changing the values of loop iteration

Similar Questions

• Change the values of the cluster in while loop and in the face at the same time

  Hello.

  I have a little problem in a test program, that I'm working on. I'll try to simplify as much as possible. I have a cluster control that contains two controls A and B. I want to:

  1. switch to update the value of the command A a while loop
  2. allow the user to change the value of the B control through the face, while the loop is running

  To change the value of order in the while loop, I first get the cluster control cluster, update the value of the control for a way to group by name and finally rewrite the cluster in the cluster control.

  The problem is that if the user changes the value of the B control while control that is in the middle of the update, the new value of B control is lost because it was read before updating in the face. Is there a way to get around this?

  DennisBengs wrote:

  1. switch to update the value of the command A a while loop
  2. allow the user to change the value of the B control through the face, while the loop is running

  Then they do not belong in the same cluster.  They are disconnected obviously enough that they do not go hand in hand.

  Where it can get really complicated, it is that you're talking about the user and code changing the same cluster.  It is very dangerous and very difficult to manage.  You might be able to get there with a driving force.  But walk slightly, my friend.

• ADF table change the value of a column rest after executeQuery

  Referring to the instance, which is to correct the cause and especially implemented to solve this problem-

  Re: Table ADF with iterator without cache not updated; bug or feature?

  I'll have a search form and the basis of the table of results based on entity vo. The table of results is in mode editall. If I change the value in the inputtext for a line and I click on search again, I expect the value modified to reset. The text component is not autosubmit.

  If I put resetactionlistener in the search button, it works, but it resets then some other components which I don't want.  This makes me think under analysis is tris -.

  'But chooses to render using the value sent instead of the value of the database '.

  What is the correct implementation to handle this?

  Stamped UI components (such as af:table) have resetStampState() method.

  Then you can try something like:

  table.resetStampState ();

  AdfFacesContext.getCurrentInstance () .addPartialTarget (table);

  Dario

• Interactive report - out has changed the value of the column selectlist

  Hello

  I try to use a selectlist in an interactive report. I used "APEX_ITEM. SELECT_LIST' for this. My interactive report request is

  SELECT APEX_ITEM.checkbox (1, CUSTOMER_ID, NULL, NULL, 'onclick = "javascript:setvalue (this.value)" ') as "-",

  CUST_FIRST_NAME,

  CUST_LAST_NAME,

  APEX_ITEM. SELECT_LIST)

  p_idx = > 2,

  p_value = > TEST.

  p_list_values = > ' Y; Y, N; NO

  ) 'test' for DEMO_CUSTOMERS

  I had a "Override" button on the page. I try to get the modified values (for the field "test") and the customer ID selected as a semicolon-separated list just by clicking on the ignore"" button. The process code on submit is

  : P8_TEST_VALUE: = NULL;

  BECAUSE me in 1... APEX_APPLICATION. G_F01. COUNTING LOOP

  : P8_TEST_VALUE: =: P8_TEST_VALUE | « ; » || APEX_APPLICATION. G_F01 (i) | APEX_APPLICATION. G_F02 (i);

  END LOOP;

  But I still get the data value, not the value for column 'test '.

  For example if I'm changing the value of "N" to 'Y' after selecting the checkbox (client code corresponds to "6") and click on 'Ignore' button. I get the value '; 6n 'instead of '; 6Y'. is it possible that I can get the value of seelectlist has changed?.

  Thank you

  JJ

  Your problem is in the values of the selection list. The element is not sent to use in PL/SQL, best way to do it is with jQuery

  try adding this to your report:

  SELECT APEX_ITEM.checkbox (1, CUSTOMER_ID, NULL, NULL, 'onclick = "javascript:setvalue (this.value)" ') as "-",

  CUST_FIRST_NAME,

  CUST_LAST_NAME,

  APEX_ITEM. SELECT_LIST)

  p_idx-online 2

  p_item_id => CUSTOMER_ID,

  p_value => TEST,

  p_list_values => ' Y; Y, N; NO

  ) 'test' for DEMO_CUSTOMERS

  and to add actions to the lick... button or other trigger.

  $x("P8_TEST_VALUE").value ="";

  $("input: checkbox[name='f01']:checked").each(function())

  {var val = $("select [id ='" + $(this) .val () + "']") .val ();}

  $x("P8_TEST_VALUE").value = $x ("P8_TEST_VALUE") .value + $(this) .val () + val + ";". " » ;

  });

  Hope that this post will be useful for you.
  Andrej Grlica

• $esxcli to change the value of IOPS / s?

  So im trying to change the value of IOPS / s by '1' it seems im on the right track in looking at a few other scripts that had something similar, but mine does not seem to the entire cluster in loop, look like it does, but only the last host gets the values updates, so I'm missing here?

  Is it a snippet of code to connect to a VC, good practice get guests on a Cluster / Datacenter, then run agaisnt them? ID like to be able to keep a good labour code and then re use it on all my scripts? Now that I see this error Im curious to know if I was fooled into thinking that my other scripts worked not only on all hosts in a Cluster, which is a good way to check that?

  THX!

  # Script Variables
  $VC = Read-Host "Please enter the name of the VirtualCenter.
  $mycluster = Read-Host "Please enter the name of the Cluster or Datacenter Edition"
  $DiskID = "naa.600".
  $esxlogin = get-Credential
  # Connect to VC and get the ESX hosts per cluster named
  SE connect-VIServer $VC | Out-Null
  foreach ($esx Get-cluster $mycluster |) Get - VMHost) {}
  SE connect-VIServer $esx - Credential | Out-Null
  }
  #Retrieve instances esxcli and loop through them
  {foreach ($esxcli in Get-EsxCli)
  $esxcli.system.hostname.get)
  $esxcli.storage.nmp.device.list () | where {$_.} Device-match $DiskID} | % {
  $esxcli.storage.nmp.psp.roundrobin.deviceconfig.set ($null, $_.) Device, [long] 1, "IOPS", $false)
  }
  #Disconnect of ESX host
  foreach ($esx Get-cluster $mycluster |) Get - VMHost) {}
  Disconnect-VIServer $esx.name - confirm: $false
  }
  VCenter #Disconnect
  Disconnect VIServer $VC - confirm: $false | Out-Null

  You get the same behavior (white screen) when you run the script directly from the PowerCLI prompt?

  This could be a phenomenon of PowerGui

• Cannot change the value of mousewheel scroll

  After you have reinstalled windows and all I had on my old desktop, I seem to be unable to change my amount of scrolling the mouse on firefox. I looked through all the troubleshooting questions that have already been posted, and all users have responded that I had to access about: config and change the value of mousewheel.withnokey.numlines.

  However, when you access everything: config, I discovered that not only I don't the integer specified, I don't have any integer with a preferably name that contains "withnokey", so I tried to add it in me, but not to use. Currently my parchment done on lines 6 and 7 and I would like to go down to about 3.

  Hello, Skarlath, the scrolling behavior has been overhauled in firefox 17 (see for reference https://wiki.mozilla.org/Gecko:Mouse_Wheel_Scrollingtechnical information) - the old setting longer reverberate.

  It must still be possible to set a different frame rate. You can enter about: config in the firefox address bar (confirm the message information where it appears), search preferences starting with mousewheel.default.delta_multiplier_ ..., you can double-click on these parameters and assign a different value to - then a restart of firefox is required for the changed settings is taken into account.

• Change the value of all slides

  Hello world

  I need help today with a problem on the slide - void / knot vi and property.

  I would like to change any value of slides with a sub vi

  Any ideas?

  Thank you

  Hello

  Using the node property, you can change the value of the slide.

  Siva

• Change the value of varying directly?

  Suppose I have a variant from an external source.

  Suppose I know the data type, but I don't know the attributes and their values (if any).

  Is it possible to directly change the value of the variant, "under the hood" so to speak and leave all attributes intact?

  I know that I can read all attributes, generate a new variant with my new data and write them all back, but that seems very inefficient.

  Casting of new data to a variant, and then using the variant of data to convert the Original variants type that seems to work as well. Once again, kludgy.

  Sting autour with «...» VI.lib\Utility\VariantDataType\*.*, but so far, not to find a method 'live '.

  Thank you!

  You can use the structure of the element inplace to set the value of a varying existing.  It retains all the existing attributes.

• Can I change the values of the variables in the variables view control?

  I want to use the variables view control in Labview. I see only the values, but I can't change the values or create new Variables. Will there be a chance to do?
  I use Labview 8.6.1 and Teststand 4.1.1.

  You must activate the edit mode for the ApplicationMgr, by setting ApplicationMgr.IsEditor to true. Note that you must have at least the license of the custom editor for teststand so that it works (otherwise it will prompt the user to activate a license with these privileges).

  Hope this helps,

  -Doug

• How can I change the value of the sample during my simulation period?

  I'm about to set discrete PID profile vi to specify the values of the period of sampling of the order hold block. At t = 0, I wish that the value of 0.5 and then change to 1.0 when t = 5. Currently, only 0.5 goes to the waiting order discreet block. I think it's because the block takes this value and then use it for the entire simulation, do not check to see if the value has changed. Is there a way to tell the block to check this value at each time step and then adjust if necessary sampling its period?

  See code attached for reference.

  What is your overall goal for the sampling period? You will change the value more than once? Or only from 0.5 to 1?

  The PID setpoint profile should allow you to specify a profile for the values to send to the hold. He will see property values. For example if you specify only t = 0 setpoint = 0.5 and t = 5 setpoint = 1, you'll find it ramp the setpoint in 0.5 to 1.0 for the first 5 steps of time. If you want the sampling period of stay up to t = 5 0.5 is reached you will probably want to three elements in the array. set = 0.5 point t = 0, t = 4.99 set = 0.5, 1.0 = set point t = 5.

  If you're just fill one step, (from 0.5 to 1.0) you can use the Index Timestep in the Simulation parameters to determine the sampling period. Is attached a screenshot of what I mean.

• How can I change the value of a control on front panel?

  On the front panel, I'm doing a complex control that consists of a Slider control and control of the digital inputs. Both controls display the same information and either may be used for entry. When changing value, I want the other control to display the same value.

  How can I change the value of a control on front flap when another control changes the value? I know how to use a structure of the event to detect value has changed, but I do not know how to impose control on front panel to change its value in the block diagram.

  Why do you not use a digital display on the slider, and no code is required:

  

  EDIT: Yes, he said. ***

• changing the value of the indicator

  I need to change the value of an indicator, while the program is running.

  I enclose a VI

  1. a double is given as input to find derived from ptbypt, and then I compare the derivative (threshold) to enter the value to give a Boolean result.

  I need the user to change the threshold value as required by him.

  Thanks in advance

  Well, use the property node.

  Ran

• change the value of the button cluster

  Hi all

  I wrote a program that has 5 poles and all groups contain a STOP"" button. the program can stop when the button is pressed.

  When I press the button, the value of the button goes to False and else False. I want to come True. so I tried using the 'value' property and set the value "False".

  but it is still true.

  I use event structure to see that the value changes. and set to 'Stop the value changes' all buttons in a single event.

  How can I change the value of the false button?

  Thank you

  Ritesh

  
  

• How to change the value of string clustered, to implement using the node value of property instead of writing directly on the flow of data or using the variable

  new to labview :-) and I have a problem when I want to change the value of a string in bunches, and I want to implement this using the node value of property instead of writing directly to the stream or by using the variable, enclosed is the picture.   No matter, I have change in cluster (control) or value of Popery out (indicator) cluster, the value (sensor 7) dataflow keeps unchanged even I gave the new value by value of property node. Thank you to give me some advice about this.

  

  Hi GerdW

  Thanks a lot for your answer. The reason I'm stubbornly tring to break the flow of DATA is: we have a test system that have about 100 screws, they have a few connected flow, some of them will be unbundling a cluster dataflow chain to check the value in order to make the different cases.  Now I want to insert user event by changing the control and influential cases during run time.

  As I initially uses a global variable (to control cases) instead of unbundle string data flow, it works well.  But then, I found there are a lot of screws that are using the string unbundle.  One of the 'lazy' means, I tried is to change the value via the property node (because that way, I did not need to find all the places where using the unbundle string and replace them with the global variable), then I noticed a problem with "dataflow", the value in the stream of cluster in fact will not be changed by changing the value of the property node.

  I did a test with VI simple (like the picture in last post), and after reading your advice, I tell myself that I need to understand the concept of "DATAFLOW" in labview, it seems that my "lazy" way can not work in this scenario.

  I have attached the criterion VI here, have you furthur suggestions on what I can do in this case?

  Mant thanks!

  Minyi

• Change the value (current line) of multicolumn listbox using the mouse

  Salvation is a way to change the value (current line) of multicolumn listbox using the mouse?

  Here's a way to do it.