Changing the DNS server for ESX hosts?

Similar Questions

• PowerShell script to change the DNS entries for all hosts

  Ive tried many others which have been posted on the web and none work... Someone at - it a script to change the DNS entries on all hosts?

  OK, changed a few pieces my end, it worked but now it's... Try this (50% confident

   $dnsServers = ("192.168.111.3","192.168.111.4")
  
   Get-VMHost | Get-View | %{
      $ns = Get-View -Id $_.configManager.networkSystem
      $dns = $ns.networkConfig.dnsConfig
  
       $dns.Address = @()
       foreach($server in $dnsServers) {
         $dns.Address += $server
     }
     $ns.UpdateDnsConfig($dns)
   }
  

  If you found this information useful, please consider the allocation of points for correct or helpful.

  Alan Renouf

  http://Virtu-al.NET

• Change of DNS server for VPN clients

  I'm changing the DNS server which gives my VPN to VPN on a Cisco PIX 515E clients. Does anyone know what command it will increase from 10.6.0.2 to 10.6.0.4? The software version is 7.2 (3)

  Thank you.

  Usually, the DNS server is assigned in the relevant group policy, that clients use to connect. Please see this link for more information on the syntax of the command line.

• Change the DNS server, but consider e-mail to Office 365

  I now have a customer who wants his site softdanmark.dk moved and accommodated with catalyst for business as the new design I've done for the company by muse and previewed as: softdanmark.businesscatalyst.com.

  I've already added the domain name to Business Catalyst and gave him the dns data, but he still wants the email (MX) belong to the TDC, where he has his Office 365.

  Is it possible to only move the DNS server and keep the MX record at the old company?

  

  Hope you can answer my question.

  Hey there,

  You do not change the NS records, all you need to do is point the web traffic, so yes, have your screenshot you just need to change the record and when you set up the site in British Colombia you say outside.

  Registration information are:

  Adding a domain name to your site and take the live site

• can not change the dns server, always comes back.

  10.10.5 Yosemite

  My ISP has provided DNS servers are terrible and I still get messages "site is not reachable. I'd like to change the DNS from Google or Open DNS servers

  In SYSTEM preferences > network > DNS tab I delete 2 default entries & entry "8.8.8.8" & "8.8.4.4" (google dns)
  In the "areas of research" box, there are 2 entrances & I can't delete them.

  I click OK & apply - when I go back to the DNS tab, it was the old DNS.

  What should do?

  

  May be a corrupt .plist.

  Make a backup, preferably 2 backups on 2 separate drives.

  Quit the application.

  Go to Finder and select your user folder. With this Finder window as the windshield, select Finder/display/display options for presenting or order - J.  When the display options opens, check "show the library folder. This should make your visible user library folder in your user folder.  Select the library. Then go to Preferences/com.apple.systempreferences.plist.  Move the .plist on your desktop.

  Restart your computer, open the application and test. If it works fine, delete the plist for the office.

  If the application is the same, return the .plist where you got it, crushing the latest.

  Thanks to leonie for certain information contained in this.

• Change the DNS server automatically when switching to WiFi network?

  I am usually connected to one of the two wifi networks, one I have control on and I'm not. When I am connected to that I have no control over, I usually spend my DNS settings of the network server (which often breaks down) to a third party one, but I end up having to do this every time. Is there a way so that it would automatically change my DNS server whenever I connect to this network? I am running Windows Developer Preview

  Hello

  ·         What operating system do you use?

  ·         Your computer is on a domain network?

  Try these steps and see if it helps.

  Step 1: Run the network troubleshooter utility.

  http://Windows.Microsoft.com/en-us/Windows7/using-the-network-troubleshooter-in-Windows-7

   

   

  Step 2: Try to reset TCP/IP and check.

  http://Windows.Microsoft.com/en-us/Windows7/change-TCP-IP-settings

   

   

  Step 3: Uninstall and reinstall network/modem driver from Device Manager.

  (a) click Start, type Manager of devices in the search box and press ENTER.

  (b) Device Manager window opens, expand the network card.

  (c) right click and uninstall, reboot the system.

   

   

  Step 4:

  Follow the steps in troubleshooting from the link and check if that helps.

   

  Windows wireless and wired network connection problems

  http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows

   

   

  Step 5:

  Temporarily disable the security software.

  Note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you do not disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network during the time that your antivirus software is disabled, your computer is vulnerable to attacks.

  http://Windows.Microsoft.com/en-us/Windows7/disable-antivirus-software

  Reference: http://windows.microsoft.com/en-US/windows7/DNS-Domain-Name-System-frequently-asked-questions

• Change the path information for ESX ESXi hosts to access

  Hello all! I hope you guys can help me.

  I have about 47 hosts that I need to change it Round Robin storage path information. If I make the change in vCenter and restart the host it again changing fixed. So, I thought that I should change it to the level of the host through esxicli.

  I have about twice as many LUNS of the Hitachi SAN. I'd like to see if it is possible to make the change in all areas, in some way, or I need to make the change by host? Also, is there anything that I need to change sides San so that it works or not.

  I saw this VMware KB: modification of path information for ESX/ESXi hosts to access and assume that it is the best plan? But did not know of all put into custody, if necessary, that everyone ran to when doing this?

  You will need to make the change by the host and the KB you'll find is the right method.

• Change the image of an ESX host

  Hello

  I am fairly new to auto deploy.

  I have a lot of blades without deployment status by using the ipv4 configuration.

  I replaced a blade with a newer version, so I need a new image with a new driver.

  How this blade, the new image of loading without interfering with the 'old'?

  OldRule

  Model ipv4: 10.10.10.10, 10.10.10.11, 10.10.10.12, etc.

  NewRule

  Model ipv4: 10.10.10.10

  The 10.10.10.10 is 2 rules. How can I remove the old?

  Thank you

  PowerCLI

  VSphere Documentation Centre

• Change the DNS settings in the Pool of IP network

  Hello

  Due to a migration of our DNS servers, I have to change the IP addresses of the DNS servers defined in the (currently used) our BDE server IP pools. There is a Hadoop cluster with a large amount of data running using this pool and I do not have to deploy the cluster again. Restart of the cluster is not matter, so I planned the settings DNS for the cluster nodes have to change after reboot. Unlikely, I could not change the DNS settings. Is there a way (perhaps non-elegant) change those settings for the pool?

  See you soon,.

  Dustin

  Hi Dustin,

  BDE provides the interface to change the DNS server in the network added to the BDE.  You must change the BDE database to do.  Here is the solution:

  1 Server BDE connect you as user serengeti

  2. run this command: echo ' network dns1 set update = 'the_new_dns_server_ip' where name = 'the_network_name '; \q" | psql

  3. apply the new DNS server. There are two approach. You can choose one.

  (a) connection BDE CLI and run "cluster stop - name...". ' and 'start cluster - name... '. "to restart the virtual machines in the cluster, then the new DNS server will be applied.

  (b) on BDE server, run "serengeti - ssh.sh cluster_name " sudo sed-i of | nameserver. * | nameserver the_new_dns_server_ip| ' g' / etc/etc/resolv.CONF. The new DNS server should take effect immediately.

  Thank you for using BDE.

  Jesse @BDE

• Whence the ACS server get the DNS Info for the IP pools?

  I'm changing the DNS servers that my VPN users are assigned from the pools of IP on the ACS server. Where IP pools Gets the DNS server information. I changed the IP addresses of the DNS on windows server and rebooted. But VPN clients are always assigned the old DNS servers.

  ACS ip pools do not grow the DNS server information

  It is either transmitted from the setup of group for the VPN concentrator or

  It is to be send to the setup of the user/group ACS > attributes Radius (VPN 3000) > [026/3076/005] primary DNS.

  I hope this helps.

  Concerning

  Rohit

• DNS server for the WRT54GS v6 problem

  This router running for 2 years without any problem (even on Windows7 since las year), recently it wont let me conect to the internet, network and say sharing that the configuration of the computer center are good but no response from the DNS server is present.

  (Windows 7 RTM Ultimate x 86, Bellsouth / AT & T ISP in Florida.) Conexion ADSL, nine cables ethernet and material held in the best conditions, the network card: Realtek RTL8102E/RTL8103 Family PCI - E Fast Ethernet NIC (NDIS 6.20) (v7.2)

  ================================================================================

  What I tried:

  Reset the router or modem (connected to a Westell 6100), in order to define the default settings and (based on the Web reset and reset buttons)

  Flushing IP in CMD

  Make the web based configuration for my WRT54GS v6, releasing DCHP, renewing, defaults, etc...

  Upgrade the firmware to v1.52.7 (latest) nothing helps, dating back to 1.52.6 original.

  Shows Device Manager hardware works correctly.

  Windows 7 show me a link to view the properties of my WRT54GS when I right click on it, I also see the "Enable" option, but every time I use it I get "Connection Failed!"

  ===========================================================================================

  I'm not much of a tech guy, and read the forum does not help me a lot, so I ask for help please.

  PS: CD installed by default for her with her old EasyLink Advisor without success, tried also the last 2 Lela EasyLink Advisor, nothing helps.

  In addition, there is no default gateway glancing an IPCONFIG in CMD and now there is (192.168.1.1), which I use to enter its web-based configuration.

  That your ISP is a DSL provider, most of the DSL Modem has a DHCP server on them, so they act as a router. From now you the type of connection is NAT behind NAT.

  Order for your Linksys router to work with a DSL Modem. Connect to the Linksys router and on the Configuration tab configuration page, you must modify the "local IP address" to 192.168.2.1 and click on save settings...

  Once the settings are saved, unplug the power to the router and Modem, wait 30 seconds and then plug in the power to the Modem, and once all the lights are cover then you can connect the power supply to the router and check if you are online.

• What are the technical requirements for web hosting server?

  Does anyone know what are the technical requirements for web hosting server? I couldn't find anything!

  THX!

  It is not really all of the requirements. All web servers that support the HTML will work. You would have a very hard time finding a host that will not work. It's just straight HTML, CSS and JavaScript. However, if you plan to use forms or in the browser edition you will need a server that supports PHP. But again, it is pretty well 99.9% of Web hosts.

• Static IP address of WiFi requires the DNS server

  I was able to confirm this on two separate MacBook Pro (various models) the two Yosemite running 10.11.4.

  After assigning a static IP address to the wireless network interface, the MacBook ping to a address beyond the gateway by default unless there is also a DNS server on the wireless interface. I wouldn't need a public IP address ping DNS server.

  For example:

  This method works.

  

  But it does not work:

  

  

  At least I have change the DNS like this:

  

  Then it starts working again.

  I tried to initiate a capture of packets and the MacBook is not even send ping on the wireless interface requests unless there is a static DNS server assigned.

  Can anyone other confirm/deny this behavior for me?

  Thank you

  Rob

  What exactly are you trying to do?

  You try to assign a Mac with a LAN IP address? If so, do it in the router by selecting an IP address on the local network to use with the Mac Machine (MAC address). This assumes that your router is your DHCP server. Otherwise, you need a DNS server that is running on your local network to be able to distribute IP of DHCP addresses.

• How to manually change the DNS zone files?

  I'm running OS X version 10.11.2 (El Capitan) and using App Server version 5.0.15 on a Mac Mini.

  I need to change the DNS Zone files manually because the DNS Server App Manager does not provide a U / I in order to add some elements (such as adding a delegation, etc.).  I use TextWrangler (5.0.2) as editor-in-Chief.

  I found an old post on how to do this here, but the information listed it seems obsolete.

  I was able to find the zone files to:

  / Library/server/name

  as:

  CBI .

  When I try to save or overwrite the db. files, or try to save all the files in that directory, I get an error indicating that:

  "Save the authenticated for this file failed (error application code: 20004).

  Since a window Terminal, if I go to that directory and type:

  Echo hello > temp.txt

  I get:

  Permission denied

  I am logged in using an administrator account.

  Before editing the db. files, I turned off the DNS in the App Server, then exit the server application server.

  What should I do to manually update the db. files?

  These files are protected from root.  You need to elevate your permissions to be able to change them.

  Probably you use a text editor like vi, nano or pico command line.  sudo vi/path/to/file for example.

  Back up the files first to protect against error.  In addition, be aware that Apple can run on some of your changes if you change the.app areas.

  Reid

  Apple Consultants Network

  Author of "El Capitan Server" - Foundation Services: available exclusively in Apple iBooks Store

  Author of "El Capitan Server - Collaboration & control": available exclusively in Apple iBooks Store

  Author of books of Yosemite server and server Mavericks

• Unable to connect to the internet, the dns server is not responding

  Hello

  It is the second system I've seen in the last two weeks with this question, I reloaded the OS on the first.  The system is Windows Vista Ultimate x 64.

  That is the problem.  Open Internet Explorer 9 on a Windows 7 PC, you get the message:

  Internet Explorer cannot display this webpage

  Click on diagnose connection problems, you get the following:

  The DNS server is not responding

  Look at a detailed information your told to contact your network administrator (this is me - no other XP or Windows 7 PC on the network has a connection problem).

  Below that is the message:

  Your computer is trying to use a DNS server that is incorrect or does not exist.

  Note that this is a laptop that has started on another network with the same problem.  I took it to my office to solve problems.  My DNS server is a WIndows SBS 2003 server.

  Below that is a log file of etl you cannot open (Notepad considers undesirable, much of the use that is).

  The steps I did to try to resolve the problem.

  Virus system scan

  There is no hosts file, I've recreated which.

  The static value IP and DNS.

  I can ping the DNS server by its IP address, but not by name.

  I put the DNS address to 208.67.222.222

  Restored network drivers

  Reininstalled all network drivers

  Disable Microsoft Virtual WiFi adapter

  Any suggestions would be helpful.

  the

  Hello

  Have you made changes on the computer before this problem?

  I would suggest trying the following methods and check if it helps.

  Method 1:

  Try to reset the DNS cache by using the following steps and check it, if it helps.

  a. Click Start, type cmd.exe in the start search box, right-click on CMD.exe and run as administrator.

  (b) in the command window, type the following and then press ENTER: ipconfig/flushdns

  c. you will see the following confirmation:

  Windows IP configuration

  With success, emptied the Cache of DNS resolution.

  Method 2:

  Try the following steps to release and renew the IP address and check if it helps.

  a. Click Start, type cmd.exe in the start search box, right-click on CMD.exe and run as administrator.

  (b) in the command window, type the following and then press ENTER:
  - enough ipconfig at the command prompt and of the press ENTER
  - ipconfig / renew in the command prompt and press ENTER

  c. check if the problem is resolved.

  Hope the information is useful.