being the default value. What is the reason to change to other ports?

  You can encapsulate however phase 2 (IPSEC) ESP package in the protocols UDP or TCP to avoid the problem with the ESP packets through the NAT device.  It is called IPSec NAT transparency. Phase 2 is by default wrapped for UDP/4500 if the ESP packet passes through the NAT device, or you can also wrap it TCP or UDP on other ports.

  If you use TCP as the Protocol for the phase 2, then phase 1 will be using the TCP protocol as well on the same port configured.

  If encapsulate you with UDP for the phase 2, phase 1 will continue to use UDP/500.

  Hope that makes sense.

• Changing LISTEN Port

  Hi guys,.
  
  I am facing a weird problem. I have my speaker installed on 1522 and I want to bring back to 1521.
  
  
  Here's my listener.ora looks like now
  LISTENER =
  (DESCRIPTION_LIST =
  (DESCRIPTION =
  (ADDRESS = (PROTOCOL = TCP)(HOST = localhost) (PORT = 1521))
  )
  (DESCRIPTION =
  (ADDRESS = (PROTOCOL = CIP)(KEY = EXTPROC1521))
  )
  )
  
  ADR_BASE_LISTENER = / u01/app/oracle
  
  and my tnsnames.ora
  
  MyDB =
  (DESCRIPTION =
  (ADDRESS_LIST =
  (ADDRESS = (PROTOCOL = TCP)(HOST = localhost) (PORT = 1521))
  )
  (CONNECT_DATA =
  (SERVER = DEDICATED)
  (SERVICE_NAME = mydb)
  )
  )
  
  LISTENER =
  (ADDRESS = (PROTOCOL = TCP)(HOST = localhost) (PORT = 1521))
  
  
  So I tried following
  lsnrctl stop
  lsnrctl start
  SQL > alter the registry system;
  
  
  [oracle@localhost admin] $ lsnrctl status
  
  LSNRCTL for Linux: Version 11.2.0.3.0 - Production on March 8, 2012 17:57:58
  
  Copyright (c) 1991, 2011, Oracle. All rights reserved.
  
  Connection to (ADDRESS = (PROTOCOL = tcp)(HOST=) (PORT = 1521))
  STATUS of the LISTENER
  ------------------------
  Alias LISTENER
  Version TNSLSNR for Linux: Version 11.2.0.3.0 - Production
  Beginning of March 8, 2012 17:42:12
  Uptime 0 days 0 h 15 min 46 sec
  Draw level off
  Security ON: OS Local Authentication
  SNMP OFF
  Parameter Listener of the /u01/app/oracle/product/11.2.0/dbhome_2/network/admin/listener.ora file
  The listener log file /U01/app/Oracle/diag/tnslsnr/localhost/listener/alert/log.XML
  Summary of endpoints listening...
  (DESCRIPTION = (ADDRESS = (PROTOCOL = tcp)(HOST=localhost) (PORT = 1521)))
  The listener supports no services
  The command completed successfully
  [oracle@localhost admin] $
  
  
  So it's not registers all the services.
  
  If change the listener.ora and tnsnames.ora to 1522 port and repeat steps above.
  It shows all the services.
  
  
  Anything I'm missing, please help.
  
  
  Concerning
  Neo

  Neo wrote:

  So it's not registers all the services.

  Take a look at the parameter LOCAL_LISTENER of the instance (pfile/spfile).

  It specifies how the instance should contact the local listener - including the IP and port.

  Null value will return to the default behavior (contact port 1521, current hostname).

• Web application server - how to change the Port

  When installing LabVIEW, OR adds a process called "Application Web Server" (among a long list of other items) at startup.  It became an issue for our Windows users want to run our real application of Web server on their local computer.  My temporary work was about just disable the Web Application Server in the trunk to the port (8080) are available for other items.  My questions are the following:

  First of all, what kind of impact I look at developing LabVIEW programs?  This process is necessary if I want to work on the network applications?

  Second, it is possible to change the port number of the Web app server to avoid any problems that may exist?

  The Web Application Server is used by LabVIEW Web Services - only if you are not using/writing/developing LabVIEW Web Services, then it will not affect you.

  To change the port, open the Web-based Configuration utility NOR (normally on something like http://localhost:3582 /) and under "Web Server Configuration", you should see "Application Web Server" and you can select which port should be used.

  You can also access it Max by right click on "My System" and selecting "Web Configuration.

• change port number for the mobile server after installation

  Jin
  I use windows 2003 server release 2, Server Oracle 11 g R2 and oracle database lite 10g R3. I installed successfully the mobile server with port 80, but when I start the mobile server I get an error message indicating that port 80 is already in use. Now, I need to change the port number of the mobile server. can someone tell me the solution.

  If the Oracle Lite installation type is INDEPENDENT, then to change the port number of Olite in any other available free port number, you must edit the file by default-web - site.xml or site.xml - web-http file present in $OLITE_HOME/mobile_oc4j/j2ee/mobileserver/config directory.

  You can at any time change the port in the file http web - site.xml and bounce services, the new port will take effect.

• How to change the name of the ODI agent and port number

  I installed ODI standalone agent (11g) on a linux server.  We now realize that we need to change the name and port number of the agent.  Is it possible to change these or do we need to re - install odi agent?

  I know that I can change the name in the ODI, but I can't change the port number.  I would like everything to be consistent in all of our environments.  That's why we need to change the name of the agent and the port number.

  How do you start the agent? Which command you use to start?

  There are two ways, either by directly calling agent.bat and passing name agent and port don't start or you can run the sh/bat file created during installation (present in oracledi\agent\bin). The file name that is created should look like this (agent_localagent11g) where localagent11g is the name given during installation time and 'agent' is the prefix that was added by ODI.

  There is no configuration file to configure the port number and agent. Make sure that the port number and name you pass to agent.sh must match what is configured in odistudio.

  Agent.bat '-PORT = 20910 ""-NAME = localagent11g.

• vmWare Horizon Workspace - change port number

  Hi guys,.

  I installed the workspace vmware horizon as a proof of concept, everything works fine. I'm now doing the public gateway. The problem which is the port number (443) that uses the bridge can be put on the public because he is facing some of our other things. I wonder since everything is installed and working properly, what would be the proper way to change the GATEWAY port number?

  Thank you

  Unfortunately, in 1.0, we do not allow change the port number.

  Will you be able to move to 1.5? Then, allow us to change the COMPLETE domain name and port.

• Manually change the VIEW port number

  
  Our 11.5.9 system simultaneous report ADF, we have started a background service X at the Admin level for running report server. As the UNIX admin request, we must change the port number for X windows. Since it's the production, we have a lot of customization, I want to avoid undate the context file and run the automatic configuration service. Therefore, I tried to change the DISPLAY setting in the files of the environment on levels directly. However, it does not work. Does anyone know what I missed?
  
  Here is the list of the files that I hit.
  
  adcmctl.sh, adrepctl.sh, $IAS_ORACLE_HOME/Apache/Jserv/*.properties on two levels, re - has bounced back after the application.
  
  Thank you
  
  Sean
  
  

  This is Note: quick search 364838,1 - REP-3000: internal error from the Oracle package

  Good to know that the problem has been resolved.

• Change the port Analytics

  Hello
  
  Is someone can you please tell me if it is possible to change the port used by OBI (for example, I want to change the port number of 9704 to 8080
  So instead of http://localhost:9704 / analytical I want it to be http://localhost: 8080/analytical).
  And if so, how do I do it?
  Thank you very much!

  Hello...

  If you want to run the websdervice on the port number different or better yet by default port 80, it's what you have to do.

  Step 1: Navigate to your directory config of OC4J, ussally located in... :-OracleBI\oc4j_bi\j2ee\home\config

  Step 2: Add a new directory called: "backup_orignal". Copy everything in the config directory to the new directory. (better save then sorry...)

  Step 3: Open the file named by default-web - site.xml in an editor (XML).

  Step 4: between the {site} find the tag = port, change port = "80". Save the file.

  Step 5: Add a new directory called: "backup_change_YYYYMMDDNNN" (copy everything in the config directory to the new directory. (Why?, if you are not very careful during an upgrade you lose all your settings OC4J...)

  Step 6: Stop and start your OC4J.

  You can now run your OBIEE site from the new port number.

  Of course, you also need to change the port number in OBIEE config files:
  ... \OracleBI\oc4j_bi\j2ee\home\applications\bioffice\bioffice\WEB-INF\bioffice. XML
  ...\OracleBI\xmlp\XMLP\Admin\Configuration\xmlp-server-config.XML
  ... \OracleBIData\web\config\instanceconfig. XML

  Thank you
  Sandra Baludu.

  Published by: Sandra Baludu 7 May 2009 08:27

• Change the ports after installation

  Hi all

  quick question...

  I tried to search for him here and online, but without success.

  I'm running an ESXi host 5.0 for a school project.

  I managed to host using vCenter Server.

  During the installation, I do not change the ports, remote access port is still set to 443.

  Now, I want to connect via vSphere client on another location via ip address: 443.

  The problem is that my ISP does not allow users to redirect the ports under 1024.

  Today is my question, is it possible to change the port number after the installation, or do I have to re - install the vCenter server and configure during installation?

  Working through webclient is not an option for me, I want to continue working in the vSphere client and for the presentation, I need to show some of the plugins I use.

  I hope someone can help.

  Thanks in advance,

  Jordy

  Jordy, I think that you will need to reinstall it - are not so difficult, and will be the best way to do it. There should be a way without having to reinstall, but this may require additional tweak and changes to the config file.