Channel fault & stimuli profile

Similar Questions

• Channel Fault Manager does not apply if selected misconduct in the filtered list

  In the 2011 and 2013 of VeriStand Manager channel fault, if I type a string in the text field and click the icon of the bulleted list (for filter) then apply a fault to a channel rating, nothing is actually happening. It seems that I need to locate the channel in other words (e.g., the tree cascading method), then apply the fault in this way. This seems to be a bug. Can anyone confirm? Thank you.

  Good afternoon h_yong,.

  I took a quick glance at this behavior and can confirm that it is a bug. It was noted in Corrective Action Request (CAR) #459404 be resolved in future versions of NI VeriStand. For now, the workaround is instead of clicking the button "Add Fault", double-click on the channel in the list you want to fault. This automatically switch to the tree view and bring up the fault value window. After having entered your value and press 'OK', you will notice that the channel now added to the list of channels failed. Please let me know if you have additional questions or concerns about this behavior.

  I hope this helps!

  -Ryan_S.

• Issue of Python API and profile of Stimulus

  Hello

  I am using IronPython with Visual Studio 2010 to create automated tests of a PXI system I have. Most of my knowledge API (and Python) so far has been coming to this thread of Iron Python . Although very useful. I am not able to get the parts of profile of Stimulus work. I have command over the line, forcing the acquisition of basic data output voltage, but I was hoping that use the far more high-level control provide by VeriStand.

  My methodology so far has been 1) create a profile of Stimulus in the Editor (something simple like a shifted sine wave) 2) I do not specify a specific channel in the profile (because I want to use the same waveform on several channels, in order) 3) record 4) Point the Python script to the sinewave.nivstest of the file Run 5). Is there something wrong with this process?

  The problem is that 'running' is really doing nothing. I'll have to study this more within my reach, but the result is something (it begins almost at work!) but for something that should be hard about 20 seconds, it ends immediately after the first 'blip '.

  I use Iron Python 2.7, VS 2010 Shell. If it's important for some reason, I use a custom material OR and card FPGA DAQ. And I would say force SetChannelValue (X) works for all outputs.

  Thank you very much!

  It's probably because you're playing a stimulus that has no mapping. The same thing happens if you specify a mapping in the profile?

  Unfortunately, there is no API in NI VeriStand in 2010 to change the mapping. So that's all that you specify when you create with the GUI. However, the nivstest file is actually just XML so that you can use any XML parsing and API for editing to change the mapping. If you don't want to use an API for XML editing, you can try to use the technique in the VI posted on this thread to change the mapping.

• Mix colors Pantone - like CMYK channels?

  Hey everybody,

  I just registered on the forum and had a look. Hello to all and I'm happy forums like this are around!

  So, my question is I hope that whoever is possible. I looked away but can't find no difinitive answer or maybe I did not write the question right but that's...

  What I want to do [in photoshop], treat 4 colors pantone CMYK channels. I mean by I would like to replace the Cyan, Magenta, yellow and black with my own colors [pantone colors] and ask them mix and act exactly like these channels. As when I open a full color image and my pantone [or any color] channels or color profile is activated, the full color image will react to these colors [with the mixture of colors].

  Instead of 45% yellow Cyan, 55% Magenta, 83% and 2% black in a given location, it would be a mixture of the 4 colors chosen [example: 45% pantone A, 55% Pantone B, 83% Pantone C, 2% Pantone D].

  or to say it another way, if I was to color the background in, say, a blue, I would be able to use the "Info" Panel to see how each pantone color was mixed to create this color. Of course, there would be a limit to the colors that I could create based on the pantone colors, that I select.

  I don't want to do anything with this printing technique. I'm looking to him only as a spectator to the screen, or maybe use it in a certain way for screen printing.

  Anyone have any ideas on how to achieve this?

  Thanks in advance.

  How about using outdated color management settings, pre-profil CCI?

  Enter your color schemes, and select Custom CMYK as your working CMYK space. Under the colors of ink, select custom, defined the four colors by the eye and check the estimate overprints. It won't be very accurate and it would be certainly better done using color profiles, but I suppose you expect not much accuracy. And don't forget to change your settings back to something more appropriate for litho printing, if you don't have any.

• LR shows different WB

  I put my Nikon D4 WB to 5200 K.

  When I open the picture in LR 5.6 or camera Ram 6.7 the WB is 4900 K (shooting).

  If I open the picture in Nikon NX - D WB is 5196 K.

  (If I set the WB to same sunshine coming)

  Can someone tell me why the WB is different in Camera Raw and Lightroom?

  WB is amplifying the red and blue channels (usually leaving unaltered the green) with multipliers that are suitable for a given temperature light. For example, the World Bank for the day light could be something like R X B X 1.4 and 2.0; because the light is blue, the red channel be stimulated more offset. The exact choice of the multipliers is also influenced by the profile of Nikon camera used by a jpg file, because it determines how the red and blue channels are rendered before balancing. But when do a Raw file no WBing is made by the camera for the Raw format, well that multipliers are listed in the metadata. LR reads these multipliers and use them when the value is 'As Shot'. But the LR GUI does not display the values of multiplier (which could be confusing for some users). Instead, it shows the temperature of the light which could have required the use of these specific multipliers. IOW, the camera makes a calculation of the temperature for the multipliers while LR not calculating inverse multipliers to temperature. He reached a different result due to two factors; Color temperatures (A.) do not refer to a single color, but rather a range of colors and B.) Treatment of LR does not use the Nikon-made camera profile, but rather its own Adobe-made profile which is necessarily different. Bottom line - the temperature on the LR GUI is a ' sort of ' thing that should not be taken too seriously. The important thing is the gray that should be neutral are actually neutral.

• Reorganization of the JSON data

  Hi all

  I need help, reorganizing the data I receive from a JSON Unflatten.
  I have a JSON string of a call to API (JSON unflatten) that contains a name (String), a digital and a channel (also a string).
  The JSON Unflatten automatically directs the data it receives in order, the data is provided.  The data is information on the channels.  The problem arises when not all channels are provided.  If out of 12 channels, the JSON receives information on only 4 channels, he ordered the 1 to 4 in the table.  However, 1 may not correspond to channel 1 and can actually be channel 5 and 3 might not correspond to channel 3 so on and so forth.  I want to reorganize the JSON based on reading channel (a channel named canal).  So, if in the table that Channel 4 is actually 12 (based on the channel of the channel, i.e., channel-12), I would link data from Channel 4 to profile 12 in a new table, so that the order of the channels still dependent on chain channel and not according to the order of unflatten of JSON.

  Please help as I am running out of ideas on how to solve this problem.

  Thank you.

  That's what is lying to you?

  PS: Try to avoid the multiple index table - it is preferable to use arrays and loops

• problem playing .m4a

  Just got a new helmet and started to copy my collection of CDs for listening on the meadow.  The format .m4a I tore my first cd to play fine on my computer, but only sometimes a 1 second or less burst on the meadow.  Any suggestions?

  OK, I got this job... the line sound-juicer for the .m4a type should be:

  audio/x-raw-int, rate = 44100, channels = 2! Profile of FAAC = 2 bitrate = 192000! ffmux_mp4

  (Note the profile = 2 bitrate = 192000 section - see the following link for more information http://ubuntuforums.org/archive/index.php/t-1112334.html

• Work with QA / JMS B2B card Basic for the various agreements

  Hi all
  
  I sent two SOA composite, SOAComposite1 and SOAComposite2.
  
  SOAComposite1 is configured with AQ based B2B adapter for agreement 1 and SOAComposite2 is configured with JMS based B2B adapter for 2 of the agreement.
  
  When I put "use JMS Queue as default ' (under B2B console-> administration - Configuration) to true, the payloads at once the agreements are intended to SOAComposite2.»
  
  When I put "use JMS Queue as default ' (under B2B console-> administration - Configuration) to false, the payloads of the two agreements are intended to SOAComposite1.»
  
  Note I'm using the default queue of waiting or B2B_IN_QUEUE for JMS and IP_IN_QUEUE for QA.
  
  But the requirement is of respective charges should be directed to respective SOA Composites.
  
  Help, please.
  
  Thank you
  Monica

  SOAComposite1 is configured with AQ based B2B adapter for agreement 1 and SOAComposite2 is configured with JMS based B2B adapter for 2 of the agreement.

  Whatever your place of observation is correct according to the B2B functionality. If "Use JMS Queue as default" is set to true by default, incoming messages will be delivered to the destination JMS (B2B_IN_QUEUE) or by default, incoming messages will be delivered to the destination of the QA (IP_IN_QUEUE)

  To deliver messages to a particular destination, please follow the procedure - below

  1. create internal delivery channels in the profile of the host for AQ (IP_IN_QUEUE) TP and destinations JMS (B2B_IN_QUEUE).
  2. Select these channels in the various agreements and redeploy (save + validate deploy) agreements
  3 retest now

  Kind regards
  Anuj

• Fault faultString = CPP & quot; error & quot; faultCode = & quot; Channel.Call.Failed & quot; faultDetail = & quot; NetConnection.Call.Failed: HTTP: failed & quot;

  Hi all
  
  I am facing this error / fault message for specific conditions of the remote call.
  "Lack of RPC faultString ="error"faultCode ="Channel.Call.Failed"faultDetail =" NetConnection.Call.Failed: HTTP: failed ".
  
  Note: If the call locally made Remote API, its works well (read the results correctly).
  *********************************************************
  Clerk of result error: [RPC Fault faultString = "error" = "Channel.Call.Failed" faultDetail ="faultCode" NetConnection.Call.Failed: HTTP: failed "]
  to mx.rpc::AbstractInvoker / http://www.adobe.com/2006/flex/mx/internal::faultHandler()
  at mx.rpc::Responder/fault()
  at mx.rpc::AsyncRequest/fault()
  to NetConnectionMessageResponder / channelFaultHandler)
  at flash.events::EventDispatcher/dispatchEventFunction()
  at flash.events::EventDispatcher/dispatchEvent()
  at mx.messaging.channels::AMFChannel/statusHandler()
  
  
  Please suggest any solution / reason for this.
  
  Thanks in advance!

  Issue seems to be (temporarily) resolve to increase the time-out period for the application server for the duration of the request.
  Permanent solution is optimizing SQLs & reduce response times.

• Videos YouTube channels open under playlists. Is the fault of this Firefox?

  I recently downloaded Firefox because of problems of Shockwave Flash with my old browser. Unfortunately, all the videos of YouTube channels open as a reading list... Which is more annoying than the problems of Shockwave Flash. This is a feature of Firefox, or YouTube work differently on Firefox? I can change it, or if I should get another browser?

  Hi Lazs1,
  In your url from youtube.com you notice it at the end of one of the URL: "& list =" this AutoPlay? It should autoplay if she does that, but not if it is not included in the url.

  Do you have an example url where this happens?

• Log on to the fault: "the user profile Service service has no logon. User profile cannot be loaded.

  have a 610 Compaq with Vista Business - can not log - message reads "the user profile Service service has no logon. User profile cannot be loaded.

  have a 610 Compaq with Vista Business - can not log - message reads "the user profile Service service has no logon. User profile cannot be loaded.

  ·                        Restore point:

  Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

  Try a restore of the system once, to choose a Restore Point prior to your problem...

  Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.
  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  If the above does not work:

  ·                        http://www.Vistax64.com/tutorials/130095-user-profile-service-failed-logon-user-profile-cannot-loaded.html

  See if the information in the above tutorial will help you.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  http://windowshelp.Microsoft.com/Windows/en-AU/help/769495bf-035C-4764-A538-c9b05c22001e1033.mspx

  Difficulty of a corrupted user profile

  After creating the profile, you can copy the files from the existing profile. You must have at least three user accounts on the computer to perform these operations, including the new account that you created.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  http://support.Microsoft.com/kb/947242

  A temporary profile is loaded after you connect to a Windows Vista-based system

  See you soon.

  Mick Murphy - Microsoft partner

• How to create a script for the name of the channel to take and insert text on profile in CS5

  I am a silkscreen and I print my Photoshop starts. I regularly work with multi channel files or RGB files with additional color channels. I created actions to place check marks, resize images, etc. to be ready to print manually but I create for each display text labels, if they are absent from the original work.

  
  

  The files I work with have named pipes as "basic white, red, green, blue 284" etc. which indicates the color of the ink. I want to be able to do is create a script that copies the text of the channel name and insert it into a separate or each/all channels to the top of the file, so that when I print every positive there is a label corresponding to the color of the ink.

  
  

  I don't know if this is even possible, and I am limited in my knowledge when it comes stock and no experience with scripting and have had pretty good luck in the past for actions to do what I want without unnecessary steps.

  
  

  On my target action registration, it creates a new channel with each individual reg mark then combined in a separate channel in which I just copy the contents and select all channels of ink and fill with black to make them appear, I am happy with the steps that must be that it is not too complicated and if it could do the same with labels I would be happy with that.

  
  

  Thanks in advance!

  Something like that?

  // the color used for the text
  var black = new SolidColor();
  black.rgb.hexValue = '000000';
  // set this to space the labels
  var horizontalOffest = new UnitValue(20,'pt');
  var doc = app.activeDocument;
  var currentLayer = doc.activeLayer;
  var textLayer = doc.artLayers.add();
  textLayer.kind = LayerKind.TEXT;
  // font requires the postscript name of the font
  textLayer.font = "ArialMT";
  textLayer.textItem.size = new UnitValue(9,'pt');
  textLayer.textItem.justification = Justification.RIGHT;
  // set the position for the text. this sets to top right corner of the channel
  // here it is set so the text baseline ends  40pts from the right edge, 15pts down
  textLayer.textItem.position = [new UnitValue(doc.width.as('pt')-50,'pt'),new UnitValue(15,'pt')];
  textLayer.textItem.contents = 'label';// temp label string
  
  for(var channelIndex = 0; channelIndex		   

• There is a special token that I can put in a column of the CSV file recovery channel which implies approval of the current value?

  Versistand version is 2013 sp1.

  I use stimulus CSV expressions in my sequence in real time and want a channel to keep its value current (last) until a certain time. Is there a way to do this?

  Stimulation CSV file example:

  timestamp, chan1, chan2

  0,0,

  10, 1,

  20,1,5

  30,2,10

  In this example, chan2 would retain its current value until the timestamp 20.

  Is it possible to implement this feature?

  Kind regards

  Rick Howard

  Thank you! It is a valuable feedback. I can't think of a way to do natively with the functionality of reading CSV for sequences in real time. Some thoughts on how this can be done:

  1. create your own utility to sequences of script based on a CSV file in real-time. Extend the functionality of having a special marker in a cell which designates not only to change the value for the channel as timestep. Do not start from scratch. This tool open source and this one the two script of sequences in real time and stimulation of reading profiles based on data sets (although in different ways).

  2. with the help of software without insertion to the fault of the string value that you want to keep the initial value for the first X seconds of reading the CSV file. For example, you could play another sequence with your CSV file at fault the channel at its current value so that reading CSV does not replace the value.

• the substitution of variable in the profile of stimulus Editor

  Hi all

  I want suggestions on how to do it.

  So I put the system definition for one of the signals as model Output1--> channel 1--> PXI FPGA AO1 user

  Generally, the model output has controls the FPGA. However, I would like to substitute the output signal to another value to test a few flaws. I tried to substitute in the profile of stimulus Editor, but it would not work (for obvious reasons). I wonder what I can do to substitute the value of another signal that remove the mapping of model output 1 for channel 1 user whenever I want to test this fault.

  Thank you.

  Great question!

  If you use the new editor of profile of Stimulus in 2011 VeriStand, you can perform insertion for lack of software of a sequence in real time using a set of special functions, fault, and clearfault. Fault function allows you to activate a software problem a specific parameter is mapped to a string of system definition (condition it is faultable) to a specified value. This replaces any source can have this channel mappings. To clear the fault of software, call clearfault on the service.

  You can call these functions directly from the Expression. Here is some help on these and other features, you can call in a detailed sequence.

  For example, imagine that you have the following sequence and ao0 parameter is mapped to the string of PXI FPGA AO0 system definition. This sequence when run would fault the AO0 PXI FPGA channel to the value - 10.0, wait 5 seconds, and then clear the fault on AO0. If the fault is active, all mappings are substituted, and any attempt to set the channel failing of the workspace will also fail. When the problem is resolved, any source mappings will affect again.

  IMPORTANT NOTE: There is a bug in VeriStand 2011 which prevents a sequence of faults in real-time completely a channel if no other channel is currently failing in the system. The solution is to open the software tool Fault Manager of the workspace and the fault of some channels dummy, as a channel not used user, before running your sequence.

  • MySequence.nivsseq
  
  
  • Parameters
  
  
  • AO0
  
  
  • Code
  
  
  • Setup
  
  
  • Main
  
  
  • Expression: fault (ao0,-10,0)
  
  
  • Expression: Wait (5.0)
  
  
  • Expression: clearfault (ao0)
  
  
  • Cleaning

• Ramping blamed the parameter in the profile of Stimulus Editor.

  Hello

  I am trying to familiarize themselves with the new Stimulus profile editor and encounter a problem I don't know how to solve.

  I have a model-driven setting. In one of my unit tests that I want to make a mistake on this parameter and the fault should scale the value exactly as the ramp function.

  I can do this within the profile of Stimulus editor himself or how can I do?

  / Johan

  You can do this with a custom real-time sequence. The easiest way would be to make a copy of the sequence of integrated ramp and modify it slightly to a fault of the parameter output instead of a simple assignment. You can open this sequence simply by double clicking it in the palette in sequences. If you open the sequence in real time of the ramp in the standard library, you will see the line where he attributes the current value of the ramp to the output parameter:

  RampOut = (I * Increment) + InitialValue

  All you have to do to change this from a standard to a fault assignment as assignment follows:

  fault (RampOut, (I * Increment) + InitialValue)

  Note there is a bug in the VM of real-time sequence that could not completely error a channel of the system unless another channel is currently failing. The easy solution is to create a dummy user and fault channels it in Manager fault channel of dialogue for the duration of your test.