Changing the text in one frame CMS Wordpress template on the local server

Similar Questions

• What would prevent a local administrator to change the local policies?

  The problem occurred on a workstation XP (svc pk 3) within a W2K3 domain. It is the only station working (103 others) which I can't distance in via mstsc since my post (also under XP svc pk 3). I went (work to) the workstation and connected as a local administrator, and then have pulled-up gpedit so that I could change the local user rights policy for "Refusal to logon via the Terminal Services" to remove the Everyone group. But the two buttons are grayed (add user or group, and delete). After reviewing several other local policy settings, I found that they also had their gray button. I then tried the same thing connected as a domain administrator. No joy. The same problem. I couldn't change the local policy settings through my domain administrator account or the local administrator account. So I checked the default domain and all policy policies assigned to the ORGANIZATIONAL unit in which resides the problem workstation account. All of these policies had the "Deny logon via the Terminal Server Services of' value 'undefined '.  Is it possible that one of our administrators changed the permissions on a registry key where the policy settings so that only he could change local policy on this box? Or is there another explanation?

  I found the solution. I had to give administrators complete control over HKLM\SECURITY. Once I made this change I could once more change local policy. Now, I need to implement a method to push this change for all our workstations...

  ICACLS?

• How can I change the SMTP server to any server I want to?

  This is a common situation, and I have seen many others ask a similar question. It is a simple question, but Thunderbird does not seem to allow it. In my case, I have a choice of two mail server outgoing. I can use my hosting company Godaddy or my Internet provider, the local cable operator Charter Web. By default, Tbird uses the same mailserver incoming and outgoing, if possible, so my e-mail account has been configured to use the outgoing Godaddy server.

  I would prefer, however, to use the local server SMTP of Charter. But I can't find any way to change to that of Tbird. I could do it in Outlook Express, because both servers are listed for each e-mail account and can be changed.

  In Tbird, there is a drop down menu to choose an outgoing server, with no way to simply type in a new server. Or am I missing something? I think not, because others report the same problem. I have vague memories that awhile back, Tbird would you allow to specify all server to an e-mail account settings and then test their validity before finishing - a manual of against an automated way to set up an account.

  The main thing is I want to review the outgoing server of what I want, but it doesn't seem to be a way to do it.

  When your problem has been fixed can you mark the thread as "solved" Please?
  Thank you.

• Response of local folders looks like the answer to the discussion group. No signature or formatting options. How can I change the local folders meets regularly?

  Please see image attached. Responses from the eyes of local folders as responses to the discussion groups. No signature or formatting options. How can I change the local folders meets regularly, as they are in the Inbox?

  I don't think that the format of replies to the messages in the local folders are linked with focus groups or to individual account settings. As local folders can contain messages between several accounts or identities, it is more likely that formatting uses the setting of the account or identity appearing in the: field when you reply.

  This is how I think it should work. How this works in practice may be different.

• Windows Anytime Upgrade, you may need to change the locale

  I'm trying to upgrade Windows 7 Home Premium to Windows 7 Professional.

  I type "Windows Anytime Upgrade" in the search field and go to the Express upgrade window.  I click "go online to choose the best product...". "and then it shows a window saying that I"might need to change the locale.  The computer is in the United States, whose English is the default location.  It will not progress beyond this screen.

  Windows Anytime Upgrade is no longer functional as it is a product of the retail, Microsoft sells more retail licenses.

  Your best option is to an Express Upgrade card for any inventory or Professional upgrade Windows 7 use the retail purchase with Anytime Upgrade from Windows 7 Home Premium product key.

  Where can I still get Windows 7?

  Version upgrade - Microsoft Windows 7 Professional Upgrade

  Microsoft Windows 7 Anytime Upgrade (Home Premium to Professional) [Code online]

  If the license for Windows 7 Professional, you have access to is a retail version update or complete, you can use the product key and the Express upgrade to Windows 7 Edition Home Premium to Windows 7 Professional. First of all, check that the edition of Windows 7, you are upgrading is already enabled (if it isn't, you will encounter complications and that you might start all by performing a clean installation). Click Start, type Anytime Upgrade, click on the option enter a key, enter the key of Windows 7 Professional on demand, click Next, wait while checking the key, accept the license agreement, click on upgrade, wait while the software upgrades, (it may take 10 minutes or more depending on the if updates are required) your computer restarts automatically, after the reboot, Windows 7 will notify you updating the computer, the computer will restart once more automatically and will be completed the upgrade, a window will appear notifying the upgrade was successful and your computer is ready to use, click Close, you should be upgraded to Windows 7 Professional your files, programs and settings retained.

• Change the local administrator passwd in a technical object of personalization

  Hello

  I would like to enter an existing CustomizationSpec and change the local administrator password before deploying a clone, but I don't want to change the stored specification or create a new.

  I tried:

  $spec = get-OSCustomizationSpec MySpecName

  $spec. ExtensionData.spec.Identity.GuiUnattended.Password.plainText = $true
  $spec. ExtensionData.spec.Identity.GuiUnattended.Password.value = 'newpass '.

  Then, I deployed a clone using $spec, but I can not connect to the clone with the new password or the original source VMs (blank) password.

  Can it be done without the help of the New-OSCustomizationSpec cmdlet?  -I'm not really a real spec created in the database that I have to delete it later, in large part because I would have to enter new credentials in the script domain user, or pull of an existing spec (don't know if it works well)

  I used PowerCLI 4.1 build 332441 U1

  See you soon

  Mark

  You will need to provide a VirtualMachineCloneSpec to the CloneVM_Task method.

  Here you can to place the CustomizationSpec, which is part of the CustomizationSpecItem.

  The following script is what you asked for.

  $vmName = "SourceVM" $vmNewName = "NewVM" $baseOSCustomizationName = "test" $newAdminPswd = "newpassword"
  
  $vm = Get-VM -Name $vmName $folder = Get-Folder -Name vm -Location (Get-Datacenter -VM $vm)
  
  $cust = Get-OSCustomizationSpec -Name $baseOSCustomizationName$spec = New-Object VMware.Vim.CustomizationSpecItem$spec.Spec = $cust.ExtensionData.Spec
  
  $spec.spec.Identity.GuiUnattended.Password = New-Object VMware.Vim.CustomizationPassword $spec.spec.Identity.GuiUnattended.Password.plainText = $true $spec.spec.Identity.GuiUnattended.Password.value = $newAdminPswd$cloneSpec = New-Object VMware.Vim.VirtualMachineCloneSpec $cloneSpec.customization = $spec.Spec$cloneSpec.poweron = $true$cloneSpec.template = $false$cloneSpec.Location = New-Object VMware.Vim.VirtualMachineRelocateSpec$vm.ExtensionData.CloneVM($folder.Extensiondata.MoRef,$vmNewName,$cloneSpec)
  

  Note that the new virtual machine is placed at the root of the data center.

• Changing the DNS server for ESX hosts?

  Our network administrator will change the IP address of the DNS server.  In this way, we will change those corresponding to ESX hosts.

  We would like to know

  (1) can we change the DNS server on execution of the ESX hosts without going into maintenance mode?

  (2) under what circumstances the ESX host will do use DNS servers?

  (3) memory, we should add all the IP addresses of ESX host in the hosts file in the Service Console, where is this hosts file located at?

  Thank you

  Tony,

  Use "service network restart" command to restart the network service

  Do not forget also that...

  Very dependent on DNS HA, HA will not work without the correct DNS configuration. The servers ESX and vCenter server must be able to resolve the name (FQDN full) / IPs in both feel to get a working HA.

• Loggin to the administrator of the remote site redirects to localhost on the local server.

  This is certainly news to me. I created a Wordpress site locally and then uploaded to the remote server. For some reason when I connect I get redirected to the local host and the version installed locally in XAMPP. I tried to clear the cache in Firefox, but nothing helped. When Apache and MySQL are disabled in the XAMPP Control Panel, he always tries to redirect to the local server and I get the error "problem loading page".

  Also, strangely, when I disable XAMPP the CSS for the site on the REMOTE server is not displayed! Any ideas short of clear and start over? I can't even to the admin of the site to change the password.

  The fixed. Had to manually change the siteurl value in the table options in the remote database. Thank God...

• Command to start the local server

  Is it possible to start a local server using a command (or Ant) Windows or Linux without having to open the LCCS SDK browser and click on the "Local Server" button in the developer tools section?

  Here are the files. It is worth noting that they are not very well

  tested, but seems to work.

  Unfortunately, you will also need to build your own afcs.swc.

  This is the change that you make in

  com.adobe.rtc.messaging.MessageItem:

  Look in createValueObject().

  Replace this:

  var bA:ByteArray = new ByteArray();

  bA.writeObject (body);

  writeObj.body = bA;

  with this:

  var bA:ByteArray = new ByteArray();

  bA.writeObject (body);

  bA.position = 0;

  writeObj.body = bA;

  You need to go back to the cursor position in the byteArray so that

  It can be decoded correctly.

  As I said above. It is incomplete and there are probably errors

  it, but I hope it helps.

  Good luck!

  -sand

• CSS style sheet appears on the remote server when I download my Web site, but it works very well to the local server

  CSS style sheet appears on the remote server when I download my Web site, but it works very well to the local server, if anyone can help I would be grateful.

  There are major problems with this page as shown in the screenshot below.

  

  This is caused by a liberal hijacking of APDivs (aka layers) for a main page layout.  This isn't what APDivs were intended.  That's why Adobe them removed from DW.  Unfortunately, not soon enough.

  I think you're the best option is to start over with a pre-built CSS layout that doesn't contain positioned elements.

  Either way, Flash is dead now.  Most of the people cannot display Flash media more.  You can convert the HTML5 video or use YouTube to host videos now.

  Nancy O.

• How to change the Web server from one server to another server

  Hi all
  
  Can you please provide the document to change the location of the web server from one server to another server?
  
  Thanks in advance.
  
  Thank you and best regards,
  Siva Prasad B

  Siva Prasad says:
  Hi Michel,.

  Coping PS_HOME just move the web server?

  And Michel and I said earlier that you need to reinstall your Web server... and to redeploy the PIA, which is not clear?

  Nicolas.

• where to change the outgoing server

  Just put a ssl on my outgoing server and need to update the settings for the outgoing server. It seems that this function within thunderbird is incomplete. After some googling I was able to get to a place where I could drop to the bottom of all the servers, I entered, but the option to modify one of the existing servers wasn't in the drop down menu.

  Account of the actions dropdown also lacks an option to edit an existing account.

  If I click on manage identities I can find my user and click on 'Edit', however it brings me to the same choice window drop-down menu for which account I want to choose. It's funny because I pressed a button to change the settings of the account but never I was given a chance to change anything.

  So where should we do to change the outbound servers thunderbid?

  Open the account settings.
  Outgoing/SMTP Server is at the bottom of the left pane where all accounts are included. There is a button to edit an existing SMTP server.
  It is hard to Miss once you have the account of the Actions of the menu drop down.
  There is no option in the Actions drop account to edit an existing account. You can make changes directly in the window account settings for any server incoming which are listed there.

• Change the DNS server automatically when switching to WiFi network?

  I am usually connected to one of the two wifi networks, one I have control on and I'm not. When I am connected to that I have no control over, I usually spend my DNS settings of the network server (which often breaks down) to a third party one, but I end up having to do this every time. Is there a way so that it would automatically change my DNS server whenever I connect to this network? I am running Windows Developer Preview

  Hello

  ·         What operating system do you use?

  ·         Your computer is on a domain network?

  Try these steps and see if it helps.

  Step 1: Run the network troubleshooter utility.

  http://Windows.Microsoft.com/en-us/Windows7/using-the-network-troubleshooter-in-Windows-7

   

   

  Step 2: Try to reset TCP/IP and check.

  http://Windows.Microsoft.com/en-us/Windows7/change-TCP-IP-settings

   

   

  Step 3: Uninstall and reinstall network/modem driver from Device Manager.

  (a) click Start, type Manager of devices in the search box and press ENTER.

  (b) Device Manager window opens, expand the network card.

  (c) right click and uninstall, reboot the system.

   

   

  Step 4:

  Follow the steps in troubleshooting from the link and check if that helps.

   

  Windows wireless and wired network connection problems

  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

   

   

  Step 5:

  Temporarily disable the security software.

  Note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you do not disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network during the time that your antivirus software is disabled, your computer is vulnerable to attacks.

  http://Windows.Microsoft.com/en-us/Windows7/disable-antivirus-software

  Reference: http://windows.microsoft.com/en-US/windows7/DNS-Domain-Name-System-frequently-asked-questions

• Change the Local C drive letters

  * Original title: assignment of drive letters

  When I installed Windows 7 (home edition) earlier, I tried to assign the letter D for the reader, but the installation process would not allow this and kept failing the letter C. can I change this to D now?

  The reason why I need to do this is that I have a program more former that works only under DOS and it will not run on any other drive except C.

  I have a 'plug-in' (auxiliary) drive that is already formatted for FAT32 and I want to give this the letter C so that I can run my BACK from that program.

  This sounds like a practical solution that can be made without too much trouble?

  Hello

   
  Thanks for posting your query in Microsoft Community.
   
  From your problem description, I understand that you want to change the drive letter to D of C, so that you can run a program under the C drive with DOS operating system.
   
  Unfortunately this action is not allowed because the current operating system, to which you have started is located on the Local C drive.
   
  If you want to know the method of assignment or change the drive letter, I suggest you open disk management and assign the drive letter and check.
   
  a. open computer management by clicking the Start button, click on the Control Panel, clicking system and security, clicking Administrative Tools, and then double-click computer management. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.
   
  (b) in the left pane, click Disk Management.
   
  c. If the hard drive is recognized in disk management and if there is no drive letter assigned, I suggest you do a right click on the drive and assign a drive letter and check if it helps.
   
  d. click on the player to change and then click on change drive letter and paths.
   
  Do one of the following:
   
  · To assign a drive letter if it has not already received, click Add, click the letter you want to use, and then click OK.
   
  · To change a drive letter, click on edit, click on assign the following drive letter, click the letter you want to use and then click OK.
   
  · To remove a drive letter, click on remove and then click Yes to confirm that you want to remove.
   
  Check this link for more information:
  http://Windows.Microsoft.com/en-us/Windows7/change-add-or-remove-a-drive-letter
   
  Hope this information helps, just reply to the State of the question to get help.

• ColdFusion Launcher does not accept the password when you try to change the web server

  I know this will sound stupid as wrong password is a password wrong, right? Well I swear I know my passwords and it's not having it.

  I am running coldfusion 9 and I want to change the default internal server that I put it to the top with the installation on apache server that ships with mac OS x. So I started the coldfusion launcher and clicked the button Web server connection utility to set up, he asks a password to continue, but usually accept it... I tried both of the passwords that I use for stuff course where I was confused which it requested one, but is not having either.

  I tried to change the password for the coldfusion administrator and still no joy. I know that sounds stupid, but I do not understand... How can I get if she does not accept my admin password... I have tried uninstall and try again once like stuff as it is a nightmare to get rid of my experience... always leaves a file somewhere that you can never seem to isolate who mucks upward following installation so I left it for the moment. Anyone got any ideas?

  OK, you cannot double-click the wsconfig file, cause, then you are not running it as sudo, so you will not be allowed.  'sudo' is 'Super user' and allows you to run a program, temporarily, as a super user.  If you do that you won't have permission to edit the httpd config file.

  Try the following.

  Launch the Terminal

  type: cd/Applications/ColdFusion9/runtime/lib (change the correct path if it is not the path to your ColdFusion)

  Press enter

  type: sudo java-jar wsconfig.jar

  Press enter

  It should ask you for your password. Enter it and press ENTER again.

  It should launch the configuration tool, this time with the appropriate permissions to modify the file httd.conf.

  Good luck