Is it possible to synchronize the copied file in the local folder with the original file in the network?

Similar Questions

• Ability of blackBerry Smartphones to synchronize the network time has been lost

  Hello world

  Until very recently, I had the possibility to synchronize the time with the BlackBerry network and the mobile network (3 Australia). Both worked fine as I Express put an incorrect time, and then synced with both of them.

  This now seems to have stopped as his network saying time is not available.

  I tried turn this option off and turned on, tried a battery pull, searched everywhere I see etc.

  Is there anything else that could affect the ability to synchronize the time with the network

  Thank you

  Paul

  Interesting. I went just manually the phone 2 g (because I was doing a long call in a 3G area low and I didn't want to cut out), and when I turned it to 3G and 2G was back at the time of the network.

  Paul

• ColdFusion CFFTP copy of the file from the remote server and save to a local folder with the same file name

  Is it possible to copy a file from a remote ftp server to a local folder, while retaining the original file name? Please note: the file name on the remote server is not always the same.

  This article from Adobe might be useful.  (I was tempted to use LMGTFY; but I do not have).

  V/r,

  ^_^

• The VM cannot copy files from a network share on the host

  I get the error "unable to copy xyz123: cannot read from the source file or disk.» When you try to copy a file to a shared folder.

  • The shared folder is located on the machine called VM-SERVER, which runs in Workstation 6.0.4. The folder is shared with everyone having full control. Security settings say that DOMAIN\Domain users also have complete control.

  • Any user who connects to any guest VM on VM-SERVER, which is the host of all the VMS in the Organization, can not access the file for copying, although registration to the directory is there (although slow to come). If the same user connects to any other computer on the network, any computer of VM-no-prompt, then he can access the files on the share on VM-SERVER with no problems.

  • VM' are the guest all configured with Bridged networking like they serve other users on the network. I disable the VMWare adapters. I insert the DisableDos key with a value of 1 as indicated by the FAQ, I restart the VM host operating system and the virtual computer guests.

  • VM-SERVER running Windows Server 2003 R2 x 64. It has 2 1 TB SATA drives, and the action in question is physically located on the D: drive.

  • The VM guest OS are XP Sp3, Vista Sp1, Windows Server 2003 R2 x 32 Business.

  • None of these comments VM are able to access the contents of the files on the share on VM-SERVER.

  • All computer virtual guests are able to access shares located on another server, the primary domain controller of the network that is running Windows Server 2003 R2 x 32.

  Accordingly, I'm worried because the concept of the virtual computer for critical business was my decision and up to the exception of this scenario (and a recently resolved USB printing problem) it went well. Unfortunately even a mess can stop production.

  Note that I have read the FAQ and tried the suggestions that seemed to apply.  I also looked in the forums and haven't seen a specific question/answer.  If there is an answer out there and you read this point please make me, orperhaps you have another suggestion?  I am open to all theories and possible solutions.

  jorilla wrote:

  The card is a RealTek RTL8139/810 x Family Fast Ethernet NIC driver 5.699.717.2008 Version

  Maybe see if a new NIC driver help? I see that 5.707 (2008/11/24) seems to be available:

  http://www.Realtek.com/downloads/downloadsView.aspx?langid=1&PNid=6&PFID=6&level=5&Conn=4&DownTypeID=3&GETDOWN=false

  ====

  Is there anything in the event logs of the host?  I know that before I did this DisableDOS registry change on my server I've seen a lot of errors in the event log.

• Is it possible to synchronize the 'smart' collections of LR LR mobile office?

  I know how to synchronize mobile LR LR Office Standard collections but can't seem to find a way to use smart collections in the same way.  I can change on the fly smart collection rules, but cannot do the same for standard collections.  While we are on this topic (synchronization of the collections)... why the ability to sync-to-mobile is not under Services to publish? and why is it not possible to synchronize one or more collections of one or more catalogs... at the same time?

  The ability to synchronize smart collections is the most requested feature on the official forum of feedback to Adobe.  Please add your vote and opinion on this subject: Lightroom: syncing ability of smart Collections in Lightroom Mobile / lightroom.adobe.com.  Who will be (modestly) make it more likely that Adobe will give priority to its implementation.

• Is it possible to synchronize the address book of bird-T with the address book in gmail?

  I know now that has no way to sync T-Bird directly addresses a process in 2 steps using Google Mail with my iphone unless application. How to configure this on T-Bird?

  Your address book is a collection of address books, such as the collected addresses and to personal address book. Yes, we must create a new address book for each external address book with that synchronize you.

  I run two address books google, each with its own counterpart in Thunderbird. One e-mail, another for use in my phone that is used for addresses phone numbers rather than by e-mail. I don't want my email list on my phone.

  If you email messages Thunderbird using typing and semi-automatic n so it doesn't matter which of your books addresses one address is taken.

• Is it possible to synchronize the Windows with I Phone 5 Library?

  Original title: Microsoft Library

  I have an Iphone 5 and it is configured with photo stream. The photos are synced to my laptop. When I delete the photos from my iphone 5 they automatically deleting the file of photo stream on my laptop. The problem is that a library file has been implemented for this also. This does not remove automatically. I have to delete manually. Is anyway to sync my Iphone 5 too?

  Hi Doug,.

  I would like you to contact Apple for assistance.

  Check out the link-

  http://www.Apple.com/support/

  You can also post your request in the communities of Apple forums.

  Check out the link-

  https://discussions.Apple.com/index.jspa

  Let us know if you have other questions about Windows in the future. We will be happy to help you.

• Is it possible to synchronize the SFDC and Eloqua users?

  I know that I can create an automatic synchronization to download SFDC users; However, it is not a user Table in Eloqua (Eloqua customer s US have access, in any case). I guess it's impossible?

  This would be really useful for the creation of new sellers in Eloqua on the fly, their updating, deletion, when they left, etc.. With Salesforce.com being the registration system, this reduce manual processes, clean the data and effectively enable and disable users. Still, this would allow Signature rules for customization of Email to bring more quickly.

  We are of course we can not synchronize users? I created in an AutoSync yesterday and noticed the ability to import into a table "users" Eloqua. Here's the Eloqua dashboards and not Salesforce ones (Contact, company, Outlook, data cards, etc.). See the screenshot below...

  

• Can I synchronize the counters on two different computers in the C API?

  I installed the M-series cards (6254) in several computers. I would like to synchronize the counters for each card.  The best way that I came with to do this was to have the counter on each counter entries read a common external clock signal running at 10 KHz I have would then feed a second signal to each card and trigger the task that runs each counter starts when the second line goes high.

  Following the examples provided with the C API, it was easy to get each card KHz signal and then to match the beginning of the counter that I tried to read

  DAQmxCfgDigEdgeStartTrig (taskHandle, inputLineStr, DAQmx_Val_Rising);

  However, this did not work and gave me the following error:

  DAQmx error: the specified property is not supported by the device or is not applicable to the task.
  
  Property: DAQmx_StartTrig_Type
  
  Task name: task
  State code:-200452
  
  End of the program, press the Enter key to exit
  
  

  I know it's very simple sync the cards within a computer using the RTSI interface, but it is not possible that my cards have to reside in different computers.

  It is even possible to synchronize the counters on computers, and if yes how can I do it with the C API?

  ------------------

  Here's what I've written so far:

  
  
  
  
  #define DAQmxErrChk (functionCall) if (DAQmxFailed (error = (functionCall))) goto error; on the other
  int main (void)
  
  {
  
          int         error = 0;
  
          TaskHandle  taskHandle = 0;
  
          uInt32      data = 0;
  
          tank        errBuff [2048] = {'\0'};
  DAQmxErrChk (DAQmxCreateTask ("task", & taskHandle));
  
          DAQmxErrChk (DAQmxCreateCICountEdgesChan(taskHandle,"/Dev1/ctr0","",DAQmx_Val_Rising,0,DAQmx_Val_CountUp));
  
          DAQmxErrChk (DAQmxConnectTerms ("/ 10MhzRefClock/Dev1", "/ PFI8/Dev1", DAQmx_Val_DoNotInvertPolarity));
  
          DAQmxErrChk (DAQmxCfgDigEdgeStartTrig(taskHandle,"/Dev1/PFI14",DAQmx_Val_Rising));
  DAQmxErrChk (DAQmxStartTask (taskHandle));
  printf ("without interruption of the poll. Press Ctrl + C to interrupt\n");
  
          While {} (1)
  
                  DAQmxErrChk (DAQmxReadCounterScalarU32(taskHandle,10.0,&data,));
  
                  printf ("\rCount: %u", data);
  
                  fflush (stdout);
  
         	}
  
  Error:
  
          puts("");
  
          If (DAQmxFailed (error))
  
                  DAQmxGetExtendedErrorInfo (errBuff, 2048);
  
          If (taskHandle! = 0) {}
  
                  /*********************************************/
  
                  Stop DAQmx code
  
                  /*********************************************/
  
                  DAQmxStopTask (taskHandle);
  
                  DAQmxClearTask (taskHandle);
  
          }
  
          If (DAQmxFailed (error))
  
                  printf ("error DAQmx: %s\n",errBuff); ")
  
          printf ("end of the program, press the Enter key to quit\n");
  
          GetChar ();
  
          return 0;
  
  }
  
  

  Hi neurostu,

  Arms start triggers are disabled by default, so they do not have a default PFI line.

  You will need to set some properties DAQmx to configure a trigger for start of arms. Try adding between DAQmxCreateCICountEdgesChan() and DAQmxStartTask():

  DAQmxSetArmStartTrigType (taskHandle, DAQmx_Val_DigEdge);

  DAQmxSetDigEdgeArmStartTrigSrc (taskHandle, "/ Dev1/PFI14" ');

  DAQmxSetDigEdgeArmStartTrigEdge (taskHandle, DAQmx_Val_Rising);

  You have the file "help NOR-DAQmx C reference"? It should contain descriptions of the trigger > more > arm Start properties.

  Brad

• Can I synchronize the activity of health between two watches from Apple?

  I have two Apple - one for work, one for out watches. If I change watches in the middle of the day, the follow-up of the first watch of activity is not synchronized with the second watch. Is it possible to enable this so that the follow-up activity is specific for the whole day?

  Thank you!

  N ° it is not possible to synchronize the activity of health between two watches from Apple.

• How to synchronize the module also?

  I tried the Sync option but there is no possibility to synchronize the module?

  is this possible?

  No, but waves plans have been mentioned to include extensions in sync - "someday".

  AMO is a feature called "collections", which can be configured to allow you to install the same extensions on several PCs as a bit of a group.
  
  https://addons.Mozilla.org/en-us/Firefox/collections/

• synchronize the outputs digital AND digital NI USB 6343 entry

  Hello

  I use NI USB 6343 to fly 1 TTL devices. This device can also produce a TTL signal to indicate if the door is opened/closed.

  I use digital Bool 1 line 1 Point. I was able to reverse the opening/closing of the door on time. But I would like to synchronize the DI and DO it right.

  I tried to throw in the clock aboard, but he failed.

  Is it possible to synchronize the DI and DOI onbaord/hardware clock?

  Any idea will be great!

  Thank you!!

  Hello

  Synchronization of your tasks of DI and shouldn't be possible with your device. You'll need them timeless has a clock that is usable by both. This information is available in the X series user manual

  http://www.NI.com/PDF/manuals/370784f.PDF
  PG 6-9 and 6-13

  You can also find information and examples of synchronization of the various tasks in the article below.
  http://www.NI.com/product-documentation/4322/en/

  Good luck

  Eric

• Synchronize the ctr1 at ctr0 (generate outputs freq) via the signal of export

  I need help to configure the output channels of meter on my card pxi-6723. Here's what I'm trying to do:

  -have the possibility to synchronize the ctr1 exit toward ctr0. Note: ctr1 must begin on edge increase or decrease output ctr0.

  -be able to change idle, freq. etc for each of these outputs

  A sample that I worked on is attached. It works except the ctr1 output is trolling by cycles of 1 to 1.5 (according to a State of rest, edge selections). This delay is due to me having to put the slave (ctr1) task run after the masters. Note: The reason for this was the task of enforcement of crt0 (master) was the origin of the false triggers when exporting the trigger signal.

  Its there a way of software trigger ctr0 OR delay its release until both (ctr0 & ctr1) 'perform tasks"have been launched?

  Hi groz,.

  I have not tried, but I expect the following sequence to prevent false triggers:

  DAQmx control Task (ctr0 task, Commit)

  DAQmx Start (task ctr1)

  DAQmx Start (ctr0 task)

  Principal ctr0 has it on its state of rest.

  Also, I think you can do this trip without using a PXI_Trig line. To Start.DigEdge.Src the ctr1 task, specify "Ctr0InternalOutput". (To make the Terminal Ctr0InternalOutput appear in a Terminal of DAQmx e/s constant, right click on the constant, select "I/o name of filtering...) ("and put a check mark next to"Include the advanced terminals").

  Brad

• How to synchronize the device with an analog input device?

  Is it possible to synchronize a device (e.g. Basler scA640-70fm, IEEE 1394 b or NI 1722 smart camera) with an input device analog (for example, NI PCI/USB-6225 or NI PCI/USB-6255)?   For example, it is important to a video image of match with a sample of data digitized by the A/D converter.   In particular, it is important to know when the first video image starts compared to samples of digital data.   If it is possible to synchronize the camera with the A/D device, then then how is it?

  Thank you

  Ian

  Hello Robert,.

  Thank you for reference and information.

  Ian

• How can I synchronize the calendar on black berries with that on the surface?

  Original title: Surface Sync with Blackberry

  How the calendar on my Blackberry to sync with that on my Surface?

  Hello

  Thanks for posting your query in the Microsoft Community.

  It is not possible to synchronize the calendar of black Berry to that on the surface.
  Let us know if you have other questions about Windows in the future. We will be happy to help you. We at Microsoft, strive for excellence and provide our customers with the best support.

  Thank you.