the substitution of variable in the profile of stimulus Editor

Similar Questions

• frequency sweep performance in the profile of stimulus Editor

  Hi all

  I am trying to understand what is the best way to do this.

  I have an output signal. I want to start with a 5V signal, so I want to do it in a sine wave of amplitude of 0.05v starting at 1 Hz and gradually increase the Frequency, squirt up to 500 Hz. I know there is a sinusoidal wave function in the profile of stimulus Editor, but he seems to want to keep the fixed frequency.

  Thank you.

  There are a few options:

  1. your own sinewave sequence that will sweep the frequency while he plays. The integrated sine wave function is just a sequence that you can view and copy edit however you want. Double click in the palette to view the sequence.

  2 use multitasking and the sequence of the sinusoid built-in. The sequence of SineWave takes in a setting for the frequency, but it takes the value by reference. This means that if the value mapped to the frequency parameter changes so that the sine wave sequence runs, the frequency of the sine wave will update, too. This allows you to use a multi - load to run two parallel tasks: to call SineWave and one for the ramp of the frequency variable.

  Attached, is an example to help you make sense of it. Maybe it's not the exact logic you want, but should help you get some ideas going. I hope this helps!

• Ramping blamed the parameter in the profile of Stimulus Editor.

  Hello

  I am trying to familiarize themselves with the new Stimulus profile editor and encounter a problem I don't know how to solve.

  I have a model-driven setting. In one of my unit tests that I want to make a mistake on this parameter and the fault should scale the value exactly as the ramp function.

  I can do this within the profile of Stimulus editor himself or how can I do?

  / Johan

  You can do this with a custom real-time sequence. The easiest way would be to make a copy of the sequence of integrated ramp and modify it slightly to a fault of the parameter output instead of a simple assignment. You can open this sequence simply by double clicking it in the palette in sequences. If you open the sequence in real time of the ramp in the standard library, you will see the line where he attributes the current value of the ramp to the output parameter:

  RampOut = (I * Increment) + InitialValue

  All you have to do to change this from a standard to a fault assignment as assignment follows:

  fault (RampOut, (I * Increment) + InitialValue)

  Note there is a bug in the VM of real-time sequence that could not completely error a channel of the system unless another channel is currently failing. The easy solution is to create a dummy user and fault channels it in Manager fault channel of dialogue for the duration of your test.

• Is it possible to review the profiles of Stimulus for NIVS2009 offline?

  I have a system inherited from NIVS2009 I need to become familiar with before the conversion to the NIVS2010. I need to see a complete list of Stimulus profiles. It is very inconvenient in the pulse generator in the workspace. If I could cut and paste into a txt file would be sufficient, but it does not seem to allow. Is it possible to export or view files .et1 for review?

  Thanks in advance for any input.

  Yes, Mr President, it is.

  In the getting started window menu bar has an entry that offers transfer.

  The name is a little misleading because we say: Mutat Workspace and the definition of system files. Go ahead and run it and you will see a drop down menu with many more options.

  Thank you

  Tom

• Update of Stimulus Legacy profiles to new editor-in-Chief

  Hello world

  I am currently working on the update of a testbed of Veristand 2011 to 2015 SP1. On the bench that we have a lot of Stimulus profile files that were created with the profile of Stimulus editor inherited.

  Is it possible to update the profile of current stimulus editor files and keep their use?

  By looking at the files, I know they are XML, but for some reason, they are completely different formats. It should be possible, however, the translation from one format to the other quite easily. I'm not saying that's what I'll do, just that it is possible.

  See you soon,.

  Pete

  There is not a conversion utility. Here are a few points to note:

  1. the stimulus inherited profile editor is always delivered with 2015 SP1. You can continue to run the same tests in the new version without converting them. New projects by default will not have this tool in the Workspace menu, but you can add it.

  2. If one of your tests is to read CSV files, the same format works in the new Stimulus profile editor.

  Please let us know if there is a particular reason that you want to convert the files to the new format if the notes above don't help you. Who could help us understand a good path for you!

• Profile of Stimulus call API Veristand leads do not have test

  I wan´t to call a stimulus program profile file. I discovered that there are no VI to do this in the API of the LabVIEW VeriStand (for the profile editor of stimulus inherited such a VI exists). But in the example finder is a VI that uses the API .NET VeriStand Edifier present (http://forums.ni.com/t5/NI-VeriStand/Start-Stimulus-Profile-from-LabVIEW/m-p/1789162). Furthermore, someone created a custom control for the workspace that uses this .NET invoke (http://www.ni.com/example/31335/en/). Two examples of work in general, but I have a problem that I m not able to fix:

  If I use a step of "update model parameters of a file" in the profile of stimulus to change the parameters of a model of the step will fail with the error: ' error:-307650. '. Details: object reference not set to an instance of an object. "This only happens if I use the API of VeriStand .NET managed to call the profile of stimulus. If I start the stimulus of the profile editor profile stimulus this doesn´t error occurs and the update of the model parameter works properly.

  If I delete the step of "update model parameters of a file" the whole stimulus profile goes very well.

  Anyone an idea how to solve this problem or how to call a stimulus with the API VeriStand profile file programmatically? Thanks for your suggestions in advance and have a nice day.

  H.

  I can reproduce what you see. You can very quickly get around this by making a call to the method of StimulusProfile CheckForErrors before his execution. This method is called by the Publisher of profile of Stimulus until it starts to run, and he must have some side effects which causes the update settings not work properly.

• Is it possible to apply the profile of variable width to the marks left by the form of task?

  Task form is selected.
  
  After having applied a blow on the work plan - the race of properties appear in the toolbar and are by default "uniform" for the layout Variable width profile.
  
  I select the profile second on the list.
  
  And draw another path.
  
  Yet, the same uniform contour.
  
  I realize that the form of the task creates a form shows - but surely there is always a "path" that is used initially to save the race. A Variable width profile cannot be applied to a Blob brush stroke?
  
  Why would I do this? I want to be able to sketch quickly, make the design of the characters and have a single shape to export Flash as a symbol of the head, etc.. I could use the tool brush and then object > path > terms of contour, and then use the Pathfinder Panel for unit all the traits described together form a compound... but it's too disruptive to sketch...

  If you want to create a blob brush object (with a match nil) less boring then a fat less then straight then double-click on your blob Brush tool icon and tweak the settings...

  G

• return on investment for the profile line variable

  Hello

  I built a vi with vision assistant, where the profile of a single horizontal line is included. If the acquired image had the X, Y coordinate system, I want to extend the vi so that it updates all possible horizontal lineprofiles (X 1/Y0 to X 1/Yn) line (Y0/Xn to Xn/Yn) in this order. So I have to vary the return on investment (line), but how is this possible? I have no experience in labview, so it's hard for me with the data of different types and functions.

  Thanks for help

  Hi Blue12,

  You may not need to create a return on investment for each line. You can get information on line directly with "IMAQ-profile line. You can directly enter the coordinates of your line and out of the profile.

  Please save yourself frustration and get LabVIEW training before attempting to implement applications.

  Best regards, Topper

• Can I have the Profile Manager uses the name of the device used when the placement of placeholders?

  Can I have the Profile Manager uses the name of the device used when the placement of placeholders? Currently, all get renamed 'iPad' when the device through DEP configuration.

  No, but

  I was putting new devices in groups of temporary devices and renaming in bulk, once they are configured for the user, by using user variables / unit...

  The other annoying problem would be the user modifies the device name when they connect it iTunes...

  • the %destinataire% email - address email (the EMailAddress attribute)
  • first_name % - first name (FirstName attribute)
  • full_name % - full name (attribute RealName)
  • % of guid guid (GeneratedID attribute)
  • last_name % - last name (the LastName attribute)
  • the title of the post (the JobTitle attribute) %

  -% mobile_phone % the number of mobile (laptop attribute)

  • short_name % name run (the RecordName, generally the name of the account attribute)

  The variables of the unit are:

  • % BuildVersion % - full OS version on the device
  • ICCID % - ICCID (from the SIM card)
  • IMEI % - IMEI (International Mobile Equipment Identity)
  • OSVersion % - common version number of the operating system of the device
  • ProductName % - name of the product
  • SerialNumber % - serial number
  • % WIFIMAC %-MAC address of the WiFi interface

• How to export the list of devices in the Profile Manager?

  Hello

  is there a way to export the list of devices in the Profile Manager on a mini mac running OS Server 5.3?

  Thank you

  How to export data from device in the Profile Manager

  How to export a list of devices and their info?

• Try to spend XP to W10. Tried to copy the content of the profile (IE not the profile itself) immediately after installation but no joy.

  Try to get an old laptop XP to a new computer laptop of W10 thunderbird.
  Located existing profile and backed up on external hard drive.
  Thunderbird installed on W10 and before breakfast copied the contents of the old profile folder to the profile under AppData/Roaming/Thunderbird/Profiles/profile.default folder
  Launch thunderbird and it does not recognize the profile, it is as if she is trying to set it up from scratch.
  Then tried to create new profile and copying the contents of the old profile of XP, but it did not work.
  Then looked at the Add-ons, but the lightning it is not present, so could not remove it.
  Any other suggestions?

  C:\Documents and Settings\Fraser\Local Settings\Application Data\Thunderbird\Profiles\elvh5ttl.dfault

  This is not the path of the correct profile for XP.
  Check this article and make sure that really copy you the profile folder.
  http://KB.mozillazine.org/Profile_folder_-_Thunderbird#Windows_2000_and_XP

  I do not understand why you created a second profile. With two profiles, you must always be careful to start Thunderbird with the right profile.

• Where is the profile located in El Capitan?

  I can't find the profile folder, or all records related to Thunderbird after installing under ElCapitan! 10.11 even supported at this stage?

  Hello

  You should be able to find your Thunderbird profiles folder by;

  1. In Thunderbird, go to help, troubleshooting information
  2. In the window that opens, in the title of the Basic application, click on the button record show , next to the profile folder.

  This will then open the profile for Thunderbird folder in your operating systems management Viewer.

  I hope this helps, but if not, please come back here and we can look at another solution for you.

• Can W7 \64 bit\FF42.0\How I move the profiles?

  Everything seems to work perfectly. But I realized that I should be able to find how to move my profile to another drive on my computer somewhere in the profile itself. I've looked everywhere I can think of and can't find this info. If you can tell me where it is, maybe I can manage. But if not, can you tell me how to move the profiles? My os is Windows 7 Pro 64 bit. I am running Firefox 42.0. Your guesses are all correct, except that I'm not sure about the plugin from Adobe. Thanks for any help.

  You can use the Profile Manager to create a new profile on a different hard drive folder by clicking on the button "choose a folder.
  Be sure to select a new empty file and not a folder that already contains files.

  You can transfer files from the current profile folder to this folder.

  • https://support.Mozilla.org/KB/recovering+important+data+from+an+old+profile
  • http://KB.mozillazine.org/Transferring_data_to_a_new_profile_-_Firefox
  • http://KB.mozillazine.org/Moving_your_profile_folder

• Why can't change my email address in the profile change for communities?

  Why can't change my email address in the profile change for communities? I won't be able to get the email with the former in the future.

  Because the e-mail address is connected to your Apple ID, which is used to connect to the CSA. You must change the Apple ID.

• I had to reinstall Windows - problems accessing the profile of old or existing to show all emails, I had

  I had to reinstall windows. I have several drives in my computer and I copied the entire C: drive to another drive in the PC. I thought when I reinstalled Thunderbird, I could just point to profile located on the other drive... email accounts but it doesn't work.

  I had multiple accounts configured in Thunderbird - accounts about 6, but just one profile. I had several records created for organizing email locally. So, I guess that he should be a both local and roaming profile with the same name? I checked my mail server web interface and there are currently approximately 105 emails on this subject. I know there are at least 500 total emails into the inboxes of Thunderbird. I try to restore those old e-mails, as well as local folders - but am not having any luck.

  Anyway, with all the attempts that I did to get all the emails of my return, I think that Thunderbird has created new folders and is doing really complicated now. I don't know how to sort this out. I don't know the name of the profile that I have used before, and when I search my computer on the name of the profile, it is 22 000 + items. I'm still not able to get them all restored in Thunderbird.

  Another strange thing is: in the search results for the name of the profile, the items are displayed in the results, and it has an icon Thunderbird next to them and says it's a Document of Thunderbird... but when I double-click on one of them, it will not open in Thunderbird. Nothing happens when I double-click on them. Could this be a problem/conflict version of Thunderbird? I thought my old Thunderbird was updated.

  I don't know where to start to give you a hint how to help. I'm sorry.

  Any ideas?

  http://KB.mozillazine.org/Profile_manager#Windows