Check the before cluvfy installation fails on nodes
I'll put up a RAC cluster in Oracle 11.2.0.3 on both nodes to Windows 2008R2.
I have completed all pre-installation tasks (I hope) and I'd like to check this by running:
cluvfy comp sys database Pei n all
using the standalone download of cluvfy - I have not installed all the Oracle software yet.
This completes successfully on the remote node but fails on the local node (one that I run in).
There are a lot of output, but these seem to be the main problems:
[1852@PRDAT217] [Worker 3] [01-10-2013 14:44:45.190 CEST] [WindowsSystem.deleteService:876] _WS_ deleteService2: PRDAT217 Service OracleRemExecService result node: 0 | Access is denied.
[1852@PRDAT217] [Worker 3] [01-10-2013 14:44:45.190 CEST] [NativeResult. < init >: 91] NativeResult: The resulting string is0 | Access is denied.
[1852@PRDAT217] [Worker 3] [01-10-2013 14:44:45.190 CEST] [NativeResult. < init >: 99] The State channel is: 0
[1852@PRDAT217] [Worker 3] [01-10-2013 14:44:45.190 CEST] [NativeResult. < init >: 112] The resulting string is: access is denied. 1
[1852@PRDAT217] [Worker 3] [01-10-2013 14:44:45.190 CEST] [WindowsSystem.startRemoteExecServer:2156] _WS_ cannot remove the Service OracleRemExecService on PRDAT217
[1852@PRDAT217] [Worker 3] [01-10-2013 14:44:45.206 CEST] [RemoteExecCommand.setupRemoteExecService:748] Start remoteExecServer failed with Execptionoracle.ops.mgmt.nativesystem.NativeException: PRKN-1016: unable to create service 'OracleRemExecService' on 'PRDAT217' node, error: 'Access denied.'.
[1852@PRDAT217] [Worker 3] [01-10-2013 14:44:45.206 CEST] [RemoteExecCommand.execute:421] NativeException occurred during the implementation of RemoteExecService. Msg:PRKN - 1016 ERR: unable to create service 'OracleRemExecService' on 'PRDAT217' node, error: "access is denied.
However, there is a folder in the oraremservice of appeal for temporary destination and there are files DLL and the RemoteExecService.exe in there.
There are a number of log files in the temp directory, for example called sprvmcli_9885533.log (the number is generated only every time).
When running against the local node, these contain the following:
01/10/13 14:44:42 trying to open a named pipe
01/10/13 14:44:42 about to open the pipe
01/10/13 14:44:42 call create file
01/10/13 14:44:42 error opening of the pipe 5
01/10/13 14:44:42 sprvcli: retval = 7
When the cluvfy runs successfully against the remote node, this has a lot more information in, and the errors do not occur.
I use the utility cluvfy incorrectly for this stage of the operation, or is there something wrong with my setup?
Are you sure as an administrator? Or your rights correct username?
Tags: Database
Similar Questions
-
The Service Pack installation failed with the 0x8e5e03fe error code.
Hi all
I'm not able to install Windows Server 2008 R2 SP1, when I install SP1, its going very well up to 90%, after that its giving the below error.
' 1. the Service Pack installation failed with the error 0x8e5e03fe. ".
2 "changes in an update (Service Pack for Microsoft Windows (KB976932)) failed during the installation of the Service Pack.
Identity: Package_for_KB976932 ~ 31bf3856ad364e35 ~ amd64 ~ ~ 6.1.1.17514
Error code: 0x8e5e03fe
State: 7 "
I took the following steps to resolve. but it's not helping me.
1. I CA anti-virus, I disabled the Agent Client of CA.
"2. I installed Windows analysis tool, but I did ' t get any error, under the errorlog for your reference."
=================================
Preparation of control system was updated.
Binary version 6.1.7601.21645
Package Version 11.0
2011-04-16 15:49Checking Windows Service Packages
Checking of manifests package and catalogs
Checking package Watchlist
Watchlist checking
Checking packages
Control components store
Summary:
Seconds executed: 753
No error found.3. I ran this commond ""dism / online/Remove-Package /packagename:Package_for_KB976932~31bf3856ad364e35~amd64~~6.1.1.17514 " "
Please help me
Concerning
Ganga
Hi Ganga,
Your question of Windows 7 is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the Windows Server Forums. Please post your question in the Windows Server forum.
http://social.technet.Microsoft.com/forums/en-us/category/WindowsServer/
-
Hi after windows 10 almost killed my laptop and I had to restore to factory settings I tried to re - install creative cloud and get the following message "WE ENCOUNTERED THE FOLLOWING PROBLEMS: INSTALLATION FAILED TO INITIALIZE program.» Please DOWNLOAD ADOBE SUPPORT ADVISOR TO DETECT THE PROBLEM. "then I tried to download the Advisor to support that to find it is no longer available. Accept payment until this problem is solved we know how to solve this problem?
first of all uninstall cc on your computer.
Run the vacuum cleaner by, http://www.adobe.com/support/contact/cscleanertool.html
Restart your computer and reinstall the cc, Download Adobe Creative Cloud apps desktop application | CC free trial Adobe
If that translates into the same initialization error:
start at the top and work your way down to apply applicable patches until your problem is solved.
If (win) cc: https://helpx.adobe.com/creative-cloud/kb/creative-cloud-desktop-application-failed.html
If your error is:
"Setup failed to initialize. File not found. ' or 'could not initialize installation. This could be due to missing files.
first of all, rename folder OOBE OOBE.old.
to find the OOBE:
Win 64 bit OS: Program Files x86\Common Files\Adobe\OOBE
Win 32 bit OS: Program Files \Common Files\Adobe\OOBE
Mac os: HD > library > application support of > adobe > caps
Mac os: USER > library > application support of > adobe > OOB
If it fails or isn't the exact error you see, uninstall, clean (http://www.adobe.com/support/contact/cscleanertool.html) and reinstall.
If you use an installation dvd:
Copy the contents of the drive in a desktop folder and install from this directory.
If you are using a mac:
1. try to create a new user account in Mac with administrator privileges.
2. connect to the new user, navigate to Mac HD > Application > utilities > Adobe Installer folder, locate products such as Adobe Reader, Adobe Flash, Adobe Air and uninstall the
3. navigate to the user library > Application Support > Adobe and Adobe put in the trash.
4. navigate to Mac HD > library > Application Support > Adobe and Adobe put in the trash.
5 restart the installation.
If everything is applicable above fails, check your Setup logs:
http://helpx.Adobe.com/Photoshop-elements/KB/troubleshoot-install-using-logs-elements.html
-
The step of INSTALLATION fails when you use IAM Deployment Wizard
Hello
I am making an enterprise deployment by using the IDMLCM tool by following the Enterprise for Oracle Identity and Access Management Deployment Guide (http://docs.oracle.com/cd/E40329_01/doc.1112/e48618/toc.htm).
I completed the PREVERIFY step on each node (iamhost1, iamhost2, webhost1, webhost2) successfully but did not step in the INSTALLATION when you run the following command on the first node (iamhost1):
runIAMDeployment.sh - $IDMLCM_HOME/provisioning/bin/provisioning.rsp - ignoreSysPrereqs true - target responsefile install
I can't understand the reason according to the runIAMDeployment - install.log.
Help, please.
Thank you and best regards.
Here is the log:
……………
[2014-08 - 07T 07: 30:06.545 + 08:00] [runIAMDeployment - install] [NOTIFICATION] [] [runIAMDeployment-install] [tid: 10] [ecid: 0000KUhe6KcD ^ a05zzK6yW1Jsfds000001, 0] start the installation process for Identity Management Suite...
[2014-08 - 07T 07: 30:06.594 + 08:00] [runIAMDeployment - install] [NOTIFICATION] [] [runIAMDeployment-install] [tid: 10] [ecid: 0000KUhe6KcD ^ a05zzK6yW1Jsfds000001, 0] [logStatus] STATE = BUILD_ERROR! TIMESTAMP = 2014-08-07 07:30:06 CST! TARGET = install! CATEGORY = BUILD_ERROR! DOMAIN = NONE! Host name = iamhost1! PRODUCTFAMILY = orchestration. PRODUCT = orchestration. TASK = canPhaseStartOnThisHost! TaskID = orchestration.orchestration.BUILD_ERROR. Install.canPhaseStartOnThisHost! MESSAGE = installation phase has failed on this host: iamhost1. To re - run this phase on this host, run first install cleanup and restoration-install. ! DETAIL = installation phase has failed on this host: iamhost1. To re - run this phase on this host, run first install cleanup and restoration-install. ! BUILDFILE=/U02/Oracle/middleware/Oracle_IDMLCM1/provisioning/IDM-provisioning-build/IDM-orchestration-build.XML! LINENUMBER = 97!
[2014-08 - 07T 07: 30:06.596 + 08:00] [runIAMDeployment - install] [ERROR] [FAPROV-00298] [runIAMDeployment - install] [tid: 10] [ecid: 0000KUhe6KcD ^ a05zzK6yW1Jsfds000001, 0] year Error occurred: []
The installation phase has failed on this host: iamhost1. To re - run this phase on this host, run first install cleanup and restoration-install.
at oracle.apps.fnd.provisioning.ant.taskdefs.CanPhaseStartOnThisHostTask.checkIfPhaseCanStartOnCurrentHost(CanPhaseStartOnThisHostTask.java:190)
at oracle.apps.fnd.provisioning.ant.taskdefs.CanPhaseStartOnThisHostTask.checkIfPhaseCanStart(CanPhaseStartOnThisHostTask.java:218)
at oracle.apps.fnd.provisioning.ant.taskdefs.CanPhaseStartOnThisHostTask.eval(CanPhaseStartOnThisHostTask.java:73)
at oracle.apps.fnd.provisioning.ant.taskdefs.CanPhaseStartOnThisHostTask.executeTask(CanPhaseStartOnThisHostTask.java:61)
at oracle.apps.fnd.provisioning.ant.taskdefs.BaseProvisioningTask.execute(BaseProvisioningTask.java:106)
at org.apache.tools.ant.UnknownElement.execute(UnknownElement.java:288)
at sun.reflect.GeneratedMethodAccessor1.invoke (unknown Source)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at org.apache.tools.ant.dispatch.DispatchUtils.execute(DispatchUtils.java:106)
at org.apache.tools.ant.Task.perform(Task.java:348)
at org.apache.tools.ant.taskdefs.Sequential.execute(Sequential.java:62)
at net.sf.antcontrib.logic.IfTask.execute(IfTask.java:217)
at sun.reflect.NativeMethodAccessorImpl.invoke0 (Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at org.apache.tools.ant.dispatch.DispatchUtils.execute(DispatchUtils.java:106)
at org.apache.tools.ant.TaskAdapter.execute(TaskAdapter.java:154)
at org.apache.tools.ant.UnknownElement.execute(UnknownElement.java:288)
at sun.reflect.GeneratedMethodAccessor1.invoke (unknown Source)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at org.apache.tools.ant.dispatch.DispatchUtils.execute(DispatchUtils.java:106)
at org.apache.tools.ant.Task.perform(Task.java:348)
at org.apache.tools.ant.Target.execute(Target.java:357)
at org.apache.tools.ant.Target.performTasks(Target.java:385)
at org.apache.tools.ant.Project.executeSortedTargets(Project.java:1337)
at org.apache.tools.ant.Project.executeTarget(Project.java:1307)
at org.apache.tools.ant.helper.DefaultExecutor.executeTargets(DefaultExecutor.java:41)
at org.apache.tools.ant.Project.executeTargets(Project.java:1191)
at org.apache.tools.ant.Main.runBuild(Main.java:758)
at org.apache.tools.ant.Main.startAnt(Main.java:218)
at org.apache.tools.ant.launch.Launcher.run(Launcher.java:257)
at org.apache.tools.ant.launch.Launcher.main(Launcher.java:104)
]]
[2014-08 - 07T 07: 30:06.663 + 08:00] [runIAMDeployment - install] [NOTIFICATION] [] [runIAMDeployment-install] [tid: 10] [ecid: 0000KUhe6KcD ^ a05zzK6yW1Jsfds000001, 0] [logStatus] STATE = BUILD_ERROR! TIMESTAMP = 2014-08-07 07:30:06 CST! TARGET = listener-journal-status-in-error! CATEGORY = install! DOMAIN = NONE! Host name = iamhost1! PRODUCTFAMILY = orchestration. PRODUCT = orchestration. TASK = install! TaskID = orchestration.orchestration.None.Listener - journal-status-in - error.NONE! MESSAGE = ERROR! DETAIL = installation phase has failed on this host: iamhost1. To re - run this phase on this host, run first install cleanup and restoration-install. ! BUILDFILE=/U02/Oracle/middleware/Oracle_IDMLCM1/provisioning/provisioning-build/listener-build.XML! LINENUMBER = 65!
[2014-08 - 07T 07: 30:06.664 + 08:00] [runIAMDeployment - install] [ERROR] [] [runIAMDeployment-install] [tid: 10] [ecid: 0000KUhe6KcD ^ a05zzK6yW1Jsfds000001, 0] the installation phase has failed on this host: iamhost1. To re - run this phase on this host, run first install cleanup and restoration-install.
[2014-08 - 07T 07: 30:06.670 + 08:00] [runIAMDeployment - install] [ERROR] [] [runIAMDeployment-install] [tid: 10] [ecid: 0000KUhe6KcD ^ a05zzK6yW1Jsfds000001, 0] BUILD FAILED []
/U02/Oracle/middleware/Oracle_IDMLCM1/provisioning/IDM-provisioning-build/IDM-orchestration-build.XML:97: the installation phase has failed on this host: iamhost1. To re - run this phase on this host, run first install cleanup and restoration-install.
………………
$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$$
I made some change and do it again and this time I got the error "installation OUD failed.". Any suggestion?
--------------------
[2014-08 - 07T 12: 44:52.652 + 08:00] [runIAMDeployment - install] [NOTIFICATION] [] [runIAMDeployment-install] [tid: 12] [ecid: 0000KUimAkgD ^ a05zzK6yW1JskGa000003, 0] [exec] Starting Oracle Universal Installer...
[2014-08 - 07T 12: 44:52.655 + 08:00] [runIAMDeployment - install] [NOTIFICATION] [] [runIAMDeployment-install] [tid: 12] [ecid: 0000KUimAkgD ^ a05zzK6yW1JskGa000003, 0] [exec]
[2014-08 - 07T 12: 44:52.656 + 08:00] [runIAMDeployment - install] [NOTIFICATION] [] [runIAMDeployment-install] [tid: 12] [ecid: 0000KUimAkgD ^ a05zzK6yW1JskGa000003, 0] [exec] check if the CPU speed is greater than 300 MHz. Real MHz 2693 spent
[2014-08 - 07T 12: 44:52.657 + 08:00] [runIAMDeployment - install] [NOTIFICATION] [] [runIAMDeployment-install] [tid: 12] [ecid: 0000KUimAkgD ^ a05zzK6yW1JskGa000003, 0] [exec] space Temp checking: must be greater than 150 MB. Real 1502 MB passed
[2014-08 - 07T 12: 44:52.658 + 08:00] [runIAMDeployment - install] [NOTIFICATION] [] [runIAMDeployment-install] [tid: 12] [ecid: 0000KUimAkgD ^ a05zzK6yW1JskGa000003, 0] [exec] checking swap space: 511 MB of available space, 512 MB required. Failure of < < < <
[2014-08 - 07T 12: 44:52.659 + 08:00] [runIAMDeployment - install] [NOTIFICATION] [] [runIAMDeployment-install] [tid: 12] [ecid: 0000KUimAkgD ^ a05zzK6yW1JskGa000003, 0] [exec]
[2014-08 - 07T 12: 44:52.661 + 08:00] [runIAMDeployment - install] [NOTIFICATION] [] [runIAMDeployment-install] [tid: 12] [ecid: 0000KUimAkgD ^ a05zzK6yW1JskGa000003, 0] [exec] some requirement checks failed. You must meet these conditions before
[2014-08 - 07T 12: 44:52.662 + 08:00] [runIAMDeployment - install] [NOTIFICATION] [] [runIAMDeployment-install] [tid: 12] [ecid: 0000KUimAkgD ^ a05zzK6yW1JskGa000003, 0] [exec]
[2014-08 - 07T 12: 44:52.663 + 08:00] [runIAMDeployment - install] [NOTIFICATION] [] [runIAMDeployment-install] [tid: 12] [ecid: 0000KUimAkgD ^ a05zzK6yW1JskGa000003, 0] [exec] to continue installation.
[2014-08 - 07T 12: 44:52.665 + 08:00] [runIAMDeployment - install] [NOTIFICATION] [] [runIAMDeployment-install] [tid: 12] [ecid: 0000KUimAkgD ^ a05zzK6yW1JskGa000003, 0] [exec]
[2014-08 - 07T 12: 44:52.666 + 08:00] [runIAMDeployment - install] [NOTIFICATION] [] [runIAMDeployment-install] [tid: 12] [ecid: 0000KUimAkgD ^ a05zzK6yW1JskGa000003, 0] [exec]
[2014-08 - 07T 12: 44:52.667 + 08:00] [runIAMDeployment - install] [NOTIFICATION] [] [runIAMDeployment-install] [tid: 12] [ecid: 0000KUimAkgD ^ a05zzK6yW1JskGa000003, 0] [exec] output Oracle Universal Installer, journal for this session can be found at /u02/oracle/product/11.1.2.2.0/idmtop/products/dir/oraInventory/logs/installActions2014-08-07_12-44-52PM.log
[2014-08 - 07T 12: 44:52.694 + 08:00] [runIAMDeployment - install] [NOTIFICATION] [] [runIAMDeployment-install] [tid: 10] [ecid: 0000KUim3M7D ^ a05zzK6yW1JskGa000001, 0] [logStatus] STATE = BUILD_ERROR! TIMESTAMP = 2014-08-07 12:44:52 CST! TARGET = listener-journal-status-in-error! Category = Run.Oui! DOMAIN = NONE! Host name = iamhost1! PRODUCTFAMILY = orchestration. PRODUCT = orchestration. Task = Run.Oui! TaskID = orchestration.orchestration.None.Listener - journal-status-in - error.NONE! MESSAGE = ERROR! DETAIL = exec returned: 255! BUILDFILE=/U02/Oracle/product/11.1.2.2.0/idmlcm/Oracle_IDMLCM1/provisioning/provisioning-build/listener-build.XML! LINENUMBER = 65!
[2014-08 - 07T 12: 44:52.696 + 08:00] [runIAMDeployment - install] [ERROR] [] [runIAMDeployment-install] [tid: 10] [ecid: 0000KUim3M7D ^ a05zzK6yW1JskGa000001, 0] exec returned: 255
[2014-08 - 07T 12: 44:52.702 + 08:00] [runIAMDeployment - install] [NOTIFICATION] [] [runIAMDeployment-install] [tid: 10] [ecid: 0000KUim3M7D ^ a05zzK6yW1JskGa000001, 0] [logStatus] STATE = BUILD_ERROR! TIMESTAMP = 2014-08-07 12:44:52 CST! TARGET = install idm! CATEGORY = OUD! DOMAIN = NONE! Host name = iamhost1! PRODUCTFAMILY = orchestration. PRODUCT = orchestration. TASK = installation OUD! TaskID = orchestration.orchestration.None.Install - idm.NONE! MESSAGE =! DETAIL = OUD installation does not succeed. ! BUILDFILE=/U02/Oracle/product/11.1.2.2.0/idmlcm/Oracle_IDMLCM1/provisioning/provisioning-build/common-Misc-build.XML! LINENUMBER = 108!
[2014-08 - 07T 12: 44:52.708 + 08:00] [runIAMDeployment - install] [ERROR] [] [runIAMDeployment-install] [tid: 10] [ecid: 0000KUim3M7D ^ a05zzK6yW1JskGa000001, 0] OUD installation is unsuccessful.
[2014-08 - 07T 12: 44:52.719 + 08:00] [runIAMDeployment - install] [ERROR] [] [runIAMDeployment-install] [tid: 10] [ecid: 0000KUim3M7D ^ a05zzK6yW1JskGa000001, 0] BUILD FAILED []
/U02/Oracle/product/11.1.2.2.0/idmlcm/Oracle_IDMLCM1/provisioning/IDM-provisioning-build/IDM-orchestration-build.XML:102: the following error occurred during the execution of this line:
/U02/Oracle/product/11.1.2.2.0/idmlcm/Oracle_IDMLCM1/provisioning/IDM-provisioning-build/IDM-orchestration-build.XML:416: the following error occurred during the execution of this line:
/U02/Oracle/product/11.1.2.2.0/idmlcm/Oracle_IDMLCM1/provisioning/IDM-provisioning-build/IDM-orchestration-build.XML:528: the following error occurred during the execution of this line:
/U02/Oracle/product/11.1.2.2.0/idmlcm/Oracle_IDMLCM1/provisioning/IDM-provisioning-build/IDM-orchestration-build.XML:530: the following error occurred during the execution of this line:
/U02/Oracle/product/11.1.2.2.0/idmlcm/Oracle_IDMLCM1/provisioning/IDM-provisioning-build/IDM-orchestration-build.XML:541: the following error occurred during the execution of this line:
/U02/Oracle/product/11.1.2.2.0/idmlcm/Oracle_IDMLCM1/provisioning/IDM-provisioning-build/Oud-build.XML:62: the following error occurred during the execution of this line:
/U02/Oracle/product/11.1.2.2.0/idmlcm/Oracle_IDMLCM1/provisioning/IDM-provisioning-build/Oud-build.XML:519: the following error occurred during the execution of this line:
/U02/Oracle/product/11.1.2.2.0/idmlcm/Oracle_IDMLCM1/provisioning/provisioning-build/common-Misc-build.XML:110: installation of the OUD is unsuccessful.
Total duration: 31 seconds
]]
[2014-08 - 07T 12: 44:52.742 + 08:00] [runIAMDeployment - install] [NOTIFICATION] [FAPROV-01281] [runIAMDeployment - install] [tid: 13] [ecid: 0000KUimAm6D ^ a05zzK6yW1JskGa000004, 0] token of guard of phase of creation in closing bracket.
[2014-08 - 07T 12: 44:52.744 + 08:00] [runIAMDeployment - install] [NOTIFICATION] [FAPROV-01073] [runIAMDeployment - install] [tid: 13] [ecid: 0000KUimAm6D ^ a05zzK6yW1JskGa000004, 0] [arg: u02/oracle/product/11.1.2.2.0/idmlcm/Oracle_IDMLCM1/provisioning/phaseguards/install-iamhost1-FAILED.grd] changing permissions recursively for u02/oracle/product/11.1.2.2.0/idmlcm/Oracle_IDMLCM1/provisioning/phaseguards/install-iamhost1-FAILED.grd. This may take some time...
[2014-08 - 07T 12: 44:52.748 + 08:00] [runIAMDeployment - install] [NOTIFICATION] [FAPROV-01074] [runIAMDeployment - install] [tid: 13] [ecid: 0000KUimAm6D ^ a05zzK6yW1JskGa000004, 0] Permissons changed.
[2014-08 - 07T 12: 44:52.749 + 08:00] [runIAMDeployment - install] [NOTIFICATION] [FAPROV-01197] [runIAMDeployment - install] [tid: 13] [ecid: 0000KUimAm6D ^ a05zzK6yW1JskGa000004, 0] wrote guard phase file /u02/oracle/product/11.1.2.2.0/idmlcm/Oracle_IDMLCM1/provisioning/phaseguards/install-iamhost1-FAILED.grd
Apparently, the OUD Installer fails on:
Check the swap space: 511 MB of available space, 512 MB required. Failed
Check your swapspace and try again.
-
The native application installer fails on Mac 10.5.8 times
Hello
I have an AIR 2.0 application native with a native installer I install silently as part of a series.
On Mac, I have a DMG containing the application native installer and a shell script that copies the native installer application to a temporary folder, then call it passing "-silent" option.For some reason the native installer fails every other hour, i.e. If I install the application and then move it to the trash and then try to re - install, Setup fails.However, if I try to reinstall once more, installation is successful. I can reproduce this problem consistently.This seems to happen only on Mac OS 10.5.8. On 10.6.0 and above all seem to work fine.What can be the reason of this inconsistent behavior?Version of the OS is Mac OS 10.5.8, CPU: 2.8 GHz Intel Core DuoHere is the log for the cases when the installation program fails:Nov 10 20:19:08 Library/Frameworks/Adobe AIR AIR.framework/Versions/1.0/Adobe AIR Installer.app/Contents/MacOS/Adobe Application Application Installer [9579]: checked Application signingNov 10 20:19:08 Library/Frameworks/Adobe AIR AIR.framework/Versions/1.0/Adobe AIR Installer.app/Contents/MacOS/Adobe Application Application Installer [9579]: unpacking/validation complete10 Nov 20:19:08 Library/Frameworks/Adobe AIR AIR.framework/Versions/1.0/Adobe AIR Installer.app/Contents/MacOS/Adobe Application Application Installer [9579]: got an unexpected unrecoverable error while unpacking: [ErrorEvent type = "error" bubbles = false cancelable = false eventPhase = 2 text = "" unhandled exception ArgumentError: Error #2004 "errorID = 2004"]Nov 10 20:19:08 Library/Frameworks/Adobe AIR AIR.framework/Versions/1.0/Adobe AIR Installer.app/Contents/MacOS/Adobe Application Application Installer [9579]: end of the installer with the exit code 7Thanks in advanceAnatoly Hello,
Thank you again for providing your setup of the example program. I checked the problem at 10.5 using your program installation and in the terminal when the command line is preceded with "sudo". It's now connected internally as bug #2758237.
As a solution, could you try empty the trash before each attempt to install? I found that in this way the installation program completes successfully whenever this has been done.
Thank you
Chris
-
How to check the ESXi 4 installation location?
We have server ESXi 4.0 with 2 storage areas... I would check that it contains installation ESXi 4. How can I do this?
Welcome to the VMware forums communities. In the vSphere client, select Configuration > storage. Select each data store, and then click Properties. If you have ESXi installed on one of the LUNS, you'll see a bunch of partitions non-dos measuring device lists.
Dave
VMware communities user moderator
Now available - vSphere Quick Start Guide
You have a system or a PCI with VMDirectPath? Submit your specifications to Officieux VMDirectPath HCL.
-
The Windows 7 Installation failed, error code: 0 x 80070017
I own a legal copy of DVD of Windows 7 64-bit. I'm trying to reinstall it on my computer, which, for the time being, has no operating system installed, but 13% of expanding windows files, I always get the following error message:
Windows cannot install required files. The file may be corrupted or missing. Make sure all files required for installation are available, and restart the installation. Error code: 0 x 80070017
What is the problem, how can I fix it? Is my Windows 7 disc damaged?
If you have downloaded Windows 7 and it burned a DVD test burn again at the slowest speed possible. It is also possible the download may have errors, you can try to download it again.
If you have several hard drives remove all except the one that you install Windows 7, and then replace it after Windows 7 is installed.
Disconnect all external devices except the keyboard and mouse before installing.
If using a video card and the computer has integrated video use and remove the video card.
Unplug the computer from the internet, if you have wireless disable.
RAM (memory) - reduce the amount of RAM. 1 GB if 32-bit installation, 2 GB for 64-bit, then replace RAM if the upgrade was successful. If you added new RAM make sure it is also compatible.
Windows 7 installation disc does not
Just a few troubleshooting steps to see if the drive is bad or if the DVD player is bad:
If you have another DVD player available try to use this drive in your computer instead.
If you have another computer available, try the disc of Windows 7 by using this computer and see if it can read the disc, or if the disc cannot be read and is bad.
In addition, if you purchased the retail version of Windows 7 try to put in the other disk of type bit of the Windows 7 disc and see if it works properly.
If you cannot start Windows 7 installation disc, your computer can boot from other bootable disks?
How to replace Microsoft software
http://support.Microsoft.com/default.aspx/KB/326246
Questions about installing Windows 7?
FAQ - Frequently Asked Questions from Installation Windows 7 & responses -
The Adobe CC Installer failed to initialize [windows OS]
I'm trying to install Adobe Dreamweaver CC, but during the initialization of the installer who I am facing problem.
It's the installer:
It is the first occurrence:
This is the second occurrence:
Try the steps below
Press and hold the on your keyboard windows key and press R key.
Open Run widnow %APPDATA%\microsoft\windows\sendto and go to the Local > Adobe
Delete the files AAMUpdater and OOBE
Then navigate to C:\Program Files (x 86) \Common Files\Adobe
Delete the files Adobe Application Manager and OOBE
Download and install Adobe Application Manager of
Adobe - Adobe Application Manager: for Windows: Adobe Application Manager: thank you
(before you perform the steps open Task Manager and make sure to put an end to all adobe background processes)
Then try to install
-
I have an L7590 attached to my wireless router, ethernet cable that My HP Pavillion is also connected to the router via a cable. Solution Center has stopped working properly after that a power failure brought me to restart everything. Everything works fine for all devices and software with the exception of the solution Center.
I uninstalled solution Center, run the uninstall-L3 batch and reinstalled the printer. I can print to the printer. I can't Solution Center to install.
I need ability to this printer as a scanner and the ability to fax from my computer.
I scanned the forums and have not yet found a solution. Any help is GREATLY appreciated!
I solved my problem, at least for me. I have 4 computers that are sharing the printer so I got it via a cable to connect to my router. He is sitting close to my first computer Clubhouse so I changed the connection of a USB connection to this computer. I have downloaded and run the L4 which takes everything on my desk, associated with the All in One printer Uninstall. I then downloaded the latest version of the software for printer myL7590 and stotred to a directory on my hard drive. Then, I went in this directory and run the Setup program. This time everything worked perfectly. Of course I'm sharing now the printer in my office.
-
The inventory service installation failed
Hi all
I made a new server ESXI 5.1 and I create a virtual machine with windows 2012 for installing vCenter but I have some problems.
When I try to install the inventory Services I get the message: «the fully qualified domain name cannot be resolved with nslookup...» »
But when I run NSlookup, it works very well.
Any idea to solve this problem?
Vcenter is compatible with windows 2012?
Thank you in advance.
Verify that each domain controller properly configured PTR DNS (direct and reverse research areas) records and ensure that the content of the PTR record is accurate. To do this from the Windows command line, you can run the command nslookup on the name and IP:
Name:
nslookup server.domain.com
Server: DNS server
Address: Server IP addressName: Server.domain.com
Address: IP addressIP address:
Nslookup IP address
Server: DNS server
Address: Server IP addressName: Server.domain.com
Address: IP addressYou can also try to delete and join the host in the domain to see if removes the problems of connectivity/nslookup.
Concerning
Girish
-
I wanted to buy Muse CC 2015, but before that I wanted to check the trial version, so I downloaded the trial version. When I was installing the product at the halfway point for the installation process. a pop error message saying "we met the following problems Installer failed to initialize. "Please download Adobe Support Advisor to detect the problem" I click on 'Get Adobe Support Advisor' and then I get here. Can you help me? I use the Mac operating system. I also run Adobe Photoshop CS6 unistall and cleaner, but now when I try to install it again it gives the same message
Hi Ashish,
Please follow the solution 2 in the link below.
Error: "unable to install". Creative cloud office
After that, you can install the application by following the instructions on the link below.
Download and install Adobe Creative Cloud apps
Hope this will solve your problem.
Kind regards
Hervé Khare
-
BT Stack installation fails during the installation of device driver - Satellite R830 Windows 7
I have a Toshiba Satellite Pro R830 x 64 with Windows 7.
Recently, I downloaded new Bluetooth drivers from the Toshiba website support for this laptop and tried to install.
The Bluetooth software is installed but the driver (RFBUS) installation fails with the message "Bluetooth RFBUS driver was not installed successfully".I don't understand how the Toshiba Setup program cannot recognize Toshiba hardware.
As a user deaf that I used successfully the function of Bluetooth with my hearing aids to make Skype calls, now whole Bluetooth function is completely non-functional because of failure battery BT driver install.I tried to uninstall and reinstall several times but still get the same message
Help, what do I do to fix this?
File downloaded to install the site Web of Toshiba's v80012_T20110809_x64 as dated 18/08/2011 11.53
Hello
A question: could you please post you completely portable model number?
I'm not quite sure of this model laptop but most of the portable m press a combo of WLan/BT card. This means that a single module shares WiFi and BT connectivity.In this case its need to install an additional driver like BT filter driver package, but this depends on the module that is installed in the unit.
However, I m wondering why try you to install/upgrade to update this BT stack if it worked correctly in the past
-
I tried to restart my computer, but that is not helping. Any help would be great, that I made plans for work and school I need to finish.
Please see the links below.
- Error: "cannot install initialize | Windows
- The Adobe CC Installer failed to initialize [windows OS]
- I'm having trouble trying to install the trial cc version. The installation program is unable to initialize. Please help me
- Creative cloud Installer fails to boot into OSX Mavericks
Hope this will help you.
Kind regards
Hervé Khare
-
Hello
We are trying to do a fresh install of Oracle Hyperion EPM 11.1.2.3 on Windows 2008 Server R2.
Its a standard deployment with a Foundation Server and an Essbase server.
When you try to install on the server of the Foundation, the EPM System Installer fails to install Oracle database customers.
The first Question we have is, we have decided using Microsoft SQL Server for the repository of Shared Services and therefore would like to know if it is safe to ignore this error and move on.
The second question is, if we need the error pending, we want to know why the installation system fails. Looking at the newspaper, ORACLE_HOME is on something that is not valid or is longer than 128 characters.
The Diagnostics show the below error message:
NEWS: Will copy both pre and post copy copy files C:\Users\SA-ESS~1\AppData\Local\Temp\2\OraInstall2013-11-11_04-16-01PM/oracle.client_Administrator.properties
INFO: Install Properties filename: C:\Users\SA-ESS~1\AppData\Local\Temp\2\OraInstall2013-11-11_04-16-01PM/oracle.client_Administrator.properties
INFO: Value oracle.install.customdeinstallcommand %ORACLE_HOME%/deinstall/deinstall
INFO: Oracle.install.customizedeinstall set to true
INFO: The value oracle.installer.ORACLE_BASEvar ORACLE_BASE
INFO: The value oracle.installer.LibPerms 0755
INFO: Value oracle.installer.summary_expand_nodes NewLangs, Global, space, Langs
INFO: The value oracle.installer.LibExtns .sl,.sl.11.1, .so,.so.11.1,.sl.1.0,.so.1.0
INFO: oracle.installer.mandatorySetup set to true
INFO: oracle.installer.useORACLE_BASE set to true
INFO: Oracle.installer.removeallfiles set to true
INFO: Oracle.installer.additionaltool_continue_onerror set to true
INFO:
Specify Home Details Page *.
INFO: Setting the property "OracleHome (ORACLE_HOME)' ' D:\Oracle\Middleware\EPMSystem11R1\... \dbclient32'." Has received the value of the command line.
INFO: Setting the property ' OracleHomeName (ORACLE_HOME_NAME)' to 'OraClient11g32_sa-essbaseapp '. Has received the value of the command line.
INFO: Definition of the 'OracleBase (ORACLE_BASE)' property ' D:\Oracle\Middleware\EPMSystem11R1\...------'. Has received the value of the command line.
GRAVE: The Oracle Home name is not valid. Oracle Home names must be 128 characters or less and contain only alphanumeric characters and underscores.
INFO: The attention of unregistered Manager, using the features of the Super class
INFO: The attention of unregistered Manager, using the features of the Super class
INFO: User selected: Yes/OK
INFO: Closing OUISetupDriver.JobExecutorThread
GRAVE: [FATAL] [INS-10008] Session initialization failed
CAUSE: An unexpected error occurred during initialization of the session.
ACTION: Contact Oracle Support Services or view logs
SUMMARY:
- .
See associated stacktrace #oracle.install.commons.util.exception.DefaultErrorAdvisor:1096
INFO: Tips are ABORT
GRAVE: Unconditional exit
INFO: Add ExitStatus FAILURE to exit status set
INFO: Find the status of output more suitable for the current application
INFO: Exit status is - 1
NEWS: Stop Oracle Client install
I got my answer in the newspaper.
The ORACLE_HOME_NAME is the question.
Our deployment account has a hyphen -, and so the Yes program is unable to initialize.
-
OP: Action Center... PC problem: 1 important message
After the failure of the attempt to install the JAVA update, I received this message from Action Center... Windows cannot check the updates. So I was taken to the dialog box and retried to check the updates of windows fails again with the code D0000034. Also did a system restore to the place before the installation of JAVA update attempt, but was no help. Can you help me?
Hello Irfan,
Thanks again for your response. Since your last I discovered through my system status (Control Panel), I wrote that my product ID and the Windows 7 activation status not available. So I followed instuctions to help and microsoft support to activate. Yet once, I got the error code D0000034 as before with the problem of update. However, I was given the opportunity to phone, but received no phone #. I bought the DVD of Windows 7 and installed on the PC that was custom built for me. On the site Web microsoft help and support, I was asked for the product ID, which according to them is a # 20 numbers. Not the only one, I have is the product key which is one 25-alpha-numeric. I tried to enter only and does not pass. This is why I say that I can pay for help since I did not ' have the product ID. Maybe it isn't your area of expertise, Irfan, but I was hoping... I re - install windows on last April when I got in trouble and probably did not re - activate? What do you think? If you can get back on track, I would be very grateful and thank you once again to be a big help!
wandrinstar
Please ignore above request. I have since re-activated Windows and the problem was solved with technical assistance telephone and thank you again for your help, Irfan. Also thanks to all the people answering the phone at microsoft. The experience I had was really a pleasure. I wasn't expecting such an attitude courteous and professional.
Keep up the good work,
wandrinstar
Maybe you are looking for
-
All I get is red streaks on the screen on my Inbox
I must have something clicked on my Inbox, and all I get is red-stripes angled across my screen How do I get back my Inbox on my computer screen to work with? I also want to send a new message with the side-bar containing my email addresses
-
headphones not an option for audio output
Hi, I have a macbook air, which is fairly new and when I plug in my headphones the sound from my internal speakers instead, and when I go out it does not give my optional headset. He literally worked was about 3 hours ago and now it isn't. Thanks in
-
Restore the Image of the camera target in VBAI
I use Vision Builder AI 2012 with Smart camera NI1772C. I can create target camera Image (Menu > target > create a target Image) but is it possible to restore the image on the camera? The image is similar to PC save the image that can be safely sto
-
Startup of Windows Developer Preview in Virtual PC installation CD does not
When I boot Windows 8, I just get a black screen with 4 blue blocks in the corner in virtual PC Can I fix They look like this, but as a square [][][][] Help, please
-
Need driver for GDR-8082N DVD/CD player
My old Dell D600 of Lat cannot find what DVD/CD player. Cannot use the Win XP disks to solve the problem of course. Can I get the driver files for the problem of Microsoft?