ADF table change the value of a column rest after executeQuery

Similar Questions

• How to dynamically change the value of a column in a report

  Hi, I'm new to APEX and I have a small requirement. I have a report in a page which I query. Report will always have only one record. I need to change a value of a column in this report of the value received from another page. I was able to send the value of another page on my page of reports to a hidden page element, but I don't know how I can configure this value received to this column in the report. Is this possible? If Yes, can anyone help with this?

  970829 wrote:

  Please update your forum profile with a real handle instead of '970829 '.

  Hi, I'm new to APEX and I have a small requirement. I have a report in a page which I query. Report will always have only one record. I need to change a value of a column in this report of the value received from another page. I was able to send the value of another page on my page of reports to a hidden page element, but I don't know how I can configure this value received to this column in the report. Is this possible? If Yes, can anyone help with this?

  Not really clear exactly what it is you are trying to reach. You want to replace the value of a column in the report with the value of a page element? If so, simply replace the column in the report with a reference to the required page elementquery:

  select
     empno
  , ename
  , job
  , :p2_sal sal -- Replace value of sal column with value of P2_SAL item
  from
     emp
  

• How to change the value by defect/dephault PF_ParamDefs after PF_Cmd_PARAMS_SETUP?

  Hello

  I use the SDK after effects with AE transitional Extensions to create transition for Premiere Pro effects.

  I need a PF_Param_POINT default, the coordinates of the center of the current sequence. The problem is that PF_Cmd_PARAMS_SETUP is called once at startup, and without any information of the sequence, so I can't set the values by defect/dephault based on the resolution of the sequence. I tried to change the default values in the PF_Cmd_USER_CHANGED_PARAM, and then set PF_ParamDef.uu.change_flags to PF_ChangeFlag_CHANGED_VALUE, but it does not seem to be accepted.

  Am I missing something? Or does anyone know a better solution?

  Kind regards

  Philipp

  Prime Minister sin't my forte... but is not undefined by default of a param in

  What percentage?

  wouldn't {50.50} always being the Center?

• Interactive report - out has changed the value of the column selectlist

  Hello

  I try to use a selectlist in an interactive report. I used "APEX_ITEM. SELECT_LIST' for this. My interactive report request is

  SELECT APEX_ITEM.checkbox (1, CUSTOMER_ID, NULL, NULL, 'onclick = "javascript:setvalue (this.value)" ') as "-",

  CUST_FIRST_NAME,

  CUST_LAST_NAME,

  APEX_ITEM. SELECT_LIST)

  p_idx = > 2,

  p_value = > TEST.

  p_list_values = > ' Y; Y, N; NO

  ) 'test' for DEMO_CUSTOMERS

  I had a "Override" button on the page. I try to get the modified values (for the field "test") and the customer ID selected as a semicolon-separated list just by clicking on the ignore"" button. The process code on submit is

  : P8_TEST_VALUE: = NULL;

  BECAUSE me in 1... APEX_APPLICATION. G_F01. COUNTING LOOP

  : P8_TEST_VALUE: =: P8_TEST_VALUE | « ; » || APEX_APPLICATION. G_F01 (i) | APEX_APPLICATION. G_F02 (i);

  END LOOP;

  But I still get the data value, not the value for column 'test '.

  For example if I'm changing the value of "N" to 'Y' after selecting the checkbox (client code corresponds to "6") and click on 'Ignore' button. I get the value '; 6n 'instead of '; 6Y'. is it possible that I can get the value of seelectlist has changed?.

  Thank you

  JJ

  Your problem is in the values of the selection list. The element is not sent to use in PL/SQL, best way to do it is with jQuery

  try adding this to your report:

  SELECT APEX_ITEM.checkbox (1, CUSTOMER_ID, NULL, NULL, 'onclick = "javascript:setvalue (this.value)" ') as "-",

  CUST_FIRST_NAME,

  CUST_LAST_NAME,

  APEX_ITEM. SELECT_LIST)

  p_idx-online 2

  p_item_id => CUSTOMER_ID,

  p_value => TEST,

  p_list_values => ' Y; Y, N; NO

  ) 'test' for DEMO_CUSTOMERS

  and to add actions to the lick... button or other trigger.

  $x("P8_TEST_VALUE").value ="";

  $("input: checkbox[name='f01']:checked").each(function())

  {var val = $("select [id ='" + $(this) .val () + "']") .val ();}

  $x("P8_TEST_VALUE").value = $x ("P8_TEST_VALUE") .value + $(this) .val () + val + ";". " » ;

  });

  Hope that this post will be useful for you.
  Andrej Grlica

• How to change the value of a field?

  Hello
  
  I am a beginner in the report and I try to change the format of a field trigger value
  by the PL/SQL code editor
  
  is this possible? How can I identify my field (: MONCHAMP: does not work = newvalue)
  
  @rosagio

  Hello

  You cannot change the value of a column, but the field display values. Do it with the built-in SRW. SET_FIELD...
  Take a look at http://www.oracle.com/webapps/online-help/reports/10.1.2?navId=3&navSetId=_&vtTopicFile=htmlhelp_rwbuild_hs/rwrefex/plsql/builtins/examps/srw_examples.htm
  It is built-ins different depending on the data type. The object_id is 0 every time for the current object.

  concerning
  Rainer

• How to calculate the sum of the values of some columns in a table

  Hello

  I want to get the column just the average of the values of some columns not all columns of the table.what I have to change exactly in this block diagram.even if the table size is 25 average, I want the division as the number of values in each column (= number of lines)

  

  just like that:

  

  
  

• Changing the values of abbreviation from the database to the ADF object

  I useADFJDeveloper 11g Release 2

  
  

  I use Entity object called Project referring to the actual database table. This table contains fields that contain values of the abbreviation; for example this table filed called STATUS that describe the current state for the project. this filed will be values such as: 'A' approved for, 'X' for rejected and so on.

  In the interface ( JSPX , or JSF Pages) I just drag / move the View object which refers to the Project Entity object . and the page displays the project files with their status as specified.

  It is:

  Is it possible to change the values of this observation to the real value of somewhere; It's like instead of the values (A, X,...) I want to have (approved, rejected,...)

  You can write in an el in the value of the State field as "#{binding.status.inputValue == 'A'? '} '. {Approved ': "Rejected"}

• How to set the value of a column in a table according to another column?

  Hello world!
  
  I use Apex 4.1.
  My question is how can I set the value of a column in a table according to another column?
  I have a table and when I insert the value in the column content, I want to change this value in the note column with the note, which is generated with pl/sql function (function of string returned if the typed value is in the range).
  
  I tried to use javascript as

   $('input[name=f02]').live('change', function(){
  if($(this).val()!='1'){
  $('input[name=f03]').val("test")}
  }); 

  for the development of the column note to test if the value typed in the content of the column is not 1, but this code assigns the value to all the lines and I need to set only the specified line.
  
  Can someone give me a hint in any way to do this if possible?
  
  Kind regards
  drama9346

  You will need create a process on your page type PLSQL and develop this process "we demand" of the page. In this process, you can run the PLSQL you need. That is to say to retrieve the note value as described in your PC:

  and when I insert the value in the column content, I want to change this value in the note column with the note, which is generated with pl/sql function (function of string returned if the typed value is in the range).

  In this process, you must provide a return value of the call, and you can do this by using htp.p. Example:

  DECLARE
     --putting x01 in a var to simplify
     l_test_var VARCHAR2(200) := apex_application.g_x01;
     l_return VARCHAR2(200);
  BEGIN
     -- a simplistic test
     IF LENGTH(l_test_var) BETWEEN 10 AND 20 THEN
        l_return := 'String is between 10 and 20';
     END IF;
  
     --this will write l_return to the buffer, and the ajax callback will receive this
     htp.p(l_return);
  END;
  

  And the code that I wrote above, which is javascript, would need to go where your current code is that binds to the onchange event. The result should be that, when a change is made to this element, an ajax request is made on the server. When the call is finished, it will be the value returned in the item you want.

• In the column of table when the values are grater that maximum linear axis it does not show the bar

  Hi guys,.

  In the column of table when the values are grater than there maximum linear axis it does not show the Bar.But I want to display the bar up to the maximum limit of the axis is linear without changing the limit max.

  Consider following the example:

  The values are 80 90 200 300

  and here is the result:

  Left: when I don't put maximum property of linear axis.

  Right: when I put in maximum property of linear axis to 200.

  

  Law 4th bar is not visible because the value of this bar is 300 which is excedding maxium. But I want the 4th bar to appear identical to 3 bar.

  How can I do this?

  Thanks in advance.

  Then you should change the value of Y to the maximum value.

  Another option, you should consider is changing the Render item column to reflect that the value is greater than the specified maximum value.

• changing the value of text within a column of a PivotTable

  Hi people,

  I get great help from this forum and I am very frequently. This time, I have a question about Tables, how to manipulate fields in a table using JavaScript. The requirement is as follows, I have a Table (100rows x 3columns), and few of them are hidden in the page layout. The first column contains the values of text such as sequential numbers, (the first column is visual index, 1, 2, 3... 100). now, I'm trying to write a script that replaces or substitutes the first column values in the text areas of space. Can you guys help out me if you do a script? or give me some resources where I can manipulate the fields from the table using JavaScript?

  Thanks in advance.

  Hello

  It seems that the table is static and will always three rows during execution. In other words, the user cannot add more lines. If this correct?

  You need not resolve the nodes in this case, because you are referencing fields and specific lines.

  Because the script is located in the square, which is in the same container as the table, the following would erase the contents of the fields in the second column:

  Table1.Row1[1].TextField3.rawValue = null;
  

  Your script accesses an object in the second row called Cell1. This seems to be a text object has no property .rawValue If you want to change the value at run time, you will need to change this to a TextField object.

  In addition, looks like that is not an object in the second row (Row1 [1]) called "Cell1". It seems that the first object is unnamed. This will also cause the script to fail. When debugging, it is useful to use the JavaScript Console to see the (control + J) errors when previewing the form or in Acrobat.

  Who help me?

  Niall

• How to change the lines of 68000 column value upto

  Hello
  
  I want to change the value of the column.
  
  I have a table called RefDoc
  
  Select distinct refdoc r.int_ref r where are.int_ref like '\\dxb% '.
  
  Int_Re__f
  
  
  \\dxb\Sample\BFE B777\2008\PO2025225. TIF
  \\dxb\Sample\RO\SFR\26-01-2009j\RO2022098.PDF
  \\dxb\Sample\RO\SFR\26-01-2009j\RO2040831.PDF
  \\dxb\Sample\BFE B777\2008\PO2025253. TIF
  \\dxb\Sample\RO\UM INV\26-01-2009\RO2018358.pdf
  ...................
  ...................
  
  until 68000 rows
  
  
  
  I want to change to \\AUH instead of \\dxb.
  
  I want the table as
  
  Int_Re__f
  
  
  \\AUH\Sample\BFE B777\2008\PO2025225. TIF
  \\AUH\Sample\RO\SFR\26-01-2009j\RO2022098.PDF
  \\AUH\Sample\RO\SFR\26-01-2009j\RO2040831.PDF
  \\AUH\Sample\BFE B777\2008\PO2025253. TIF
  \\AUH\Sample\RO\UM INV\26-01-2009\RO2018358.pdf
  ...............
  ...............
  .............
  
  
  
  
  Thank you
  Nihar

  REPLACE the user function and change

  UPDATE refdoc
     SET int_ref = REPLACE(int_ref, '\\dxb\', '\\AUH\')
   WHERE int_ref like '\\dxb\%'
  

• Starting from two data tables, how do you get the values in two columns using values in a column (values get col. If col. A is not null values and get the pass. B if col. A is null)?

  Two tables provided, how you retrieve the values in two columns using values in a column (the pass get values. If col. A is not null values and get the pass. B if col. A is null)?

  Guessing

  Select nvl (x.col_a, y.col_b) the_column

  from table_1 x,.

  table_2 y

  where x.pk = y.pk

  Concerning

  Etbin

• Single request for the display of all, but the values of 1 column for all tables

  Hello
  
  All tables have the column SYS_CREATION_DATE.
  But I don't want to not display the value of this column
  
  Can anyone suggest a way in which I could achieve this?
  
  Oracle version: 11 GR 1 material
  OS: SunOS
  
  
  See you soon,.
  Malika
  
  Published by: user9131570 on July 6, 2010 19:57

  user9131570 wrote:
  @Tubby

  I * table-wise display the values of all but 1 columns (SYS_CREATION_DATE) in my database.*

  I need it to compare to another data base for all these values.

  I would like to make a wild guess at what you are getting.

  In view of these two tables

  create table emp
     (empid number,
      empname varchar2(15),
      empaddr   varchar2(15),
      sys_creation_date date);
  --
  create table dept
     (deptid number,
      deptmgr varchar2(10),
      sys_creation_date date);
  

  you want to combine somehow

  select empid,
           empname,
           empaddr
  from emp;
  

  with

  select deptid,
           deptmgr
  from dept;
  

  in a single sql statement?

• How ItemRenderer change for DataGrid column based on the value of this column?

  Hello! I am trying to create a DataGrid that has a component Button to register when the value of this column is 'Open', then a label saying full when the value of this column is "Full". But Im having a hell of a time he find.
  
  Here's my MXML with 2 different inline installation of components for different rendering engines point 2:
  
  <? XML version = "1.0" encoding = "utf-8"? >
  "" < mx:Application xmlns:mx = ' http://www.adobe.com/2006/mxml ' layout = "absolute" >
  
  < mx:Component id = "RegFull" >
  < mx:VBox horizontalAlign = "center" verticalAlign = "middle" >
  < mx:Label id = 'Full text' text = "Full" / >
  < / mx:VBox >
  < / mx:Component >
  
  < mx:Component id = "RegButton" >
  < mx:VBox horizontalAlign = "center" verticalAlign = "middle" >
  < mx:Button label = "Save" / >
  < / mx:VBox >
  < / mx:Component >
  
  < mx:DataGrid id = "scGrid" width = "100%" height = "100%" number of lines = "4" >
  
  < mx:dataProvider >
  < mx:Object label = "Status" data = 'Open' / >
  < mx:Object label = "Status" data = "Full" / >
  < mx:Object label = "Status" data = 'Open' / >
  < mx:Object label = "Status" data = "Full" / >
  < mx:Object label = "Status" data = 'Open' / >
  < mx:Object label = "Status" data = "Full" / >
  < / mx:dataProvider >
  
  < mx:columns >
  < mx:DataGridColumn id = "RegCol" headerText = "Reg" dataField = "data" / >
  < / mx:columns >
  
  < / mx:DataGrid >
  < / mx:Application >
  
  How can I dynamically use the right of itemrenderer based on the value of the field? THANKS FOR ANY HELP PROVIDED!
  
  The best
  Stephen

  You can have more than 1 column renderer engine. There are two ways to do this. One way would be to use States. A State for each possible value in the data. Since you either want a button (data == 'open') or a label (data == 'Full') by using the States wouldn't be a bad choice.

  Alternatively, you can use a canvas instead of a VBox. Make a label and a button with horizontalCenter = "0" "0" = red to make them each other. Make it visible according to the data value:

  
  
  
  
  
  

  where dataField is the value of the property dataField on this converter DataGridColumn.

• Trigger that fires on the value of a column

  Hello everyone,
  I'm willing to do a trigger working on the column value.
  the requirement is that the column has the date and time I want to automatically update another table on the specified time. like for ex. leaves saying the value of this column is 26 October 2008 21:00 then date and time the trigger triggers, delete this value and update another table.
  so is it not to write something like this, or any other way to do this.
  Thank you
  Rahul

  like for ex. leaves saying the value of this column is 26 October 2008 21:00 then date and time the trigger triggers, delete this value and update another table.

  What you could try is:
  1 create the procedure that makes some logic you want
  2 create a trigger on the table (before integration), in which you can create a task (dbms_job/dbms_scheduler) who perform the previous procedure at the time defined by the value of the column.
  3. a validation will validate your changes of data and validate the creation of jobs, cancel rollback job creation.

  That way, your work (aka trigger) fires exactly at the scheduled time.

  Nicolas.