Check btn is disabled in the display manage attachments for guest users

We observed that this (new) check-in button in a fixing solution eats is DISABLED in our UAT environment for users who do not have a specified group.

However this restriction is not in our dev environment (IE everyone can check in documents in dev).

Can you please ask us where is this deactivation is setup and how to remove it?

WebCenter content Imaging Version is 11.1.1.9

Found the fix,

UCM, one of the "role permissions" did not appear in the UAT environment.

Role AFWrite did not have the RW permissions.

Tags: Fusion Middleware

Error 404 - not found

Of RFC 2068 Hypertext Transfer Protocol - HTTP/1.1:

10.4.5 404 not found

Server not found anything matching the request URI. No indication is given whether the condition is temporary or permanent.

If the server does not wish to make this information available to the client, the status code 403 (refused) can be used instead. The 410 (Gone) status code SHOULD be used if the server knows, through a configurable mechanism, that an old resource is permanently unavailable and has no forwarding address.

When is a declare a view in faces-config Manager. XML accordingly with the tutorial: https://technology.amis.nl/2012/08/11/supporting-multiple-languages-in-adf-applications-backed-by-resource-bundles-and-p...

I have a stark call to a message in a pop-up window which is showned when I clicked on the modelled Logout button

If I Don t declare the display manager, it works (the popup is showned and redirects to the login page).

If I Don t display the context menu, it works (redirects to the login page).

by no reason i Don t know, they are incompatible, but I need them working.

JDev 12.1.3.0.0

any ideas guys?

Thank you

Angela

Hello

I ve just erased the action button (goToLogout), and it worked fine. A didn t of controlFlowCase there were more (goToLogout).

action = "goToLogout" actionListener = "#{LoginBean.doLogout}" targetFrame = "_self" / > "

action listener (LoginBean.doLogout) shows the pop-up message.

the dialogListener in the context menu when you click yesButton call the invalidate session and redirects to login page programaticaly.

It was rubbish in my code.

KDario thanks for your help, but you could never predict that in my code.

Can disable us the option of smoothing for quick selection tool?

Can disable us the option of smoothing for quick selection tool?
I can deselect with the magic wand, but not with the quick selection. Any ideas?
Thank you
Dominik

I don't think you can, but in the dialog box refine edge, you can use the contrast setting to get rid of most of the anti-aliasing.

MTSTUNER

PC can see and access the laptop without asking for a user name and password but the laptop cannot access the PC because it asks me a username and password that I don't know.

Vista - Windows 7 network connection. username and password is unknown.

Hello

I just got a laptop with windows 7 on it and I want to connect to my other PC for it, they are on the same network through a router. the PC can see and access the laptop without asking for a user name and password but the laptop cannot access the PC because it asks me a username and password that I don't know.

If someone could answer this question, it would be great.

Hello

Maybe this can help.

Win7 when configured on the peer-to-peer network has three types of configurations of sharing.

Group residential network = only works between Win 7 computers. This type of configuration, it is very easy to entry level users to start sharing network.

Working network = fundamentally similar to previous methods of sharing that allow you to control what, how and to whom the records would be shared with.

Public share = network Public (as Internet Café) in order to reduce security risks.

For the best newspaper of the results of each computer screen system and together all computers on a network of the same name, while each computer has its own unique name.

http://www.ezlan.NET/Win7/net_name.jpg

Make sure that the software firewall on each computer allows free local traffic. If you use 3rd party Firewall on, Vista/XP Firewall Native should be disabled, and the active firewall has adjusted to your network numbers IP on what is sometimes called the Zone of confidence (see part 3 firewall instructions

General example, http://www.ezlan.net/faq.html#trusted
Please note that some 3rd party software firewall continue to block the same aspects it traffic Local, they are turned Off (disabled). If possible, configure the firewall correctly or completely uninstall to allow a clean flow of local network traffic. If the 3rd party software is uninstalled, or disables, make sure Windows native firewall is active .

------------------------------

If your network consists only of Win 7 and you want a simple network, use it.

http://Windows.Microsoft.com/en-us/Windows7/help/videos/sharing-files-with-HomeGroup

After you have configured the homegroup, scroll to the bottom for the Permission/security section.

-----------------------------

Win 7 networking with other version of Windows as a work network.

In the center of the network, by clicking on the type of network opens the window to the right.

Choose your network type. Note the check box at the bottom and check/uncheck depending on your needs.

http://www.ezlan.NET/Win7/net_type.jpg

Win 7 - http://windows.microsoft.com/en-us/windows7/Networking-home-computers-running-different-versions-of-Windows

Win 7 network sharing folder specific work - http://www.onecomputerguy.com/windows7/windows7_sharing.htm

Vista file and printer sharing - http://technet.microsoft.com/en-us/library/bb727037.aspx

Windows XP file sharing - http://support.microsoft.com/default.aspx?scid=kb;en-us;304040
Sharing printer XP - http://www.microsoft.com/windowsxp/using/networking/expert/honeycutt_july2.mspx

Setting Windows native firewall for sharing XP - http://support.microsoft.com/kb/875357
Windows XP Patch for sharing with Vista (no need for XP - SP3) - http://support.microsoft.com/kb/922120

When you have finished the configuration of the system, it is recommended to restart everything the router and all computers involved.

-------------

If you have authorization and security problems, check the following settings.

Point to a folder that wants to share do right click and choose Properties.

In the properties

Click on the Security tab shown in the bellows of the photo on the right) and verify that users and their permissions (see photo below Centre and left) are configured correctly. Then do the same for the authorization tab.

This screen shot is to Win 7, Vista menus are similar.

http://www.ezlan.NET/Win7/permission-security.jpg

The Security Panel and the authorization Panel, you need to highlight each user/group and consider that the authorization controls are verified correctly.

When everything is OK, restart the network (router and computer).

* Note . The groups and users listed in the screen-shoot are just an example. Your list will focus on how your system is configured.

* Note . There must be specific users. All means all users who already have an account now as users. This does not mean everyone who feel they would like to connect.

---------------------

*** Note. Some of the processes described above are made sake not for Windows, but to compensate for different routers and how their firmware works and stores information about computers that are networked.

Jack-MVP Windows Networking. WWW.EZLAN.NET

I bought Adobe Acrobat DC. We use it in a desktop environment. Is there a way to "TURN OFF" the concept of cloud for another user does not see a confidential pdf in their queue?

Is there a way to "TURN OFF" the concept of cloud for another user does not see a confidential pdf in their queue?
I tried to contact technical support to the 800-833-6687 but was put through several automatic guests and disconnected.

Hi plumasca,

Refer to this topic for help disable features/services online in Acrobat/Reader DC?

Kind regards
Nicos

WHY THE PGA IS REQUIRED FOR EACH USER?

Hello everyone;
I have a question about PGA.

WHY THE PGA IS REQUIRED FOR EACH USER?

What I got from google...
Even if information analysis of SQL or PL/SQL is already available in the library of shared pool cache,
the value that the user want to execute the statement select or update cannot be shared.
I can't realize that someone can show an example of clear, if possible?
DB version is 10.2.0.4.0
OS: oracle linux 5.5
Thanks in advance...

PGA is memory private belonging to a specific user. This private memory contains of these pieces that is not supposed to be shared with others. For example, when you sort a part of the data, that does not mean all he wants too. If Oracle retains the sorted data requested by you in your own PGA. Similarly, if you want to query a table with a value of 10, it does not mean that all want the same thing. If these structures are stored in the PGA. For a more detailed description, read the link given by Hoek.

HTH

Aman...

How we happen to know that the number of presents for this user database
How we happen to know that the number of presents for this user database.
Both those who are connected and not connected yet.

Thanks in advance

Concerning
SUBJ.
using v$ session...

HP Pavilion with Vista: Matshita Dvd - ram UJ 861 H ATA Device is disabled in the Device Manager.

filter of device drivers are corrupt; class filter drivers are corrupt. I've already replaced the hardware player with SPARE HP 448005-001. With auto drive disabled, detection of new drivers is not past. This isn't a hardware problem. Computer, registry and Device Manager do not see this disc/device. Mats_run.dvd and Microsoftfixit50123 were used.

Hello

Drive or cable might have a problem.

Step 1: Please do all the same underneath if you did some before as is often total
a process that solves the problem.

Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
below.

Then, work your way through these - don't forget the drive might be bad, could be a coward
cable or slight corrosion on the contacts (usually for a laptop) and other issues.

Your CD or DVD drive is missing or is not recognized by Windows or other programs
http://support.microsoft.com/kb/314060 - a Mr Fixit

Try this fix manually if the Fixit 314060 does not work
http://www.pchell.com/hardware/cd_drive_error_code_39.shtml

Your CD or DVD drive is missing or is not recognized by Windows or other programs-
a Mr Fixit
http://support.Microsoft.com/kb/982116

The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
for Windows Vista
http://support.Microsoft.com/kb/929461

When you insert a CD or a DVD, Windows Vista may not recognize the disc
http://support.Microsoft.com/kb/939052

Your CD or DVD drive cannot read or write media - A Mr Fixit
http://support.Microsoft.com/GP/cd_dvd_drive_problems

CD/DVD drive does not appear in Windows Vista, or you receive this error in Windows
Vista installation after booting from the DVD (AHCI)
http://support.Microsoft.com/kb/952951
Drive CD - R or CD - RW Drive is not recognized as a recordable device
http://support.Microsoft.com/kb/316529/

Hardware devices not detected or not working - A Mr Fixit
http://support.Microsoft.com/GP/hardware_device_problems

Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
ends. Remove and replace, do not just tight. For laptops, you can often clean power and
contacts data with a pencil eraser.

Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

===============================

Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
do it right.

Did you follow the Troubleshooting Guide for the reader who still does not work? There are
the entries in registry that the troubleshooter does not solve and those who "might" be the cause.

Check with your Maker system and a device for the two possible firmware updates and
the correct registry entries for your car.

Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
the parameters.

HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

-----------------------------------------------------------------------

You can probably find more info here and maybe even the exact registry for your CD/DVD settings
drive from someone with the same model.

Forums - a lot of expert real help
http://Club.myce.com/

CD/DVD units
http://www.myce.com/storage/

Use DevManView to locate the CD/DVD in the registry (be careful and do a prior Restore Point)
nothing change) - find the DevManView device and then make a right click on it free in RegEdit.

DevManView - free - an alternative to the standard Windows Device Manager, which displays all the
devices and their properties in flat table, instead of the tree viewer
http://www.NirSoft.NET/utils/device_manager_view.html

I hope this helps.

Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

Backlight is disabled until the power management software is loaded on the Satellite M40 - 295

Greetings to all members of the forum.

I am owner of ten months a Satellite M40-295. My problem is the following:

When I start my computer the backlight is disabled until I go into Windows and the power management program is loaded.
After that the backlight of the screen lights up. I tried to change the brightness with Fn-F6/7 and screens using Fn + F5 without success.

Init information (init messages, such as the Toshiba and Windows logo) appears on the screen (I checked it under the intense light and the screen from another angle of view), so the adapter seems to work properly.

Thanks in advance

Hi Evangelos

I'm afraid that now, you have a problem. If the unit won't start the BIOS chip is probably damaged. In my opinion BIOS update was bad idea.

Right now I don't want write something on the screen because now it is not important at all. Please contact the customer Service of your country partner and let check the device. Sorry, but I'm 99.9% that the unit is now completely screwed.

If the appliance shows any sign of life is the case for the service. :(

Remove the display manager

Hello to all the community ! I hope I can find help here, I want to remove a handler of my screen because I'm painting information in the same screen, I have 2 ways to view the information (News), the first is 1 notice in time, in what I'm showing an image, the title of the notice, the date and description, the second is a list of all reviews I can show the first option I can change for the second option, no problem, the problem is that when I want to change the first option again, I have this message: java.lang.IllegalStateException: field added to a Manager if it is alreadyparented, I guess I have to remove the main Manager, because I use it to paint the information, can someone help me please.

Welcome to the forums.

Don't forget that managers can be and are used recursively, to remove all, you must remove the field directors and managers of their managers.

You should be able to determine the field that threw the IllegalStateException, and of that number on that delete, you did not.

You can also use . getManager() to find out if a field is related, and then remove it from the Manager identified if you want to reuse the field.

My computer will not sleep, the display shuts off for a while but the fan still works and the keyboard lights stay on, and then eventually he dies just

Imen quite so much as the title, when I try to put my computer to sleep the screen turns off but the computer is still running. My computer is a HP pavilion dv6 is a little more than 3 years. He used to do whenever a while, but now it's every time I try to pause. I'll close the top cover, but the fan still works, the hp on the lid logo light remains lit, and if I reopen it cover the power light is always on and the lights on the keyboard caps lock and wireless keys. The same actions occur when I try to put it to sleep manually (from the start menu). It does not at all I have to do another that now hold power, but even when I do nothing, it will stay here like this for awhile and then just turn off completely.

When it starts up, it gives me the options to start in safe mode or start normally, and when I am connected and it gives me the "windows has recovered from an unexpected shutdown", I see that there is a minidump file in windows that has something to do with it. I tried to search for the file and the problem together, and then each separately, but nothing I've seen described really my problem, so I thought I should just ask on my problem.

I read what made other people, changing advanced power settings, changing the media settings, etc. and did those things, but to no avail. It's not a huge deal, because I can just turn off my computer whenever I'm done with it for now, but I don't know if it's a bad omen for the future of my poor computer. So if someone could give me a hand with this point in mind, I'd be very happy. Let me know if provide more details (OS, processor, my favorite color, social security number, etc.) that would make it easier to solve. Thank you

Also, either by the way, if this is in the wrong forum topic, please let me know.

If you use a wireless keyboard or mouse to your computer, these items can keep your computer enter standby mode automatically because they constantly send a signal to the system, thus preventing downtime. An optical mouse (that changes color) causing a similar problem.
- 1
  
  Click "Start," "Control Panel", "'material and his ' and 'Device Manager'."
- 2
  
  Double-click "Network adapters", then right-click on your network device. Click 'properties '.
- Sponsored links
  - Analysis software of CAN
    
    Economic and powerful CAN bus analysis and diagnostic software.
www.CANCapture.com
3

Click on the "Advanced" tab and scroll down the list of 'Property' to find all entries beginning with "Wake up" or "Wake up" in the entry. Click once on these entries and in the drop down box at the top right make sure it says 'None' or 'off '.
4

Click the "Power Management" tab at the top and make sure that the "allow this device to wake up the computer"is not checked. " Click on 'OK '.

Mouse

5

Open Device Manager, as above, and then double-click "Mouse" or 'mice and other pointing devices' right click of your mouse, and click 'properties '.
6

Click the "Power management" tab and make sure that the "allow this device to wake the computer" is disabled.

Disable the redirection of printer for remote users only

Hi we have a customer's requirement that when users connect to the view platform 5.2 internally (via PCoIP) they are able to get both printers mapped with GPO printing location and all locally connected usb printers. However, when a user is working from outside the LAN you must disable the printer redirection all - they don't want sensitive documents outside of the office printing.

What is the best way to achieve this?

In case anyone is interested, I managed to solve this problem using a vbs script, executed using the agent to view GPO RunOnConnect. He questions the volatile environmental variables for the name of the view server connection external access. and if it matches then verifies membership in a group. If not a member of the remote-printing-authorized group it disables services of thinprint.

strComputer = "."
Set objNetwork = WScript.CreateObject("Wscript.Network")
Set objSysInfo = CreateObject("ADSystemInfo" )
strUserDN = objSysInfo.userName
Set objUser = GetObject("LDAP://" & strUserDN)
Set objWMIService = GetObject("winmgmts:\\" & strComputer & "\root\cimv2")
Set objShell = CreateObject("WScript.Shell")

'--------------------------------------------------------
' IsMember Function
'--------------------------------------------------------
Function IsMember(strGroup)
' Function to test one user for group membership.
' objUser is the user object with global scope.
' strGroup is the NT Name of the group to test.
' objGroupList is a dictionary object with global scope.
' Returns True if the user is a member of the group.

Dim objGroup
If IsEmpty(objGroupList) Then
   Set objGroupList = CreateObject("Scripting.Dictionary" )
   objGroupList.CompareMode = vbTextCompare
   For Each objGroup In objUser.Groups
      objGroupList(objGroup.sAMAccountName) = True
   Next
End If
IsMember = objGroupList.Exists(strGroup)
End Function

'--------------------------------------------------------
' Check to see if client logged into external View Connection Servers
' Disable printing if not member of AD Group remote-printing-allowed
'--------------------------------------------------------
If objShell.ExpandEnvironmentStrings("%ViewClient_Broker_DNS_Name%") = "GR1VCSV01.domain.net" _
Or objShell.ExpandEnvironmentStrings("%ViewClient_Broker_DNS_Name%") = "GR1VCSV02.domain.net" _
Then
If IsMember("remote-printing-allowed") Then
   echo "Virtual Printing Enabled"
Else
Set colServiceList = objWMIService.ExecQuery _
    ("Select * from Win32_Service where Name = 'TPAutoConnSvc' OR Name = 'TPVCGateway'")
For Each objService in colServiceList
    If objService.State = "Running" Then
        objService.StopService()
        Wscript.Sleep 5000
    End If
    errReturnCode = objService.ChangeStartMode("Disabled")
end if
end If

Cannot change resilusion of the screen, the display is great for my screen

I have an older IBM flat screen. computer called generic PnP

Try to change the DPI settings:

How to change the display DPI scale in Vista
http://www.Vistax64.com/tutorials/84233-DPI-scaling.html

After the default scale, you will not be able to see the OK button to make the change, in this case just press the key "Enter" on the keyboard.

Check btn is disabled in the display manage attachments for guest users

Similar Questions

Error 404 - not found

Of RFC 2068 Hypertext Transfer Protocol - HTTP/1.1:

10.4.5 404 not found

Maybe you are looking for