Check the configuration of Redo Log Archives to

DB version: 10 gr 2, 11 2 GR
Version of the operating system: Solaris 5.10, AIX 6.1

While allowing for a DB from Production 2 node RAC, I made a mistake specifying LOG_ARCHIVE_DEST (a typing error).

After I brought the DB to the top (open) after you have enabled archiving, I tested the journal using switching

SQL> alter system switch logfile;

System altered

and had no error.

Later, I realized, archiving does not work. But I wonder, why I have no error for

SQL> alter system switch logfile;

Errors may have been recorded in the log of alerts. Since then I have no error from sqlplus to the command above, I thought everything was fine.

But the following command triggered error.

SQL> ALTER SYSTEM ARCHIVE LOG CURRENT;
ALTER SYSTEM ARCHIVE LOG CURRENT
*
ERROR at line 1:
ORA-16038: log 4 sequence# 127 cannot be archived
ORA-00254: error in archive control string ''
ORA-00312: online log 4 thread 2: '+LTMPROD_DATA/LTMPROD/redo04.log'
ORA-15173: entry 'ltmprod_arch' does not exist in directory '/'

Should what command I use to ensure that activation of Archive was successful?

Hello

Any more ways on how professional to check whether the archive allowing a success?

ALWAYS... After putting data in ARCHIVE MODE, you must force the newspaper archive database.

SQL > ARCHIVE LOG LIST; # To check status

SQL > ALTER SYSTEM ARCHIVE LOG CURRENT; # This command must be executed sucessfull.

Query V$ARCHIVE_LOG or use RMAN to check path/location of ARCHIVELOG. 

$ rman target /
RMAN > LIST ARCHIVELOG ALL;

Use ARCHIVE LOG SWITCH LOGFILE command to force again them to archive the disk, because they have a slight difference.

JOURNAL of ARCHIVING is synchronous, this command waits until the online redo log has completed writing the log file again the file system, if again is not archived error is thrown on command prompt.

SWITCH LOGFILE is asynchronous, this command start only switch / archive run in the background if ARCH process cannot finish writing the archivelog directory on file the error not returned not invite since he was released.

You can use this technical note:
* How to enable archiving ON and OFF [ID 69739.1] *.

Hope this helps,
Levi Pereira

Published by: Levi Pereira on September 23, 2011 01:28

Tags: Database

Similar Questions

NAC AD SSO error: could not start the SSO service. Please check the configuration.

Hi, can someone please help me with a problem of SSO?

I'm trying to start the SINGLE sign-on service, but when I try to update I get the error message: "error: could not start the SSO service.» Please check the configuration. »

The announcement is a Windows 2008 Server Standard R2 (64-bit) running at a 2003 domain functional level. (several servers) with the deployment of the OOB

I was unable to ping the advertising server CASE CLI, so I created a static route to the announcement on the server of the ANC, and after that I successfully of the NAC Server ping IP address of the AD. The nac_server.log when I try to start the SSO:

[[email protected]/ * / _primary_ag ~] # ping 10.200.0.3

PING 10.200.0.3 (10.200.0.3) 56 (84) bytes of data.

64 bytes from 10.200.0.3: icmp_seq = 1 ttl = 128 time = 0,247 ms

64 bytes from 10.200.0.3: icmp_seq = 2 ttl = 128 time = 0,232 ms

-ping - 10.200.0.3 statistics

2 packets transmitted, 2 received, 0% packet loss, time 999ms

RTT min/avg/max/leg = 0.232/0.239/0.247/0.017 ms

[[email protected]/ * / _primary_ag ~] # tail-f /perfigo/access/tomcat/logs/nac_server.log

2012-07-27 17:20:39.079-0300 connection TCP RMI 83 - 10.200.48.101 DEBUG com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper - unregisterMBean: DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo

2012-07-27 17:20:39.079-0300 connection TCP RMI 83 - 10.200.48.101 DEBUG com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper - unregisterMBean: DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo:DURATION = 0

2012-07-27 17:20:39.080-0300 connection TCP RMI 83 - 10.200.48.101 com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper - createMBean DEBUG: com.perfigo.wlan.jmx.admin.ServerInfo:DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo:CAS:type = MLet, name = casLoader

2012-07-27 17:20:39.080-0300 connection TCP RMI 83 - 10.200.48.101 com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper - createMBean DEBUG: com.perfigo.wlan.jmx.admin.ServerInfo:DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo:CAS:type = MLet, name = casLoader:DURATION = 0

2012-07-27 17:20:39.080 connection TCP RMI 83 - 10.200.48.101 DEBUG com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper --0300 call: DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo:init

2012-07-27 17:20:39.080 connection TCP RMI 83 - 10.200.48.101 DEBUG com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper --0300 call: DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo:init:DURATION = 0

2012-07-27 17:20:39.081 connection TCP RMI 83 - 10.200.48.101 DEBUG com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper --0300 call: DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo:isServerInSync

2012-07-27 17:20:39.081 connection TCP RMI 83 - 10.200.48.101 DEBUG com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper --0300 call: DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo:isServerInSync:DURATION = 0

2012-07-27 17:20:39.081-0300 connection TCP RMI 83 - 10.200.48.101 com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper - getAttribute DEBUG: DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo:CurrMgrEth0Ip

2012-07-27 17:20:39.081-0300 connection TCP RMI 83 - 10.200.48.101 com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper - getAttribute DEBUG: DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo:CurrMgrEth0Ip:DURATION = 0

2012-07-27 17:20:41.775-0300 connection TCP RMI 83 - 10.200.48.101 com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper - isRegistered DEBUG: DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo

2012-07-27 17:20:41.775-0300 connection TCP RMI 83 - 10.200.48.101 com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper - isRegistered DEBUG: DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo:DURATION = 0

2012-07-27 17:20:41.775-0300 connection TCP RMI 83 - 10.200.48.101 DEBUG com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper - unregisterMBean: DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo

2012-07-27 17:20:41.775-0300 connection TCP RMI 83 - 10.200.48.101 DEBUG com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper - unregisterMBean: DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo:DURATION = 0

2012-07-27 17:20:41.776-0300 connection TCP RMI 83 - 10.200.48.101 com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper - createMBean DEBUG: com.perfigo.wlan.jmx.admin.ServerInfo:DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo:CAS:type = MLet, name = casLoader

2012-07-27 17:20:41.776-0300 connection TCP RMI 83 - 10.200.48.101 com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper - createMBean DEBUG: com.perfigo.wlan.jmx.admin.ServerInfo:DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo:CAS:type = MLet, name = casLoader:DURATION = 0

2012-07-27 17:20:41.777 connection TCP RMI 83 - 10.200.48.101 DEBUG com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper --0300 call: DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo:init

2012-07-27 17:20:41.777 connection TCP RMI 83 - 10.200.48.101 DEBUG com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper --0300 call: DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo:init:DURATION = 0

2012-07-27 17:20:41.777-0300 connection TCP RMI 83 - 10.200.48.101 com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper - setAttribute DEBUG: DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo:SSOState = 1

2012-07-27 17:20:41.777-0300 connection TCP RMI 83 - 10.200.48.101 com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper - setAttribute DEBUG: DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo:SSOState = 1:DURATION = 0

2012-07-27 17:20:41.778-0300 connection TCP RMI 83 - 10.200.48.101 com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper - setAttribute DEBUG: DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo:SSOUser = casuser

2012-07-27 17:20:41.778-0300 connection TCP RMI 83 - 10.200.48.101 com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper - setAttribute DEBUG: DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo:SSOUser = casuser:DURATION = 0

2012-07-27 17:20:41.778-0300 connection TCP RMI 83 - 10.200.48.101 com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper - setAttribute DEBUG: DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo:SSOKdc = nissin.com.br

2012-07-27 17:20:41.778-0300 connection TCP RMI 83 - 10.200.48.101 com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper - setAttribute DEBUG: DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo:SSOKdc = nissin.com.br:DURATION = 0

2012-07-27 17:20:41.779-0300 connection TCP RMI 83 - 10.200.48.101 com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper - setAttribute DEBUG: DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo:SSORealm = NISSIN.COM.BR

2012-07-27 17:20:41.779-0300 connection TCP RMI 83 - 10.200.48.101 com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper - setAttribute DEBUG: DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo:SSORealm = NISSIN.COM.BR:DURATION = 0

2012-07-27 17:20:41.779 connection TCP RMI 83 - 10.200.48.101 DEBUG com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper --0300 call: DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo:save

2012-07-27 17:20:41.779 connection TCP RMI 83 - 10.200.48.101 DEBUG com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper --0300 call: DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo:save:DURATION = 0

2012-07-27 17:20:41.780 connection TCP RMI 83 - 10.200.48.101 DEBUG com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper --0300 call: DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo:startSSOServer

2012-07-27 17:20:41.780 connection TCP RMI 83 - 10.200.48.101 DEBUG com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper --0300 call: DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo:startSSOServer:DURATION = 0

2012-07-27 17:20:58.605-0300 TRACE Timer-0 com.perfigo.wlan.jmx.admin.FailSafeManager - FailSafeManager is running: {0.85,0.3, [0: 15:15]}: DETECT_INTERVAL = 20:DETECT_TIME_OUT = 300

2012-07-27 17:20:58.608-0300 TRACE Timer-0 com.perfigo.wlan.jmx.admin.FailSafeManager - FailSafeManager http_code = 200: {0.85,0.3, [0: 15:15]}

[2012-07-27 17:20:58.608-0300 TRACE Timer-0 com.perfigo.wlan.jmx.admin.FailSafeManager - FailSafeManager go to sleep: delay of {0.85,0.3, [0: 15:15]}] = 19997

[2012-07-27 17:21:08.892-0300 connection TCP RMI 83 - 10.200.48.101 DEBUG com.perfigo.wlan.ssl.SSLLog - RMISocketFactory: removed socket: 173d72d [TLS_RSA_WITH_AES_128_CBC_SHA: Socket[addr=/10.200.48.101,port=11093,localport=1099]]

2012-07-27 17:21:08.892-0300 connection TCP RMI 83 - 10.200.48.101 com.perfigo.wlan.ssl.SSLLog - RMISocketFactory:CACHED_SOCKETS_SIZE = 0 DEBUG

2012-07-27 17:21:08.892-0300 connection TCP RMI 83 - 10.200.48.101 com.perfigo.wlan.ssl.SSLLog - RMISocketFactory:CACHED_SOCKETSE DEBUG =]

2012-07-27 17:21:08.892-0300 connection TCP RMI 83 - 10.200.48.101 com.perfigo.wlan.ssl.SSLLog - RMISocketFactory:CACHED_SOCKETS_SIZE = 0 DEBUG

2012-07-27 17:21:08.892-0300 connection TCP RMI 83 - 10.200.48.101 com.perfigo.wlan.ssl.SSLLog - RMISocketFactory:CACHED_SOCKETSE DEBUG =]

2012-07-27 17:21:18.610-0300 TRACE Timer-0 com.perfigo.wlan.jmx.admin.FailSafeManager - FailSafeManager is running: {0.85,0.3, [0: 15:15]}: DETECT_INTERVAL = 20:DETECT_TIME_OUT = 300

2012-07-27 17:21:18.613-0300 TRACE Timer-0 com.perfigo.wlan.jmx.admin.FailSafeManager - FailSafeManager http_code = 200: {0.85,0.3, [0: 15:15]}

[2012-07-27 17:21:18.613-0300 TRACE Timer-0 com.perfigo.wlan.jmx.admin.FailSafeManager - FailSafeManager go to sleep: delay of {0.85,0.3, [0: 15:15]}] = 19997

2012-07-27 17:21:38.615-0300 TRACE Timer-0 com.perfigo.wlan.jmx.admin.FailSafeManager - FailSafeManager is running: {0.85,0.3, [0: 15:15]}: DETECT_INTERVAL = 20:DETECT_TIME_OUT = 300

2012-07-27 17:21:38.618-0300 TRACE Timer-0 com.perfigo.wlan.jmx.admin.FailSafeManager - FailSafeManager http_code = 200: {0.85,0.3, [0: 15:15]}

[2012-07-27 17:21:38.618-0300 TRACE Timer-0 com.perfigo.wlan.jmx.admin.FailSafeManager - FailSafeManager go to sleep: delay of {0.85,0.3, [0: 15:15]}] = 19997

2012-07-27 17:21:41.794-0300 DEBUG Thread-246 com.perfigo.wlan.common.HttpClientResource - go to url https://10.200.48.100:443 / wlan/gss/GSSNotificationServlet ...

[2012-07-27 17:21:41.813-0300 HandshakeCompletedNotify-threaded DEBUG com.perfigo.wlan.ssl.SSLLog - RMISocketFactory: added the socket: 1e7e7ac [TLS_RSA_WITH_AES_128_CBC_SHA: Socket[addr=/10.200.48.101,port=19660,localport=1099]]

2012-07-27 17:21:41.814-0300 HandshakeCompletedNotify-threaded DEBUG com.perfigo.wlan.ssl.SSLLog - RMISocketFactory:CACHED_SOCKETS_SIZE = 1

[2012-07-27 17:21:41.814-0300 HandshakeCompletedNotify-threaded DEBUG com.perfigo.wlan.ssl.SSLLog - RMISocketFactory:CACHED_SOCKETSE = [1e7e7ac [TLS_RSA_WITH_AES_128_CBC_SHA: Socket[addr=/10.200.48.101,port=19660,localport=1099]]]

2012-07-27 17:21:41.814-0300 connection TCP RMI 85 - 10.200.48.101 com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper - getAttribute DEBUG: DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo:SSOStatus

2012-07-27 17:21:41.814-0300 connection TCP RMI 85 - 10.200.48.101 com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper - getAttribute DEBUG: DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo:SSOStatus:DURATION = 0

2012-07-27 17:21:44.103-0300 connection TCP RMI 85 - 10.200.48.101 com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper - isRegistered DEBUG: DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo

2012-07-27 17:21:44.103-0300 connection TCP RMI 85 - 10.200.48.101 com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper - isRegistered DEBUG: DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo:DURATION = 0

2012-07-27 17:21:44.104-0300 connection TCP RMI 85 - 10.200.48.101 DEBUG com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper - unregisterMBean: DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo

2012-07-27 17:21:44.104-0300 connection TCP RMI 85 - 10.200.48.101 DEBUG com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper - unregisterMBean: DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo:DURATION = 0

2012-07-27 17:21:44.104-0300 connection TCP RMI 85 - 10.200.48.101 com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper - createMBean DEBUG: com.perfigo.wlan.jmx.admin.ServerInfo:DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo:CAS:type = MLet, name = casLoader

2012-07-27 17:21:44.104-0300 connection TCP RMI 85 - 10.200.48.101 com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper - createMBean DEBUG: com.perfigo.wlan.jmx.admin.ServerInfo:DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo:CAS:type = MLet, name = casLoader:DURATION = 0

2012-07-27 17:21:44.105 connection TCP RMI 85 - 10.200.48.101 DEBUG com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper --0300 call: DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo:init

2012-07-27 17:21:44.105 connection TCP RMI 85 - 10.200.48.101 DEBUG com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper --0300 call: DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo:init:DURATION = 0

2012-07-27 17:21:44.105 connection TCP RMI 85 - 10.200.48.101 DEBUG com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper --0300 call: DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo:isServerInSync

2012-07-27 17:21:44.106 connection TCP RMI 85 - 10.200.48.101 DEBUG com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper --0300 call: DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo:isServerInSync:DURATION = 1

2012-07-27 17:21:44.106-0300 connection TCP RMI 85 - 10.200.48.101 com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper - getAttribute DEBUG: DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo:CurrMgrEth0Ip

2012-07-27 17:21:44.106-0300 connection TCP RMI 85 - 10.200.48.101 com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper - getAttribute DEBUG: DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo:CurrMgrEth0Ip:DURATION = 0

2012-07-27 17:21:49.105-0300 connection TCP RMI 85 - 10.200.48.101 com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper - isRegistered DEBUG: DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo

2012-07-27 17:21:49.105-0300 connection TCP RMI 85 - 10.200.48.101 com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper - isRegistered DEBUG: DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo:DURATION = 0

2012-07-27 17:21:49.105-0300 connection TCP RMI 85 - 10.200.48.101 DEBUG com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper - unregisterMBean: DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo

2012-07-27 17:21:49.105-0300 connection TCP RMI 85 - 10.200.48.101 DEBUG com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper - unregisterMBean: DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo:DURATION = 0

2012-07-27 17:21:49.106-0300 connection TCP RMI 85 - 10.200.48.101 com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper - createMBean DEBUG: com.perfigo.wlan.jmx.admin.ServerInfo:DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo:CAS:type = MLet, name = casLoader

2012-07-27 17:21:49.106-0300 connection TCP RMI 85 - 10.200.48.101 com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper - createMBean DEBUG: com.perfigo.wlan.jmx.admin.ServerInfo:DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo:CAS:type = MLet, name = casLoader:DURATION = 0

2012-07-27 17:21:49.107 connection TCP RMI 85 - 10.200.48.101 DEBUG com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper --0300 call: DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo:init

2012-07-27 17:21:49.107 connection TCP RMI 85 - 10.200.48.101 DEBUG com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper --0300 call: DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo:init:DURATION = 0

2012-07-27 17:21:49.107 connection TCP RMI 85 - 10.200.48.101 DEBUG com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper --0300 call: DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo:isServerInSync

2012-07-27 17:21:49.107 connection TCP RMI 85 - 10.200.48.101 DEBUG com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper --0300 call: DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo:isServerInSync:DURATION = 0

2012-07-27 17:21:49.108-0300 connection TCP RMI 85 - 10.200.48.101 com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper - getAttribute DEBUG: DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo:CurrMgrEth0Ip

2012-07-27 17:21:49.108-0300 connection TCP RMI 85 - 10.200.48.101 com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper - getAttribute DEBUG: DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo:CurrMgrEth0Ip:DURATION = 0

2012-07-27 17:21:54.107-0300 connection TCP RMI 85 - 10.200.48.101 com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper - isRegistered DEBUG: DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo

2012-07-27 17:21:54.107-0300 connection TCP RMI 85 - 10.200.48.101 com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper - isRegistered DEBUG: DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo:DURATION = 0

2012-07-27 17:21:54.108-0300 connection TCP RMI 85 - 10.200.48.101 DEBUG com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper - unregisterMBean: DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo

2012-07-27 17:21:54.108-0300 connection TCP RMI 85 - 10.200.48.101 DEBUG com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper - unregisterMBean: DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo:DURATION = 0

2012-07-27 17:21:54.108-0300 connection TCP RMI 85 - 10.200.48.101 com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper - createMBean DEBUG: com.perfigo.wlan.jmx.admin.ServerInfo:DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo:CAS:type = MLet, name = casLoader

2012-07-27 17:21:54.108-0300 connection TCP RMI 85 - 10.200.48.101 com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper - createMBean DEBUG: com.perfigo.wlan.jmx.admin.ServerInfo:DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo:CAS:type = MLet, name = casLoader:DURATION = 0

2012-07-27 17:21:54.109 connection TCP RMI 85 - 10.200.48.101 DEBUG com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper --0300 call: DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo:init

2012-07-27 17:21:54.109 connection TCP RMI 85 - 10.200.48.101 DEBUG com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper --0300 call: DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo:init:DURATION = 0

2012-07-27 17:21:54.110 connection TCP RMI 85 - 10.200.48.101 DEBUG com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper --0300 call: DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo:isServerInSync

2012-07-27 17:21:54.110 connection TCP RMI 85 - 10.200.48.101 DEBUG com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper --0300 call: DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo:isServerInSync:DURATION = 0

2012-07-27 17:21:54.110-0300 connection TCP RMI 85 - 10.200.48.101 com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper - getAttribute DEBUG: DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo:CurrMgrEth0Ip

2012-07-27 17:21:54.110-0300 connection TCP RMI 85 - 10.200.48.101 com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper - getAttribute DEBUG: DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo:CurrMgrEth0Ip:DURATION = 0

2012-07-27 17:21:58.619-0300 TRACE Timer-0 com.perfigo.wlan.jmx.admin.FailSafeManager - FailSafeManager is running: {0.85,0.3, [0: 15:15]}: DETECT_INTERVAL = 20:DETECT_TIME_OUT = 300

2012-07-27 17:21:58.622-0300 TRACE Timer-0 com.perfigo.wlan.jmx.admin.FailSafeManager - FailSafeManager http_code = 200: {0.85,0.3, [0: 15:15]}

[2012-07-27 17:21:58.622-0300 TRACE Timer-0 com.perfigo.wlan.jmx.admin.FailSafeManager - FailSafeManager go to sleep: delay of {0.85,0.3, [0: 15:15]}] = 19997

2012-07-27 17:21:59.109-0300 connection TCP RMI 85 - 10.200.48.101 com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper - isRegistered DEBUG: DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo

2012-07-27 17:21:59.109-0300 connection TCP RMI 85 - 10.200.48.101 com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper - isRegistered DEBUG: DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo:DURATION = 0

2012-07-27 17:21:59.110-0300 connection TCP RMI 85 - 10.200.48.101 DEBUG com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper - unregisterMBean: DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo

2012-07-27 17:21:59.110-0300 connection TCP RMI 85 - 10.200.48.101 DEBUG com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper - unregisterMBean: DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo:DURATION = 0

2012-07-27 17:21:59.110-0300 connection TCP RMI 85 - 10.200.48.101 com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper - createMBean DEBUG: com.perfigo.wlan.jmx.admin.ServerInfo:DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo:CAS:type = MLet, name = casLoader

2012-07-27 17:21:59.110-0300 connection TCP RMI 85 - 10.200.48.101 com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper - createMBean DEBUG: com.perfigo.wlan.jmx.admin.ServerInfo:DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo:CAS:type = MLet, name = casLoader:DURATION = 0

2012-07-27 17:21:59.111 connection TCP RMI 85 - 10.200.48.101 DEBUG com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper --0300 call: DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo:init

2012-07-27 17:21:59.111 connection TCP RMI 85 - 10.200.48.101 DEBUG com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper --0300 call: DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo:init:DURATION = 0

2012-07-27 17:21:59.112 connection TCP RMI 85 - 10.200.48.101 DEBUG com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper --0300 call: DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo:isServerInSync

2012-07-27 17:21:59.112 connection TCP RMI 85 - 10.200.48.101 DEBUG com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper --0300 call: DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo:isServerInSync:DURATION = 0

2012-07-27 17:21:59.113-0300 connection TCP RMI 85 - 10.200.48.101 com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper - getAttribute DEBUG: DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo:CurrMgrEth0Ip

2012-07-27 17:21:59.113-0300 connection TCP RMI 85 - 10.200.48.101 com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper - getAttribute DEBUG: DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo:CurrMgrEth0Ip:DURATION = 0

2012-07-27 17:22:04.111-0300 connection TCP RMI 85 - 10.200.48.101 com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper - isRegistered DEBUG: DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo

2012-07-27 17:22:04.111-0300 connection TCP RMI 85 - 10.200.48.101 com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper - isRegistered DEBUG: DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo:DURATION = 0

2012-07-27 17:22:04.112-0300 connection TCP RMI 85 - 10.200.48.101 DEBUG com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper - unregisterMBean: DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo

2012-07-27 17:22:04.112-0300 connection TCP RMI 85 - 10.200.48.101 DEBUG com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper - unregisterMBean: DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo:DURATION = 0

2012-07-27 17:22:04.112-0300 connection TCP RMI 85 - 10.200.48.101 com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper - createMBean DEBUG: com.perfigo.wlan.jmx.admin.ServerInfo:DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo:CAS:type = MLet, name = casLoader

2012-07-27 17:22:04.113-0300 connection TCP RMI 85 - 10.200.48.101 com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper - createMBean DEBUG: com.perfigo.wlan.jmx.admin.ServerInfo:DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo:CAS:type = MLet, name = casLoader:DURATION = 1

2012-07-27 17:22:04.113 connection TCP RMI 85 - 10.200.48.101 DEBUG com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper --0300 call: DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo:init

2012-07-27 17:22:04.113 connection TCP RMI 85 - 10.200.48.101 DEBUG com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper --0300 call: DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo:init:DURATION = 0

2012-07-27 17:22:04.114 connection TCP RMI 85 - 10.200.48.101 DEBUG com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper --0300 call: DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo:isServerInSync

2012-07-27 17:22:04.114 connection TCP RMI 85 - 10.200.48.101 DEBUG com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper --0300 call: DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo:isServerInSync:DURATION = 0

2012-07-27 17:22:04.114-0300 connection TCP RMI 85 - 10.200.48.101 com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper - getAttribute DEBUG: DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo:CurrMgrEth0Ip

2012-07-27 17:22:04.114-0300 connection TCP RMI 85 - 10.200.48.101 com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper - getAttribute DEBUG: DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo:CurrMgrEth0Ip:DURATION = 0

2012-07-27 17:22:09.114-0300 connection TCP RMI 85 - 10.200.48.101 com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper - isRegistered DEBUG: DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo

2012-07-27 17:22:09.114-0300 connection TCP RMI 85 - 10.200.48.101 com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper - isRegistered DEBUG: DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo:DURATION = 0

2012-07-27 17:22:09.114-0300 connection TCP RMI 85 - 10.200.48.101 DEBUG com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper - unregisterMBean: DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo

2012-07-27 17:22:09.114-0300 connection TCP RMI 85 - 10.200.48.101 DEBUG com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper - unregisterMBean: DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo:DURATION = 0

2012-07-27 17:22:09.115-0300 connection TCP RMI 85 - 10.200.48.101 com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper - createMBean DEBUG: com.perfigo.wlan.jmx.admin.ServerInfo:DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo:CAS:type = MLet, name = casLoader

2012-07-27 17:22:09.115-0300 connection TCP RMI 85 - 10.200.48.101 com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper - createMBean DEBUG: com.perfigo.wlan.jmx.admin.ServerInfo:DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo:CAS:type = MLet, name = casLoader:DURATION = 0

2012-07-27 17:22:09.116 connection TCP RMI 85 - 10.200.48.101 DEBUG com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper --0300 call: DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo:init

2012-07-27 17:22:09.116 connection TCP RMI 85 - 10.200.48.101 DEBUG com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper --0300 call: DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo:init:DURATION = 1

2012-07-27 17:22:09.116 connection TCP RMI 85 - 10.200.48.101 DEBUG com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper --0300 call: DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo:isServerInSync

2012-07-27 17:22:09.116 connection TCP RMI 85 - 10.200.48.101 DEBUG com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper --0300 call: DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo:isServerInSync:DURATION = 0

2012-07-27 17:22:09.117-0300 connection TCP RMI 85 - 10.200.48.101 com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper - getAttribute DEBUG: DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo:CurrMgrEth0Ip

2012-07-27 17:22:09.117-0300 connection TCP RMI 85 - 10.200.48.101 com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper - getAttribute DEBUG: DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo:CurrMgrEth0Ip:DURATION = 0

2012-07-27 17:22:14.116-0300 connection TCP RMI 85 - 10.200.48.101 com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper - isRegistered DEBUG: DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo

2012-07-27 17:22:14.116-0300 connection TCP RMI 85 - 10.200.48.101 com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper - isRegistered DEBUG: DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo:DURATION = 0

2012-07-27 17:22:14.116-0300 connection TCP RMI 85 - 10.200.48.101 DEBUG com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper - unregisterMBean: DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo

2012-07-27 17:22:14.116-0300 connection TCP RMI 85 - 10.200.48.101 DEBUG com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper - unregisterMBean: DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo:DURATION = 0

2012-07-27 17:22:14.117-0300 connection TCP RMI 85 - 10.200.48.101 com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper - createMBean DEBUG: com.perfigo.wlan.jmx.admin.ServerInfo:DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo:CAS:type = MLet, name = casLoader

2012-07-27 17:22:14.117-0300 connection TCP RMI 85 - 10.200.48.101 com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper - createMBean DEBUG: com.perfigo.wlan.jmx.admin.ServerInfo:DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo:CAS:type = MLet, name = casLoader:DURATION = 0

2012-07-27 17:22:14.117 connection TCP RMI 85 - 10.200.48.101 DEBUG com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper --0300 call: DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo:init

2012-07-27 17:22:14.118 connection TCP RMI 85 - 10.200.48.101 DEBUG com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper --0300 call: DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo:init:DURATION = 1

2012-07-27 17:22:14.118 connection TCP RMI 85 - 10.200.48.101 DEBUG com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper --0300 call: DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo:isServerInSync

2012-07-27 17:22:14.118 connection TCP RMI 85 - 10.200.48.101 DEBUG com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper --0300 call: DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo:isServerInSync:DURATION = 0

2012-07-27 17:22:14.119-0300 connection TCP RMI 85 - 10.200.48.101 com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper - getAttribute DEBUG: DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo:CurrMgrEth0Ip

2012-07-27 17:22:14.119-0300 connection TCP RMI 85 - 10.200.48.101 com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper - getAttribute DEBUG: DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo:CurrMgrEth0Ip:DURATION = 0

2012-07-27 17:22:17.017-0300 DEBUG RMI RenewClean-[10.200.2.103:1099] com.perfigo.wlan.ssl.SSLLog - RMISocketFactory:CACHED_SOCKETS_SIZE = 2

[[2012-07-27 17:22:17.017 - 0300 DEBUG RMI RenewClean-[10.200.2.103:1099] com.perfigo.wlan.ssl.SSLLog - RMISocketFactory:CACHED_SOCKETSE = [1e7e7ac [TLS_RSA_WITH_AES_128_CBC_SHA: Socket[addr=/10.200.48.101,port=19660,localport=1099]], 1871db1 [TLS_RSA_WITH_AES_128_CBC_SHA: Socket[addr=server_primary_ag/10.200.2.103,port=1099,localport=12312]]]

[2012-07-27 17:22:17.017-0300 HandshakeCompletedNotify-threaded DEBUG com.perfigo.wlan.ssl.SSLLog - RMISocketFactory: socket: 59725 c added [TLS_RSA_WITH_AES_128_CBC_SHA: Socket[addr=/10.200.2.103,port=12312,localport=1099]]

2012-07-27 17:22:17.017-0300 HandshakeCompletedNotify-threaded DEBUG com.perfigo.wlan.ssl.SSLLog - RMISocketFactory:CACHED_SOCKETS_SIZE = 3

[[[2012-07-27 17:22:17.017-0300 HandshakeCompletedNotify-threaded DEBUG com.perfigo.wlan.ssl.SSLLog - RMISocketFactory:CACHED_SOCKETSE = [1e7e7ac [TLS_RSA_WITH_AES_128_CBC_SHA: Socket[addr=/10.200.48.101,port=19660,localport=1099]], 1871db1 [TLS_RSA_WITH_AES_128_CBC_SHA: Socket[addr=server_primary_ag/10.200.2.103,port=1099,localport=12312]], 59725 c [TLS_RSA_WITH_AES_128_CBC_SHA: Socket[addr=/10.200.2.103,port=12312,localport=1099]]]

2012-07-27 17:22:18.624-0300 TRACE Timer-0 com.perfigo.wlan.jmx.admin.FailSafeManager - FailSafeManager is running: {0.85,0.3, [0: 15:15]}: DETECT_INTERVAL = 20:DETECT_TIME_OUT = 300

2012-07-27 17:22:18.627-0300 TRACE Timer-0 com.perfigo.wlan.jmx.admin.FailSafeManager - FailSafeManager http_code = 200: {0.85,0.3, [0: 15:15]}

[2012-07-27 17:22:18.627-0300 TRACE Timer-0 com.perfigo.wlan.jmx.admin.FailSafeManager - FailSafeManager go to sleep: delay of {0.85,0.3, [0: 15:15]}] = 19997

2012-07-27 17:22:19.118-0300 connection TCP RMI 85 - 10.200.48.101 com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper - isRegistered DEBUG: DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo

2012-07-27 17:22:19.118-0300 connection TCP RMI 85 - 10.200.48.101 com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper - isRegistered DEBUG: DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo:DURATION = 0

2012-07-27 17:22:19.118-0300 connection TCP RMI 85 - 10.200.48.101 DEBUG com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper - unregisterMBean: DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo

2012-07-27 17:22:19.118-0300 connection TCP RMI 85 - 10.200.48.101 DEBUG com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper - unregisterMBean: DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo:DURATION = 0

2012-07-27 17:22:19.119-0300 connection TCP RMI 85 - 10.200.48.101 com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper - createMBean DEBUG: com.perfigo.wlan.jmx.admin.ServerInfo:DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo:CAS:type = MLet, name = casLoader

2012-07-27 17:22:19.119-0300 connection TCP RMI 85 - 10.200.48.101 com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper - createMBean DEBUG: com.perfigo.wlan.jmx.admin.ServerInfo:DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo:CAS:type = MLet, name = casLoader:DURATION = 0

2012-07-27 17:22:19.120 connection TCP RMI 85 - 10.200.48.101 DEBUG com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper --0300 call: DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo:init

2012-07-27 17:22:19.120 connection TCP RMI 85 - 10.200.48.101 DEBUG com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper --0300 call: DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo:init:DURATION = 0

2012-07-27 17:22:19.120 connection TCP RMI 85 - 10.200.48.101 DEBUG com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper --0300 call: DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo:isServerInSync

2012-07-27 17:22:19.120 connection TCP RMI 85 - 10.200.48.101 DEBUG com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper --0300 call: DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo:isServerInSync:DURATION = 0

2012-07-27 17:22:19.121-0300 connection TCP RMI 85 - 10.200.48.101 com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper - getAttribute DEBUG: DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo:CurrMgrEth0Ip

2012-07-27 17:22:19.121-0300 connection TCP RMI 85 - 10.200.48.101 com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper - getAttribute DEBUG: DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo:CurrMgrEth0Ip:DURATION = 0

2012-07-27 17:22:24.119-0300 connection TCP RMI 85 - 10.200.48.101 com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper - isRegistered DEBUG: DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo

2012-07-27 17:22:24.119-0300 connection TCP RMI 85 - 10.200.48.101 com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper - isRegistered DEBUG: DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo:DURATION = 0

2012-07-27 17:22:24.119-0300 connection TCP RMI 85 - 10.200.48.101 DEBUG com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper - unregisterMBean: DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo

2012-07-27 17:22:24.119-0300 connection TCP RMI 85 - 10.200.48.101 DEBUG com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper - unregisterMBean: DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo:DURATION = 0

2012-07-27 17:22:24.120-0300 connection TCP RMI 85 - 10.200.48.101 com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper - createMBean DEBUG: com.perfigo.wlan.jmx.admin.ServerInfo:DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo:CAS:type = MLet, name = casLoader

2012-07-27 17:22:24.120-0300 connection TCP RMI 85 - 10.200.48.101 com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper - createMBean DEBUG: com.perfigo.wlan.jmx.admin.ServerInfo:DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo:CAS:type = MLet, name = casLoader:DURATION = 0

2012-07-27 17:22:24.121 connection TCP RMI 85 - 10.200.48.101 DEBUG com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper --0300 call: DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo:init

2012-07-27 17:22:24.121 connection TCP RMI 85 - 10.200.48.101 DEBUG com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper --0300 call: DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo:init:DURATION = 0

2012-07-27 17:22:24.122 connection TCP RMI 85 - 10.200.48.101 DEBUG com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper --0300 call: DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo:isServerInSync

2012-07-27 17:22:24.122 connection TCP RMI 85 - 10.200.48.101 DEBUG com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper --0300 call: DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo:isServerInSync:DURATION = 0

2012-07-27 17:22:24.122-0300 connection TCP RMI 85 - 10.200.48.101 com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper - getAttribute DEBUG: DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo:CurrMgrEth0Ip

2012-07-27 17:22:24.122-0300 connection TCP RMI 85 - 10.200.48.101 com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper - getAttribute DEBUG: DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo:CurrMgrEth0Ip:DURATION = 0

2012-07-27 17:22:29.120-0300 connection TCP RMI 85 - 10.200.48.101 com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper - isRegistered DEBUG: DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo

2012-07-27 17:22:29.120-0300 connection TCP RMI 85 - 10.200.48.101 com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper - isRegistered DEBUG: DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo:DURATION = 0

2012-07-27 17:22:29.121-0300 connection TCP RMI 85 - 10.200.48.101 DEBUG com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper - unregisterMBean: DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo

2012-07-27 17:22:29.121-0300 connection TCP RMI 85 - 10.200.48.101 DEBUG com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper - unregisterMBean: DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo:DURATION = 0

2012-07-27 17:22:29.121-0300 connection TCP RMI 85 - 10.200.48.101 com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper - createMBean DEBUG: com.perfigo.wlan.jmx.admin.ServerInfo:DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo:CAS:type = MLet, name = casLoader

2012-07-27 17:22:29.121-0300 connection TCP RMI 85 - 10.200.48.101 com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper - createMBean DEBUG: com.perfigo.wlan.jmx.admin.ServerInfo:DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo:CAS:type = MLet, name = casLoader:DURATION = 0

2012-07-27 17:22:29.122 connection TCP RMI 85 - 10.200.48.101 DEBUG com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper --0300 call: DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo:init

2012-07-27 17:22:29.122 connection TCP RMI 85 - 10.200.48.101 DEBUG com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper --0300 call: DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo:init:DURATION = 0

2012-07-27 17:22:29.123 connection TCP RMI 85 - 10.200.48.101 DEBUG com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper --0300 call: DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo:isServerInSync

2012-07-27 17:22:29.123 connection TCP RMI 85 - 10.200.48.101 DEBUG com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper --0300 call: DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo:isServerInSync:DURATION = 0

2012-07-27 17:22:29.123-0300 connection TCP RMI 85 - 10.200.48.101 com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper - getAttribute DEBUG: DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo:CurrMgrEth0Ip

2012-07-27 17:22:29.123-0300 connection TCP RMI 85 - 10.200.48.101 com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper - getAttribute DEBUG: DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo:CurrMgrEth0Ip:DURATION = 0

[2012-07-27 17:22:32.022-0300 RMI Scheduler (0) DEBUG com.perfigo.wlan.ssl.SSLLog - RMISocketFactory: removed socket: 1871db1 [TLS_RSA_WITH_AES_128_CBC_SHA: Socket[addr=server_primary_ag/10.200.2.103,port=1099,localport=12312]]

2012-07-27 17:22:32.022-0300 com.perfigo.wlan.ssl.SSLLog RMI Scheduler (0) DEBUG - RMISocketFactory:CACHED_SOCKETS_SIZE = 2

[[2012-07-27 17:22:32.022-0300 RMI Scheduler (0) com.perfigo.wlan.ssl.SSLLog - RMISocketFactory:CACHED_SOCKETSE = DEBUG [1e7e7ac [TLS_RSA_WITH_AES_128_CBC_SHA: Socket[addr=/10.200.48.101,port=19660,localport=1099]], 59725 c [TLS_RSA_WITH_AES_128_CBC_SHA: Socket[addr=/10.200.2.103,port=12312,localport=1099]]]

[2012-07-27 17:22:32.022-0300 connection TCP RMI 86 - 10.200.2.103 DEBUG com.perfigo.wlan.ssl.SSLLog - RMISocketFactory: moved socket: 59725 c [TLS_RSA_WITH_AES_128_CBC_SHA: Socket[addr=/10.200.2.103,port=12312,localport=1099]]

2012-07-27 17:22:32.022-0300 TCP RMI 86 - 10.200.2.103 DEBUG com.perfigo.wlan.ssl.SSLLog - RMISocketFactory:CACHED_SOCKETS_SIZE = 1 connection

[2012-07-27 17:22:32.022-0300 connection TCP RMI 86 - 10.200.2.103 com.perfigo.wlan.ssl.SSLLog - RMISocketFactory:CACHED_SOCKETSE = DEBUG [1e7e7ac [TLS_RSA_WITH_AES_128_CBC_SHA: Socket[addr=/10.200.48.101,port=19660,localport=1099]]]

2012-07-27 17:22:32.022-0300 TCP RMI 86 - 10.200.2.103 DEBUG com.perfigo.wlan.ssl.SSLLog - RMISocketFactory:CACHED_SOCKETS_SIZE = 1 connection

[2012-07-27 17:22:32.022-0300 connection TCP RMI 86 - 10.200.2.103 com.perfigo.wlan.ssl.SSLLog - RMISocketFactory:CACHED_SOCKETSE = DEBUG [1e7e7ac [TLS_RSA_WITH_AES_128_CBC_SHA: Socket[addr=/10.200.48.101,port=19660,localport=1099]]]

2012-07-27 17:22:34.122-0300 connection TCP RMI 85 - 10.200.48.101 com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper - isRegistered DEBUG: DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo

2012-07-27 17:22:34.123-0300 connection TCP RMI 85 - 10.200.48.101 com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper - isRegistered DEBUG: DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo:DURATION = 1

2012-07-27 17:22:34.123-0300 connection TCP RMI 85 - 10.200.48.101 DEBUG com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper - unregisterMBean: DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo

2012-07-27 17:22:34.123-0300 connection TCP RMI 85 - 10.200.48.101 DEBUG com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper - unregisterMBean: DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo:DURATION = 0

2012-07-27 17:22:34.123-0300 connection TCP RMI 85 - 10.200.48.101 com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper - createMBean DEBUG: com.perfigo.wlan.jmx.admin.ServerInfo:DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo:CAS:type = MLet, name = casLoader

2012-07-27 17:22:34.123-0300 connection TCP RMI 85 - 10.200.48.101 com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper - createMBean DEBUG: com.perfigo.wlan.jmx.admin.ServerInfo:DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo:CAS:type = MLet, name = casLoader:DURATION = 0

2012-07-27 17:22:34.124 connection TCP RMI 85 - 10.200.48.101 DEBUG com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper --0300 call: DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo:init

2012-07-27 17:22:34.124 connection TCP RMI 85 - 10.200.48.101 DEBUG com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper --0300 call: DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo:init:DURATION = 0

2012-07-27 17:22:34.125 connection TCP RMI 85 - 10.200.48.101 DEBUG com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper --0300 call: DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo:isServerInSync

2012-07-27 17:22:34.125 connection TCP RMI 85 - 10.200.48.101 DEBUG com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper --0300 call: DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo:isServerInSync:DURATION = 0

2012-07-27 17:22:34.125-0300 connection TCP RMI 85 - 10.200.48.101 com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper - getAttribute DEBUG: DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo:CurrMgrEth0Ip

2012-07-27 17:22:34.125-0300 connection TCP RMI 85 - 10.200.48.101 com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper - getAttribute DEBUG: DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo:CurrMgrEth0Ip:DURATION = 0

[[email protected]/ * / _primary_ag ~] #.

Thank you

Moises,

I wanted to know if you have followed these steps:

http://www.Cisco.com/en/us/docs/security/NAC/appliance/configuration_guide/49/CAs/s_adsso.html#wp1266896

Thank you

Tarik Admani
* Please note the useful messages *.

What is "Error of Privoxy" Privoxy (oooooobo) fatal error: could not check the configuration file ':(error number 2) Config.Txt

What is "Error of Privoxy" Privoxy (oooooobo) fatal error: could not check the configuration file ':(error number 2) Config.Txt.

I always get this message in a long horizontal area on my desk top once I restart and turn on my computer.

Thank you

"Privoxy" is a 3rd party is no program not part of Windows XP. You can go to
Panel-> Add/Remove programs
and remove this program. If you still think that you need this program, try reinstalling it on Sourceforge
<>http://sourceforge.NET/projects/ijbswa >

HTH,
JW

"Couldn't administration tool load Essbase pilot. Please check the configuration.

Dear all,

We are facing problem in OBIEE administration tool while creating the new repository by selecting the data source as Essbase. And also, we shared the document that contains the steps made by us to solve this problem.

Question in the selection of Data Source as Essbase
While creating the new repository in the administration tool by selecting the data source such as Essbase, the following error occurs.
"Admintool cannot load driver Essbase. Please check the configuration.
Brief description of our environment
In our scenario, BI Server running under Linux and running in Windows administrative tool.
The work done in the Windows Machine (administration tool)
1. 1. set the Variable of environment PATH and ESSBASEPATH as 'C:\Oracle\Middleware\EPMSystem11R1\products\Essbase\EssbaseClient'
2. Adding information ESSBASE to bi - init.cmd
  1. File located in "C:\Program Files\Oracle Business Intelligence Enterprise Edition Plus customer Tools\oraclebi\orahome\bifoundation\server\bin"
  2. (b) define as 'C:\Oracle\Middleware\EPMSystem11R1\ products\Essbase\EssbaseClient' ESSBASEPATH
  3. c. set the path as %ESSBASEPATH%\bin;%PATH%
  4. Save and close the file.
The work done in Linux Server (BI)
1. Change the .bash_profile to export values of the variables in the path and ESSBASEPATH,
  1. a. export ESSBASEPATH = / app/oracle/poet/Oracle_BI1/clents/epm/Essbase/EssbaseRTC
  2. b. export PATH =: $ESSBASEPATH/bin
2. Adding information ESSBASE to bi - init.cmd
  1. a. file located to "/ app/oracle/poet/instances/instance1/bifoundation/OracleBIApplication/coreappplication/setup"
  2. Check the value of ESSBASEPATH and mentioned PATH as "/ app/oracle/poet/Oracle_BI1/clents/epm/Essbase/EssbaseRTC ' and: ${ESSBASEPATH} / bin respectively.
  3. If the value is inconsistent then to update the same as those mentioned above in the file (bi - init.cmd)
  4. Save and close the file.
3. Update information for ESSBASE in OPMN. XML file,
  1. a. file located in the "/ app/oracle/poet/instances/instance1/config/OPMN/opmn '
  2. Under the label "ias-component id" , find the line as
  3. c. < variable id = "ESSBASEPATH" value = "$ORACLE_HOME/customers/EMP/Essbase/EssbaseRTC" / >
  4. d. <variable id="PATH" value="$ORACLE_HOME/common/ODBC/Merant/7.0.1/lib$:$ORACLE_HOME/bifoundation/server/bin$:$ORACLE_HOME/bifoundation/web/bin$:$ORACLE_HOME/clients/epm/Essbase/EssbaseRTC/bin$:$ORACLE_HOME/bifoundation/odbc/lib$:$ORACLE_INSTANCE$:$ORACLE_HOME/lib$:$PATH$:$/bin" append="true"/>
  5. If the value is inconsistent then to update the same as those mentioned above in the file (opmn.xml)
  6. Save and close the file.
4. Restart OPMN
  1. Navigate to the following location
  2. b. "/ app/oracle/poet/instances/instance1/bin '.
  3. c. enter the command as . / opmnctl status/stopall/startall
But the issue has not been resolved and we expect your support and useful suggestions to overcome this problem.

Thank you and best regards,
SaiSC

Keep "simple" things, you have a 64-bit Windows, just install a client of Essbase 64-bit...

Go to delivery under the "Oracle Enterprise Performance Management System" product packaging, download only the 'EPM system release 11.X.X.X.0 Client Installers' and there inside, you have the Essbase client (it's a bit silly that you need to download a file of 2 GB for just the small Essbase client, but this is the best place I found to always get a good record). Install it, then point the mailed earlier to the right path environment variable.

I did and it worked by himself in all my Windows 64-bit.

Use of the 32-bit clients on 64 bit OS what you always end with questions because of the default path pointing 64-bit slots and so things are missing or you have a mix of 64 and 32-bit.

(I guess that's not important if you choose 11.1.2.4, 11.1.2.2 or 11.1.2.3, they work I would say, but if I'm not mistaken the Essbase installed by OBIEE is more 11.1.2.2...) For you, it isn't. (2.4)

Error: Ship to / Bill to address is invalid. Please check the configuration of the address
After the upgrade to 12.1.3, commands fail during the import/Scheduling with "error: ship to / Bill to address is invalid.". Please check the configuration of the address"every time the tax engine is called. And this is the case for only specific addresses (which are valid). I'd appreciate any suggestion/experience on this topic.

Thank you
Mariefrance
Hello

There were multiple causes for the same problem, namely:
(1) no valid address according to the Vertex - resolution here would be to find the name of the alias of the city for the Zip code (Google, zip - codes.com, etc.) and use it. You should see the result immediately.

(2) Texas or Forida addresses where there is no link - often we see that there are multiple records in vertex for the city, and it generates an error. Here the safest option is to perform the encryption of the geography of vertices for these combinations and then update the same in Oracle as the substitution of GeographyCode (default value = "77000000") to remove vertex call. Alternatively, we can create a type AR Txn with the Classification of taxes as 'No' and then linking to a new order Type. Any order with this type of order will not call vertex.

(3) military addresses - resolution is the same as 2 above.

Mariefrance

Cannot run command - drive did not come online. check the configuration/hardw
I have a Scalar i500 on a Linux host attached via fibre channel. I accept all work to automatically mount the drive. I can't make it work.

I can use the web interface of the i500 and then put a tape in the drive. I can then mount the drive from a secure backup and mount a back very well. Yet, I can not run a backup without a mounted tape. If I choose "load Volume (by car)...." I get the error ' cannot run the command - drive did not come online; check the configuration/hardware.

I can the inventory of the library and do anything except automount readers. I run an audit and configuration back with no errors. I tried to use the SCSI settings in the obl0 and obt0 and obt2 without success. I tried to use the/dev/sg raw without success paths. Same mistake.

It is an upgrade from 10.1 to 10.3 installation. I tried to do a clean install with the same question. I've restored the installation and then run an upgrade with the same question.

I'm stuck. Please help :)

Thank you
It seems you have the DTE is exchanged.

Swap the DTE # assigned to objects device disk and try again. This could happen during an upgrade if you reassigned the scsi settings and features obt0 and obt1 swapped the scsi settings when they ran the last things.

the stubborn standby redo log
I have a dowstreams that has four groups of log roll forward pending. one of these groups is always in a redo of the day 23/04/2010. This former roll forward is not filed, always there.
This implies that the endorsements of the database are working with three groups of redo log and some oacaciones all that is in the active State and at this time that the view v $ archived_dest returns the error for that destination (natural).

the question is:

How can I eliminate this newspaper waiting for redo which is more archived.

Thank you very much for your attention
You have error messages in the alert log?

See this Metalink Note:
Alert.log watch no. standby redo Logfiles of size 153600 available blocks [405836.1 ID]

How to replace the members of the Group missing redo log after the failure of a support

Hello
I'm testing a disk failure scenario. I had recovery multiplexes on three sites (Windows drive letters) logs; one of the three locations also contained the data files. I deleted the Windows player that contained data files and saw a restoring with RMAN. All is well except that redo log members who are found on the occult Windows disk are of course still missing; the database opens, etc., but puts messages like this in the ALERT.log:
ORA-00321: log thread 2 1, cannot update log file header
ORA-00312: wire 2 1 online journal: ' F:\APP\NGORA12CR2SRV\ORADATA\ORATEST5\ONLINELOG\O1_MF_2_BW4B5MY0_. JOURNAL"

What is the 'right' way to replace missing limbs? Just get all the new groups of newspapers with new members on all three discs? Carefully copy the LOG files representing missing members of one of the other sites? I add new members at this location and remove existing members (missing)?

Is how important it?

Thank you!

Martin

See 'Recover after losing a member of a group of Redo Logs online multiplexed'

at http://docs.oracle.com/cd/E11882_01/backup.112/e10642/osadvsce.htm#sthref2205

Hemant K Collette

How can I check the configuration on a PowerEdge T310 raid

Please how to check raid on a Dell PowerEdge T310 server configuration without restarting?

By using the software OpenManage Server Administrator - under storage, Controller/PERC, virtual disks. What operating system do you use?

You might also be able to deduce the configuration view of your RAID controller (must be under SCSI/RAID controllers in Device Manager), knowing the number of physical disks installed and knowing the number and size of "disks" that Windows is currently using in storage management.

Check the configuration of time synchronization in ESX 4.1 for Windows domain

Hello
Sorry if this topic will cover many, but browsing the forums I found some conflicting info and thought that it easier to ask you if I had it correct.
I'm ready to virtualize our Active Directory environment and put all our virtual machines RODCs. We have an environment with 8 ESX hosts and vCenter 4.1. Most VMs are Windows member servers, but also several RHEL servers and a few non-domaine joined Windows servers. We have also two domain controllers that are already virtual machines. I'm down to the last physical domain controller which is our role PDC FSMO server so the Master Timekeeper.
That's how I was going to change our Setup for the services of time with all being virtual domain controllers.
1. the virtual FSMO PDC of our clocks of field it is time via w32tm to an external time such as us.pool.ntp.org source. That's the only DC with an external time source.
2. all the domain joined machines Windows, whether virtual or physical (servers and clients OS) get their time via the domain controllers. PDC-> all the other DCs-> clients and member servers. On VMS, we do not use VMTools do a time synchronization. Throughout the normal Windows AD process.
3. all ESX hosts serve time source external PDC, described above.
4. all the non-domaine attached (Windows or Linux) machines that are virtual machines get their time synchronization via the VMTools Sync feature.
Have I not my correct thought and not its ok to ensure synchronization of time between the field in a virtualized ad environment?
Thanks in advance,
HR

That sounds about right, and I've implemented almost identical to this designs. The key is, as you say, do not sync using the time host via VMware Tools, in particular on the role of the PDCe.

I also usually use this method to ensure that the PDC (role 5) is the only way to an external time source:

http://blogs.technet.com/b/askds/archive/2008/11/13/configuring-an-authoritative-time-server-with-group-policy-using-WMI-filtering.aspx

Check the configuration of my management network please?

I'm working on the settings described in this article of yellow brick, but I don't know that I was right;
http://www.yellow-bricks.com/2011/03/22/ESXi-management-network-resiliency/
I have two vmnic added to vswitch0, vmnic0, and vmnic10.
I have this vswitch groups of two ports, one for vmk1 vmotion and the other for management vmk0.
Tab grouping the vmotion port group NIC I specify vmnic10 as an active adapter and vmnic0 as before with backspace set to no.
On the NIC teaming tab management port network group I do the opposite, vmnic10 is in standby and vmnic0 is active, but with BACKSPACE value again.
Is it OK so far?
What I am ultimately confused by vswitch NIC teaming tab configuration is two adapters program active since they are each active for a group of different ports this vswitch? and should restore the value not in this tab as well?
Thanks for any help you can provide.

The first thing I noticed: you use the same subnet for your management and vmotion traffic.

Use VLANs and put on separate segments (vMotion traffic is not encryted).

Kind regards

Mario

How to check the configuration of flow?
Hi guys,.

I have 2 servers oracle, both are 11g, server_1 data sync for server_2, I don't know what mechanism is used to achieve this synchronization Stream, may be possible to verify it is common or not? you know, maybe some views of dictionary, or others.

Thank you very much.
Hello
OEM Java based client that ships with Oracle 9i or oracle 10g client can show you if the streams replication is configured. If you have the OEM or OEM database control, tab 'data movement' has a 'flow' section which will also tell you if the streams replication is configured. Mark the following tables will also help you find it.
```
USCOFMS.US.ORACLE.COM$SYS> select table_name from dictionary where table_name like '%STREAM%';

TABLE_NAME
------------------------------
ALL_STREAMS_GLOBAL_RULES
ALL_STREAMS_SCHEMA_RULES
ALL_STREAMS_TABLE_RULES
DBA_STREAMS_GLOBAL_RULES
DBA_STREAMS_SCHEMA_RULES
DBA_STREAMS_TABLE_RULES
GV$STREAMS_APPLY_COORDINATOR
GV$STREAMS_APPLY_READER
GV$STREAMS_APPLY_SERVER
GV$STREAMS_CAPTURE
V$STREAMS_APPLY_COORDINATOR
V$STREAMS_APPLY_READER
V$STREAMS_APPLY_SERVER
V$STREAMS_CAPTURE
```
Salman

Check the configuration of Audit DB track
In our production environment, we have configured the DB to audit changes made to the database audit trail, using the following statement:

AUDIT, INSERT, UPDATE, DELETE
ON sys.aud$
BY ACCESS;

In our Sarbanes-Oxley controls, we must verify that this configuration has not changed. Where and how I see only this setting is always enabled?
The audit trail is stored in the SYS. AUD $ table. Its contents can be accessed directly or via the following views:

* DBA_AUDIT_EXISTS
* DBA_AUDIT_OBJECT
* DBA_AUDIT_SESSION
* DBA_AUDIT_STATEMENT
* DBA_AUDIT_TRAIL
* DBA_OBJ_AUDIT_OPTS
* DBA_PRIV_AUDIT_OPTS
* DBA_STMT_AUDIT_OPTS

error in the extension of redo logs
Dear friends,

I just tried a few measures to extend some redologs and it worked.

Applied to a different database and problems.

Please guide me.

alter database drop logfile Group 1;

change the database
Add logfile group 1 ('F:\DEV\REDO01.) LOG ') SIZE 20 M;

error: ORA-00301: Error adding the log file ' F:\DEV\REDO01. NEWSPAPER "-could not create the file"
ORA-27038: created file already exists
OSD-04010: < create > option specified, the file already exists

But the first line was a success.

Please help me.

Nith
alter database add logfile group 1 ('F:\DEV\REDO01.) LOG ') SIZE 20 M REUSE;

Redo Log in Oracle RAC 11G

Hello
I work with oracle RAC 11gr2.0.3.
We have an expectation to top event 'parallel log file reading', and other types of waiting as 'log sequential read', 'log file sync '...
When I check the size of redo log = 50 M, while in the old database oracle 10 g 2 (no CARS), the size of redo log = 150 M.
So, I want to know if I should increase our redo log in our Oracle RAC database, or not?
Should be again small use connect oracle RAC, oracle RAC without difference?
Thank you for your help.

No matter the size, it is recommended to use at least 3 groups of newspapers by thread. This is particularly important if the archive log mode is activated.

See you soon,.

Brian

Check the configuration of Redo Log Archives to

Similar Questions

Maybe you are looking for