Check the status of the user Opt-In for the newsletter

Similar Questions

• App without head: how to check the status

  1. I read this on the BB site:

  Criticism	Process that must be running at all times (for example, system processes)
  In the foreground	Processes that are running in the foreground
  Background	Processes that run in the background
  Stop	Process involved in RAM without running

  The question is can we write the code to check the States of the app to trigger certain activities?

  I also want to know the other possible States of the life cycle such as: "application started", "closed app"...

  A problem critical of the app without head is memory management, and we can only until BB have a better explanation on the life cycle of the app without a head.

  2. for an application in the short-term, event after 20 years, the app is still listed on memory and CPU usage. That seems abnormal, because I guess that after 20 years, the application will be stopped and not be able to use the memory and CPU more.

  Can someone explain?

  Thank you very much!

  Would you like to take a look at this app, I wrote that has a component without head and uses QLocalSocket to communicate between the headless and the (https://github.com/blackberry/Cascades-Community-Samples/tree/master/wakemebybeacon) user interface process. There is also a blog explaining how it works here: http://devblog.blackberry.com/2014/07/wake-my-beacon/.

  You can detect changes in status of process on the part without head like this (https://github.com/blackberry/Cascades-Community-Samples/blob/master/wakemebybeacon/WakeMeByBeaconSe...) and manipulate them like this (https://github.com/blackberry/Cascades-Community-Samples/blob/master/wakemebybeacon/WakeMeByBeaconSe...).

  When a component without a head (process) is distributed will be passable for 20 seconds, after which it is moved to a queue where it receives no processor, but can be awakened (marked as executable) of certain classes of events. While stopped the headless process always retains a memory footprint, but is not available.

• Check the status of the Table views

  Hi all
  
  I would like to check the status of the Oracle Table and the view that the procedure we had on the another db and we trying to replicate that after the passage of Oracle g10.
  There probably too much sence at all for Oracle, but I can't say that as a new user, I'm sure that wilwl RAISE exception if something goes wrong, but still, we are then. Too much heritage, etc...
  These points of view in question created every day with a lot of logic, that is why we do that (I think).
  What would be the path of the right way to do it? I can surely do SO (SELECT COUNT (*)... > 0) THEN OK, as we expect those table alwayse be filled with something, but is there a way to check how healthy all elect, constraints, etc...
  These VIEWS are quite large, almost 500 K lines.
  
  Is there any CHECK in Oracle, as in some other languages/platforms.
  
  
  Thank you for your comments, probably I'll get armed good enough to convince someone don't do it-)
  
  
  Best
  Trent

  SQL> select status, count(*) from dba_tables group by status order by 1;
  
  STATUS        COUNT(*)
  -------- ----------
  VALID            2834
  

  The same can be done for the INDEX.

  Please trust Oracle in order to maintain the integrity of the data.

• How to check the status of Oracle DB Windows batch file

  Hello
  
  I need a script that can be used to check the status of orders of windows batch file Oracle database.
  
  Thank you
  
  Kishore

  REM - beginning of batch file
  off @echo
  Set ORACLE_SID = %1
  (
  echo connect user/password@%1
  ECHO has put cmdsep on
  ' set cmdsep echo ' ' '; --"
  echo term on
  echo select status from v$ instance;
  ) | sqlplus/nolog
  REM - end batch file

  Please read [Forums label / Reward Points | http://forums.oracle.com/forums/ann.jspa?annID=718]

  Kind regards.

• How to follow the direction of Adobe 'Flash uninstall"to check the Firefox browser for the 'status' of Adobe Flash? --

  I downloaded Adobe uninstall (for Mac, OS x 10.4ff) and he ran to get rid of old shards of Adobe Flash, be very careful to follow the Adobe provided through their Web site. The last thing they ask you to do is to "Check that the uninstall is complete", by restarting your computer and then open your browser and check the status of the Flash Player. BUT it seems not to be a way to check the State of Adobe Flash Player on current versions of browsers Mozilla product.
  How can I check that the old version of 'Flash Player' is really gone?

  Firefox 41.0.2 on Mac OS X 10.8.5

  edited by e-mail from the public and robots to spammers

  See also the "tools > Modules > Plugins" (topic: addons) page and all: plugins page.

• Is there a way to check the status of the battery on an iPad 4gen?

  Is there a way to check the status of the battery on my iPad 4gen?

  Make a booking Genius Bar at your local Apple store and they can run a free diagnostic on the iPad that will determine the State of the battery.

  You will need for your Apple ID to make the reservation:

  http://www.Apple.com/retail/Geniusbar/

• Checking the status of the main sequence in reminder PostUUT

  I'm checking the State of the main sequence in the PostUUT callback, running TS 2014 SP1.
  Say, the main sequence generates an error. PostUUT I check and get the following

  Parameters.Result.Status "error".
  Parameters.Result.Error.Code

  Parameters.Result.Error.Msg

  Parameters.Result.Error.Occurred False

  Parameters.Result.Error.Occurred should not be set to True? If this isn't the case, please explain why.

  Thank you.

  In the process model of the step that calls the MainSequence reminder is set to ignore errors.  It is for the rest of your group of main step can run.  That is why we only sets result false but retains all the error information.

  If it were me, I would trigger on the State channel.

  Hope this helps,

• Checking the status of communication with NI DAQmx or NI6143

  Hello world
   
  I'm working on checking the status of communication with NI DAQmx or NI6143 in Microsoft Visual Studio 6.0 C++ on Windows XP. The communication situation is checked between the DLL and the NOR-DAQmx/NI6143. I wonder what is the command for the control of communication for NI DAQmx or NI6143, and if there is no code available. Any suggestion or advice is greatly appreciated.

  Thanks in advance.

  There are many examples available on your computer that install with NI DAQmx. For examples in C/C++, follow the steps listed in this white paper:

  http://www.NI.com/white-paper/6999/en

  If you are new to data acquisition, that I suggest using LabVIEW. LabVIEW has several examples to begin to use a data acquisition equipment. To find them, open LabVIEW and select help > find examples... > Input and Output material > DAQmx.

  As a note of clarification, NI DAQmx is the driver used to communicate with your device (NI 6143). You do not communicate with OR-DAQmx itself, but use it to send commands and receive data from your device.

  Cameron T

• Nvy HP 4500: check the status of printing etc.

  How can I check the status of print, for example what are print jobs in the queue?

  Thanks for letting me know who helped @hbf1842.

  Have a wonderful day!

  Think about scoring the Message post that solved the problem like "Accept as Solution" so that someone else in the community of HP who can meet the same or similar problem will know what to do.

  Thank you.

• Windows Server 2008, the server process could not be started because the configured identity is incorrect. Check the user name and password.

  When I started and connect to the windows 2008 Server and when trying to open any folder I get the below error message:

  The server process could not be started because the configured identity is incorrect. Check the user name and password.

  Please give me your entries for this problem.

  Kind regards

  Shankar Kale
  

  Hi Shankar,

  The question you posted would be better suited in the TechNet Forums. See the link.
  http://social.technet.Microsoft.com/forums/en-us/winservergen/threads

  Hope this information helps.

• "This is no longer in c:\users\... Check the location of the itme "error when I transfer my music

  Please, can you help me. I am trying to transfer my music from my file to my USB stick but he always error apears writes that no longer located in c:\users\... Check the location of the item and try again.   At the top of it, my usb device does not work, when I plug it into my lap top... it wants to format usb but I already formated it befor

  It's two separate problems.  Us; LL try to address each.

  For USB, is there a reason you cannot format (is there any data on this subject, you don't want to lose)?  Maybe you can copy the data to a temporary folder on your PC and let the format of the USB system, even if it is already formatted.  I hope that this will be a thing of the time and does not ask you to format whenever paste you it into the machine (then we will need to verify your system files for corruption or check the USB for corruption).

  For music files, C:\Users\\Music visit and see what's there.  Can you double-click on a song and play?  If so, select the songs you want to copy and right click and click on copy.  Then move to the USB drive and right click and select Paste.  If she do not copy files, but they will play then I'll be very confusing because it is obviously able to see them.  Let me know.

  If you still cannot copy and paste the music, then we will check some of your system files:

  Go to start / all programs / accessories / command prompt and right click on command prompt, and then click Run as administrator.

  Type sfc/scannow, go and let it run.  It will scan and try to correct some of your system files.  If all goes well he comes complete with no corruption, it could not repair (if it has these post of corruption here or try to analyze it to find the problem or files using http://support.microsoft.com/kb/928228.

  While in the command prompt, type chkdsk /f /r and enter and let it run.  It will scan and try to solve any corruption or bad sectors on your hard drive and remove especially as a cause.

  If that is not working, then please post repetitive errors in Event Viewer on the copy or paste functions (Start / Control Panel / administrative tools / Event Viewer).  Here's how to use Event Viewer: http://www.bleepingcomputer.com/forums/topic40108.html.

  If this does not work (or if SFC found corrupted files), we will need to do a repair/system upgrade using the Windows Vista Installation disc authentic (you own or you can borrow from someone).  Here is the procedure: http://www.vistax64.com/tutorials/88236-repair-install-vista.html as well as the upgrade from an earlier version of the Windows section of the following: http://support.microsoft.com/kb/918884.  Although this will not affect your data, settings or programs, you should always back up your data before you start just be on the safe side. If other procedures do not work, it is almost certain to work.  You can have a lot of updates to re - install (including all you need to remove service packs).  If the version of the system came with SP1 or SP2 preinstalled and the disc is an earlier version, then you will need to make a record of slipstream as follows: http://www.vistax64.com/tutorials/151606-vista-sp1-slipstream-installation-dvd.html.

  I hope one of these procedures can solve your problem.  If this isn't the case, after return and we will try something else.  Return message anyway so we know how it turns out.

  Good luck!

  Lorien - a - MCSE/MCSA/network + / A +.

• How can I check the status of the warranty of my computer laptop vaio?

  How can I check the status of the warranty of my computer laptop vaio?

  alexhrdata,

  Please see this post.

• ThinkPad R60 could not start beyond "checking the status of the integrated security chip.

  I am unable to load the OS-Windows XP because of the layout I did successfully:

  The system worked more slowly, I went to the troubleshooting of windows... and follow the procedure below:

  "' Help-> Pick a task-> use tools to view your computer information and diagnose problems-> SYSTEM-> Changed CONFIGURATION UTILITY to" START DIAGNOSTICS "and restarted the computer...

  But unfortunately,.

  My system is unable to exceed... "" Checking the status of embedded security chip ' and windows does not load.

  If anyone has the solution pl... answer a few important information lies in...

  Thanks in advance.

  I think that the error message says do not keep your finger on the key during the startup of the whole. Just press it several times in the time the windows logo should normally appear.

• In Windows Mail, journal on security keeps popping up asking me to check the user name and password.

  Original title: "Windows Security".

  I have Vista Home Premium with SP 2. In Windows Mail, logon security keeps popping up asking me to check the user name and password. This happens from time to time for many months and I've always got to work but happened several times today.  I can sign in the server through my ISP and get email. In Windows mail, I confirmed that the name of username-password is the same that I connect through the ISP.  I can't front/send by email but receive in Windows mail.

  Server response: '-ERR [IN USE] account is locked by another session or for maintenance, try again.',

  So wait a while and try again later.  You can also go to their website and log on there to see if it works.

  Also try to compact and repair the database (see www.oehelp.com/WMUtil/)

  Steve

• An error has occurred. Check the log file. C:\User\---\PamperedPartnerPlus\workspace\.metadata\.log

  What should I do: an error has occurred. Check the log file. C:\User\---\PamperedPartnerPlus\workspace\.metadata\.log.

  See this post and follow the instructions to update your program to possibly solve the problem.

  Technical support
  http://www.chefsuccess.com/F46/tech-support-41431/