check availability
Hi guys, there is a way to check the availability of an item in same form Salesorder I did not put any quantity. I want it is after I made the point then hit tab, then I would see how much I have in my inventory. How can I do?
(if possible "I think it's possible")
A doc of what I did in a test system is attached. The function will have to be modified to display the data you want from the table of relations article.
Tags: Oracle Applications
Similar Questions
-
set ip next-hop check availability
Hello
I need to know in what circumstances to use (ip next hop set check availability) by the ACB.
Please correct me if I'm wrong that even if I use the command (set ip next - hop) to instead set ip next-hop check availability inside
map of route and next hop is not accessible, then will be the normal routing table. So why I need to use (the ip next hop value check availability)
and under what circumstances.
Hello
even if I use the command (set ip next - hop) instead of set ip next-hop check availability inside the map route and next hop is not accessible, then will be the normal routing table.
not necessarily.
If the next hop is accessible through an interface (for example a LAN VIRTUAL) multiaccess, State of the multiaccess interface cannot change to back down when the next hop becomes unaccessible. The ACB router then try to resolve the next hop (ARP) for always instead of using the normal routing table.
Rolf
-
No matter what car the spell checker available for FM 9 part 3
No matter what car the spell checker available for FM 9 part 3
I used Asustype from Fanix product successfully with older versions of FM.
-
Satellite Pro 4200: is a Toshiba Software to check available HARD disk?
Hello
My 4200 Pro Satellite got too hot and the hard drive was struck by who (scandisk stops at 84%, very slow data access). Is there any available Toshiba Software with which I can check the HD and get a diagnosis?
Thank you
BenHi Ben,
I'm not aware of any software specific to Toshiba, but you can still use the Microsoft CHKDSK utility to scan and repair your hard disk sectors. You can access this by right-clicking on the drive icon in my computer-> properties-> tools.
Kind regards
-
PHP pages: output error check available and continues to save the page
Hello
I noticed that the error output check (green or red) in the Dreamweaver footer bar (on the left of "glimpses of the unit", "browser preview" and icons 'size of windows') is not available in the pages with the .php extension, .html to.
In addition, Dreamweaver ask me to save the page whenever I change something.
For example, if I use 'commands-> format source' in a .php page, Dremweaver ask me each time to save it to complete this command.
Is this a normal behavior?
I use the latest version, CC 2015 (7714 build), OS X Yosemite.
Thank you
Michele
No, this isn't a bug, it's how DW. DW needs to have the file saved to be able to produce live view, and Yes, it sucks that the characteristics of the Live view mode are lost when in Design mode.
Live view is still in its infancy since Adobe has begun to put the elements in Live view mode. If all goes well, they will see a way to overcome the ongoing pop-up from happening.
Regarding the PHP support, this has always been a minimum feature. If you want a good PHP editor, then there are a lot of options such as
-
Any VPN device checks available with Essentials license?
Can we do anything to verify that a client VPN connection is legitimate beyond just checking AnyConnect is installed and valid user name and password is entered without having to go to Premium and licenses advanced?
For example you can restrict connections to Windows computers that are members of any domain included on the approved list of the Active Directory domains and reject other connection attempts when you use the Essentials license?
Other types of basic customer verification controls that work with Essentials licenses?
Sorry, but the essential (or the most common type of license) does not offer this feature.
You will need to use Premium (now migrated to the Apex licence type) to evaluate endpoints.
You might find this feature guide useful.
-
How to check the availability of the ucs?
Hi all
I have observed UCS alert on my monitoring tool.
Service: System availability
State: OK
HostGroup: Switch
Time: Wed Apr 15 19:10:16 UTC 2014
Additional information: OK: UPTIME = 34 minutes, 11.37But when I connected and checked the availability of the system, it has been for a long time:
System start time: Thu Nov 29 19:17:30 2012
System uptime: 501 days, 18 hours, 46 minutes, 45 seconds
The core run time: 501 days, 19 hours, 25 minutes, 11 seconds
Availability active supervisor: 501 days, 18 hours, 46 minutes, 45 secondsCould you please explain any other command to check availability?
Thank you
Phani.
First of all you need to know what the ip address of each fabric, if you don't know what they are you can connect at UCSM (see screenshot drew)
Once you have the IP for the two fabrics, the IPs SSH and run the following commands to get uptime on every fabric.
F A # connect nxos
F A (nxos) # see the availability of the system
-
5.7 Lightroom will not install on a clean install of Windows 10 Pro 64 bit. "Problem retrieving some files. "Check available space, etc. and the privaleges of Scripture on the destination folder. Worked OK on Windows 7 64 bit. 400 GB of available space. Tried changing the compatibility of Wiindows 8 and 7, but same problem. I am the administrator, so there should be no problem of privileges.
Clear your tmp folder.
Restart your computer
replace.
-
Availability indicates 0% for areas of Peoplesoft
Hi team
We monitor peoplesoft in our Enviornrment application, that together we must show the availability of the Peoplesoft application, is there no way for that, or any what personalised dashboard where we show you the availability of the entire application.
Also when I checked the individual field within the Application, there is a column for availability which still shows 0% which is not true...
Your contributions to this need, we would drift the availability of the application to tell ELM which consists of 3 area like the one above, but all the field 3 shows as 0% availability...
Concerning
Sriram S
Sriram,
I searched the manual of peoplesoft and retrieved the following information to check availability:
Availability (%). Measure the minimum availability of the domain of the global PeopleSoft application server. Availability is based on the minimum number of instances defined for a server process in the .ubb file. If the found bodies are less than Min Instances for any process server within the domain, % uptime equals zero. If the found bodies is equal to Min Instances, % availability is equal to 100.
You can check the number of instances defined for a process server in your .ubb file
Once you have the reports correctly, there are options to account for availability for all available peoplesoft application servers
David Mendoza
Foglight Consultant
-
failure of the preliminary checks for Oracle Real Application Cluster 12 C.
Hi all. Please, help to investigate and resolve. Thank you.
[grid@orac1 grid] $./runcluvfy.sh stage pre - crsinst - orac1, orac2 n - correction-verbose
Conducting due diligence to install cluster services
Audit accessibility of node...
Check: Accessibility of node of the node 'orac1 '.
Accessible destination node?
------------------------------------ ------------------------
orac1 yes
orac2 yes
Result: Check accessibility node from node 'orac1 '.
Verify the equivalence of the user...
Check: Equivalence for the user "grid."
Status of node name
------------------------------------ ------------------------
orac2 spent
orac1 spent
Result: Use CONTROL passed to user equivalence "grid."
Verify node connectivity...
Checking the configuration of the hosts file...
Status of node name
------------------------------------ ------------------------
orac1 spent
orac2 spent
The hosts config file verification successful
Interface of the node information to "orac1".
Name address IP subnet gateway Gateway bat HW address MTU
------ --------------- --------------- --------------- --------------- ----------------- ------
eth0 10.154.137.101 10.154.137.0 0.0.0.0 10.0.4.2 08:00:27:28:D1:1F 1500
eth1 10.154.138.101 10.154.138.0 0.0.0.0 10.0.4.2 08:00:27:51:E8:B9 1500
eth2 10.0.4.15 10.0.4.0 0.0.0.0 10.0.4.2 08:00:27:5 B: D7:29 1500
Interface of the node information to "orac2".
Name address IP subnet gateway Gateway bat HW address MTU
------ --------------- --------------- --------------- --------------- ----------------- ------
eth0 10.154.137.102 10.154.137.0 0.0.0.0 10.0.4.2 08:00:27:7F:C8:70 1500
eth1 10.154.138.102 10.154.138.0 0.0.0.0 10.0.4.2 08:00:27:9 D: 27:D8 1500
eth2 10.0.4.15 10.0.4.0 0.0.0.0 10.0.4.2 08:00:27:6E:92:43 1500
Check: Subnet node connectivity "10.154.137.0."
Source Destination connected?
------------------------------ ------------------------------ ----------------
orac1 [10.154.137.101] orac2 [10.154.137.102] Yes
Result: Connectivity node passed to subnet "10.154.137.0" with one or more nodes orac1, orac2
Check: The subnet '10.154.137.0' TCP connectivity
Source Destination connected?
------------------------------ ------------------------------ ----------------
orac1:10.154.137.101 orac2:10.154.137.102 failed
ERROR:
PRVF-7617: node connectivity between "orac1: 10.154.137.101" and "orac2: 10.154.137.102" failed
Result: Check failed for the '10.154.137.0' subnet TCP connectivity
Check: Subnet node connectivity "10.154.138.0."
Source Destination connected?
------------------------------ ------------------------------ ----------------
orac1 [10.154.138.101] orac2 [10.154.138.102] Yes
Result: Connectivity node passed to subnet "10.154.138.0" with one or more nodes orac1, orac2
Check: The subnet '10.154.138.0' TCP connectivity
Source Destination connected?
------------------------------ ------------------------------ ----------------
orac1:10.154.138.101 orac2:10.154.138.102 failed
ERROR:
PRVF-7617: node connectivity between "orac1: 10.154.138.101" and "orac2: 10.154.138.102" failed
Result: Check failed for the '10.154.138.0' subnet TCP connectivity
Check: Subnet node connectivity "10.0.4.0."
Source Destination connected?
------------------------------ ------------------------------ ----------------
orac1 [10.0.4.15] orac2 [10.0.4.15] Yes
Result: Connectivity node passed to subnet "10.0.4.0" with one or more nodes orac1, orac2
Check: The subnet '10.0.4.0' TCP connectivity
Source Destination connected?
------------------------------ ------------------------------ ----------------
orac1:10.0.4.15 orac2:10.0.4.15 failed
ERROR:
PRVF-7617: node connectivity between "orac1: 10.0.4.15" and "orac2: 10.0.4.15" failed
Result: Check failed for the '10.0.4.0' subnet TCP connectivity
Interfaces available on subnet "10.0.4.0" who are likely candidates for VIP are:
orac1 eth2:10.0.4.15
orac2 eth2:10.0.4.15
CAUTION:
Could not find an appropriate interface for the private interconnection range
Checking consistency of subnet mask...
Verification of consistency for the subnet mask for subnet "10.154.137.0."
Verification of consistency for the subnet mask for subnet "10.154.138.0."
Verification of consistency for the subnet mask for subnet "10.0.4.0."
Verification of consistency for the last subnet mask.
ERROR:
GLWB-1172: the IP "10.0.4.15" is on more than one interface 'eth2, eth2' nodes 'orac2, orac1 '.
Result: Check the node has no connectivity
Checking for multicast communication...
Verification of the subnet "10.154.137.0" for multicast with "224.0.0.251. multicast group communication
GLWB-11138: Interface '10.154.137.101' on 'orac1' node is not able to communicate with interface '10.154.137.101' on 'orac1' node to the multicast group "224.0.0.251.
GLWB-11138: Interface '10.154.137.101' on 'orac1' node is not able to communicate with interface '10.154.137.102' on 'orac2' node to the multicast group "224.0.0.251.
GLWB-11138: Interface '10.154.137.102' on 'orac2' node is not able to communicate with interface '10.154.137.101' on 'orac1' node to the multicast group "224.0.0.251.
GLWB-11138: Interface '10.154.137.102' on 'orac2' node is not able to communicate with interface '10.154.137.102' on 'orac2' node to the multicast group "224.0.0.251.
Verification of the subnet "10.154.138.0" for multicast with "224.0.0.251. multicast group communication
GLWB-11138: Interface '10.154.138.101' on 'orac1' node is not able to communicate with interface '10.154.138.101' on 'orac1' node to the multicast group "224.0.0.251.
GLWB-11138: Interface '10.154.138.101' on 'orac1' node is not able to communicate with interface '10.154.138.102' on 'orac2' node to the multicast group "224.0.0.251.
GLWB-11138: Interface '10.154.138.102' on 'orac2' node is not able to communicate with interface '10.154.138.101' on 'orac1' node to the multicast group "224.0.0.251.
GLWB-11138: Interface '10.154.138.102' on 'orac2' node is not able to communicate with interface '10.154.138.102' on 'orac2' node to the multicast group "224.0.0.251.
Verification of the subnet "10.0.4.0" for multicast with "224.0.0.251. multicast group communication
GLWB-11138: Interface '10.0.4.15' on 'orac1' node is not able to communicate with interface '10.0.4.15' on 'orac1' node to the multicast group "224.0.0.251.
GLWB-11138: Interface '10.0.4.15' on 'orac1' node is not able to communicate with interface '10.0.4.15' on 'orac2' node to the multicast group "224.0.0.251.
GLWB-11138: Interface '10.0.4.15' on 'orac2' node is not able to communicate with interface '10.0.4.15' on 'orac1' node to the multicast group "224.0.0.251.
GLWB-11138: Interface '10.0.4.15' on 'orac2' node is not able to communicate with interface '10.0.4.15' on 'orac2' node to the multicast group "224.0.0.251.
Checking configuration ASMLib.
Status of node name
------------------------------------ ------------------------
orac1 spent
orac2 spent
Result: Check the configuration of ASMLib passed.
Check: Total memory
Requested State available node name
------------ ------------------------ ------------------------ ----------
orac2 GB 5,714 (5991520,0 KB) increased from 4 GB (4194304,0 KB)
orac1 GB 5,714 (5991520,0 KB) increased from 4 GB (4194304,0 KB)
Result: The total past memory check
Check: Available memory
Requested State available node name
------------ ------------------------ ------------------------ ----------
transmitted orac2 Go 5,2293 (5483324,0 KB) 50 MB (51200,0 KB)
transmitted orac1 Go 5,1456 (5395600,0 KB) 50 MB (51200,0 KB)
Result: Available past memory check
Check: Swap space
Requested State available node name
------------ ------------------------ ------------------------ ----------
orac2 GB 6,125 (6422520,0 KB) from GB 5,714 (5991520,0 KB)
orac1 GB 6,125 (6422520,0 KB) from GB 5,714 (5991520,0 KB)
Result: Check the Swap space past
Check: Disk space for "orac2: / usr, orac2: / var, orac2: / etc, orac2: / sbin, orac2: / tmp '.
Path node name Mount point available requested State
---------------- ------------ ------------ ------------ ------------ ------------
orac2/usr / 37,8398 GB GB 1,0635 spent
orac2/var / 37,8398 GB GB 1,0635 spent
orac2/etc / 37,8398 GB GB 1,0635 spent
orac2/sbin / 37,8398 GB GB 1,0635 spent
orac2/tmp / 37,8398 GB GB 1,0635 spent
Result: Free past to check the disk space ' orac2: / usr, orac2: / var, orac2: / etc, orac2: / sbin, orac2: / tmp '.
Check: Disk space for "orac1: / usr, orac1: / var, orac1: / etc, orac1: / sbin, orac1: / tmp '.
Path node name Mount point available requested State
---------------- ------------ ------------ ------------ ------------ ------------
orac1/usr / 32,4382 GB GB 1,0635 spent
orac1/var / 32,4382 GB GB 1,0635 spent
orac1/etc / 32,4382 GB GB 1,0635 spent
orac1/sbin / 32,4382 GB GB 1,0635 spent
orac1/tmp / 32,4382 GB GB 1,0635 spent
Result: Free past to check the disk space ' orac1: / usr, orac1: / var, orac1: / etc, orac1: / sbin, orac1: / tmp '.
Check: Existence of user for "grid".
Name of State comment node
------------ ------------------------ ------------------------
orac2 past exists (1100)
orac1 past exists (1100)
Check for multiple users with the value of the UID 1100
Result: Check for multiple users with the value of the UID 1100 spent
Result: Use existence CONTROL passed to 'grid '.
Check: Existence of group 'oinstall '.
Name of State comment node
------------ ------------------------ ------------------------
orac2 passed exists
orac1 passed exists
Result: Existence of group check passed for "oinstall".
Check: Existence of group for "dba".
Name of State comment node
------------ ------------------------ ------------------------
orac2 passed exists
orac1 passed exists
Result: Existence of group check passed for "dba".
Check: the members of the user 'grid' group 'oinstall' [primary]
Name of node user is group is user group primary status
---------------- ------------ ------------ ------------ ------------ ------------
orac2 Yes Yes Yes Yes past
orac1 Yes Yes Yes Yes past
Result: Membership search for "grid" user in the group 'oinstall' [as Primary] spent
Check: Membership of the user "grid" in a group 'dba '.
Name of node user is group are users in a group situation
---------------- ------------ ------------ ------------ ----------------
orac2 Yes Yes Yes past
orac1 Yes Yes Yes past
Result: Check for user "grid" in group membership 'dba' spent
Tick: Run level
Name of the node run status level required
------------ ------------------------ ------------------------ ----------
orac2 5 3,5 passed
orac1 5 3,5 passed
Result: Run control the level of the past
Check: Hard limits for "file descriptors open maximum".
Node name Type requested State available
---------------- ------------ ------------ ------------ ----------------
4096, 65536 failed hard orac2
4096, 65536 failed hard orac1
Result: Hard limits check failed for 'file descriptors open maximum.
Check: Limits Soft for "file descriptors open maximum".
Node name Type requested State available
---------------- ------------ ------------ ------------ ----------------
1024 1024 soft orac2 spent
sweet orac1 4096 1024 spent
Result: Soft limits check passed for "file descriptors open maximum".
Check: Hard limits for "maximum user processes.
Node name Type requested State available
---------------- ------------ ------------ ------------ ----------------
46654 16384 hard orac2 spent
46654 16384 hard orac1 spent
Result: Verification of limits hard to last for "maximum user process.
Check: Limits Soft for "maximum user process.
Node name Type requested State available
---------------- ------------ ------------ ------------ ----------------
orac2 1024-2047 soft failed
orac1 1024-2047 soft failed
Result: Limits Soft check failed for 'maximum process of the user.
Control: System Architecture
Requested State available node name
------------ ------------------------ ------------------------ ----------
orac2 x86_64 x86_64 spent
orac1 x86_64 x86_64 spent
Result: Verification of the system architecture past
Control: Kernel Version
Requested State available node name
------------ ------------------------ ------------------------ ----------
orac2-2.6.32 - 279.el6.x86_64 2.6.32 spent
orac1-2.6.32 - 279.el6.x86_64 2.6.32 spent
Result: Last kernel version control
Check: Parameter of kernel for 'semmsl.
Current name configured node comment of the requested State
---------------- ------------ ------------ ------------ ------------ ------------
orac1 250 250 250 spent
orac2 250 250 250 spent
Result: Check of kernel parameter passed to "semmsl.
Check: Parameter of kernel for 'semmns.
Current name configured node comment of the requested State
---------------- ------------ ------------ ------------ ------------ ------------
32000 32000 32000 orac1 spent
32000 32000 32000 orac2 spent
Result: Check kernel parameter passed to "semmns.
Check: Parameter of kernel for 'semopm.
Current name configured node comment of the requested State
---------------- ------------ ------------ ------------ ------------ ------------
orac1 100 100 100 spent
orac2 100 100 100 spent
Result: Check kernel parameter passed to "semopm.
Check: Parameter of kernel for 'semmni.
Current name configured node comment of the requested State
---------------- ------------ ------------ ------------ ------------ ------------
orac1 128 128 128 spent
orac2 128 128 128 spent
Result: Check of kernel parameter passed to "semmni.
Check: "Package" kernel parameter
Current name configured node comment of the requested State
---------------- ------------ ------------ ------------ ------------ ------------
4398046511104 4398046511104 3067658240 orac1 spent
4398046511104 4398046511104 3067658240 orac2 spent
Result: Check of kernel parameter passed to 'package '.
Check: Parameter of kernel for "shmmni(5)."
Current name configured node comment of the requested State
---------------- ------------ ------------ ------------ ------------ ------------
4096-4096-4096 orac1 spent
4096-4096-4096 orac2 spent
Result: Check of kernel parameter passed to 'shmmni(5) '.
Check: "Shmall" kernel parameter
Current name configured node comment of the requested State
---------------- ------------ ------------ ------------ ------------ ------------
4294967296 4294967296 599152 orac1 spent
4294967296 4294967296 599152 orac2 spent
Result: Check kernel parameter passed to "shmall.
Check: Parameter of kernel "file-max.
Current name configured node comment of the requested State
---------------- ------------ ------------ ------------ ------------ ------------
6815744 6815744 6815744 orac1 spent
6815744 6815744 6815744 orac2 spent
Result: Check of kernel parameter passed to 'file-max.
Check: "Ip_local_port_range" kernel parameter
Current name configured node comment of the requested State
---------------- ------------ ------------ ------------ ------------ ------------
orac1 between 9000 & 65500 between 9000 & 65500 between 9000 & 65535 passed
orac2 between 9000 & 65500 between 9000 & 65500 between 9000 & 65535 passed
Result: Check of kernel parameter passed to «ip_local_port_range»
Check: Parameter of kernel for "rmem_default."
Current name configured node comment of the requested State
---------------- ------------ ------------ ------------ ------------ ------------
262144 262144 262144 orac1 spent
262144 262144 262144 orac2 spent
Result: Check of kernel parameter passed to 'rmem_default '.
Check: "Rmem_max" kernel parameter
Current name configured node comment of the requested State
---------------- ------------ ------------ ------------ ------------ ------------
4194304 4194304 4194304 orac1 spent
4194304 4194304 4194304 orac2 spent
Result: Check of kernel parameter passed to «rmem_max»
Check: Parameter of kernel for "wmem_default."
Current name configured node comment of the requested State
---------------- ------------ ------------ ------------ ------------ ------------
262144 262144 262144 orac1 spent
262144 262144 262144 orac2 spent
Result: Check of kernel parameter passed to 'wmem_default '.
Check: "Wmem_max" kernel parameter
Current name configured node comment of the requested State
---------------- ------------ ------------ ------------ ------------ ------------
1048576 1048576 1048576 orac1 spent
1048576 1048576 1048576 orac2 spent
Result: Check kernel parameter passed to "wmem_max.
Check: Parameter of kernel for "aio-max-nr.
Current name configured node comment of the requested State
---------------- ------------ ------------ ------------ ------------ ------------
1048576 1048576 1048576 orac1 spent
1048576 1048576 1048576 orac2 spent
Result: Check of kernel parameter passed to "aio-max-nr.
Check: Existence of package for "binutils".
Requested State available node name
------------ ------------------------ ------------------------ ----------
binutils - 2.20.51.0.2 - 5.34.el6 orac2 binutils - 2.20.51.0.2 spent
binutils - 2.20.51.0.2 - 5.34.el6 orac1 binutils - 2.20.51.0.2 spent
Result: Package of checking for "binutils".
Check: Existence of package for "compat-libcap1.
Requested State available node name
------------ ------------------------ ------------------------ ----------
orac2 compat-libcap1 - 1.10 - 1 compat-libcap1 - 1.10 spent
orac1 compat-libcap1 - 1.10 - 1 compat-libcap1 - 1.10 spent
Result: Package of checking for "compat-libcap1.
Control: Existence of package for "compat-libstdc ++-33 (x86_64).
Requested State available node name
------------ ------------------------ ------------------------ ----------
orac2 compat-libstdc ++ - 33 (x86_64) - 3.2.3 - 69.el6 compat-libstdc ++ - 33 (x86_64) - 3.2.3 spent
orac1 compat-libstdc ++ - 33 (x86_64) - 3.2.3 - 69.el6 compat-libstdc ++ - 33 (x86_64) - 3.2.3 spent
Result: Package of checking for "compat-libstdc ++-33 (x86_64).
Control: Existence of package for 'libgcc (x86_64).
Requested State available node name
------------ ------------------------ ------------------------ ----------
orac2 libgcc (x86_64) - 4.4.7 - 11.el6 libgcc (x86_64) - 4.4.4 spent
orac1 libgcc (x86_64) - 4.4.7 - 11.el6 libgcc (x86_64) - 4.4.4 spent
Result: Package of checking for 'libgcc (x86_64).
Control: Existence of package for 'libstdc ++ (x86_64).
Requested State available node name
------------ ------------------------ ------------------------ ----------
orac2 libstdc ++ (x86_64) - 4.4.7 - 11.el6 libstdc ++ (x86_64) - 4.4.4 spent
orac1 libstdc ++ (x86_64) - 4.4.7 - 11.el6 libstdc ++ (x86_64) - 4.4.4 spent
Result: Package of checking for 'libstdc ++ (x86_64).
Control: Existence of package for 'libstdc ++ - devel (x86_64).
Requested State available node name
------------ ------------------------ ------------------------ ----------
orac2 libstdc ++ - devel (x86_64) - 4.4.7 - 11.el6 libstdc ++ - devel (x86_64) - 4.4.4 spent
orac1 libstdc ++ - devel (x86_64) - 4.4.7 - 11.el6 libstdc ++ - devel (x86_64) - 4.4.4 spent
Result: Package of checking for 'libstdc ++ - devel (x86_64).
Check: Existence of package for "sysstat".
Requested State available node name
------------ ------------------------ ------------------------ ----------
sysstat - 9.0.4 - sysstat - 9.0.4 spent 20.el6 orac2
sysstat - 9.0.4 - sysstat - 9.0.4 spent 20.el6 orac1
Result: Package of checking for "sysstat".
Check: Existence of package for 'gcc '.
Requested State available node name
------------ ------------------------ ------------------------ ----------
4.4.7 - gcc - 11.el6 orac2 gcc - 4.4.4 spent
4.4.7 - gcc - 11.el6 orac1 gcc - 4.4.4 spent
Result: Package of checking for "gcc".
Check: Package of existence 'gcc - c++.
Requested State available node name
------------ ------------------------ ------------------------ ----------
orac2 gcc - c++ - 4.4.7 - 11.el6 gcc - c++ - 4.4.4 spent
orac1 gcc - c++ - 4.4.7 - 11.el6 gcc - c++ - 4.4.4 spent
Result: Package of checking for "gcc - c++.
Check: Existence of package for 'ksh '.
Requested State available node name
------------ ------------------------ ------------------------ ----------
ksh-20120801 - 21.el6.1 orac2 spent ksh...
ksh-20120801 - 21.el6.1 orac1 spent ksh...
Result: Package of checking for "ksh".
Check: Existence of package to 'make it '.
Requested State available node name
------------ ------------------------ ------------------------ ----------
make orac2 make - 3.81 - 20.el6 - 3.81 spent
make orac1 make - 3.81 - 20.el6 - 3.81 spent
Result: Package of verification of existence moved to 'make it '.
Control: Existence of package for 'glibc (x86_64).
Requested State available node name
------------ ------------------------ ------------------------ ----------
orac2 glibc (x86_64)-2, 12 - 1.149.el6 glibc (x86_64)-2,12 spent
orac1 glibc (x86_64)-2, 12 - 1.149.el6 glibc (x86_64)-2,12 spent
Result: Package of checking for "glibc (x86_64).
Control: Existence of package for 'glibc-devel (x86_64).
Requested State available node name
------------ ------------------------ ------------------------ ----------
orac2 glibc-devel (x86_64)-2, 12 - 1.149.el6 glibc-devel (x86_64)-2,12 spent
orac1 glibc-devel (x86_64)-2, 12 - 1.149.el6 glibc-devel (x86_64)-2,12 spent
Result: Package of checking for "glibc-devel (x86_64).
Control: Existence of package for "libaio (x86_64).
Requested State available node name
------------ ------------------------ ------------------------ ----------
orac2 (x86_64) - 0.3.107 - 10.el6 libaio libaio (x86_64) - 0.3.107 spent
orac1 (x86_64) - 0.3.107 - 10.el6 libaio libaio (x86_64) - 0.3.107 spent
Result: Package of checking for "libaio (x86_64).
Control: Existence of package for "libaio-devel (x86_64).
Requested State available node name
------------ ------------------------ ------------------------ ----------
orac2 libaio-devel (x86_64) - 0.3.107 - 10.el6 libaio-devel (x86_64) - 0.3.107 spent
orac1 libaio-devel (x86_64) - 0.3.107 - 10.el6 libaio-devel (x86_64) - 0.3.107 spent
Result: Package of checking for "libaio-devel (x86_64).
Check: Existence of package for 'nfs-utils '.
Requested State available node name
------------ ------------------------ ------------------------ ----------
orac2 nfs-utils - 1.2.3 - 26.el6 nfs-utils - 1.2.3 - 15 past
orac1 nfs-utils - 1.2.3 - 26.el6 nfs-utils - 1.2.3 - 15 past
Result: Package of checking for 'nfs-utils '.
Check the availability of the "6200,6100" ports required for the component 'Oracle Notification Service (ONS)'
Name of the node Port number protocol status available
---------------- ------------ ------------ ------------ ----------------
orac2 6200 TCP successful Yes
orac1 6200 TCP successful Yes
orac2 6100 TCP successful Yes
orac1 6100 TCP successful Yes
Result: Availability of Port Control passed to ports '6200,6100 '.
Check for multiple users with the value of the UID 0
Result: Check for multiple users with the value of the UID 0 past
Check: The current group ID
Result: Control of current past group ID
Check the consistency of the main group of the root user from
Status of node name
------------------------------------ ------------------------
orac2 spent
orac1 spent
Check the consistency of the primary group of the user root past
Starting synchronization check by using the Network Time Protocol (NTP)...
Of NTP Configuration file check has started...
The NTP configuration file "/ etc/ntp.conf" is available on all nodes
Of NTP Configuration file check passed
Checking delay of the devil...
Check: Time for 'ntpd '.
Node name race?
------------------------------------ ------------------------
orac2 yes
orac1 yes
Result: Check time-out for 'ntpd '.
Check for NTP daemon or service life spent on all nodes
Check if NTP daemon or service using the 123 UDP port on all nodes
Search the NTP daemon or service uses the port UDP 123
Name of the node Port open?
------------------------------------ ------------------------
orac2 yes
orac1 yes
Common NTP Time Server checks began...
Time server NTP "193.27.209.1" is common to all nodes on which runs the NTP daemon
Time server NTP "194.29.130.252" is common to all nodes on which runs the NTP daemon
Registration of time server common NTP spent
The clock offset record time server NTP began...
Audit on the nodes '[orac2, orac1] "...
Check: The Offset of the time clock to the time server NTP
Time server: 193.27.209.1
Time limit offset: 1000,0 ms
Name of node time shift status
------------ ------------------------ ------------------------
orac2 - 355.25 spent
orac1 - 124.19 spent
Time server "193.27.209.1" has time shifts that are within acceptable limits for the nodes "[orac2, orac1].
Time server: 194.29.130.252
Time limit offset: 1000,0 ms
Name of node time shift status
------------ ------------------------ ------------------------
orac2 - 358.87 spent
orac1 - 109.63 spent
Time server "194.29.130.252" has time shifts that are within acceptable limits for the nodes "[orac2, orac1].
The clock offset check past
Result: Control of synchronization using Network Time Protocol (NTP) spent
Base file name consistency check model...
Check the consistency of spent Core file name pattern.
Check to make sure that the user "grid" is not in the group "root".
Name of State comment node
------------ ------------------------ ------------------------
There is no such thing as orac2 spent
There is no such thing as orac1 spent
Result: User "grid" is not part of the "root" group Check the past
Audit default user file creation mask
Name of node available comment required
------------ ------------------------ ------------------------ ----------
0022-0022 orac2 spent
0022-0022 orac1 spent
Result: Mask by default user file creation passed Verification
Checking the integrity of the file "/ /etc/resolv.conf ' overall of nodes
Check the file "/ /etc/resolv.conf" to ensure that the only area and search for entries is defined
CAUTION:
PRVF-5640: both search and domain entries are present in the file ' / /etc/resolv.conf ' on the following nodes: orac1, orac2
Checking if entry field in the file ' / /etc/resolv.conf ' is constant in knots...
Check the file "/ /etc/resolv.conf ' to ensure that single domain entry is defined
There is no more than a 'domain' entry in any ' / /etc/resolv.conf ' file
All nodes have the same 'domain' entry defined in the file "/ /etc/resolv.conf.
If control search entry in the file "/ /etc/resolv.conf ' is constant in knots...
Check the file "/ /etc/resolv.conf ' to ensure that research that one entry is defined
Several topics 'research' does not exist in any ' / /etc/resolv.conf ' file
All nodes have the same order of 'search' defined in the file "/ /etc/resolv.conf.
Checking the time of DNS response for an unreachable node
Status of node name
------------------------------------ ------------------------
orac1 spent
orac2 spent
The time of DNS response for an unreachable node is consistent with the acceptable limit on all nodes
Check the integrity of the file "/ /etc/resolv.conf ' past
Check: consistency of zone
Result: the zone past consistency check
Verifying the integrity of the name service switch configuration file ' / /etc/nsswitch.conf '...
Check if "hosts" entry in the file "/ /etc/nsswitch.conf" is consistent in all nodes...
Check the file "/ /etc/nsswitch.conf" to ensure that the single entry "hosts" is set
More of an entry "hosts" does not none "/ /etc/nsswitch.conf ' file
All nodes have even entered 'hosts' defined in the file "/ /etc/nsswitch.conf.
Check the integrity of the name service switch configuration file ' / /etc/nsswitch.conf ' past
Control the demon "avahi-daemon" is not configured and running
Check: Daemon "avahi-daemon' not configured
Name of the configured node status
------------ ------------------------ ------------------------
orac2 Yes failed
orac1 Yes failed
Demon not configured has no process "avahi-daemon."
Check: Daemon "avahi-daemon" does not
Node name race? Status
------------ ------------------------ ------------------------
orac2 Yes failed
orac1 Yes failed
Demon of the control does not have to process "avahi-daemon" works not
From check for/dev/SHM mounted as a temporary file system...
Check for/dev/shm mounted as a temporary last file system
******************************************************************************************
Here is a list of pre-requisites fixable chose to fix at this session
******************************************************************************************
-------------- --------------- ----------------
Check has failed. Failed on nodes of reboot needed?
-------------- --------------- ----------------
Limit: maximum orac2 opened, orac1 not
file descriptors
The soft limit: maximum user orac2, orac1 not
process
Demon 'avahi-daemon' not orac2, orac1 not
configured and running
Run "/ tmp/CVU_12.1.0.1.0_grid/runfixup.sh" as root user on the nodes 'orac1, orac2' to perform correcting operations manually
Press the ENTER key to continue after execution of ' / tmp/CVU_12.1.0.1.0_grid/runfixup.sh ' has finished on the nodes 'orac1, orac2 '.
FIX: Strict limit: file descriptors open maximum
Status of node name
------------------------------------ ------------------------
orac2 failed
orac1 failed
ERROR:
GLWB-9023: manual fixed command "/ tmp/CVU_12.1.0.1.0_grid/runfixup.sh" has been issued by the superuser on the node 'orac2 '.
GLWB-9023: manual fixed command "/ tmp/CVU_12.1.0.1.0_grid/runfixup.sh" has been issued by the superuser on the node 'orac1 '.
Result: "strict limit: file descriptors open maximum" could be fixed on nodes 'orac2, orac1 '.
FIX: Soft limit: maximum user process
Status of node name
------------------------------------ ------------------------
orac2 failed
orac1 failed
ERROR:
GLWB-9023: manual fixed command "/ tmp/CVU_12.1.0.1.0_grid/runfixup.sh" has been issued by the superuser on the node 'orac2 '.
GLWB-9023: manual fixed command "/ tmp/CVU_12.1.0.1.0_grid/runfixup.sh" has been issued by the superuser on the node 'orac1 '.
Result: "soft limit: maximum user process" could be fixed on nodes 'orac2, orac1 '.
FIX: Daemon "avahi-daemon' not configured and running
Status of node name
------------------------------------ ------------------------
orac2 failed
orac1 failed
ERROR:
GLWB-9023: manual fixed command "/ tmp/CVU_12.1.0.1.0_grid/runfixup.sh" has been issued by the superuser on the node 'orac2 '.
GLWB-9023: manual fixed command "/ tmp/CVU_12.1.0.1.0_grid/runfixup.sh" has been issued by the superuser on the node 'orac1 '.
Result: "Demon"avahi-daemon' not configured and running"could not set on the nodes 'orac2, orac1 '.
Difficult operations for some prerequisites fixable failed nodes 'orac2, orac1 '.
Check prior to the installation of cluster service failed on all nodes.
SOLVED!
The root cause was in iptables service works.
Just forgot to arrest him and take off chkconfig!
Issue can be closed.
-
Node connectivity error check beforehand in the installation of the grid
Hello
I am doing 2 node rac on oracle grid installation VMware(version-4.2) installation - 11.2
My runcluvfy has been a success, here are the details. But when I started my installation of grid, that she didn't diligence node connectivity failure. It's because of VIP of the two nodes? Can I ignore this error and go further? Please guide me on this
=======================================================================================================================================================
[oracle@rac3 grid] $ clusterverify_new4.log more
Conducting due diligence to install cluster services
Audit accessibility of node...
Check: Accessibility of node of the node "rac3.
Accessible destination node?
------------------------------------ ------------------------
rac3 yes
rac4 yes
Result: Check accessibility node from node 'rac3.
Verify the equivalence of the user...Check: Equivalence of the user for the user 'oracle '.
Comment by node name
------------------------------------ ------------------------
RAC4 spent
RAC3 spent
Result: Use equivalence CONTROL passed to user 'oracle '.Verify node connectivity...
Checking the configuration of the hosts file...
Name of State comment node
------------ ------------------------ ------------------------
RAC4 spent
RAC3 spentThe hosts config file verification successful
Interface of the node information "rac4.
Name address IP subnet gateway Gateway bat HW address MTU
------ --------------- --------------- --------------- --------------- ----------------- ------
192.168.1.111 eth0 192.168.1.0 0.0.0.0 192.168.1.1 08:00:27:D7:DD:28 1500
Interface of the node information "rac3.
Name address IP subnet gateway Gateway bat HW address MTU
------ --------------- --------------- --------------- --------------- ----------------- ------
192.168.1.101 eth0 192.168.1.0 0.0.0.0 192.168.1.1 08:00:27:12:7 C: 93 1500
eth1 192.168.2.101 192.168.2.0 0.0.0.0 192.168.1.1 08:00:27:98:E0:86 1500
Check: Subnet node connectivity "192.168.1.0.
Source Destination connected?
------------------------------ ------------------------------ ----------------
RAC4:eth0 rac3:eth0 Yes
Result: Connectivity node passed to subnet "192.168.1.0" with one or more nodes rac4, rac3
Check: The subnet "192.168.1.0" TCP connectivity
Source Destination connected?
------------------------------ ------------------------------ ----------------
RAC3:192.168.1.101 rac4:192.168.1.111 spent
Result: Check of TCP connectivity spent for subnet "192.168.1.0.
Check: Subnet node connectivity "192.168.2.0.
Result: Connectivity node passed to subnet "192.168.2.0' with one or more nodes rac3
Check: The subnet "192.168.2.0 TCP connectivity.
Result: Check of TCP connectivity spent for subnet "192.168.2.0.
The interfaces on the subnet "192.168.1.0" who are likely candidates for VIP are:
eth0:192.168.1.111 RAC4
RAC3 eth0:192.168.1.101CAUTION:
Could not find an appropriate interface for the private interconnection rangeResult: Check connectivity node passed
Check: Total memory
Name of node available comment required
------------ ------------------------ ------------------------ ----------
RAC4 1.98 GB (2075468,0 KB) increased from 1.5 GB (1572864,0 KB)
RAC3 1.98 GB (2075468,0 KB) increased from 1.5 GB (1572864,0 KB)
Result: The total past memory checkCheck: Available memory
Name of node available comment required
------------ ------------------------ ------------------------ ----------
RAC4 transmitted 1.87 GB (KB 1959736,0) 50 MB (51200,0 KB)
RAC3 1.84 GB (1931904,0 KB) sent 50 MB (51200,0 KB)
Result: Available past memory checkCheck: Swap space
Name of node available comment required
------------ ------------------------ ------------------------ ----------
RAC4 3.94 GB (4128760,0 KB) from 2.97 GB (3113202,0 KB)
RAC3 3.94 GB (4128760,0 KB) from 2.97 GB (3113202,0 KB)
Result: Check the Swap space pastCheck: Disk space for "rac4: / tmp '.
Path of comment required node name Mount point available
---------------- ------------ ------------ ------------ ------------ ------------
rac4/tmp / spent 11,49 GB 1 GB
Result: Free past to check the disk space ' rac4: / tmp '.Check: Disk space for "rac3: / tmp '.
Path of comment required node name Mount point available
---------------- ------------ ------------ ------------ ------------ ------------
rac3/tmp / spent 16,66 GB 1 GB
Result: Free past to check the disk space ' rac3: / tmp '.Check: Existence of user for 'oracle '.
Name of State comment node
------------ ------------------------ ------------------------
RAC4 are past
RAC3 is past
Result: Use CONTROL existence increased for 'oracle '.Check: Existence of group 'oinstall '.
Name of State comment node
------------ ------------------------ ------------------------
RAC4 are past
RAC3 is past
Result: Existence of group check passed for "oinstall".Check: Existence of group for "dba".
Name of State comment node
------------ ------------------------ ------------------------
RAC4 are past
RAC3 is past
Result: Existence of group check passed for "dba".Check: Members of the user 'oracle' in group 'oinstall' [primary]
Name of node user is group is user in the main group comment
---------------- ------------ ------------ ------------ ------------ ------------
Yes Yes Yes Yes past RAC4
Yes Yes Yes Yes past RAC3
Result: Membership check for user 'oracle' in group 'oinstall' [as Primary] pastCheck: Membership of the 'oracle' user group 'dba '.
Name of node user is group is user in the comments group
---------------- ------------ ------------ ------------ ----------------
Yes Yes Yes past RAC4
RAC3 Yes Yes Yes past
Result: Membership check for user 'oracle' in group 'dba' spentTick: Run level
Name of the node run level comment required
------------ ------------------------ ------------------------ ----------
rac4 5 3,5 passed
rac3 5 3,5 passed
Result: Run control the level of the pastCheck: Hard limits for "file descriptors open maximum".
Name of node Type available comment required
---------------- ------------ ------------ ------------ ----------------
65536 65536 hard RAC4 spent
65536 65536 hard RAC3 spent
Result: Verification of limits hard to last for "maximum open file descriptors.Check: Limits Soft for "file descriptors open maximum".
Name of node Type available comment required
---------------- ------------ ------------ ------------ ----------------
1024 1024 soft RAC4 spent
1024 1024 soft RAC3 spent
Result: Soft limits check passed for "file descriptors open maximum".Check: Hard limits for "maximum user processes.
Name of node Type available comment required
---------------- ------------ ------------ ------------ ----------------
16384 16384 hard RAC4 spent
16384 16384 hard RAC3 spent
Result: Verification of limits hard to last for "maximum user process.Check: Limits Soft for "maximum user process.
Name of node Type available comment required
---------------- ------------ ------------ ------------ ----------------
2047 2047 soft RAC4 spent
2047 2047 soft RAC3 spent
Result: Soft limits check passed for "maximum user process.Control: System Architecture
Name of node available comment required
------------ ------------------------ ------------------------ ----------
I686, x 86 RAC4 spent
RAC3 i686 x 86 spent
Result: Verification of the system architecture pastControl: Kernel Version
Name of node available comment required
------------ ------------------------ ------------------------ ----------
RAC4 2.6.18 - 2.6.18 194.el5 spent
RAC3 2.6.18 - 2.6.18 194.el5 spent
Result: Last kernel version controlCheck: Parameter of kernel for 'semmsl.
Name of the configured node comment required
------------ ------------------------ ------------------------ ----------
RAC4 250 250 spent
RAC3 250 250 spent
Result: Check of kernel parameter passed to "semmsl.Check: Parameter of kernel for 'semmns.
Name of the configured node comment required
------------ ------------------------ ------------------------ ----------
RAC4 32000 32000 spent
RAC3 32000 32000 spent
Result: Check kernel parameter passed to "semmns.Check: Parameter of kernel for 'semopm.
Name of the configured node comment required
------------ ------------------------ ------------------------ ----------
RAC4 100 100 spent
RAC3 100 100 spent
Result: Check kernel parameter passed to "semopm.Check: Parameter of kernel for 'semmni.
Name of the configured node comment required
------------ ------------------------ ------------------------ ----------
RAC4 128 128 spent
RAC3 128 128 spent
Result: Check of kernel parameter passed to "semmni.Check: "Package" kernel parameter
Name of the configured node comment required
------------ ------------------------ ------------------------ ----------
RAC4 536870912 1054504960 spent
RAC3 536870912 1054504960 spent
Result: Check of kernel parameter passed to 'package '.Check: Parameter of kernel for "shmmni(5)."
Name of the configured node comment required
------------ ------------------------ ------------------------ ----------
RAC4 4096 4096 spent
RAC3 4096 4096 spent
Result: Check of kernel parameter passed to 'shmmni(5) '.Check: "Shmall" kernel parameter
Name of the configured node comment required
------------ ------------------------ ------------------------ ----------
RAC4 2097152 2097152 spent
RAC3 2097152 2097152 spent
Result: Check kernel parameter passed to "shmall.Check: Parameter of kernel "file-max.
Name of the configured node comment required
------------ ------------------------ ------------------------ ----------
RAC4 6815744 6815744 spent
RAC3 6815744 6815744 spent
Result: Check of kernel parameter passed to 'file-max.Check: "Ip_local_port_range" kernel parameter
Name of the configured node comment required
------------ ------------------------ ------------------------ ----------
Between 9000 & 65500 RAC4 between 9000 & 65500 past
Between 9000 & 65500 RAC3 between 9000 & 65500 past
Result: Check of kernel parameter passed to «ip_local_port_range»Check: Parameter of kernel for "rmem_default."
Name of the configured node comment required
------------ ------------------------ ------------------------ ----------
RAC4 262144 262144 spent
RAC3 262144 262144 spent
Result: Check of kernel parameter passed to 'rmem_default '.Check: "Rmem_max" kernel parameter
Name of the configured node comment required
------------ ------------------------ ------------------------ ----------
RAC4 4194304 4194304 spent
RAC3 4194304 4194304 spent
Result: Check of kernel parameter passed to «rmem_max»Check: Parameter of kernel for "wmem_default."
Name of the configured node comment required
------------ ------------------------ ------------------------ ----------
RAC4 262144 262144 spent
RAC3 262144 262144 spent
Result: Check of kernel parameter passed to 'wmem_default '.Check: "Wmem_max" kernel parameter
Name of the configured node comment required
------------ ------------------------ ------------------------ ----------
RAC4 1048576 1048586 spent
RAC3 1048576 1048586 spent
Result: Check kernel parameter passed to "wmem_max.Check: Parameter of kernel for "aio-max-nr.
Name of the configured node comment required
------------ ------------------------ ------------------------ ----------
RAC4 1048576 1048576 spent
RAC3 1048576 1048576 spent
Result: Check of kernel parameter passed to "aio-max-nr.Check: Existence of package for "make - 3.81.
Name of node available comment required
------------ ------------------------ ------------------------ ----------
Make RAC4 make - 3.81 - 3.el5 - 3.81 spent
RAC3 make - 3.81 - 3.el5 make - 3.81 spent
Result: Package of verification of the past existence to 'make - 3.81.Check: Existence of package for ' binutils - 2.17.50.0.6.
Name of node available comment required
------------ ------------------------ ------------------------ ----------
binutils - 2.17.50.0.6 - 14.el5 binutils - 2.17.50.0.6 spent RAC4
binutils - 2.17.50.0.6 - 14.el5 binutils - 2.17.50.0.6 spent RAC3
Result: Package of verification of the past for existence ' binutils - 2.17.50.0.6.Check: Existence of package for "gcc - 4.1.2.
Name of node available comment required
------------ ------------------------ ------------------------ ----------
4.1.2 - gcc - 48.el5 gcc - 4.1.2 spent RAC4
4.1.2 - gcc - 48.el5 gcc - 4.1.2 spent RAC3
Result: Package of verification of the past for existence ' gcc - 4.1.2.Check: Package of existence ' gcc - c++ - 4.1.2.
Name of node available comment required
------------ ------------------------ ------------------------ ----------
RAC4 CCG - c++ - 4.1.2 - 48.el5 gcc - c++ - 4.1.2 spent
RAC3 CCG - c++ - 4.1.2 - 48.el5 gcc - c++ - 4.1.2 spent
Result: Package of verification of the past for existence ' gcc - c++ - 4.1.2.Check: Existence of package for "libgomp - 4.1.2.
Name of node available comment required
------------ ------------------------ ------------------------ ----------
RAC4 4.4.0 - libgomp - libgomp - 4.1.2 spent 6.el5
RAC3 4.4.0 - libgomp - libgomp - 4.1.2 spent 6.el5
Result: Package of verification of the past for existence "libgomp - 4.1.2.Check: Existence of package for "libaio - 0.3.106.
Name of node available comment required
------------ ------------------------ ------------------------ ----------
from RAC4 libaio - 0.3.106 - 5 libaio - 0.3.106
from RAC3 libaio - 0.3.106 - 5 libaio - 0.3.106
Result: Package of verification of the past for existence "libaio - 0.3.106.Check: Existence of package "24 / 2.5 / glibc.
Name of node available comment required
------------ ------------------------ ------------------------ ----------
past RAC4 glibc - 2.5 - 49 glibc-2, 5-24
past of RAC3 glibc - 2.5 - 49 glibc-2, 5-24
Result: Package check existence for "glibc-2, 5-24.Check: Package of existence "compat-libstdc ++ - 33 - 3.2.3.
Name of node available comment required
------------ ------------------------ ------------------------ ----------
RAC4 compat-libstdc ++-33 - 3.2.3 - 61 compat-libstdc ++-33 - 3.2.3 spent
RAC3 compat-libstdc ++-33 - 3.2.3 - 61 compat-libstdc ++-33 - 3.2.3 spent
Result: Package of checking for "compat-libstdc ++ - 33 - 3.2.3.Check: Existence of package for "elfutils-libelf-0, 125.
Name of node available comment required
------------ ------------------------ ------------------------ ----------
RAC4 elfutils-libelf-0, 137 - 3.el5 elfutils-libelf-0, 125 past
RAC3 elfutils-libelf-0, 137 - 3.el5 elfutils-libelf-0, 125 past
Result: Package of verification of the past for existence "elfutils-libelf-0, 125.Check: Existence of package for "elfutils-libelf-devel-0, 125.
Name of node available comment required
------------ ------------------------ ------------------------ ----------
RAC4 elfutils-libelf-devel-0, 137 - 3.el5 elfutils-libelf-devel-0, 125 past
RAC3 elfutils-libelf-devel-0, 137 - 3.el5 elfutils-libelf-devel-0, 125 past
Result: Package of verification of the past for existence "elfutils-libelf-devel-0, 125.Check: Existence of package for ' glibc-common - 2.5.
Name of node available comment required
------------ ------------------------ ------------------------ ----------
from RAC4 glibc-common - 2.5 - 49 glibc-common - 2.5
from RAC3 glibc-common - 2.5 - 49 glibc-common - 2.5
Result: Package of verification of the past for existence ' glibc-common - 2.5.Check: Existence of package for ' glibc-devel - 2.5.
Name of node available comment required
------------ ------------------------ ------------------------ ----------
from RAC4 glibc-devel - 2.5 - 49 glibc-devel - 2.5
from RAC3 glibc-devel - 2.5 - 49 glibc-devel - 2.5
Result: Package of verification of the past for existence ' glibc-devel - 2.5.Check: Existence of package for ' glibc-headers - 2.5.
Name of node available comment required
------------ ------------------------ ------------------------ ----------
from RAC4 headers glibc - 2.5 - 49 glibc-headers - 2.5
from RAC3 headers glibc - 2.5 - 49 glibc-headers - 2.5
Result: Package of verification of the past for existence ' glibc-headers - 2.5.Check: Existence of package for "libaio-devel - 0.3.106.
Name of node available comment required
------------ ------------------------ ------------------------ ----------
from RAC4 libaio-devel - 0.3.106 - 5 libaio-devel - 0.3.106
from RAC3 libaio-devel - 0.3.106 - 5 libaio-devel - 0.3.106
Result: Package of verification of the past for existence "libaio-devel - 0.3.106.Check: Existence of package for "4.1.2 - libgcc '.
Name of node available comment required
------------ ------------------------ ------------------------ ----------
4.1.2 - libgcc - 48.el5 libgcc - 4.1.2 spent RAC4
4.1.2 - libgcc - 48.el5 libgcc - 4.1.2 spent RAC3
Result: Package of verification of the past for existence ' libgcc - 4.1.2.Check: Package of existence ' libstdc ++-4.1.2.
Name of node available comment required
------------ ------------------------ ------------------------ ----------
RAC4 libstdc ++ - 4.1.2 - 48.el5 libstdc ++-4.1.2 spent
RAC3 libstdc ++ - 4.1.2 - 48.el5 libstdc ++-4.1.2 spent
Result: Package of verification of the past for existence ' libstdc ++-4.1.2.Check: Package of existence ' libstdc ++ - devel - 4.1.2.
Name of node available comment required
------------ ------------------------ ------------------------ ----------
RAC4 libstdc ++ - devel - 4.1.2 - 48.el5 libstdc ++ - devel - 4.1.2 spent
RAC3 libstdc ++ - devel - 4.1.2 - 48.el5 libstdc ++ - devel - 4.1.2 spent
Result: Package of verification of the past for existence ' libstdc ++ - devel - 4.1.2.Check: Existence of package for "sysstat - 7.0.2.
Name of node available comment required
------------ ------------------------ ------------------------ ----------
from RAC4 sysstat - 7.0.2 - 3.el5 sysstat - 7.0.2
from RAC3 sysstat - 7.0.2 - 3.el5 sysstat - 7.0.2
Result: Package of checking for "sysstat - 7.0.2.Check: Existence of package for "unixODBC - 2.2.11.
Name of node available comment required
------------ ------------------------ ------------------------ ----------
RAC4 unixODBC - 2.2.11 - unixODBC - 2.2.11 spent 7.1
RAC3 unixODBC - 2.2.11 - unixODBC - 2.2.11 spent 7.1
Result: Package of verification of the past for existence "unixODBC - 2.2.11.Check: Existence of package for "unixODBC-devel - 2.2.11.
Name of node available comment required
------------ ------------------------ ------------------------ ----------
RAC4, unixODBC unixODBC-devel-2.2.11-7.1-devel-2.2.11 spent
RAC3, unixODBC unixODBC-devel-2.2.11-7.1-devel-2.2.11 spent
Result: Package of verification of the past for existence "unixODBC-devel - 2.2.11.Check: Existence of package for 'ksh-20060214.
Name of node available comment required
------------ ------------------------ ------------------------ ----------
from RAC4, ksh ksh-20100202 - 1.el5 - 20060214
from RAC3, ksh ksh-20100202 - 1.el5 - 20060214
Result: Package of checking for "ksh-20060214"Check for multiple users with the value of the UID 0
Result: Check for multiple users with the value of the UID 0 pastCheck: The current group ID
Result: Control of current past group ID
Base file name consistency check model...
Check the consistency of spent Core file name pattern.Check to make sure that the 'oracle' user is not in group "root".
Name of State comment node
------------ ------------------------ ------------------------
RAC4 are not past
RAC3 is not past
Result: The user 'oracle' is no not part of the group 'root '. Check the pastAudit default user file creation mask
Name of node available comment required
------------ ------------------------ ------------------------ ----------
RAC4 0022 0022 spent
RAC3 0022 0022 spent
Result: Mask by default user file creation passed VerificationStarting synchronization check by using the Network Time Protocol (NTP)...
Of NTP Configuration file check has started...
File configuration network time Protocol (NTP) could not be found on one of the nodes. Oracle Cluster time
Synchronization service (CTSS) may be used instead of NTP to synchronize the time on the cluster
nodesResult: Control of synchronization using Network Time Protocol (NTP) spent
Check beforehand for cluster services Setup was successful.===============================================================================================================================================================
Kind regards
user10341747 wrote:
Hello pradeep,.
[oracle@rac3 grid] $ cat/etc/hosts
# Do not remove the next line, or various programs
# requiring a network functionality will fail.
127.0.0.1 localhost.localdomain localhost# Public
192.168.1.101 rac3 rac3.localdomain
192.168.1.111 rac4 rac4.localdomain
# Private
192.168.2.101 priv.localdomain - rac3 rac3-priv
192.168.2.111 priv.localdomain - rac4 rac4-priv
# Virtual
192.168.2.113 vip.localdomain - rac3 rac3-vip
192.168.2.114 vip.localdomain - rac4 rac4-vip
# SCAN
192.168.2.201 rac - scan.localdomain rac-scan
[oracle@rac3 grid] $You have a problem with IP addresses:
Use * 192.168.2 for private, virtual, and scan?
Public, virtual and SCAN IPs must be the same private network is must be different.
He warns here, out of cluvfy:
The interfaces on the subnet "192.168.1.0" who are likely candidates for VIP are:
eth0:192.168.1.111 RAC4
RAC3 eth0:192.168.1.101CAUTION:
Could not find an appropriate interface for the private interconnection rangeResult: Check connectivity node passed
You can change as below
# Public
192.168.1.101 rac3 rac3.localdomain
192.168.1.111 rac4 rac4.localdomain
# Private
192.168.2.101 priv.localdomain - rac3 rac3-priv
192.168.2.111 priv.localdomain - rac4 rac4-priv
# Virtual
192.168.1.113 vip.localdomain - rac3 rac3-vip
192.168.1.114 vip.localdomain - rac4 rac4-vip
# SCAN
192.168.1.201 rac - rac-scan scan.localdomain
Concerning
Mr. Mahir Quluzade
-
11g grid Infrastructure crashes to check umask
Hi all
Operating system: Solaris 10
Version of grid Infrastructure: 11.2.0.1
11g grid Infrastructure installation hangs at 97% while checking the umask.
After Googling, I run runclufy and it crashes after "result:"grid"the user is not part of the group 'root'." Last check"
Kindly let me know what I missed.
bash-3. 00$./runcluvfy.sh stage pre - crsinst - oamrepo1, oamrepo2 n - correction-verbose
Conducting due diligence to install cluster services
Audit accessibility of node...
Check: Accessibility of node of the node 'oamrepo1 '.
Accessible destination node?
------------------------------------ ------------------------
oamrepo2 Yes
oamrepo1 Yes
Result: Check accessibility node from node 'oamrepo1 '.
Verify the equivalence of the user...
Check: Equivalence for the user "grid."
Comment by node name
------------------------------------ ------------------------
oamrepo2 spent
oamrepo1 spent
Result: Use CONTROL passed to user equivalence "grid."
Verify node connectivity...
Checking the configuration of the hosts file...
Name of State comment node
------------ ------------------------ ------------------------
oamrepo2 spent
oamrepo1 spent
The hosts config file verification successful
Interface of the node information to "oamrepo2".
Name address IP subnet gateway Gateway bat HW address MTU
------ --------------- --------------- --------------- --------------- ----------------- ------
e1000g0 192.168.2.72 192.168.2.0 UNKNOWN 00 192.168.2.72: 0C: 29:E7:15:A2 1500
e1000g1 192.168.1.72 192.168.1.0 192.168.1.72 UNKNOWN 00: 0C: 29:E7:15:AC 1500
Interface of the node information to "oamrepo1".
Name address IP subnet gateway Gateway bat HW address MTU
------ --------------- --------------- --------------- --------------- ----------------- ------
e1000g0 192.168.2.71 192.168.2.0 UNKNOWN 00 192.168.2.71: 0C: 29:12:F4:EA 1500
e1000g1 192.168.1.71 192.168.1.0 192.168.1.71 UNKNOWN 00: 0C: 29:12:F4:F4 1500
Check: Subnet node connectivity "192.168.2.0.
Source Destination connected?
------------------------------ ------------------------------ ----------------
oamrepo2:e1000g0 oamrepo1:e1000g0 Yes
Result: Connectivity node passed to subnet "192.168.2.0' with one or more nodes oamrepo2, oamrepo1
Check: The subnet "192.168.2.0 TCP connectivity.
Source Destination connected?
------------------------------ ------------------------------ ----------------
oamrepo1:192.168.2.71 oamrepo2:192.168.2.72 spent
Result: Check of TCP connectivity spent for subnet "192.168.2.0.
Check: Subnet node connectivity "192.168.1.0.
Source Destination connected?
------------------------------ ------------------------------ ----------------
oamrepo2:e1000g1 oamrepo1:e1000g1 Yes
Result: Connectivity node passed to subnet "192.168.1.0" with one or more nodes oamrepo2, oamrepo1
Check: The subnet "192.168.1.0" TCP connectivity
Source Destination connected?
------------------------------ ------------------------------ ----------------
oamrepo1:192.168.1.71 oamrepo2:192.168.1.72 spent
Result: Check of TCP connectivity spent for subnet "192.168.1.0.
The interfaces on the subnet "192.168.2.0" who are likely candidates for a private interconnection are:
oamrepo2 e1000g0:192.168.2.72
oamrepo1 e1000g0:192.168.2.71
The interfaces on the subnet "192.168.1.0" who are likely candidates for a private interconnection are:
oamrepo2 e1000g1:192.168.1.72
oamrepo1 e1000g1:192.168.1.71
CAUTION:
Could not find an appropriate interface for the VIP range
Result: Check connectivity node passed
Check: Total memory
Name of node available comment required
------------ ------------------------ ------------------------ ----------
oamrepo2 spent 1.5 GB (1572864,0 KB) / 3GB (3145728,0 KB)
oamrepo1 spent 1.5 GB (1572864,0 KB) / 3GB (3145728,0 KB)
Result: The total past memory check
Check: Available memory
Name of node available comment required
------------ ------------------------ ------------------------ ----------
transmitted oamrepo2 Go 2,3972 (2513648,0 KB) 50 MB (51200,0 KB)
transmitted oamrepo1 Go 2,1475 (2251808,0 KB) 50 MB (51200,0 KB)
Result: Available past memory check
Check: Swap space
Name of node available comment required
------------ ------------------------ ------------------------ ----------
oamrepo2 Go 4,0064 (4200992,0 KB) transmitted from 3 GB (3145728,0 KB)
oamrepo1 Go 4,0064 (4200992,0 KB) transmitted from 3 GB (3145728,0 KB)
Result: Check the Swap space past
Check: Disk space for "oamrepo2: / var/tmp / '.
Path of comment required node name Mount point available
---------------- ------------ ------------ ------------ ------------ ------------
/ var/tmp/oamrepo2 / 2,9798 GB 1 GB spent
Result: Free past to check the disk space ' oamrepo2: / var/tmp / '.
Check: Disk space for "oamrepo1: / var/tmp / '.
Path of comment required node name Mount point available
---------------- ------------ ------------ ------------ ------------ ------------
/ var/tmp/oamrepo1 / 2,9802 GB 1 GB spent
Result: Free past to check the disk space ' oamrepo1: / var/tmp / '.
Check: Existence of user for "grid".
Name of State comment node
------------ ------------------------ ------------------------
oamrepo2 exists (1002) past
oamrepo1 exists (1002) past
Check for multiple users with the value of the UID 1002
Result: Check for multiple users with the value of the UID 1002 spent
Result: Use existence CONTROL passed to 'grid '.
Check: Existence of group 'oinstall '.
Name of State comment node
------------ ------------------------ ------------------------
oamrepo2 are past
oamrepo1 are past
Result: Existence of group check passed for "oinstall".
Check: Existence of group for "dba".
Name of State comment node
------------ ------------------------ ------------------------
oamrepo2 are past
oamrepo1 are past
Result: Existence of group check passed for "dba".
Check: the members of the user 'grid' group 'oinstall' [primary]
Name of node user is group is user in the main group comment
---------------- ------------ ------------ ------------ ------------ ------------
oamrepo2 Yes Yes Yes Yes past
oamrepo1 Yes Yes Yes Yes past
Result: Membership search for "grid" user in the group 'oinstall' [as Primary] spent
Check: Membership of the user "grid" in a group 'dba '.
Name of node user is group is user in the comments group
---------------- ------------ ------------ ------------ ----------------
oamrepo2 Yes Yes failed
oamrepo1 Yes Yes failed
Result: Membership check for user "grid" group 'dba' failed
Tick: Run level
Name of the node run level comment required
------------ ------------------------ ------------------------ ----------
3 3 oamrepo2 spent
3 3 oamrepo1 spent
Result: Run control the level of the past
Check: Hard limits for "file descriptors open maximum".
Name of node Type available comment required
---------------- ------------ ------------ ------------ ----------------
hard oamrepo2 65536 65536 spent
hard oamrepo1 65536 65536 spent
Result: Verification of limits hard to last for "maximum open file descriptors.
Check: Limits Soft for "file descriptors open maximum".
Name of node Type available comment required
---------------- ------------ ------------ ------------ ----------------
past 65536 1024 oamrepo2 soft
past 65536 1024 oamrepo1 soft
Result: Soft limits check passed for "file descriptors open maximum".
Check: Hard limits for "maximum user processes.
Name of node Type available comment required
---------------- ------------ ------------ ------------ ----------------
hard oamrepo2 16384 16384 spent
hard oamrepo1 16384 16384 spent
Result: Verification of limits hard to last for "maximum user process.
Check: Limits Soft for "maximum user process.
Name of node Type available comment required
---------------- ------------ ------------ ------------ ----------------
sweet oamrepo2 16384 2047 spent
sweet oamrepo1 16384 2047 spent
Result: Soft limits check passed for "maximum user process.
Control: System Architecture
Name of node available comment required
------------ ------------------------ ------------------------ ----------
64 - bit amd64 oamrepo2 kernel modules 64-bit amd64 kernel modules past
64 - bit amd64 oamrepo1 kernel modules 64-bit amd64 kernel modules past
Result: Verification of the system architecture past
Control: Kernel Version
Name of node available comment required
------------ ------------------------ ------------------------ ----------
5.10 - 2010.08.11.10.15 5.10 - 2008.10 spent oamrepo2
5.10 - 2010.08.11.10.15 5.10 - 2008.10 spent oamrepo1
Result: Last kernel version control
Check: Kernel parameter for "Project.Max - sem - ids".
Name of the configured node comment required
------------ ------------------------ ------------------------ ----------
oamrepo2 128 100 spent
oamrepo1 128 100 spent
Result: Check of kernel parameter passed to "Project.Max - sem - ids".
Check: Kernel parameter for "Process.Max - sem-nsems.
Name of the configured node comment required
------------ ------------------------ ------------------------ ----------
oamrepo2 512 256 spent
oamrepo1 512 256 spent
Result: Check of kernel parameter passed to "Process.Max - sem-nsems.
Check: Kernel parameter for "Project.Max - shm-memory".
Name of the configured node comment required
------------ ------------------------ ------------------------ ----------
4294967295 4294967296 oamrepo2 spent
4294967295 4294967296 oamrepo1 spent
Result: Check of kernel parameter passed to "Project.Max - shm-memory".
Check: Kernel parameter for "Project.Max - shm - ids".
Name of the configured node comment required
------------ ------------------------ ------------------------ ----------
oamrepo2 128 100 spent
oamrepo1 128 100 spent
Result: Check of kernel parameter passed to "Project.Max - shm - ids".
Check: Existence of package for 'SUNWarc-... »
Name of node available comment required
------------ ------------------------ ------------------------ ----------
past oamrepo2 SUNWarc - 11.10.0 - 2005.01.21.16.34 SUNWarc...
past oamrepo1 SUNWarc - 11.10.0 - 2005.01.21.16.34 SUNWarc...
Result: Package of checking for 'SUNWarc-... »
Check: Existence of package for 'SUNWbtool-... »
Name of node available comment required
------------ ------------------------ ------------------------ ----------
past oamrepo2 SUNWbtool - 11.10.0 - 2005.01.21.16.34 SUNWbtool...
past oamrepo1 SUNWbtool - 11.10.0 - 2005.01.21.16.34 SUNWbtool...
Result: Package of checking for 'SUNWbtool-... »
Check: Existence of package for 'SUNWhea-... »
Name of node available comment required
------------ ------------------------ ------------------------ ----------
past oamrepo2 SUNWhea - 11.10.0 - 2005.01.21.16.34 SUNWhea...
past oamrepo1 SUNWhea - 11.10.0 - 2005.01.21.16.34 SUNWhea...
Result: Package of checking for 'SUNWhea-... »
Check: Existence of package for 'SUNWlibm-... »
Name of node available comment required
------------ ------------------------ ------------------------ ----------
past 5.10 - SUNWlibm - 2004.12.18 SUNWlibm oamrepo2...
past 5.10 - SUNWlibm - 2004.12.18 SUNWlibm oamrepo1...
Result: Package of checking for 'SUNWlibm-... »
Check: Existence of package for 'SUNWlibms-... »
Name of node available comment required
------------ ------------------------ ------------------------ ----------
past oamrepo2 SUNWlibms - 5.10 - 2004.11.23 SUNWlibms...
past oamrepo1 SUNWlibms - 5.10 - 2004.11.23 SUNWlibms...
Result: Package of checking for 'SUNWlibms-... »
Check: Existence of package for 'SUNWsprot-... »
Name of node available comment required
------------ ------------------------ ------------------------ ----------
past 5.10 - SUNWsprot - 2004.12.18 SUNWsprot oamrepo2...
past 5.10 - SUNWsprot - 2004.12.18 SUNWsprot oamrepo1...
Result: Package of checking for 'SUNWsprot-... »
Check: Existence of package for 'SUNWtoo-... »
Name of node available comment required
------------ ------------------------ ------------------------ ----------
past SUNWtoo - 11.10.0 - SUNWtoo 2005.01.21.16.34 oamrepo2...
past SUNWtoo - 11.10.0 - SUNWtoo 2005.01.21.16.34 oamrepo1...
Result: Package of checking for 'SUNWtoo-... »
Check: Existence of package for 'SUNWi1of-... »
Name of node available comment required
------------ ------------------------ ------------------------ ----------
past oamrepo2 SUNWi1of - 6.6.2.7400 - 0.2004.12.15 SUNWi1of...
past oamrepo1 SUNWi1of - 6.6.2.7400 - 0.2004.12.15 SUNWi1of...
Result: Package of checking for 'SUNWi1of-... »
Check: Existence of package for 'SUNWxwfnt...' »
Name of node available comment required
------------ ------------------------ ------------------------ ----------
past oamrepo2 SUNWxwfnt - 6.6.2.7400 - 0.2004.12.15 SUNWxwfnt...
past oamrepo1 SUNWxwfnt - 6.6.2.7400 - 0.2004.12.15 SUNWxwfnt...
Result: Package of checking for 'SUNWxwfnt...' »
Check: Existence of package for 'SUNWlibC-... »
Name of node available comment required
------------ ------------------------ ------------------------ ----------
past 5.10 - SUNWlibC - 2004.12.20 SUNWlibC oamrepo2...
past 5.10 - SUNWlibC - 2004.12.20 SUNWlibC oamrepo1...
Result: Package of checking for 'SUNWlibC-... »
Check: Existence of package for 'SUNWcsl-... »
Name of node available comment required
------------ ------------------------ ------------------------ ----------
past oamrepo2 SUNWcsl - 11.10.0 - 2005.01.21.16.34 SUNWcsl...
past oamrepo1 SUNWcsl - 11.10.0 - 2005.01.21.16.34 SUNWcsl...
Result: Package of checking for 'SUNWcsl-... »
Check: the operating system patch for " " Patch 139575 -03"
Name of the requested node comment required
------------ ------------------------ ------------------------ ----------
oamrepo2 Patch 139556 -08 Patch 139575 past-03
oamrepo1 Patch 139556 -08 Patch 139575 past-03
Result: check the system operation patch passed for " " Patch 139575 -03"
Check: the operating system patch for " " Patch 139556 -08"
Name of the requested node comment required
------------ ------------------------ ------------------------ ----------
oamrepo2 Patch 139556 -08 Patch 139556 past-08
oamrepo1 Patch 139556 -08 Patch 139556 past-08
Result: check the system operation patch passed for " " Patch 139556 -08"
Check: the operating system patch for " " Patch 137104 -02"
Name of the requested node comment required
------------ ------------------------ ------------------------ ----------
oamrepo2 Patch 141445 -09 Patch 137104 past-02
oamrepo1 Patch 141445 -09 Patch 137104 past-02
Result: check the system operation patch passed for " " Patch 137104 -02"
Check: the operating system patch for " " 120754 patch -06"
Name of the requested node comment required
------------ ------------------------ ------------------------ ----------
oamrepo2 120754 patch -07 120754 patch past-06
oamrepo1 120754 patch -07 120754 patch past-06
Result: check the system operation patch passed for " " 120754 patch -06"
Check: the operating system patch for " " Patch 119961 -05"
Name of the requested node comment required
------------ ------------------------ ------------------------ ----------
oamrepo2 Patch 119961 -06 Patch 119961 past-05
oamrepo1 Patch 119961 -06 Patch 119961 past-05
Result: check the system operation patch passed for " " Patch 119961 -05"
Check: the operating system patch for " " Patch 119964 -14"
Name of the requested node comment required
------------ ------------------------ ------------------------ ----------
oamrepo2 Patch 119964 -21 Patch 119964 past-14
oamrepo1 Patch 119964 -21 Patch 119964 past-14
Result: check the system operation patch passed for " " Patch 119964 -14"
Check for multiple users with the value of the UID 0
Result: Check for multiple users with the value of the UID 0 past
Check: The current group ID
Result: Control of current past group ID
Base file name consistency check model...
Check the consistency of spent Core file name pattern.
Check to make sure that the user "grid" is not in the group "root".
Name of State comment node
------------ ------------------------ ------------------------
oamrepo2 there is not past
oamrepo1 there is not past
Result: User "grid" is not part of the "root" group Check the past
--
Bala
Hi all
Problem solved.
I am running seperaely conditions of ".". "/ runInstaller - executePrereqs '
then installed using ". / runInstaller - ignorePrereq", which ignores the check prerequisites.
--
See you soon,.
Bala
-
When I downloaded Firefox and checked my extensions, I've been informed that Firefox is not compatible with the prevention of malware from my Webroot security package. I use it successfully with Windows and just renewed for another year. What do you do to protect myself? I'm not a computer expert, so if you can answer in plain language that would be appreciated. In addition, we stream video much and I noticed that DivX is also not compatible. What should I do about it? Thank you.
Firefox has had its own fake Web / since 2008 malware protection.
http://www.Mozilla.com/en-us/Firefox/phishing-protection/Firefox Add-ons developers are responsible for these add-ons up to date as new versions of Firefox are available. Check with Webroot & DivX on updates for their Firefox extensions.
That said, the modules that are hosted on the official website of the AddonsMozilla.Org are tested and 'hit' by compatibility automatically, if these modules are considered to be compatible with a new version of Firefox that is about to be released. For modules that are not "compatible", the developer of the add-on Gets an email telling them basically what needs to be fixed. AMO extensions hosted are automatically updated as required by Firefox. The 'check' available updates each time is that Firefox is open.
For modules that are not hosted on AMO, there is a 'updateURL' function that allows to have Firefox check for an update across the internet, the a particular extension developer said. Unfortunately, too many developers take advantage of this feature and needlessly let their users to search an update themselves. who then need to manually install the hotfix or update version.
It's like a bunch of clowns of circus without master ring to 'bring in the clowns' at the right time in the show.
-
Sony UWA-BR100 Wireless USB stick.
Hello. I bought a Bravia a year ago, which was ready wifi. I also bought a USB stick for wireless Internet. After a year Flash DRIVE suddenly stopped working. It was quarrantee anger so I had to pay for a new. I searched many shops plus some Internet stores, but nowhere in Greece sells! Not even Sony Hellas! IS THIS POSSIBLE? AFTER ONLY 1 YEAR AND I CAN NOT FIND ACCESSORY? 1 year average tv's NEW!
Hi, you can also contact sony ELECTRONICS HERMAN dealer to check availability and option for international shipping. Their address is
-
Where can I get a replacement for the Sony SRS-RF90RK battery
I have a Sony SRS-RF90RK and need a replacement battery
Battery Sony Rechargeable P-07/F23G1B Dc7.2V nickel Cadmium battery 700mAh
Hello digginlou
Welcome to the community of Sony.The speaker battery is not replaceable by the user.
You can contact electronic Andrews at 661-257-7700 to check availability of the battery.
You can also contact include the Distribution of parts to 800-638-3328 to check availability of the battery.Kind regards
Colby
Maybe you are looking for
-
USB Thumb Drive (UHYBS-064GH) format/write protection fault
Hello Hoping for help. Bought a 64 b USB Thumb Drive (UHYBS-064GH), a private seller, but the point is brand new in packaging. When I tried to copy files through him, he maxed out at comments 45Gig and seems to have caused a clerical error. I was abl
-
Document - (computer) target directory scanner
How can I change the address of the target directory of an analysis that is by default the value settings\NAME\My and c. \Documents Documents?
-
HP dc7800 Convertible Minitowers does not restart
I recently bought a used HP dc7800 Convertible Minitowers. It works fine, but there is a question I leave me puzzled: whenever I restart the computer through Windows, it will not start correctly. Sometimes it shows the HP splash screen and goes just
-
Required drivers for Hp 15 laptop computer r-033tx
Please provide drivers for Hp 15 r-033tx computer laptop for Windows 7 x 64 bit
-
No attachment shown in email when 1 is supposed to be there.
My friend sent me an attachment. It was supposed to be his contact to Outlook 2007 information. I use Windows Mail. There the trombone in the column attachment until I open the email, but when I opened the email it doesn't show an attachment. I mysel