Cannot run command - drive did not come online. check the configuration/hardw

Similar Questions

• my printer did not come with all the cables needed to connect to my computer

  I just got a PIXMA ip2820 and he came with all the cables needed to connect to my pc or is it wireliss and if so how I managed to connect wireless

  Hello.

  Our printers do not come with USB cables.  If you do not have a cable connected to a previous printer, you can buy any B USB standard cable locally has to establish the connection.  It is a pretty common cable located at most major retailers office supply or electronics.

  The iP2820 can only be used with a USB connection.  It doesn't have wireless capabilities.

  It has not responded to your question or problem? Find more help contact us.

• Init DirectDraw(), screen buffer to create Surface() - cannot create a DirectDraw Surface. Hardware closing - DDERR_NODIRECTDRAWHW - one game only DirectDraw object creation was attempted, but the driver did not support any hardware.

  Nancy Drew games - get this error message: Init DirectDraw(), screen buffer to create Surface() - cannot create a DirectDraw Surface. Hardware closing - DDERR_NODIRECTDRAWHW - one game only DirectDraw object creation was attempted, but the driver did not support any hardware.

  Any suggestions?

  Hi gkfuller,

  Have you followed the steps that I recommended above? If this isn't the case, please do and check the result.

  Step 1: Remove the game completely:

  If the above steps do not work, uninstall and reinstall the game should solve this problem.

  How to change or remove a program in Windows XP

  After you have uninstalled the game, check that all the game files have been removed from your computer. The remaining game files will be in one of the following locations (depending on the title of the game and your operating system):

  C:\Nancy drew
  C:\Program Files\Nancy Drew
  For XP: Folder 'My Documents' (C:\Documents and Settings\nom_utilisateur\Mes Documents)

  For more details, see: Impossible to uninstall using Add/Remove Programs

  Step 2: Reinstall the game

   

  To install the game manually, see the steps in the article below.

  http://www.herinteractive.com/CMS/FAQ/install-does-not-start-when-i-put-my-disc

  Kind regards

  Shinmila H - Microsoft Support

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Sony Vaio did not come with recovery cd and have not been able to locate the online game

  I have a Sony Vaio, which has a few years working with Windows XP Home Edition.  When I bought the computer first, I wasn't very experienced technilogically who did not think about twice the computer comes not not with an operating system cd.  In any case, now that the computer is a few years old I am aware of the importance of having this cd as a backup, if all else fails.  My problem is when I went on the Sony website where a list of retailers has been provided which might carry the recovery CD.  After phone calls and emails, I have yet to find one that still bears then Sony Vaio Recovery Set.  I always have my genuine key of Windows Xp, as well as of the receipt of the purchase of the computer.  I'm more concerned with a new installation or not all original came with my computer (ie. sony) programs.  My concern is just to find a real cd that I can use in the unfortunate situation where I have to reinstall my operating system.  Any help would be greatly appreciated.  Thank you for your time.

  Maybe you have a recovery partition.

  Pressing F10 or F11 key when you turn on your system can put you in a recovery partition.

  TaurArian [MVP] 2005-2011 - Update Services

• Dual Boot with windows XP Pro with 2 HARD drive, error on secondary windows install: "Windows did not start because of a configuration of the disk of the computer problem. Could not read the selected boot disk. Check boot path and disk hardware... »

  Hi, I recently bought a new Hitachi 1 TB internal hard drive. I wanted to do a clean install on the new drive (d), be able to dual boot my computer and leave my old 300 GB disk (C :) as the primary windows installation. After physically installing the new HARD drive, I noticed that "new hardware found" and the the brand name flashed in the bottom right corner. I thought I'd see the new hard drive in my computer, but I did not. I initialized the new HARD drive with the computer management window (right click on my computer - manage) and I also formatted in NTFS (I had to change my printer hard drive letter to assign the new HARD drive with the letter D, but I've made other changes after this step). Now, I could see and use in my main windows on the C: installation. I then installed a windows new copy XP pro with the installation CD I got for my C: but on the D: (Note: I have a Dell computer (and the Dell reinstallation CD) and my current version of windows has SP3 while the installation CD is only SP2) (I also reformatted my HARD drive during the installation of windows to NTFS)

  Now when I try to start on installing the new on my D: I get "Windows did not start because of a configuration of the disk of the computer problem. Could not read the selected boot disk. Check startup disk and hardware access path. "and another line saying to refer to manuals HARD drive and windows.

  My Boot.ini file at this time was:

  [boot loader]
  Timeout = 5
  default = multi (0) disk (0) rdisk (0) partition (2) \WINDOWS
  [operating systems]
  "multi (0) disk (0) rdisk (0) partition (2) \WINDOWS="Microsoft Windows XP Professional "/ noexecute = optin/fastdetect
  "signature (ac516a5c) disk (0) rdisk (0) partition (1) \WINDOWS="Microsoft Windows XP Professional own "/ noexecute = optin/fastdetect

  I looked towards the top of this help page, but for now I'm unlucky:

  http://support.Microsoft.com/kb/314477

  (The next steps I took by throwing from the Windows CD and go into the repair console)

  I tried to use the bootcfg /rebuild but the line to boot.ini for my secondary HARD drive still does not work.

  He gave me something like:

  [boot loader]
  Timeout = 5
  default = multi (0) disk (0) rdisk (0) partition (2) \WINDOWS
  [operating systems]
  "multi (0) disk (0) rdisk (0) partition (2) \WINDOWS="Microsoft Windows XP Professional "/ noexecute = optin/fastdetect
  "signature (ac516a5c) disk (0) rdisk (1) partition (1) \WINDOWS="Microsoft Windows XP Professional own "/ noexecute = optin/fastdetect

  I also tried to change the signature() to multi (0), but it did not work. (or try almost all possible permutations of disk() and rdisk() partition() 0 to 2).

  I also tried to use expand F(dvd-drive):\i386\ntkrnlmp(I_have_a_duo-core).ex_ D:\windows\system32\ntoskrnl.exe and a few other combinations, but I when I login as D:\windows simply, it fails to extend with a message like "could not develop" or C:\windows I get "restricted access".

  I have not yet tried CHKDSK/r, but since I did a clean install on a newly formatted drive... I don't think it would work.

  I've also marked the partition on the D: as active (in computer management), but it did not help me.

  I've done a first installation of windows repair, strangely, I couldn't fix this one... Still does not work...

  My default windows installation yet works very well & I see that windows has been installed on the D: but I'm ideas from how to operate the dual-boot, can someone throw me a BONE on what to do?

  Maybe try to do something with the Boot Manager (whatever it is?) Create a new partition and use it as a boot manager? I don't really want to do this, because if I made a mistake I will be unable to use my computer and dual boot should work without going through all this trouble... But I found this page: http://technet.microsoft.com/fr-fr/library/ee829686%28WS.10%29.aspx

  Could a clean install two HDD help? I hope I won't have to do...

  Someone has an idea?

  PS: I'm not such an advanced user so I need a solution step by step, thanks!

  Edit: I also noted that I can't see my new HARD drive in my BIOS... weird... SATA-0 is my old drive HARD 1 and 2 are my dvd 3-5 readers are 'off' and it doesn't seem to be anything that it is plugged in. I also have 4 bays for internal HARD disks. Now, 2 are busy.

  Edit2: I looked inside my case and enabled the good Sata in the Bios after a reboot it detected the drive correctly. Dual boot doesn't always work well... The fact that it was disable in the BIOS while I was installing the new HARD drive could change anything? Hmm...

  In case I wasn't clear enough: I had a windows XP Pro installed on my C:, bought a new hard drive and installed the same copy of windows on it (d). I think that should allow me to double boot between the two installs different. Even if for some reason I can't boot from one on my D:. Andrew, I do not understand why you so far physically disconnect the other drive, the point of the whole operation is to build a boot.ini file so that the BIOS knows that it y facilities 2 windows and you allow to choose (and not have conflicting problems between the 2 systems), someone correct me if I'm wrong? "Expand" the part of my first post made reference to one of the solutions provided by Microsoft in the first link that I have included in my previous post (but I can't seem to work).

  In addition, it is the procedure that I followed: http://www.ehow.com/how_5950826_boot-two-different-hard-drives.html

  (except I've had the first installation already done).

  Andrew "also, once a new hd is plugged on the pc & running, most of the BIOS will place (them) as 1st priority hd, set the BIOS to do this", you mean that by installing separately from windows on each unit when the other is not plugged in, I could choose what disk to start from defining their priority in the BIOS once they are all plugged back? It's too tedious (as I intend to move frequently between the 2 installs) and requires a computer to other users of the lack of computer knowledge. Unfortunately, it is not a viable option.

  EDIT: I DID IT! Hmmm... Well, I double checked in the recovery console, the path of the new HARD drive with the arc command Scan. Tried to start again with the MULTI (0) in my boot.ini and it worked... I also had my windows install CD in. Maybe that is why I could not start, windows needs the CD to complete the installation? Weird, I don't know what I did to the difficulty it... but hey, it works! Thanks for your ideas guys!

• Blocks - Spooler subsystem or the display driver did not work properly

  I have a Vista Home Premium OS. He crashes at least once a day and the State of boxes (approximately equal amounts) dialogue that the Spooler subsystem or the display driver did not work properly and that have been closed by the enforcement data system. Can you give me advice on how to fix these problems?

  Hello

  1 when was the last time, he did not work properly?

  2. the accident happens at random or when executing a particular task?

  3 did you a recent software or changes to the material on the computer?

  Method 1:

  I suggest you to go through the steps mentioned in the link and the Coachman. Run the automated FIXIT and check. You can also follow the other steps listed in the article.

  Solve printer problems

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-printer-problems

  Check if the problem persists, if she does not follow the steps in method 2:

  Method 2:

  This problem may occur if a third-party printer driver or service affects the functionality of a newly installed printer.

  I also suggest you to follow the steps mentioned in the link and check.

  Do not operate the automated FIXIT. Follow the manual steps and check.

  You cannot print and you receive the error message "Spooler subsystem app has encountered a problem and needs to close."

  http://support.Microsoft.com/kb/810894/en-us

  (Also applies to Windows Vista)

  Method 3:

  You can also update the display drivers on the manufacturer's Web site or use the link below.

  Updated a hardware driver that is not working properly

  http://Windows.Microsoft.com/en-us/Windows-Vista/update-a-driver-for-hardware-that-isn ' t-work correctly

  See also:

  Pick up the pieces after a computer crash

  http://Windows.Microsoft.com/en-us/Windows-Vista/picking-up-the-pieces-after-a-computer-crash

  Hope this helps and keep us informed if you need help.

• How to "Windows did not start because of a configuration of the disk of the computer problem. Could not read the selected startup disk... "on a netbook without a CD/disk drive?

  I did a lot of research and unfortunately havnt found a road toward the front of the detroit to a fix. Long story short... I installed Jolicloud as a dual boot with windows xp on netbook gateway of my wife. This netbook has no cd/dvd drive. Jolicloud wanted to screw up the startup option to not allow me to boot into windows, going Strait to jolicloud without option of windows. I tried to change it via the "menu.lst" and Grub.cfg file (I think) the only value I changed was I think 'boot... ". ' value between 1 and 2. When I restarted, then finally got a startup list (although I don't think that my modification of the value gave me the list, I had already installed manually "Grub" via the cmd prompt. I should have just restarted from there without changing anything else... because when I chose 'windows xp' in the start menu... He gave me a black screen and kept going back to the start menu. Then, I tried the "Vista loader" option... hoping that it would some how solve my problem... He asked me if I wanted to run a repair any. I agree with him and when he finished he told me that there is no enough space on the hard disk to copy the files (or something like that) then it froze kind of there. I had to do a hard reboot after that that it froze, then I got the code "Windows did not start because of a computer disk configuration problem. Could not read from the selected boot disk.  check the hardware path and startup disk, please check the windows documentation about hardware disk configuration and your hardware for more information reference manuals.

  Again, I have no drive cd/dvd on a netbook... IM assuming that im going to have to return a key USB with windows boot info to load the Manu F2 at startup... But I do not know... Help, please. Thank you

  Hello

  Follow method 1 and 4 in the article below and check if that helps resolve the issue.
  Error message: "Windows did not start because of a configuration of the disk of the computer problem.
  http://support.Microsoft.com/kb/314477/en-us

  I hope this helps.

• After upgrade from 5.1 to 5.5 ESXi will not come online

  After that I did an upgrade via line-update in the CLI, everything went well. No errors were displayed and they advised me to restart the system. I reboot the system, but the server does not come online again. What is the best practice to deal with a problem like this. Manual inspection, repair to 5.1?

  When you say its just not online? you are referring to his starting not not or its doesn't connect to the network. ?

  Thank you
  Avinash

• DB did not come with crs after the node is restarted

  Version of the grid: 11.2.0.3

  OS: Red Hat Enterprise Linux 5.6

  Our two RAC nodes node2 has restarted. At the restart, CRS and ASM instance came. But BP did not come.

  How can I check if DB is related to the CRS start?

  How can I activate the DB startup when starting CRS?

  You can use srvctl command Add the database in order to start automatically. read the link below.

  Utility server control reference

• Bookmarks synchronized to the new computer but miniature icons did not come along.

  I have synced my bookmarks to a new computer, but the little miniature icons identify did not come along. So now, there is just a generic blank next to each box until I click on the bookmark, to whom it point refreshes with the appropriate icon. Is it possible to get them all to update without having to visit each site? Thank you very much.

  Try using this addon here. It refreshes the favicon (the small identify the miniature icons) by using your bookmarks.

  Response if it did not help.

• Why my xbr75x850c did not come with 3d glasses?

  My new XBR75X850C did not come with 3D glasses. Is this typical? Any suggestions on the best lenses for this TV and where to buy?

  Yes, the X850C does not comes with glasses.

  Sony advises Sony TDG-BT400A or the Sony TDG-BT500A that are exactly the same.

  I also tried the folling glasses and they worked for me:
  Samsung SSG - 5150GB
  Samsung SSG - 3100GB
  Panasonic TY-ER3D4MU

• My computer did not come with a Windows XP restore disk

  My computer did not come with a restore Windows XP disc and I don't know how to get one, because my computer keeps restarting itself and that goes, "your computer must was closed incorrectly, or because of a power failure" and he gives me 3 options of safe mode and then gives me the opportunity to go to windows normally... but all the options I chose... It keeps just restarting on me... My computer did not come with a restore disc and Idk anyone who owns one... then where would I go to get one?

  Some computers have a built-in hard disk recovery partition.  Search for information on this subject on the BIOS screen that appears the first thing when the computer starts.  By pressing Ctrl + F11, accesses a recovery on some Dells partition.

  Otherwise, contact the computer manufacturer and ask if they can provide a restore disc.

• I connected a VGA cable and clicked on the option monitor, he did not come on my t v

  VGA?

  I connected a VGA cable and clicked on the option monitor, he did not come on my t, v and the screen is black when I plug cable in the future. How can I get the possibility to save change?

  Perhaps the following links will propose a few ideas:

  How to connect my computer to a TV
  http://hookpctotv.com/

  How to connect your PC to your TV
  http://en.kioskea.NET/FAQ/Sujet-228-how-to-connect-your-PC-to-your-TV-set

  PC to TV cables and adapters
  http://www.SVIDEO.com/PC2TV.html

  Windows Vista-
  Connect your computer to a TV
  http://Windows.Microsoft.com/en-us/Windows-Vista/connect-your-computer-to-a-TV

  Windows Vista-
  HDTV: Frequently asked questions
  http://Windows.Microsoft.com/en-us/Windows-Vista/HDTV-frequently-asked-questions

  Windows Vista-
  From PC to TV, part 1
  Digital media stream to any room with Windows Media Center and Xbox 360
  http://Windows.Microsoft.com/en-us/Windows-Vista/from-PC-to-TV-part-1-stream-digital-media-to-any-room-with-Windows-Media-Center-and-an-Xbox-360

• My laptop did not come with Media Player 12.

  I have a HP Pavilion DM1 and it did not come with Windows Media Player 12. Or any other media thing. He is nowhere to be seen. I tried to get a download link.

  I tried clicking on the download link for Windows K and KN, but it came up saying: "this update is not applicable to your computer. Windows Media Player 11 did nothing. Please help me. And please don't tell me to download other software media. Thank you.

  Hello JoeHopewell,

  See if you have enabled the Windows Media Player.
  1. go to start and in the search type "Turn Windows willing or not.
  2. click on "Turn Windows features on or off".
  3. find the multimedia functions and check the brand in the face of Windows Media Player.
  4 restart the computer

  You can also check to see if you have enabled Windows Media Center as well.

  Now, go to start, all programs. You must have Windows Media Player in the list of programs.

  Please let me know if it helps.

  Sincerely,

  Marilyn

• upgrade photoshop but my presets did not come with

  I recently updated my photoshop but my presets did not come with

  You should be able to migrate your old presets using the Edit > Presets > migrate pre-defined parameters.