Check Geniune copy

Similar Questions

• A Windows Explorer copy operation check after copying?

  A Windows Explorer copy operation check after copying?  I know that this should be an easy question to answer and I should already know the answer, but I can't find any info that confirms or not copy files and folders with Windows Explorer checks the copy after copying.

  I want to copy the contents of my old memory stick in my new and I want to make sure that all files and folders have made the transfer before their deletion on the old stick.

  I guess I could use the command line COPY or XCOPY between devices with the /V to check the switch.  I don't see that ROBOCOPY has a switch to check.

  Suggestions?

  There is no real way to verify with certainty that copies has been made correctly and that the copied files are all accessible, guaranteed the same as original, uncorrupted and otherwise to work.  Here is information on the switch/v:http://support.microsoft.com/kb/126457/en-us.  The BACK FC command (from the command prompt) is a better way to comparehttp://www.easydos.com/fc.html (or even the model commandhttp://www.windowsvistauserguide.com/command_line/command_line_comp.htm which is not as good as the FC command but not yet a comparison, but is not yet perfect (and it makes the whole process much longer and requires much more effort).  It is very unlikely that all copied very well - but there is no real control procedures which will ENSURE everything worked properly and that all the files can be opened and worked with.  The only way to be absolutely sure is actually check each file individually (and again, the new stick could develop the corruption of its own and damage one or more of the files even after you have confirmed it - it doesn't happen often, but it happens).  It's the nature of computers and storage devices.  If you are concerned, and then also copy the old stick on your computer in a special folder (I do with mine, just in case and I also back up this folder so it is even more protected).  Copies of chances of two (or three) is damaged or having problems are even more remote, and you have a backup (or two) in case something happens on the key (as you drop down a sewer or it gets crushed by a car or is exposed to a strong magnetic field that he wipes clean you'll just lose it or any number of other possible problems).

  I hope this helps.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• All of a sudden, not a geniune copy of windows 7?

  My mother in law computer suddenly had repeated message that hers is not a genuine copy of windows, even if she had this laptop for a few years. I can run Windows Update on his machine and see the product ID, but when I go to enter the ID, it doesn't allow it.     I ran this report on her cell:

  Diagnostic report (1.9.0027.0):
  -----------------------------------------
  Validation of Windows data-->

  Validation code: 50
  Code of Validation caching online: 0x0
  Windows product key: *-* - QCPVQ - KHRB8-RMV82
  Windows product key hash: + Rj3N34NLM2JqoBO/OzgzTZXgbY =
  Windows product ID: 00359-OEM-8992687-00095
  Windows product ID type: 2
  Windows license Type: OEM SLP
  The Windows OS version: 6.1.7601.2.00010300.1.0.003
  ID: {7318EEEB-113F-4D98-9AA5-9E1A39DF6B7D} (1)
  Admin: Yes
  TestCab: 0x0
  LegitcheckControl ActiveX: N/a, hr = 0 x 80070002
  Signed by: n/a, hr = 0 x 80070002
  Product name: Windows 7 Home Premium
  Architecture: 0 x 00000009
  Build lab: 7601.win7sp1_gdr.130828 - 1532
  TTS error:
  Validation of diagnosis:
  Resolution state: n/a

  Given Vista WgaER-->
  ThreatID (s): n/a, hr = 0 x 80070002
  Version: N/a, hr = 0 x 80070002

  Windows XP Notifications data-->
  Cached result: n/a, hr = 0 x 80070002
  File: No.
  Version: N/a, hr = 0 x 80070002
  WgaTray.exe signed by: n/a, hr = 0 x 80070002
  WgaLogon.dll signed by: n/a, hr = 0 x 80070002

  OGA Notifications data-->
  Cached result: n/a, hr = 0 x 80070002
  Version: N/a, hr = 0 x 80070002
  OGAExec.exe signed by: n/a, hr = 0 x 80070002
  OGAAddin.dll signed by: n/a, hr = 0 x 80070002

  OGA data-->
  Office status: 109 n/a
  OGA Version: N/a, 0 x 80070002
  Signed by: n/a, hr = 0 x 80070002
  Office Diagnostics: 025D1FF3-364-80041010_025D1FF3-229-80041010_025D1FF3-230-1_025D1FF3-517-80040154_025D1FF3-237-80040154_025D1FF3-238-2_025D1FF3-244-80070002_025D1FF3-258-3

  Data browser-->
  Proxy settings: N/A
  User Agent: Mozilla/4.0 (compatible; MSIE 8.0; Win32)
  Default browser: C:\Program may Explorer\iexplore.exe
  Download signed ActiveX controls: fast
  Download unsigned ActiveX controls: disabled
  Run ActiveX controls and plug-ins: allowed
  Initialize and script ActiveX controls not marked as safe: disabled
  Allow the Internet Explorer Webbrowser control scripts: disabled
  Active scripting: allowed
  Recognized ActiveX controls safe for scripting: allowed

  Analysis of file data-->

  Other data-->
  Office details: {7318EEEB-113F-4D98-9AA5-9E1A39DF6B7D}1.9.0027.06.1.7601.2.00010300.1.0.003x 64*-*-*-*-RMV8200359-OEM-8992687-000952S-1-5-21-2993165343-1125994933-3024911074Dell Inc.. Inspiron 1545 Dell Inc.. A05 20090225000000.000000 + 000E5FD3907018400FA04090409Time(GMT-05:00) Standard is03DELL M09 109

  Content Spsys.log: 0 x 80070002

  License data-->
  The software licensing service version: 6.1.7601.17514

  Name: Windows 7 HomePremium edition
  Description: operating system Windows - Windows (r) 7, channel OEM_SLP
  Activation ID: d2c04e90-c3dd-4260-b0f3-f845f5d27d64
  ID of the application: 55c92734-d682-4d71-983e-d6ec3f16059f
  Extended PID: 00359-00178-926-800095-02-1033-7601.0000-0172014
  Installation ID: 002152813615821834497483235882313286043500930071623320
  Processor certificate URL: http://go.microsoft.com/fwlink/?LinkID=88338
  Machine certificate URL: http://go.microsoft.com/fwlink/?LinkID=88339
  Use license URL: http://go.microsoft.com/fwlink/?LinkID=88341
  Product key certificate URL: http://go.microsoft.com/fwlink/?LinkID=88340
  Partial product key: RMV82
  License status: Notification
  Reason for the notification: 0xC004F07C.
  Remaining Windows rearm count: 3
  Trust time: 16/04/2014 19:47:44

  Windows Activation Technologies-->
  HrOffline: 0x00000000
  HrOnline: 0xC004C533
  Beyond: 0 x 0000000000000000
  Event timestamp: 4:16:2014 19:23
  ActiveX: Registered, Version: 7.1.7600.16395
  The admin service: recorded, Version: 7.1.7600.16395
  Output beyond bitmask:

  --> HWID data
  Current Hash HWID: LgAAAAEAAQABAAIAAAABAAAAAgABAAEAJJSCFdhV2jMUuHYOKB9UbSjlFJcqhQ ==

  Activation 1.0 data OEM-->
  N/A

  Activation 2.0 data OEM-->
  BIOS valid for OA 2.0: Yes
  Windows marker version: 0x0
  OEMID and OEMTableID consistent: Yes
  BIOS information:
  ACPI Table name OEMID value OEMTableID value
  REFERENCE DELL M09 APIC
  FACP DELL M09
  HPET DELL M09
  MCFG DELL M09
  M09 DELL SLIC
  SSDT PmRef CpuPm

  If the laptop came with Windows pre-installed from Dell, find the 25 character product key (at the bottom of the laptop or the battery box, you may need to remove the battery) then try the following methods:

  (A) Comment activate Windows 7 by Internet
  1) click Start and in the search for box type: activate
  2) click on the 'Activate Windows' option at the top of the list
  3) click on "now, activate Windows online.
  (4) enter your 25-character product key (not case sensitive)
  5) click "Next" and wait for the key must be verified.

  Another method: Start/Control Panel of configuration/system and security/system /.
  Now, scroll down and click on
  'Product key change' or 'Windows enable in x days '.

  (B) Comment activate Windows 7 or Vista manually (activate by phone)
  http://support.Microsoft.com/kb/950929/en-us

  1) click Start and in the search for box type: slui.exe 4
  (2) press the ENTER"" key.
  (3) to select your "country" you are in the drop-down list.
  (4) choose the option "activate phone".
  (5) stay on the phone * do not select/press any option * and wait for a person to help you.
  (6) explain your problem clearly to the support person.
  (7) the person must give you a confirmation ID, copy it down on paper,
  (8) check that the ID is correct in reading the support person.
  (9) to enter the ID number, then click 'Next' to complete the activation process.

  Activation and registration of a Microsoft product
  http://support.Microsoft.com/?kbid=326851
  Windows activation: (888) 571-2048
  (888) 725-1047 or 800-936-5700

  What's the relationship between activation and genuine Windows?
  http://Windows.Microsoft.com/en-in/Windows7/what-s-the-relationship-between-activation-and-genuine-Windows

  What is the validation, and how does it work?
  Windows 7: http://windows.microsoft.com/en-us/windows/help/genuine/what-is-validation?os=win7
  Vista: http://windows.microsoft.com/en-us/windows/help/genuine/what-is-validation?os=winvista

  Authentic Microsoft software program privacy statement
  What data is collected?
  http://Windows.Microsoft.com/en-us/Windows/genuine/privacy-statement

  -Product key of letters and numbers-

  Not confused the letter B with the number 8, the letter Q with the letter O.
  the letter G and the number 6.

  A, E, I, O and u are not used.

  -----------------------------------------------------------------------------------

  J W Stuart: http://www.pagestart.com

• lost geniune copy of windows and also activation key... !!

  I am premium windows 7 with my laptop in 2009. recently I hav also lost the copy of windows and restore. Also the product key sticker has been torn. Now, tell me how to recover windows original return. :? :(

  -If the recovery partition is damaged

  -Sticker COST is broken or missing

  -So you have no proof of purchase.

  You will need to purchase a new license;

  Windows 7 - version comparisons:

  http://Windows.Microsoft.com/en-us/Windows7/products/compare-editions

  MS Windows 7 store price:

  http://store.Microsoft.com/Microsoft/Windows-Windows-7/category/102

  or you can wait on Windows 8, which will be available this October 26, 2012

• I forgot to check the details proof box on the copy... process need to workaround

  We drove on our fiscal year via the copy of planning process (version 11.1.2.1). In a rush, I did the copy without checking the copy on the detailsboite of support.
  
  Users in the new budget have already made their adjustments to the budget so I can't restart the copy process (or can through the export of existing data, make the copy, and then re-import the new data?)
  
  Looking for ideas/thoughts on how to turnaround the supporting details.
  
  JTS

  How do you export the supporting details using LCM, you will need to filter the xml and then update it to point to the new POV and import. You need to make sure you filter all the detail information support that you are not interested from the XML.

  See you soon

  John
  http://John-Goodwin.blogspot.com/

• Set repair on bootleg copy of XP and I have no XP disc

  I let someone work on my cpu when I was not working right and the difficulty that they put a bootleg copy of xp home on and did without asking me what I can do I don't have my xp disc I can reset with out factor or I am scrowed?

  You can see if you have a recovery on your computer Windows XP partition, if you have a preinstalled version of Windows XP. . However, if it has been reinstalled, it may have cancelled all your partitions.

  I have included information about the software to Microsoft Geniune copy.
  Otherwise, you should see if you can determine your product key and activate with this product key.
  http://Windows.Microsoft.com/en-us/Windows/help/genuine/FAQ

  I hope this helps.

  Marilyn

• How can I get my copy saved Windows XP with the return to lose all current data?

  I had my PC worked on so I could play better. This tech guy did some work was right but put windows xp pro service pack 3. on this subject. He said it was legal and he went from checking. He did it for about 6 months. I lost my power in a storm and when I succeeded him and pulled upward it did not check my copy of 'registered '.

  Hi Maddmaatt,

  Thanks for posting. A few hardware changes may report a reactivation of your OS. To activate XP as he asks and take the phone option. The helpline can provide you with the new activation keys.

  I hope this helps! Shawn - Support Engineer - MCP, MCDST
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• Is it possible to synchronize the copied file in the local folder with the original file in the network?

  Hello

  I copied a file from the shared network folder and it is really important document, so I need to use this file as a file off the local drive connection and backup as well just in case where the cause accidental, but I don't want to save it each time and don't want to use the original file in the network.

  Is it possible to automatically synchronize the copied file in the local folder with the original file in the network?

  Thank you

  Absolutely without interruption would require a program to write that monitors files on the file locks and triggers a sync as soon as he sees a change.  So, since we cannot just write a program, the best thing is either:

  (1) an icon on your desktop that you can click each time you want to synchronize "synchronize my files now.

  or

  (2) plan the "my sync files' to run automatically every x minutes.  It could be a batch script that checks to see if the file is more recent and copies only files that have changed.  Although perhaps a little aggressive, you could plan this thing check-and-copy-a batch file - again to run every 60 seconds.

  Batch files allow you to control the operations very directly, but Microsoft has also made a (not supported) tool called SyncToy who does all the same things, but has a graphical interface to select your options. It can be programmed to run automatically on a schedule.

• Do not get the option "save image under" right click on an image to copy

  Original title: it seems the end that whenever I have an update something is turned off. T

  Lately, it seems that whenever I have a something update is turned off. On this occasion, it is my attempts to copy free images. Is there a simple solution?

  Hello Ron,

  Thanks for your reply, appreciate the time taken by us keep up to date on the State of the question.

  I would be grateful if you can provide us with the following information to help us better understand the issue.

  1. You mentioned that "save image under" option highlights not, are you able to copy the image of the command "Ctrl + C"?
  2. This problem is specific to the copy of the images only? You are able to copy texts and other content?
  3. Is the issue limited to a browser (such as Internet Explorer) or you are not able to copy anything on the computer?

  Sometimes, this kind of unexpected behavior indicated by Windows because of some important system files missing or corrupt. I suggest you to run the SFC/scannow Microsoft System File Checker tool to analyze the integration of system and fix any corruption.

  The command sfc/scannow (System File Checker) analyses all protected system files and replaces incorrect versions with appropriate Microsoft versions.

  Use the System File Checker tool to troubleshoot missing or corrupted system files.
  http://support.Microsoft.com/kb/929833/en-us

  Check the copy images and texts after running SFC scan and let us know the results. Do not hesitate to write back for any further assistance with Windows, we will be happy to help you.

• Just finished a clean install of Photoshop CS6 on my Mac Book Pro Yosemite and Adobe Application Manager does not and cannot install a new copy of Adobe

  Just re-installed a fresh copy of Photoshop CS6 on my Mac Book Pro Yosemite and somehow the Adobe Application Manager does not work and so can't check my copy.  What should I do?

  I get a message saying that Adobe Application Manager can be damaged and that I should install a new version of the MAA.  But after downloading a new copy of MAA and makes installation, the program (AAM) will still not installed.  It's like an infinite loop!

  Please, someone help!

  Thank you!

  HI gener7!

  I'm sorry but I'm not on creative cloud.  I'm still on CS6 and it was Adobe Application Manager was not working and I could not install the update to this application.  My AAM version is: 8.0.0160

  The link you provided was the update I wanted to install but it does not work.  A window will appear during the installation that says:

  We encountered the following problems.

  Setup could not initialize.  Please download Adobe Support Advisor to detect the problem.

  and then the link to Adobe Support Advisor that leads to a page "Adobe Support Advisor has been abandoned".

  Thank you!

• Theme not copied when using the application creation wizard

  Environment: -.
  Request Express 4.2.1.00.08
  Oracle 11 g Enterprise 2
  Browsers: Firefox, Chrome and IE
  
  Problem: -.
  We store themes standardized in a fictitious application for use in the development of new applications. We no longer seem to be able to copy these themes in an application when you use the create application wizard. A completely different theme is copied to the new application than the one selected in the wizard.
  
  Process: -.
  The steps in the wizard to create an Application are: -.
  Step 1 method - database
  Name of the step 2 - accept default
  Step 3 Pages - accept default values
  Step 4 shared - components check the "copy shared components. Choose an application with several themes in there and let "User Interface issues".
  Step 5 themes of components shared - select a standard theme by default, validate Yes
  Step 6 attributes – accept the default values
  Create the Application.
  
  The copied into the shared components in the new application is theme 26 productivity, not the theme selected in step 5. Productivity 26 theme was not a theme in the original application. In other tested environments, 21 Scarlet has been copied to the new application (even if 21 Scarlet does not exist in the original application).
  
  I can reliable reproduce this in a number of different test and development system, using different browsers. I can reproduce the problem on apex.oracle.com using a sample application as the source application (although if you select theme 25 you will need enable validation off in step 5 theme 25 will not be successful validation due to lack of a model of login page - which seems to be a separate issue).
  
  Is this a problem known elsewhere, is a generic problem in 4.2.1?
  
  Concerning
  
  Paul

  Hi Paul,.

  Thank you for raising this issue. He has already been addressed in development, and is followed with bug * 16607687 *. The fix will be available in our next release, 4.2.2.

  Kind regards
  Hilary

• Copy the text in the pdf format gives me gobbledygook. Is there a way to OCR to correct?

  I have some documents that are complete gibberish when I select the text and copy. If I open them in Acrobat Pro, select text, copy and "Show clipboard" in the Finder, I see a lot of 'skull characters', and if I open them in the preview and do the same thing, I see strings of points. The text in the Clipboard may not intelligible stuck being in any other program, and I can't find the document.

  Some of these documents were downloaded from commercial sites. One of them is from (I think) OCR'ing has scanned the document using ClearScan. An example of such a document is at https://public.me.com/ix/alanterra/Reynoso%202006%20p%201.pdf?disposition=download+1317001 233647 (small, 55 K).

  It seems to me only one way to do this is to convert the document into a "scanned" pdf, then OCR it. But the only way I can understand how this is the image of each page separately in Photoshop and then assemble the pages into a new document.

  There must be a way to solve this problem.

  Any thoughts?

  A

  PS - If you look at the document linked to above, you will notice that the text in the footer is consistent, but not the text in the body of the document.

  You will be able to use the OCR in Acrobat after you convert the outline type. You will need to add transparency, then use the Flattener Preview to expose your type. Here are the steps (for Acrobat 9):

  1. the document > watermark > Add (add a text watermark, press the SPACEBAR once).

  2 advanced > Print Production > overview of flattening > convert all text to outlines text (box). Record.

  3. the document > OCR text recognition > recognize text using OCR. Select all text with the text tool, copy.

  This method is not perfect, you will need to check the copy to find errors.

• How to check the permissions of security using OLE or javascript?

  I'm checking the security permissions in a PDF file using OLE or javascript.  Any help or examples would be very helpful.  A similar position said that you can NOT get the permissions via javascript.  Is this true?

  My end is set to check is "Copy of content" permission is allowed before you try to "Save as text", otherwise a dialog in Acrobat and the script hangs until the dialog box is clicked.  A way to remove the dialog box would be useful.

  It there is no way to remove the dialog box, nor can you get the permissions.

• Copy the file problems

  First of all, my problem is the following. I know that the only way to copy a folder

  is to create a new folder where you want to copy the original file and copy each file bakary

  and then delete the old file... for some reason my copy seems to be failing. Here's the code.

  function moveItems (fName, pNum) {}
  
  Temp1 = new File('/p/toConvert/regular/'+fName+'/ImageProperties.xml');
  fileObject = new Folder("/p/toConvert/Done/"+pNum+"/"+fName);
  
  {if (fileObject.Exists)}
  check = temp1.copy (' / p/convert/do / "+ pNum + ' / ' + fName);
  Alert (Check);
  return;
  } else {}
  Alert ("not here");
  }

  {if (Check)}
  Temp1. Remove();
  }
  return;

  
  Temp1. Remove(); works and removes the old file, however my alert said that the test failed, although remove worked so that we know temp1 exists, and since fileObject.exists has been spent to get the alert... I have no idea of what the case is, it will not just copy. Any help would be appreciated, thanks.

  It is the logic of your if statements. You test if the file exists before copying, but not after. And it is difficult to say without seeing all of your code, but you might want to change it (check) if (check == true)

  But I think the key is to not to use the true/false returned by copy. Test to make sure that the file exists before deleting the old.

  var f = new File('/c/temp/-_01-2_-.jpg');
  var fCopy = new file ('/ c/temp 3 /-_01-2_-.jpg ');
  f.Copy (fCopy);
  If (fCopy.Exists) f.remove ();

• APEX 3.2 copying the model Vertical Type 2 (including null values)

  I have normally do not change only by default APEX models, but rather to make a copy and edit my version with what I want to do.
  
  In the reports to a SQL report attributes TAB, I start using the "default report: vertical, look2 (include the Null columns)" for my report. I went to shared components, make a copy of the model that has been referenced in my application. (Took me by surprise, but he appeared in lists) When I go to replace the expression with the new COPY of the template, it is not in the LOV for models. I checked the copy worked and it is present if I show all THE MODELS...
  
  Why it displayed verses list reports?
  
  Can the attributes of reports / Tempalte LOV reports updated to include my new model?
  
  Thanks - Jim

  I start by using the "default report: vertical, look2 (include the Null columns).

  default: report models are hardwired into APEX and cannot be changed the way the theme templates can.

  >
  In the reports to a SQL report attributes TAB, I start using the "default report: vertical, look2 (include the Null columns)" for my report. I went to shared components, make a copy of the model that has been referenced in my application. (Took me by surprise, but he appeared in lists) When I go to replace the expression with the new COPY of the template, it is not in the LOV for models. I checked the copy worked and it is present if I show all THE MODELS...

  Why it displayed verses list reports?
  >

  Models 'appear' under lists will list templates, not report models. Any similarity of name to a default: model report is a coincident.

  Can the attributes of reports / Tempalte LOV reports updated to include my new model?

  It will show only integrated default: / export: templates and report from the current theme templates.

  Using the web Inspector in a browser with the tools of development such as Safari or Firefox + Firebug you can look at the source of the report with a default: model to determine the HTML structure and classes used and applied by the APEX CSS selectors, so either replace these in a your own style sheet, or create a custom theme version of the model from scratch.