Similar Questions

• How disable (reverse) ui icon, a user interface for the production of coding / engineering mode

  Excuse me

  I'm coding a sample UI on LabView8.2

  full function be activated in the user interface, and engineer can adjust the factors through the UI program

  now, I want to classify the mode of production and engineering for the user interface

  the engineer mode - enable full function of engineering change

  mode of production - only activate a small function for the operator to change

  I hope not coding 2ea program, I hope use example of process to achieve

  so...

  I want to builld a UI for the mode of production

  Have disable (reverse) Labview technic?, let icon convert 'gray'---> disable

  the user can see the icon on the user interface, but they cannot resolve the factors of function

  Thank you

  "2ea program."

  "disable (reverse) technic?", let icon convert 'gray'---> disable

  I don't know what some of the terminology is that you use.  Or what you mean by disabling functions or icons.

  I'm going to guess that you really want to be able to disable and gray to controls on the front panel.  You can write to a property node for each of your orders of façade called 'off '.  You can activate, deactivate and disable/gray.

  

• I'm trying to set up an Ad Hoc network, but there is no option for the Ad Hoc network configuration when I go into the network and sharing Center.

  I looked at how to make a point of my computer because I have a usb wireless internet device for my laptop and I tried to get an ad hoc network setup but there is NO option for the CONFIGURATION of the NETWORK AD HOC when I go to network and sharing Center... what should I do?

  original title: ad hoc isn't here...

  Hi NickBean2,

  You can refer to the following articles and see if it helps.

  Set up a computer-to-computer (ad hoc) network
  Solve problems, find wireless networks

  Hope this information is useful.

• Desktop Dell XPS 8500 - complete Instructions for the necessary Raid 1 configuration

  Hi, soon I will get this system and it consists of the 256 GB ssd for the OS, etc and has 2 GB SATA for data. The ssd has his own connection to the Board of Directors and that leaves "2no" 6 GB/s & 2No / 3 GB/s sata ports on the card. The OS is windows 7 ult, but I don't want to use software raid.

  I bought a 2nd disc identical sata hard and want to configure hardware raid 1 for data. I am assuming they will be connected to the 6 Gbps ports because there will be 2 optical drives that I hear are connected to ports / 3 GB/s

  Can anyone provide a step by step instructions regarding the implementation of raid 1 as soon as I get the computer. It will be used until I have set up the raid. If you can try to fool it would be great (for example I have to disconnect the ssd before setting up the raid, the new sata drive has to be formatted first, etc?)

  I'm sure support Dell can instruct me on how to do it, but I am usually able to do minor hardware upgrades and have done things as OS reinstalls before so I don't know with a clear set of instructions, it should not be too difficult!

  Thanks for any help you can give

  There are two processes that allows to set up a RAID.  The technology Intel Rapid Storage Technology console and the Intel Option ROM RAID configuration utility.  Intel recommends using the console of RST on a system that already has Windows installed and working, but I do not know why the RAID configuration utility could not be used as long as the system drive must not be included in the RAID.

  If the RAID configuration utility is used, you end up with an empty RAID volume that must be partitioned and formatted as any hard drive, you add to the computer.  This is done by using the disk management application.  If the RST console is used to migrate RAID from a drive with data on it, the RAID created will have the same structure that we find on the disc for the migration, so partitioning and formatting would be necessary.

  To use the console of the RST, consider this: Intel Rapid Storage Technology User Guide.  Article 8 contains information specific to your goal.  The document also covers the RAID configuration utility, however, so it would be a good idea to consult the entire guide.  The computer must have the RAID mode is enabled before attempting to set up a RAID.  The guide gives a 'how', but remember the screens shown are for motherboards from Intel which differ slightly from the version of Dell.  The guide also provides information about using the RAID configuration utility.  The biggest difference between the use of the console of the RST and the RAID configuration utility, the Setup utility doesn't allows you to move from an existing drive.

• Channel Express for the B2B and ARM

  Hello

  Can I use the same pair of expressways (exp - e and exp - c) for remote access business-to-business and mobile?

  Or do I need to use a pair for B2B and another for ARM?

  The warnings?

  Kind regards

  Christos

  The same pair of Core Expressway and Edge can be used for Business-to-Business and access to remote Mobile.

• Isolation of the Local AppData%\Temp folder mode

  So I have a need to change the mode of insulation in the temp folder to: merger, however, even if I have the correct file #Attributes.ini in the Temp folder and rebuild the package, files created in this folder are always get isolated.  Anyone else experience the same thing or am I missing something?

  There is a macro for this location, %Temp%.

• No access by browser for the program of installation/configuration AG300

  I tried to enter the web interface for my AG300.

  I get the "Problem loading Page" dialogue - the address has not been changed default 192.268.1.1

  So far I tried in Windows & Ubuntu and Firefox, chrome and explore. I have sone a rest hard and restarted it and the computer several times.

  If I ping this address there are no results, but I'm obviously an internet access.

  Happy to take more advice, thanks in advance.

  because you cannot cascade two NAT routers and even IP addresses. You must configure the Netgear to communicate well with the AG300.

• Justification for the page in Live View mode is suddenly disheveled

  http://toohotpepperssalsa.com/contact.html

  I tried to change the height of the line from 25 to 20 and out of the cell padding at the top and bottom of the table and OUCH!  Back, I changed the height of line at 25, I did something wong in the setting and I can't use the program for a new site with the messed up setting yet.  I tried to create a new site and so I could copy the content but that did not work.

  The page went suddenly to the right and the horizontal vertical menu first.  When I have it in DESIGN mode, it's good, but when he LIVES DISPLAY or published, he screwed up.

  Help, please.  I hurt at the head of many years and am doing it for my daughter-in-law.  THANKS for any help you can give me.  I tried to go through settings to check, but did not get anywhere.

  On line 17 of style.css, take a look on the highlighted

  {#layout}

  Width:0px;

  text-align: justify;

  line-height:25px;

  Background: url (.. / images/layout.gif) top left no-repeat;

  71px of padding: 0px 0px 76px;

  margin: 0px auto;

  }

• 4580 for the computers and wireless configuration

  Hello

  I just picked up my new 4580 Photosmart out of the box and think that I may have a problem.  Although I understand that the device works wirelessly OR via USB, I thought that it would support my config which is two PC wireless (laptop & netbook) AND my office that is connected via a cable to my wireless router.  I undestood what I could connect to the 4580 via the wireless router, but looking at the instructions I'm afraid that this is not possible.

  I would be grateful if someone could put me right before I waste hours trying to congure something that would never work!

  Thank you in advance.

  Ctesias

  Any PC connected to the same network as the printer can use. Simply follow the instructions to install the printer wireless, and there should be no problem.

• Managed review secure Channel before taking the course... can I still get emerit?

  Hello

  I recently took and passed the VCP 310 FRONT to register for the certified course exam.  I got an ID VCP Pearson VIEW when I joined the review and now I would like to take the class needed to become fully certified.  So my questions are the following:

  1. is there a problem with the first of the exam and the class of a second (depending on the certification page VMWare he States simply that you must have once the review and a class to be approved, but don't not specify that one is one prerequisite for the other so I guess as long as you have both, then any order that you do)?

  2. How do I link my ID VCP ACROSS Pearson during registration to review so that I get credit for both.  I have an account to connect to the Pearson VIEW to access their site, but I can't seem to use for the login and password for the site of VMWare.  I want to make sure that I did not test for nothing and I get full credit for all this hard work.

  3. is there a time limit that the review is good for before you take the class... in other words, the available class I take in my are is not until March, which is 2 months from the date I took and passed the exam.

  Advice or information would be greatly appreciated, as I've worked at length and seriously take this test and do not want my efforts to get lost.

  Thanks in advance,

  Chris

  Congratulations on the exam!

  (1) there is no problem take the class after you have passed the exam - VMware prefers the class before the exam, but many people did this way

  (2) certification VMware should be able to relate the test and the class, but safely when you are finished her email certification VMware ([email protected]) with the ID of the secure Channel be received from Pearson/VIEW and ID of the class, the class dates, location and the name of the VMware authorized training center if you took it through ART and this will ensure your certification.

  (3) there is no official deadline but VI-4 will be out some time this year and if VMware follows what they did with ESX 2/VC1.x class about 9 moths after out general, that the class will not be

  available - also note that 3 VI - 3 classes will qualify for the VCP - install and configure, deploy, Secure and analyze (DSA) and fast-track

  If you find this or any other answer useful please consider awarding points marking the answer correct or useful

• Look for the string of the numbered array element.

  This is my first post, so I'll probably miss one thing or another.  I will look nothing missed as soon as possible. I write code LV to test additional County stored in a CSV text file. Counties represent the stimulated current of a diode in a beam of radiation. The product is a QA device for a medical radiation treatment machine. The Integrator output proportional to the current diode accumulates as a whole into account in the text file. My LV code puts the numbers in the tables, calculates the incremental time derived and analyzed statistically. Numbers of the columns in the table data represent unique components. Default number of data column is sorted in a 1 d table has no column number. As if not column 10 represents CR39 of PCB 11. I need an algorithm how to connect a string such as CR39-PCB11 to the element of the array 1 d failure or relate to the string to the column in the data table that fails. Could you suggest a way to do this?

  If I understand you correctly, instead of these numbers that are in the Updates (odd) 'zero', you want to get premium channels. For the moment, the operator uses a lookup table, to find the chain (component) that corresponds to the column number.

  It's easy, because you only need an array of strings (corresponding to the column number 0 n) and use the array index with the index of the column. Place it in a loop for get all the clues of failures (the loop autoindexing for).

  Felix

• Configuration of the basic Source of time to master for the 9234

  I have several cDAQ modules I use to collect data.  I use vi to Write can Express to save data to a file of PDM.

  When you examine the recorded data files, the measured data from NI 9215 provide pleasant timestamps to match how the DAQmx task has been set up--delaying the sampling frequency of 1000 with a 1 ms in the While loop.  However, although in the same vi - different tasks, but the same while loop - horodateurs of the NI 9234 do not correspond to the task of DAQmx implemented - sampling frequency of 1000 with a 1ms delay. After reading the material provided with the NI 9234, I found that maybe the machine clean master Timebase Source. There were documents that says he can be configured to be originally of Timebase of Master for the other modules:

  Configuration of the basic Source of time of the master for the NI 9234 (Interface FPGA)

  It is desirable to have the timestamps for data measured across all modules to match. We do not have the FPGA Module for LabVIEW. Is there a method in LabVIEW for all modules use the same master time base Source?  I assumed that because all the data collection has place in the same while loop by using the time delay of 1 ms it was forced through the code. This hypothesis seems incorrect from my review of the PDM data files.

  The NI 9204 provides a trigger only.

  Software:

  Windows 7

  LabVIEW 2010 SP1

  Material:

  CDAQ-9174 chassis

  Slot 1: NEITHER 9204

  Slot 2: NEITHER 9215

  Slot 3: NEITHER 9234

  Slot 4; Vacuum

  Hi MgDAQ,

  An important concept to note is that the 9234 uses a delta-sigma converter and a clock of oversampling to read analog data. There is an inherent delay of entry due to analog and digital filtering built-in. Since the 9215 has a lower resolution there will be a lag the 9234 and 9215 finished. I've included some resources below:

  What are the for the NI 9233, NI 9234, and NI 9237 valid sampling rates? : http://digital.ni.com/public.nsf/allkb/593CC07F76B1405A862570DE005F6836?OpenDocument

  
  

  Synchronization of DSA, S and X series devices with a NEITHER-DAQmx single task series: http://digital.ni.com/public.nsf/websearch/78E44565FD87E7D686257108007F94F8?OpenDocument

  
  

  Synchronization with NOR-DAQmx of acquiring dynamic signals (DSA) products:http://digital.ni.com/public.nsf/allkb/A133ED27DF9BCC5986256F2E004BA342?OpenDocument

  Have you tried to put two modules in the same spot? Alternatively, you can export the sample clock 9234 and tasks installation separately.

  Best,

  CARISA

• Where is the log file for the configuration of the plugin to a vco part?

  Hello

  I have a vco plugin that has a configuration interface, basically, everything works fine, but I can't find the logs for the purposes of Web configuration. I thought that newspapers could be found in Server.log (in my case, the exact path is C:\Program Files\VMware\Infrastructure\Orchestrator\app-server\server\vmo\log\server.log) but they were not there.

  I checked a few other plugins vCO well known as the SSH plugin, but I can't find the newspapers for his configuration interface, either.

  Can someone let me know if I'm looking the wrong log file? Thanks in advance.

  To the vCO 5.1 you can check in {vCO_INSTALL_FOLDER}\configuration\jetty\logs\jetty.log

  And log4j.configuration I think is in {vCO_INSTALL_FOLDER}\configuration\jetty\resources\log4j.xml

• Best practices for the collection of network adapter for network management

  Quote from http://www.vmware.com/files/pdf/techpaper/VMW-Server-WP-BestPractices.pdf :

  Aggregation and network management networks:

  To set up a team of network for the management network adapter, configure the network adapters in the vSwitch
  configuration of the ESX/ESXi host, for configuration active / standby.

  The vSwitch must be configured as follows:
  The load balancing • route = based on the original (default) virtual port code
  • Restore = 'No '.
  • vSwitch0: two physical network adapters (for example: vmnic0 & vmnic2)
  • Two groups of ports (for example, vMotion and management)

  In this example, the management network works on vSwitch0 as active vmnic0 and watches over vmnic2.
  The vMotion network works on vSwitch0 as active vmnic2 and watches over vmnic0.

  My configuration:

  The two active adapters (not active / standby)

  Failback = 'Yes '.

  Not clear if the network management and vMotion are both active on the same vmnic or different.

  Question:

  Is smart enough to keep the network management and vMotion on different vmnic SE to ESXi 4.1 or I should change to active / standby config and make sure they are on different vmnic?

  It would make a noticeable difference?

  Ah yes, you are right in your configuration then.  I would never mix NIC vendors in any type of trunk, I saw things get funky now and then.  VAAI won't give you an advantage when you do a storage vMotion, normal vMotion will always use the same amount of traffic, because memory cards must always be copied between hosts.  It is advisable to devote at least a card NETWORK management and at least one NETWORK adapter to vMotion, if you can have two vSwitches with two NIC each then I would use explicit order of failover you mentioned.  Hope that helps!

• Unable to access role to change the settings for the virtual Center

  Hi all

  I recently created two new roles to restrict the Active Directory in Virtual Center security group and the Resource Pool. I cloned VM Administrator role and tweaked so that this group can view full data center while being only able to create/delete the virtual machines in the resource pool. However, I can't work on what permission setting would completely restrict the role of access and changes to the "vCenter Server Settings" on the home page.

  Can someone please help?

  Virtual Center: 4.0.0 (Build: 208111)

  Thank you

  Fadi

  That sounds right.  roles and rights spread from host/cluster view for the sake of server configurations.

  If you set the role to the next level in vCenter 4 (which is the name/IP of your vCenter), they will have access to it.

  You can define a low level (data center), then define non-role or nothing at the top level.  you will need to place this permission/role on each object in the data center, you have for each of these connections.

  Kind regards

  Jonathan

  B.SC., RHCT, VMware vExpert 2009

  NOTE: If your question or problem has been resolved, please mark this thread as answered and awarded points accordingly.