Check status - VSAN inaccessible objects

Similar Questions

• HP Battery Check status: unknown (90)

  HP dv4-2165dx running Windows 7 64 bit with Support Assistant 5.2.9.2 and battery check 4.0.16.0

  Battery status says 'unknown', with the 100% battery charge.  Battery seems to work very well, but not checking the battery does not seem to be able to connect to it.

  When you run the battery check, it returns

  Status: Unknown (90)

  The long description is:

  Main battery

  An error occurred trying to access the battery.  Please re-insert the battery and the power adapter for a new test of the battery.

  The suggestion is to turn it off, replace the battery and AC power, I did several times.  I also followed the procedures outlined in another post about a battery check status unknown (94)... but no change.

  How can I correct this condition such that I can get a battery status check valid, like 'OK', 'Calibrate', 'Replace', etc.

  Is there a * easy * way to clean the battery contacts?

  Note: Diagnostics of HP you can run before Windows (tube exhaust when starting) indicate that the battery is "defective", perhaps because the diagnosis can also access chip smart battery.

  There is no other assignments by mentioning the battery... check (90) advanced status code just to code (94) elsewhere.

  Thanks for your help.

  db808

  Found the solution!

  There is a new version of firmware, version F.0F (appears as 'F' to the poster information) which is available in the download section software.  Version F.0F is documented as the resolution of a problem with checking Service Advisor 5.x and battery.

  I downloaded the firmware update, installed and then re-directed to battery check.  Now I have a proper status, with detailed battery status is displayed.  In my case, the battery is about 2 years old and needs to be calibrated.  But I now have a status legitimate and can go through the calibration process.

  Note: I use Advisior of Service 5.2.9.2 and says there is no update additional software that apply... .but Advisior Service missing update of Firmware and will not download and install it.

  According to the notice of Release Firmware, this firmware version applies to several laptop models.

  After I calibrate my battery, I'll try running battery check and start diagnostics.  Diagnostics boot time also scored as battery being defective in the past... with the older firmware.

  I'll post my results once completed.

  Hope this helps someone.

  db808

• VSAN - Inaccessible VM / orphans?

  Hi - I have a VSAN to 3 knots - version 6.0 - cluster 3073146.

  All of a sudden I came to all guests of the cluster as inaccessible and orphaned.  There has not been change in this lab environment / I know.

  Things I've tried so far:

  With RVC and nothing else in various orders

  Nothing appears in the data store browser

  restart of the armed forces has no effect

  esxi eagents restarting has no effect - reboot takes care of this, but I did any means until it recharges

  Save and reload without effect all the vm

  VSAN.clear_disks_cache - nothing

  VSAN.check_state - this displays all objects and how they are inaccessible etc. - does not solve the

  VSAN.purge_inaccessible_vswp_objects

  I also changed the multicast on all 3 of the nodes, just for craps - nothing.  I did this under Cormacs site - VSAN troubleshooting Case Study - CormacHogan.com

  What I'm missing here?

  Need help/help please!

  Thank you

  Check out the KB referenced in the message. I think it's a question or turning off the feature and the disc Assembly of groups that have been dismantled, if my memory is (assuming that is the question, of course).

  You may also obtain assistance from GSS via a request for service if you need other advice.

• Status: waiting for object data?

  Hello world
  
  I have a strange problem. I had a condition where the user could choose from a list of areas AD and on user approval gets created in the area, he asked.
  to do this, I created process form with a search field and mapped with the same field as an object.
  
  When the resource is requested is that it throws up to form, the user selects the field, and the resource is implemented when approved.
  But the problem I see is:
  
  The same resource when asked by the head of its ordered under (on the left menu, link resources and selecting grant resources), it does not show the shape of the object and gives me a final confirmation page. When I opened and see the status of the task, it shows me in the meantime the State against "the subject pending data.
  
  Can someone tell me why it does not show the object form when Manager resource to intercept request under! . Where I can start this problem in case of problems.
  
  littile more info here:
  
  the RO:
  Auto save checked
  Auto application verified.
  Auto checked prepopuleate
  
  on the definition of the process:
  Automatic backup form checked.
  
  
  
  Thank you
  Phil

  The console design
  Forms Designer-> your item form-> permissions tab of object in the form of the object-> Assign

  The same for the purpose of resource
  Objects in resource-your purpose of resource-> directors >-> Assign

• BlackBerry Smartphones Software not checking status of applications

  Hi, first time poster and new owner of a 8120. I have problems with the software. At first, I selected the option that allows the connection of e-mails from work and had to remove the software and start again.

  The second time, the software loaded perfectly. However, there is a stumbling block. The only time "check state" part of the process of loading does not work. I get the following message, the system seems as if it works... check something... and then stalls.

  "Checking the status of the applications on the device. It is required only on the first connecting the device to a new installation of office. »

  I let him think for all last night, assuming that this process could take some time. 7 hours later, he still has no progesssed.

  Someone at - it ideas, beyond the removal of the software and try again? No matter how appreciated heal.

  OK got the answer... I think so. In fact, I read a response to a similar request here. Essentially - I kept the phone connected via the USB cable and everything plugged I removed the battery. In the State was checked sur.5 of a second. So weird!

  I reconnected it the battery, stop the software of blackberry desktop, reloaded again, then alacazam! It worked.

• Problem with the installation of the Plugin to check the VSANS health

  Hello!

  After running - /usr/lib/vmware-vpx/vsan-health/health-rpm-post-install.sh

  I get this result:

  /usr/lib/VMware-VPX/VSAN-health/health-RPM-post-install.sh--force

  / usr/lib/VMware-vpx/Workflow/bin

  2015 05-15 T 21: 32:05.625Z development for install parameter: workflow.int.ser vice port

  2015 05-15 T 21: 32:05.633Z development for install parameter: workflow.int.jmx - port

  2015 05-15 T 21: 32:05.643Z development for install parameter: vpxd.int.sdk - por t

  2015 05-15 T 21: 32:05.650Z development for install parameter: vpxd.int.sdk tun nel-port

  2015 05-15 T 21: 32:05.658Z development for install parameter: rhttpproxy.ext.p ort1

  2015 05-15 T 21: 32:05.665Z development for install parameter: rhttpproxy.ext.p ort2

  {'vpxd_sdk_tunnel_port': ' 8089', 'rhttpproxy_https_port': '443', 'rhttpproxy_htt p_port': ' 80', 'workflow_service_port': ' 8088', 'vpxd_sdk_port': '8085', 'PASSWO RD': ", 'workflow_jmx_port': '19999'}

  2015 05-15 T 21: 32:05.673Z development for install parameter: syslog.ext.port

  2015 05-15 T 21: 32:05.682Z development for install parameter: vc.home.path

  2015 05-15 T 21: 32:05.690Z development for install parameter: vc.conf.path

  2015 05-15 T 21: 32:05.691Z health service firstboot VSAN has started

  2015 05-15 T 21: 32:05.702Z user %s already exists, creation to jump.

  2015 05-15 T 21: 32:05.710Z development for install parameter: rhttpproxy.cert

  2015 05-15 T 21: 32:05.710Z WARNING rhttpproxy.cert install parameters optimization I empty s

  Traceback (most recent call changed):

  File "/ usr/lib/vmware-vpx/firstboot/vsanhealth_firstboot.py", line 292, may n

  RES = vsanhealth_fb.get_rp_cert_info)

  File "/ usr/lib/vmware/site-packages/cis/firstboot.py", line 185, in get_rp_cer t_info

  digital footprint, ssl_trust, TCR = get_certinfo (rp_cert_file)

  File "/ usr/lib/vmware/site-packages/cis/tools.py", line 184, in get_certinfo

  f.readFile (cert_file)

  File "/ usr/lib/vmware/site-packages/cis/utils.py", line 1028 to readFile

  loErrMsg = localizedString (errMsg, file_name, e)

  TypeError: localizedString() takes at most 2 arguments (3 given)

  2015 05-15 T 21: 32:05.712Z health firstboot VSAN has failed

  Traceback (most recent call changed):

  File "/ usr/lib/vmware-vpx/firstboot/vsanhealth_firstboot.py", line 343, < mo dule >

  Main()

  File "/ usr/lib/vmware-vpx/firstboot/vsanhealth_firstboot.py", line 333, in may n

  If eInfo and eInfo.detail:

  UnboundLocalError: variable local "eInfo" referenced before assignment

  VMware-vpxd: your visit vpxd request administrative. process ID was 9301

  success

  VMware-vpxd: Certificate SSL VC does not exist, it will be generated by vpxd

  Pending database shipped to startup: success

  Running scripts before starting...

  VMware-vpxd: from vpxd of administrative request.

  success

  VMware-vpxd: waiting for vpxd to start listening to the requests on 8089

  Wait vpxd initialize: .the

  VMware-vpxd: vpxd has been initialized.

  Last login: Friday, May 15, 21:18:53 UTC 2015 on console

  Stopping VMware vSphere Web Client...

  Order of VMware vSphere Web Client.

  Last login: Friday, May 15, 21:32:20 UTC 2015 on pts/1

  From VMware vSphere Web Client...

  Waiting for VMware vSphere Web Client...

  running: PID:30348

  

  The suite - no buttons.

  As far as I understand it - there are a few problems with certificate.

  So, help me with troubleshooting, please.

  Thank you.

  Glad it worked! I managed to solve the rest of my problem get the plugin loaded as well.  Layout rhttpproxy.cert solved the problem with health-tr/min-post-install completed successfully.  But after you start the vmware-vsan-health service, health in the web client page loaded yet never buttons such as 'enable '.

  I checked /var/log/vmware/vsan-health/vmware-vsan-health-service.log and noticed it was spamming 'Could not open a session in VC, retry in 10 seconds' over and over again.  So I went digging in the python source in /usr/lib/vmware-vpx/vsan-health. I managed to understand that when you start the web service that hosts the plugin, it tries to connect to vCenter using own vCenter SSL certificate and the private key (rui.crt and rui.key) in/etc/vmware-vpx/ssl. On my VCSA, the permissions of that file looked like this:

  myvcsa: / etc/vmware-vpx/ssl # ls - la

  Total 28

  drwxr-x - 2 root cis 4096 Jul 20 05:00.

  drwxr-xr-x 14 root root 4096 21 Jul 04:05...

  -rw - 1 root root 3416 Apr 30 05:36 rui.crt

  -rw - 1 root root 1704 Apr 30 05:36 rui.key

  -rw - 1 root root 65 30 Apr 05:19 symkey.dat

  -rw - 1 root root 3343 Apr 30 05:36 vcsoluser.crt

  -rw - 1 root root 1704 Apr 30 05:36 vcsoluser.key

  Now, I knew that the health service was run as a local user called vsan-health. It so there's no way that he would be able to read these files.  Fortunately, I had a mostly vanilla VCSA I could compare with.  Here's what looked like the VCSA vanilla folder:

  myvcsa: / etc/vmware-vpx/ssl # ls - la

  Total 28

  drwxr-x - 2 root cis 4096 Jul 20 05:00.

  drwxr-xr-x 14 root root 4096 Jul 21 04:24...

  -rw - r - 1 root cis 3416 Apr 30 05:36 rui.crt

  -rw - r - 1 root cis 1704 Apr 30 05:36 rui.key

  -rw - 1 root root 65 30 Apr 05:19 symkey.dat

  -rw - r - 1 root cis 3343 Apr 30 05:36 vcsoluser.crt

  -rw - r - 1 root cis 1704 Apr 30 05:36 vcsoluser.key

  Notice the difference of the Group property on the associated files cert and change of 600 to 640 permissions.  When I saw that, I have also remembered seeing in the vsan firstboot script that the vsan-health user was added to the cis group.  As soon as I did my broken VCSA permissions corresponds to vanilla, the service has started and all this work began.  I guess the reason that my permissions were leech is a bug with the replacement of SSL scripts.  One of the first things I do on my vCenter is updating the SSL certificates with those customized PKI infrastructure.  I guess that process currently does not work quite right and live the permissions on files that is not replaced.

• How can I check status of SRO?

  I've seen several posts on this URL we receive in our email https://web.palm.com/sro/status.jhtml and he we dumping just to the main page of palm. Someone at - it a way of work to check on our SRO?

  Hello..  Welcome to the forums of Palm.  Try this link, https://support.palm.com/eservice_enu/start.swe?SWECmd=GotoView&SWEView=PALM+Check+SRO+Load , you may need to copy into your browser to access it.  If you go to the support page of Palm trees, in this case, select phones, centro, sprint, support services.  Then scroll down to repair and services when you open at the bottom, you will see the link to the State of repair of palm.  I just tested and it works.

• Is it possible to change the status of an object?

  Hello!

  I'm currently learning AS3 to develop my own game, but is my experience in game development with LUA script. Lua script, you can write/script objects with different status, with IF statements.  For an example,

  Code:

  if(ObjGet(ObjFind(1001),O_STATUS)==1)     
      {
       This will happen
      }
     else
     if(ObjGet(ObjFind(1001),O_STATUS)==2) 
     {
       This will happen
      }

  In other words if object 1001 (for example, a key) put the criteria of status 1 = this will happen or if he put 2 status = another triggered event. I was wondering if it is possible to do with the AS3 code?

  Let me explain what I want to achieve, I want an event when you kill enemies of script, it turns block that the player challenges. I thought to do through frameworks of the enemy object - 1 enemy = frame, 2 = block.

  Code:

  if (player.hitTestObject(enemy))
                 {
              health.meter.width--; ///reduce health of enemy
                          }
                       Collision.block(player, enemy); ///enemy bounces off player 
                           }
                 if (enemy!= null)
                 {
                      if (enemy.hitTestPoint(bullet.x, bullet.y,true))
                           {
                           enemy.meter.width -= 5;
                           enemy.gotoAndStop(2); //// frame 2 - block
                           removeChild(bullet);
                            {
                                if(enemy.gottoAndStop(2)) /// if frame 2 enemy
                            }
                      Collision.block(enemy, player); /// player can push f2 enemy 
                            }

  I tried this code, it does not work and also haven't tried the code of State above my experience both Lua, no chance. Any suggestions? Any help would be greatly appreciated.

  P.S - Question at random - how to make books/sites that share script files to look at to make reference to and learn?

  Your lack of proper indentation promotes a difficult read, but you can reduce that to...

  If (player.hitTestObject (enemy)) {}
  If (player.currentFrame == 1 | player.currentFrame == 3) {}
  -Health.meter.Width;
  player.nextFrame ();
  }
  Collision.Block (player, enemy);
  } Else if (player.currentFrame == 2 | player.currentFrame == 4) {}
  player.prevFrame ();
  }

• To check if a virtual object is VM or template

  I need to check for a list of the VMs\Templates, which are the models. Is there a way to do it-powercli way?

  An alternative

  $names = get-Content noms.txt

  $namesRegEx = $names - join ' |'

  Notice-EEG - ViewType VirtualMachine-filter @{"Name" = $namesRegEx} |

  Select Name,@{N="Template; E={$_. Config.Template}}

• How to check what are the objects using this public synonym?

  Hi Experts
  
  Currently, I have a public synonym, WORK that is created for WORK table in the schema of the BRAND: "synonym PUBLIC EMPLOYMENT BRAND. JOB. "
  SELECT THIS OPTION. WORK is granted to the TOM_UPDATE (a role): GRANT SELECT ON MARK. JOBS AT TOM_UPDATE;
  
  I am using TOAD 9.6.1.1 and I wanted to drop the public synonym but I am not able to see that another object in the database uses this public synonym, JOB.
  
  Help, please.

  moslee wrote:
  Hi Experts

  Currently, I have a public synonym, WORK that is created for WORK table in the schema of the BRAND: "synonym PUBLIC EMPLOYMENT BRAND. JOB. "
  SELECT THIS OPTION. WORK is granted to the TOM_UPDATE (a role): GRANT SELECT ON MARK. JOBS AT TOM_UPDATE;

  I am using TOAD 9.6.1.1 and I wanted to drop the public synonym but
  I am not able to see that another object in the database uses this public synonym, JOB.

  The objects are not "use the synonym".
  The code use synonym to access object.

  use grep allows you to browse the source code that resides in your repository

• Status of the objects for a specific day

  Hi all
  
  I want to know is there any changes (especially the DDL) in any object for a given day?
  
  
  
  Can anyone suggest?
  
  
  Thanx

  1. why you don't want to use triggers?
  2. you can use Oracle Audit

  - - - - - - - - - - - - - - - - - - - - -
  Kamran Agayev a. (10g OCP)
  http://kamranagayev.WordPress.com

• How do I check the status of the player

  What is the method of checking the status of Player object (as REALIZED, PREFETCHED, etc.) in BB programmatically?

  Player.getState)

• How to check the JSON object properties available

  Hi I have a JSON of WebService object.

  How to check the available JSON object?

  ex JSON:

  {

  name: "someName".

  DESC: 'someDesc '.

  }

  How to check the available name?

  Because sometimes not available from the server name properties

  void MyClass::httpFinished(QNetworkReply* reply)
  {
  QString data = (QString) reply->readAll();
  bb::data::JsonDataAccess jda;
  QVariant variant = jda.loadFromBuffer(data);
  QVariantMap variantMap = variant.value();
  QString name = variantMap.value("name").toString();
  }
  

  I want to hide component Label on my .qml if name not available from webservice.

  Thank you

  Kaz32 wrote:

  Hi I have a JSON of WebService object.

  How to check the available JSON object?

  ex JSON:

  {

  name: "someName".

  DESC: 'someDesc '.

  }

  How to check the available name?

  Thank you

  If you want to check if the name is available, you must use

  bool nameExists = variantMap.contains ("name")

• Task to the mapping of object status: is it possible to have user-defined status?

  Hi guru.

  'Task of object state Mapping' tab for the definition of the process allows you to set the "status of the object' to 'status '.

  'Status of the object' contains values defined on "Definition of the State" for defined object "resource". It is possible to extend this list by adding user-defined status. But the allocation of these statutes (for example, 'view data name updated') for status (say, 'C', finished) it causes a corresponding Bundle error is found.

  How is it possible to use the user defined the statutes?

  Hello

  These statutes are pre-defined and shipped by the IOM.

  You cannot change C-> etc. put into service.

  ~ J

• Need help to understand the DOM objects on host VSAN MDs

  I read the info that I could find on the disk objects (including best practices guide & blog of Cormac), but fail to wrap my head around why I see what I see.

  I have a motorized on VM (cvf1-wshark), who lives on a VSAN 3 nodes cluster. Each node has 1 SSD and 4 MD I uses all of the default policies (FTT, bandwidth, etc.).

  That said, I wonder why it is clear from the exit of the vsan.disk_object_info of order RVC who live on 3 of my knots VSAN VM objects. vSphere client shows the correct RAID0 between 2 hosts (13.21 & 13.23) mirroring a witness (13.22), but the DOM objects on 13.22 aren't cookies (which I don't expect to see objects anyway). So, what do these objects on 13.22? I see the same distribution for each of my virtual machines on this cluster.

  Thank you

  Steve

  

  

  ################

  13.21

  ################

  / localhost/VSAN-DC/Computers/VSAN cluster > vsan.disk_object_info. NAA.600605b006f7fb701ab6548453137d63

  2014-04-15 14:44:07 + 0000: VSAN recovery disk info from 192.168.13.21 (may take a moment)...

  2014-04-15 14:44:07 + 0000: VSAN recovery disk info from 192.168.13.23 (may take a moment)...

  2014-04-15 14:44:07 + 0000: VSAN recovery disk info from 192.168.13.22 (may take a moment)...

  2014-04-15 14:44:08 + 0000: does get disc info VSAN

  NAA.600605b006f7fb701ab6548453137d63 (52098356-69da-4ab9-b03f-11eea6025370) physical disk:

  The DOM object: 26533353-5452-fa2f-b0f6-0025b5c2622c (owner: 192.168.13.23, policy: hostFailuresToTolerate = 1).

  Context: Part of VM cvf1-wshark: directory of Namespace

  Witness: 27533353-c48b-63b3-90bb-0025b5c2622c (State: ACTIVE (5), the host: 192.168.13.22, md: naa.600605b006f7dae01ab65f7317f942d1, ssd: naa.600605b006f7dae01abde7e20e633fb2)

  RAID_1

  Component: 27533353-ba62-62b3-d5c4-0025b5c2622c (State: ACTIVE (5), the host: 192.168.13.21, md: * naa.600605b006f7fb701ab6548453137d63* *, ssd: naa.600605b006f7fb701abde07e0de6c455)

  Component: 27533353-eeb5-60b3-7ddc-0025b5c2622c (State: ACTIVE (5), the host: 192.168.13.23, md: naa.600605b006f7f9701ab604452752b6b4, ssd: naa.600605b006f7f9701abe00d3102940d7)

  The DOM object: 29533353-76d4-69d0-5601-0025b5c2622c (owner: 192.168.13.23, policy: hostFailuresToTolerate = 1).

  Context: Part of VM cvf1-wshark: disc: [vsanDatastore] 26533353-5452-fa2f-b0f6-0025b5c2622c/cvf1-wshark.vmdk

  Witness: 29533353-0247-fce9-c547-0025b5c2622c (State: ACTIVE (5), the host: 192.168.13.22, md: naa.600605b006f7dae01ab65f7317f942d1, ssd: naa.600605b006f7dae01abde7e20e633fb2)

  RAID_1

  Component: 29533353-829d-fbe9-22fc-0025b5c2622c (State: ACTIVE (5), the host: 192.168.13.21, md: * naa.600605b006f7fb701ab6548453137d63* *, ssd: naa.600605b006f7fb701abde07e0de6c455)

  Component: 29533353-eebd-fae9-7ec5-0025b5c2622c (State: ACTIVE (5), the host: 192.168.13.23, md: naa.600605b006f7f9701ab604452752b6b4, ssd: naa.600605b006f7f9701abe00d3102940d7)

  ################

  13.22

  ################

  / localhost/VSAN-DC/Computers/VSAN cluster > vsan.disk_object_info. NAA.600605b006f7dae01ab65f7317f942d1

  NAA.600605b006f7dae01ab65f7317f942d1 (5226984a-510a-dab6-86c0-1950f37a4ee2) physical disk:

  The DOM object: 26533353-5452-fa2f-b0f6-0025b5c2622c (owner: 192.168.13.23, policy: hostFailuresToTolerate = 1).

  Context: Part of VM cvf1-wshark: directory of Namespace

  Witness: 27533353-c48b-63b3-90bb-0025b5c2622c (State: ACTIVE (5), the host: 192.168.13.22, md: * naa.600605b006f7dae01ab65f7317f942d1* *, ssd: naa.600605b006f7dae01abde7e20e633fb2)

  RAID_1

  Component: 27533353-ba62-62b3-d5c4-0025b5c2622c (State: ACTIVE (5), the host: 192.168.13.21, md: naa.600605b006f7fb701ab6548453137d63, ssd: naa.600605b006f7fb701abde07e0de6c455)

  Component: 27533353-eeb5-60b3-7ddc-0025b5c2622c (State: ACTIVE (5), the host: 192.168.13.23, md: naa.600605b006f7f9701ab604452752b6b4, ssd: naa.600605b006f7f9701abe00d3102940d7)

  The DOM object: 29533353-76d4-69d0-5601-0025b5c2622c (owner: 192.168.13.23, policy: hostFailuresToTolerate = 1).

  Context: Part of VM cvf1-wshark: disc: [vsanDatastore] 26533353-5452-fa2f-b0f6-0025b5c2622c/cvf1-wshark.vmdk

  Witness: 29533353-0247-fce9-c547-0025b5c2622c (State: ACTIVE (5), the host: 192.168.13.22, md: * naa.600605b006f7dae01ab65f7317f942d1* *, ssd: naa.600605b006f7dae01abde7e20e633fb2)

  RAID_1

  Component: 29533353-829d-fbe9-22fc-0025b5c2622c (State: ACTIVE (5), the host: 192.168.13.21, md: naa.600605b006f7fb701ab6548453137d63, ssd: naa.600605b006f7fb701abde07e0de6c455)

  Component: 29533353-eebd-fae9-7ec5-0025b5c2622c (State: ACTIVE (5), the host: 192.168.13.23, md: naa.600605b006f7f9701ab604452752b6b4, ssd: naa.600605b006f7f9701abe00d3102940d7)

  ################

  13.23

  ################

  / localhost/VSAN-DC/Computers/VSAN cluster > vsan.disk_object_info. NAA.600605b006f7f9701ab604452752b6b4

  NAA.600605b006f7f9701ab604452752b6b4 (52cd5b55-c160-3fd8-2285-cfadc7b5d11e) physical disk:

  The DOM object: 26533353-5452-fa2f-b0f6-0025b5c2622c (owner: 192.168.13.23, policy: hostFailuresToTolerate = 1).

  Context: Part of VM cvf1-wshark: directory of Namespace

  Witness: 27533353-c48b-63b3-90bb-0025b5c2622c (State: ACTIVE (5), the host: 192.168.13.22, md: naa.600605b006f7dae01ab65f7317f942d1, ssd: naa.600605b006f7dae01abde7e20e633fb2)

  RAID_1

  Component: 27533353-ba62-62b3-d5c4-0025b5c2622c (State: ACTIVE (5), the host: 192.168.13.21, md: naa.600605b006f7fb701ab6548453137d63, ssd: naa.600605b006f7fb701abde07e0de6c455)

  Component: 27533353-eeb5-60b3-7ddc-0025b5c2622c (State: ACTIVE (5), the host: 192.168.13.23, md: * naa.600605b006f7f9701ab604452752b6b4* *, ssd: naa.600605b006f7f9701abe00d3102940d7)

  The DOM object: 29533353-76d4-69d0-5601-0025b5c2622c (owner: 192.168.13.23, policy: hostFailuresToTolerate = 1).

  Context: Part of VM cvf1-wshark: disc: [vsanDatastore] 26533353-5452-fa2f-b0f6-0025b5c2622c/cvf1-wshark.vmdk

  Witness: 29533353-0247-fce9-c547-0025b5c2622c (State: ACTIVE (5), the host: 192.168.13.22, md: naa.600605b006f7dae01ab65f7317f942d1, ssd: naa.600605b006f7dae01abde7e20e633fb2)

  RAID_1

  Component: 29533353-829d-fbe9-22fc-0025b5c2622c (State: ACTIVE (5), the host: 192.168.13.21, md: naa.600605b006f7fb701ab6548453137d63, ssd: naa.600605b006f7fb701abde07e0de6c455)

  Component: 29533353-eebd-fae9-7ec5-0025b5c2622c (State: ACTIVE (5), the host: 192.168.13.23, md: * naa.600605b006f7f9701ab604452752b6b4* *, ssd: naa.600605b006f7f9701abe00d3102940d7)

  Yep - it is a quite normal output.

  As Duncan suggests above, your poster only the same information each time your run of the command.

  And each object is composed of 3 elements (2 x replicas of RAID-1 + the witness).

  The other thing to watch is that this command is more information that you have requested, i.e. all components. However, components that are active for the disc that you put as an argument to the command are going to be wrapped in * double Asterix *.

  For example:

  The DOM object: 26533353-5452-fa2f-b0f6-0025b5c2622c (owner: 192.168.13.23, policy: hostFailuresToTolerate = 1).

  Context: Part of VM cvf1-wshark: directory of Namespace

  Witness: 27533353-c48b-63b3-90bb-0025b5c2622c (State: ACTIVE (5), the host: 192.168.13.22, md: * naa.600605b006f7dae01ab65f7317f942d1* *, ssd: naa.600605b006f7dae01abde7e20e633fb2)

  HTH

  Cormac