ThinkPad R60 could not start beyond "checking the status of the integrated security chip.
I am unable to load the OS-Windows XP because of the layout I did successfully:
The system worked more slowly, I went to the troubleshooting of windows... and follow the procedure below:
"' Help-> Pick a task-> use tools to view your computer information and diagnose problems-> SYSTEM-> Changed CONFIGURATION UTILITY to" START DIAGNOSTICS "and restarted the computer...
But unfortunately,.
My system is unable to exceed... "" Checking the status of embedded security chip ' and windows does not load.
If anyone has the solution pl... answer a few important information lies in...
Thanks in advance.
I think that the error message says do not keep your finger on the key during the startup of the whole. Just press it several times in the time the windows logo should normally appear.
Tags: ThinkPad Notebooks
Similar Questions
-
Hello. First when I started my computer this is a white screen. After doing a hard a reboot screen pop up saying:
Windows could not start. A recent hardware or software change might be the cause.
He told me to insert your windows installation disc (which I did not).
He also says
Status: 0xc000000f
Info: The boot selection failed because a required device is not accessible.
Whenever I try to boot normally, it wouldn't let me.
Hello
You can use a repair disc. To obtain a repair disc, find someone with the 32-bit Windows 7 computer and create a system repair disk to repair your problem.
This link will help you...
http://maximumpcguides.com/Windows-7/create-a-Windows-7-system-repair-disc/
Checkurtech
-
Windows could not start after activating the boot.
Hi all
I have a very serious problem.
A few lost technology from Microsoft asked that I have to do the following:
http://support.Microsoft.com/kb/929135.
Immediately after the restart, I was confronted with the following message:
Windows could not start.
Status: 0xc000000e
Info: A required device is not connected or is not accessible.
Startup Repair does not work. -Root cause found: the partition table has not a Sys component validates.
System Restore does not work - the system cannot find the specified file (0 x 80070002)
Bootrec - rebuildbcd works no item was not found.
Bootcfg does not work - could not open the TRUNK. INI file.
Bcdedit does not work - the requested system device cannot be found.
GParted does not work - cannot load the ntfs module: invalid argument.
How can it be fixed, please?
It is an extremely urgent situation which must be resolved immediately, because I use this computer for work and need to return to work on a large commercial project Monday. Forget the original question that MS tech was trying to 'help' with, everything what I need now is to be able to get into Windows, or even just make this record available and accessible on the LAN computer.
Hi all, thank you for the advice.
Problem has been resolved after a cold start.
-
ASUS PC, Windows Vist Home premium, all updates.
Out of the blue, it will not start. Access the start scrolling (the one just before logon) screen and it just stops.
Twice I ran Vista check utility. The first time, I chose to do the system restore to previous state. Restarted. Always off. The second time, it took much longer and from what I can see. All TESTS PASS, except one:
Repair action: repair and checking of the filesystem Integrety
Result: failed. Error code = 0 x 2
Time required: 6206818ms
I get no blue screen, I can't even any screen!
I'm triying to repar because I have several costly software titles that link the authorization key code to a key hardware and software installation. I don't know that I could reinstall if I get a code (randomly?) different generated software.
I don't know about i-tunes and other content downloaded my wife has such as MP3 files and audio books.
Thanks for any help!
The test fails (SFC) checks for corruption in the files on your system. If she can't even complete, she suggests the Vista all system needs to be re-installed - but you have already done this and you still have the problem.
In fact, look like a hardware problem. Here are some troubleshooting guidelines hardware that can help (but probably not for this question as what you really need, it is a replacement for test):http://elephantboycomputers.com/page2.html#Hardware_Tshoot. Frankly, I think it's time to take the system to a repair facility of good reputation for the service computer (or to return to the manufacturer for repair - costs, schedule, guarantees and make a decision). I don't know what hardware component.
If you can, try to back up your data before you import it it because they will probably wipe the drive clean during the process. You can use Knoppix http://www.knopper.net/knoppix/index-en.html with a good ISO as Copier: http://isorecorder.alexfeinman.com/isorecorder.htm as well as a blank CD (perhaps done on another computer). This should give you enough access to the system (if you do not have any other means) to backup your important data. Otherwise, try slaving the drive to another system and access the data in this way.
I hope this helps.
Good luck!
Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.
-
Win operating system could not start because of the error in the software on the Satellite A85-S107?
Windows did not start because of an error in the software. Please report this problem as:
Load needed DLLs for kernel.
Please contact your support person to report this problem. »A blue screen is suddenly pop up when I was surfing on a Web site, the warning above in black and white was shown after that I took the battery and restart windows.
I thought it was just a simple step if I got the recovery disk, but I was wrong.The recovery procedure was very well finished 100%. But after pressing a button, the above kept warning appears, no matter how many times I had reinstalled by the recovery disc or (each time 100%) or by using the full version of Windows Xp.
Nor he worked by the formatting of the HD I connected with a link IDE2USB for laptop XP of my friend, nor modify another HD.
I excluded the problem with HD, so I guess maybe it's that the BIOS has been hacked (?) I downloaded the update of the BIOS to see if it works or not?
but the result was disappointing. IT just stop at step 4 of the procedure of updating, it freezes just to flash initiating step.I want to remove the CMOS battery for a few seconds, but I'm not that pro and I could cause damage caused by improper handling.
Could someone tell me what happens to my computer and how do I show this problem?
Hello Wai
If your device has trouble after that recovery image installation is probably hardware related issue. You can enter the settings of the BIOS as usual? If this isn't the case, I fear that the BIOS chip is damaged. It happen if BIOS update is interrupted shortly matter the reason may be.
Removing the CMOS battery doesn t work like on desktps. Forget it!
-
I have a computor, Dell has a dual-core processor and plenty of space... I down loaded the supreme commander game and when I click on the
shortcut to start the game, I get the cannot start the msg in my question... I think that everything I have satisfied the requirements... but don't know how to check or
fix the problem... help...
Check with the manufacturer of game?
THQ Commander supreme Support FAQGold - was the "supreme commander" or "Supreme Commander 2"?
-
Error 1920 service smart card could not start. With the help of Windows 8
We will try to install a CAC card on our computer to Windows 8. We have followed all the instructions so far, but continue to receive this error message when trying to install ActivClient: error 1920. (Scardsvr) smart card service failed to start. Make sure you have sufficient privledges to start system services.
This is a new computer & I had not assigned to an administrator. I opened a window to run as administrator. We always get the same message! Help!
I met the same mistake during the installation of the drivers for a token PKI of Windows 8.
I discovered the map service smart in the services of MMC has been set to disabled.
I went it to autostart (haven't started yet manually it) and retried the installation and it seems to have done the trick.
-
I'm trying to remove the silverlight program in order to reinstall it and watch movies from netflix. Why is it so difficult? What should I do?
Hello
Uninstall Silverlight by accessing this Web site. Click on uninstall Silverlight and follow the instructions.
http://www.Microsoft.com/getSilverlight/get-started/install/default.aspxThen download the latest version and install it on your computer. You can download Silverlight from the same link.
Kind regards
Afzal Taher
Microsoft technical support engineer -
Windows could not start File: \Boot\BCD status: 0xc000000f on a HP G6 2053ef (RESOLVED)
HI, I have this on my HP G6 2053ef, and I have an error message indicating that "an error occurred" trying to read the boot configuration data and also file: \Boot\BCD status: 0xc000000f
How can I solve it please, I have windows won start t all hekp would be much appreciated.
Kind regards
Yvouille
Hello
The following assumes that you are running Windows 7.
If you do not, use another PC to create a rescue CD Windows 7. Download the ISO relevant among the links below - if you are unsure of the version, your laptop is listed as coming from a 64-bit installation.
You must use an app like ImgBurn to burn the ISO to a CD-( Note: you can deselect additional software during installation of ImgBurn options)- hereis a guide on the use of ImgBurn to write an ISO on a disc.
One time created, or if you already have this, typing away at the esc key when you launch Notepad to open the Start Menu. Insert the rescue CD. Select boot options (usually f9), use the arrow keys to select the CD/DVD drive and press ENTER. You can also get a prompt to "Press any key to" continuous - it if requested.
When loading, select repair your computer and choose the command line. When this charge, enter the following commands and press on enter after everyone – including spaces as shown.
Bootrec.exe
bcdedit/export C:\BCD_Backup
c:
Boot CD
BCD attrib s h - r
Ren c:\boot\bcd BCD.old
Bootrec /RebuildBcd
Bootrec /fixmbr
Bootrec /fixboot
Remove the rescue CD and try to restart the laptop.
Kind regards
DP - K
-
Task Scheduler could not start. Additional data: error value: 2147943726. What does that mean?
A scheduled task could not start leaving this message: Task Scheduler could not start '\Fence check Rota' task for the user "Alan Laptop\Alan". Additional data: error value: 2147943726.
The task ran on the previous 2 nights without problem Action is: "C:\Program Files\Microsoft Office\Office12\Excel.exe" / r "C:\Users\Alan\Documents\HSC\Fence Check\Fence check Auto Run.xlsm" and there is nothing wrong with it all the files are where they are supposed to be.
After "the event log online Help" takes me to a page that tells me to convert the code above in a decimal value and search for it on another page. This has error codes in the 0 to 15999 slices. The value I have to 214793726 is obviuosly not an Octal value because it contains the 9 digit and if a decimal value is greater than 15999 and if hexagonal then considerably higher.
Can someone tell me what is a failure?
My answer comes late, but I hope useful for those seeking a response.
As some have said above, changing the password has a role at the origin of this error. \
quickist fix (instead of changing long ms.config of microsoft) is:
in Task Scheduler, click the scheduled task properties > then settings
in the last option listed:
"If the task is already running, the following rule shall:
Select "stop the existing instance" in the drop-down list.
Save and exist.
This should fix it.
-
NAC AD SSO error: could not start the SSO service. Please check the configuration.
Hi, can someone please help me with a problem of SSO?
I'm trying to start the SINGLE sign-on service, but when I try to update I get the error message: "error: could not start the SSO service.» Please check the configuration. »
The announcement is a Windows 2008 Server Standard R2 (64-bit) running at a 2003 domain functional level. (several servers) with the deployment of the OOB
I was unable to ping the advertising server CASE CLI, so I created a static route to the announcement on the server of the ANC, and after that I successfully of the NAC Server ping IP address of the AD. The nac_server.log when I try to start the SSO:
[[email protected]/ * / _primary_ag ~] # ping 10.200.0.3
PING 10.200.0.3 (10.200.0.3) 56 (84) bytes of data.
64 bytes from 10.200.0.3: icmp_seq = 1 ttl = 128 time = 0,247 ms
64 bytes from 10.200.0.3: icmp_seq = 2 ttl = 128 time = 0,232 ms
-ping - 10.200.0.3 statistics
2 packets transmitted, 2 received, 0% packet loss, time 999ms
RTT min/avg/max/leg = 0.232/0.239/0.247/0.017 ms
[[email protected]/ * / _primary_ag ~] # tail-f /perfigo/access/tomcat/logs/nac_server.log
2012-07-27 17:20:39.079-0300 connection TCP RMI 83 - 10.200.48.101 DEBUG com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper - unregisterMBean: DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo
2012-07-27 17:20:39.079-0300 connection TCP RMI 83 - 10.200.48.101 DEBUG com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper - unregisterMBean: DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo:DURATION = 0
2012-07-27 17:20:39.080-0300 connection TCP RMI 83 - 10.200.48.101 com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper - createMBean DEBUG: com.perfigo.wlan.jmx.admin.ServerInfo:DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo:CAS:type = MLet, name = casLoader
2012-07-27 17:20:39.080-0300 connection TCP RMI 83 - 10.200.48.101 com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper - createMBean DEBUG: com.perfigo.wlan.jmx.admin.ServerInfo:DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo:CAS:type = MLet, name = casLoader:DURATION = 0
2012-07-27 17:20:39.080 connection TCP RMI 83 - 10.200.48.101 DEBUG com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper --0300 call: DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo:init
2012-07-27 17:20:39.080 connection TCP RMI 83 - 10.200.48.101 DEBUG com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper --0300 call: DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo:init:DURATION = 0
2012-07-27 17:20:39.081 connection TCP RMI 83 - 10.200.48.101 DEBUG com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper --0300 call: DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo:isServerInSync
2012-07-27 17:20:39.081 connection TCP RMI 83 - 10.200.48.101 DEBUG com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper --0300 call: DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo:isServerInSync:DURATION = 0
2012-07-27 17:20:39.081-0300 connection TCP RMI 83 - 10.200.48.101 com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper - getAttribute DEBUG: DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo:CurrMgrEth0Ip
2012-07-27 17:20:39.081-0300 connection TCP RMI 83 - 10.200.48.101 com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper - getAttribute DEBUG: DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo:CurrMgrEth0Ip:DURATION = 0
2012-07-27 17:20:41.775-0300 connection TCP RMI 83 - 10.200.48.101 com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper - isRegistered DEBUG: DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo
2012-07-27 17:20:41.775-0300 connection TCP RMI 83 - 10.200.48.101 com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper - isRegistered DEBUG: DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo:DURATION = 0
2012-07-27 17:20:41.775-0300 connection TCP RMI 83 - 10.200.48.101 DEBUG com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper - unregisterMBean: DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo
2012-07-27 17:20:41.775-0300 connection TCP RMI 83 - 10.200.48.101 DEBUG com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper - unregisterMBean: DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo:DURATION = 0
2012-07-27 17:20:41.776-0300 connection TCP RMI 83 - 10.200.48.101 com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper - createMBean DEBUG: com.perfigo.wlan.jmx.admin.ServerInfo:DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo:CAS:type = MLet, name = casLoader
2012-07-27 17:20:41.776-0300 connection TCP RMI 83 - 10.200.48.101 com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper - createMBean DEBUG: com.perfigo.wlan.jmx.admin.ServerInfo:DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo:CAS:type = MLet, name = casLoader:DURATION = 0
2012-07-27 17:20:41.777 connection TCP RMI 83 - 10.200.48.101 DEBUG com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper --0300 call: DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo:init
2012-07-27 17:20:41.777 connection TCP RMI 83 - 10.200.48.101 DEBUG com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper --0300 call: DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo:init:DURATION = 0
2012-07-27 17:20:41.777-0300 connection TCP RMI 83 - 10.200.48.101 com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper - setAttribute DEBUG: DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo:SSOState = 1
2012-07-27 17:20:41.777-0300 connection TCP RMI 83 - 10.200.48.101 com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper - setAttribute DEBUG: DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo:SSOState = 1:DURATION = 0
2012-07-27 17:20:41.778-0300 connection TCP RMI 83 - 10.200.48.101 com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper - setAttribute DEBUG: DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo:SSOUser = casuser
2012-07-27 17:20:41.778-0300 connection TCP RMI 83 - 10.200.48.101 com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper - setAttribute DEBUG: DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo:SSOUser = casuser:DURATION = 0
2012-07-27 17:20:41.778-0300 connection TCP RMI 83 - 10.200.48.101 com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper - setAttribute DEBUG: DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo:SSOKdc = nissin.com.br
2012-07-27 17:20:41.778-0300 connection TCP RMI 83 - 10.200.48.101 com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper - setAttribute DEBUG: DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo:SSOKdc = nissin.com.br:DURATION = 0
2012-07-27 17:20:41.779-0300 connection TCP RMI 83 - 10.200.48.101 com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper - setAttribute DEBUG: DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo:SSORealm = NISSIN.COM.BR
2012-07-27 17:20:41.779-0300 connection TCP RMI 83 - 10.200.48.101 com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper - setAttribute DEBUG: DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo:SSORealm = NISSIN.COM.BR:DURATION = 0
2012-07-27 17:20:41.779 connection TCP RMI 83 - 10.200.48.101 DEBUG com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper --0300 call: DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo:save
2012-07-27 17:20:41.779 connection TCP RMI 83 - 10.200.48.101 DEBUG com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper --0300 call: DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo:save:DURATION = 0
2012-07-27 17:20:41.780 connection TCP RMI 83 - 10.200.48.101 DEBUG com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper --0300 call: DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo:startSSOServer
2012-07-27 17:20:41.780 connection TCP RMI 83 - 10.200.48.101 DEBUG com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper --0300 call: DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo:startSSOServer:DURATION = 0
2012-07-27 17:20:58.605-0300 TRACE Timer-0 com.perfigo.wlan.jmx.admin.FailSafeManager - FailSafeManager is running: {0.85,0.3, [0: 15:15]}: DETECT_INTERVAL = 20:DETECT_TIME_OUT = 300
2012-07-27 17:20:58.608-0300 TRACE Timer-0 com.perfigo.wlan.jmx.admin.FailSafeManager - FailSafeManager http_code = 200: {0.85,0.3, [0: 15:15]}
[2012-07-27 17:20:58.608-0300 TRACE Timer-0 com.perfigo.wlan.jmx.admin.FailSafeManager - FailSafeManager go to sleep: delay of {0.85,0.3, [0: 15:15]}] = 19997
[2012-07-27 17:21:08.892-0300 connection TCP RMI 83 - 10.200.48.101 DEBUG com.perfigo.wlan.ssl.SSLLog - RMISocketFactory: removed socket: 173d72d [TLS_RSA_WITH_AES_128_CBC_SHA: Socket[addr=/10.200.48.101,port=11093,localport=1099]]
2012-07-27 17:21:08.892-0300 connection TCP RMI 83 - 10.200.48.101 com.perfigo.wlan.ssl.SSLLog - RMISocketFactory:CACHED_SOCKETS_SIZE = 0 DEBUG
2012-07-27 17:21:08.892-0300 connection TCP RMI 83 - 10.200.48.101 com.perfigo.wlan.ssl.SSLLog - RMISocketFactory:CACHED_SOCKETSE DEBUG =]
2012-07-27 17:21:08.892-0300 connection TCP RMI 83 - 10.200.48.101 com.perfigo.wlan.ssl.SSLLog - RMISocketFactory:CACHED_SOCKETS_SIZE = 0 DEBUG
2012-07-27 17:21:08.892-0300 connection TCP RMI 83 - 10.200.48.101 com.perfigo.wlan.ssl.SSLLog - RMISocketFactory:CACHED_SOCKETSE DEBUG =]
2012-07-27 17:21:18.610-0300 TRACE Timer-0 com.perfigo.wlan.jmx.admin.FailSafeManager - FailSafeManager is running: {0.85,0.3, [0: 15:15]}: DETECT_INTERVAL = 20:DETECT_TIME_OUT = 300
2012-07-27 17:21:18.613-0300 TRACE Timer-0 com.perfigo.wlan.jmx.admin.FailSafeManager - FailSafeManager http_code = 200: {0.85,0.3, [0: 15:15]}
[2012-07-27 17:21:18.613-0300 TRACE Timer-0 com.perfigo.wlan.jmx.admin.FailSafeManager - FailSafeManager go to sleep: delay of {0.85,0.3, [0: 15:15]}] = 19997
2012-07-27 17:21:38.615-0300 TRACE Timer-0 com.perfigo.wlan.jmx.admin.FailSafeManager - FailSafeManager is running: {0.85,0.3, [0: 15:15]}: DETECT_INTERVAL = 20:DETECT_TIME_OUT = 300
2012-07-27 17:21:38.618-0300 TRACE Timer-0 com.perfigo.wlan.jmx.admin.FailSafeManager - FailSafeManager http_code = 200: {0.85,0.3, [0: 15:15]}
[2012-07-27 17:21:38.618-0300 TRACE Timer-0 com.perfigo.wlan.jmx.admin.FailSafeManager - FailSafeManager go to sleep: delay of {0.85,0.3, [0: 15:15]}] = 19997
2012-07-27 17:21:41.794-0300 DEBUG Thread-246 com.perfigo.wlan.common.HttpClientResource - go to url https://10.200.48.100:443 / wlan/gss/GSSNotificationServlet ...
[2012-07-27 17:21:41.813-0300 HandshakeCompletedNotify-threaded DEBUG com.perfigo.wlan.ssl.SSLLog - RMISocketFactory: added the socket: 1e7e7ac [TLS_RSA_WITH_AES_128_CBC_SHA: Socket[addr=/10.200.48.101,port=19660,localport=1099]]
2012-07-27 17:21:41.814-0300 HandshakeCompletedNotify-threaded DEBUG com.perfigo.wlan.ssl.SSLLog - RMISocketFactory:CACHED_SOCKETS_SIZE = 1
[2012-07-27 17:21:41.814-0300 HandshakeCompletedNotify-threaded DEBUG com.perfigo.wlan.ssl.SSLLog - RMISocketFactory:CACHED_SOCKETSE = [1e7e7ac [TLS_RSA_WITH_AES_128_CBC_SHA: Socket[addr=/10.200.48.101,port=19660,localport=1099]]]
2012-07-27 17:21:41.814-0300 connection TCP RMI 85 - 10.200.48.101 com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper - getAttribute DEBUG: DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo:SSOStatus
2012-07-27 17:21:41.814-0300 connection TCP RMI 85 - 10.200.48.101 com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper - getAttribute DEBUG: DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo:SSOStatus:DURATION = 0
2012-07-27 17:21:44.103-0300 connection TCP RMI 85 - 10.200.48.101 com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper - isRegistered DEBUG: DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo
2012-07-27 17:21:44.103-0300 connection TCP RMI 85 - 10.200.48.101 com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper - isRegistered DEBUG: DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo:DURATION = 0
2012-07-27 17:21:44.104-0300 connection TCP RMI 85 - 10.200.48.101 DEBUG com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper - unregisterMBean: DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo
2012-07-27 17:21:44.104-0300 connection TCP RMI 85 - 10.200.48.101 DEBUG com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper - unregisterMBean: DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo:DURATION = 0
2012-07-27 17:21:44.104-0300 connection TCP RMI 85 - 10.200.48.101 com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper - createMBean DEBUG: com.perfigo.wlan.jmx.admin.ServerInfo:DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo:CAS:type = MLet, name = casLoader
2012-07-27 17:21:44.104-0300 connection TCP RMI 85 - 10.200.48.101 com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper - createMBean DEBUG: com.perfigo.wlan.jmx.admin.ServerInfo:DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo:CAS:type = MLet, name = casLoader:DURATION = 0
2012-07-27 17:21:44.105 connection TCP RMI 85 - 10.200.48.101 DEBUG com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper --0300 call: DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo:init
2012-07-27 17:21:44.105 connection TCP RMI 85 - 10.200.48.101 DEBUG com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper --0300 call: DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo:init:DURATION = 0
2012-07-27 17:21:44.105 connection TCP RMI 85 - 10.200.48.101 DEBUG com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper --0300 call: DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo:isServerInSync
2012-07-27 17:21:44.106 connection TCP RMI 85 - 10.200.48.101 DEBUG com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper --0300 call: DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo:isServerInSync:DURATION = 1
2012-07-27 17:21:44.106-0300 connection TCP RMI 85 - 10.200.48.101 com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper - getAttribute DEBUG: DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo:CurrMgrEth0Ip
2012-07-27 17:21:44.106-0300 connection TCP RMI 85 - 10.200.48.101 com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper - getAttribute DEBUG: DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo:CurrMgrEth0Ip:DURATION = 0
2012-07-27 17:21:49.105-0300 connection TCP RMI 85 - 10.200.48.101 com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper - isRegistered DEBUG: DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo
2012-07-27 17:21:49.105-0300 connection TCP RMI 85 - 10.200.48.101 com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper - isRegistered DEBUG: DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo:DURATION = 0
2012-07-27 17:21:49.105-0300 connection TCP RMI 85 - 10.200.48.101 DEBUG com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper - unregisterMBean: DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo
2012-07-27 17:21:49.105-0300 connection TCP RMI 85 - 10.200.48.101 DEBUG com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper - unregisterMBean: DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo:DURATION = 0
2012-07-27 17:21:49.106-0300 connection TCP RMI 85 - 10.200.48.101 com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper - createMBean DEBUG: com.perfigo.wlan.jmx.admin.ServerInfo:DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo:CAS:type = MLet, name = casLoader
2012-07-27 17:21:49.106-0300 connection TCP RMI 85 - 10.200.48.101 com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper - createMBean DEBUG: com.perfigo.wlan.jmx.admin.ServerInfo:DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo:CAS:type = MLet, name = casLoader:DURATION = 0
2012-07-27 17:21:49.107 connection TCP RMI 85 - 10.200.48.101 DEBUG com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper --0300 call: DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo:init
2012-07-27 17:21:49.107 connection TCP RMI 85 - 10.200.48.101 DEBUG com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper --0300 call: DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo:init:DURATION = 0
2012-07-27 17:21:49.107 connection TCP RMI 85 - 10.200.48.101 DEBUG com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper --0300 call: DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo:isServerInSync
2012-07-27 17:21:49.107 connection TCP RMI 85 - 10.200.48.101 DEBUG com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper --0300 call: DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo:isServerInSync:DURATION = 0
2012-07-27 17:21:49.108-0300 connection TCP RMI 85 - 10.200.48.101 com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper - getAttribute DEBUG: DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo:CurrMgrEth0Ip
2012-07-27 17:21:49.108-0300 connection TCP RMI 85 - 10.200.48.101 com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper - getAttribute DEBUG: DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo:CurrMgrEth0Ip:DURATION = 0
2012-07-27 17:21:54.107-0300 connection TCP RMI 85 - 10.200.48.101 com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper - isRegistered DEBUG: DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo
2012-07-27 17:21:54.107-0300 connection TCP RMI 85 - 10.200.48.101 com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper - isRegistered DEBUG: DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo:DURATION = 0
2012-07-27 17:21:54.108-0300 connection TCP RMI 85 - 10.200.48.101 DEBUG com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper - unregisterMBean: DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo
2012-07-27 17:21:54.108-0300 connection TCP RMI 85 - 10.200.48.101 DEBUG com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper - unregisterMBean: DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo:DURATION = 0
2012-07-27 17:21:54.108-0300 connection TCP RMI 85 - 10.200.48.101 com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper - createMBean DEBUG: com.perfigo.wlan.jmx.admin.ServerInfo:DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo:CAS:type = MLet, name = casLoader
2012-07-27 17:21:54.108-0300 connection TCP RMI 85 - 10.200.48.101 com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper - createMBean DEBUG: com.perfigo.wlan.jmx.admin.ServerInfo:DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo:CAS:type = MLet, name = casLoader:DURATION = 0
2012-07-27 17:21:54.109 connection TCP RMI 85 - 10.200.48.101 DEBUG com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper --0300 call: DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo:init
2012-07-27 17:21:54.109 connection TCP RMI 85 - 10.200.48.101 DEBUG com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper --0300 call: DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo:init:DURATION = 0
2012-07-27 17:21:54.110 connection TCP RMI 85 - 10.200.48.101 DEBUG com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper --0300 call: DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo:isServerInSync
2012-07-27 17:21:54.110 connection TCP RMI 85 - 10.200.48.101 DEBUG com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper --0300 call: DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo:isServerInSync:DURATION = 0
2012-07-27 17:21:54.110-0300 connection TCP RMI 85 - 10.200.48.101 com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper - getAttribute DEBUG: DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo:CurrMgrEth0Ip
2012-07-27 17:21:54.110-0300 connection TCP RMI 85 - 10.200.48.101 com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper - getAttribute DEBUG: DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo:CurrMgrEth0Ip:DURATION = 0
2012-07-27 17:21:58.619-0300 TRACE Timer-0 com.perfigo.wlan.jmx.admin.FailSafeManager - FailSafeManager is running: {0.85,0.3, [0: 15:15]}: DETECT_INTERVAL = 20:DETECT_TIME_OUT = 300
2012-07-27 17:21:58.622-0300 TRACE Timer-0 com.perfigo.wlan.jmx.admin.FailSafeManager - FailSafeManager http_code = 200: {0.85,0.3, [0: 15:15]}
[2012-07-27 17:21:58.622-0300 TRACE Timer-0 com.perfigo.wlan.jmx.admin.FailSafeManager - FailSafeManager go to sleep: delay of {0.85,0.3, [0: 15:15]}] = 19997
2012-07-27 17:21:59.109-0300 connection TCP RMI 85 - 10.200.48.101 com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper - isRegistered DEBUG: DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo
2012-07-27 17:21:59.109-0300 connection TCP RMI 85 - 10.200.48.101 com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper - isRegistered DEBUG: DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo:DURATION = 0
2012-07-27 17:21:59.110-0300 connection TCP RMI 85 - 10.200.48.101 DEBUG com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper - unregisterMBean: DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo
2012-07-27 17:21:59.110-0300 connection TCP RMI 85 - 10.200.48.101 DEBUG com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper - unregisterMBean: DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo:DURATION = 0
2012-07-27 17:21:59.110-0300 connection TCP RMI 85 - 10.200.48.101 com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper - createMBean DEBUG: com.perfigo.wlan.jmx.admin.ServerInfo:DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo:CAS:type = MLet, name = casLoader
2012-07-27 17:21:59.110-0300 connection TCP RMI 85 - 10.200.48.101 com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper - createMBean DEBUG: com.perfigo.wlan.jmx.admin.ServerInfo:DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo:CAS:type = MLet, name = casLoader:DURATION = 0
2012-07-27 17:21:59.111 connection TCP RMI 85 - 10.200.48.101 DEBUG com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper --0300 call: DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo:init
2012-07-27 17:21:59.111 connection TCP RMI 85 - 10.200.48.101 DEBUG com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper --0300 call: DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo:init:DURATION = 0
2012-07-27 17:21:59.112 connection TCP RMI 85 - 10.200.48.101 DEBUG com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper --0300 call: DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo:isServerInSync
2012-07-27 17:21:59.112 connection TCP RMI 85 - 10.200.48.101 DEBUG com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper --0300 call: DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo:isServerInSync:DURATION = 0
2012-07-27 17:21:59.113-0300 connection TCP RMI 85 - 10.200.48.101 com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper - getAttribute DEBUG: DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo:CurrMgrEth0Ip
2012-07-27 17:21:59.113-0300 connection TCP RMI 85 - 10.200.48.101 com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper - getAttribute DEBUG: DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo:CurrMgrEth0Ip:DURATION = 0
2012-07-27 17:22:04.111-0300 connection TCP RMI 85 - 10.200.48.101 com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper - isRegistered DEBUG: DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo
2012-07-27 17:22:04.111-0300 connection TCP RMI 85 - 10.200.48.101 com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper - isRegistered DEBUG: DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo:DURATION = 0
2012-07-27 17:22:04.112-0300 connection TCP RMI 85 - 10.200.48.101 DEBUG com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper - unregisterMBean: DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo
2012-07-27 17:22:04.112-0300 connection TCP RMI 85 - 10.200.48.101 DEBUG com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper - unregisterMBean: DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo:DURATION = 0
2012-07-27 17:22:04.112-0300 connection TCP RMI 85 - 10.200.48.101 com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper - createMBean DEBUG: com.perfigo.wlan.jmx.admin.ServerInfo:DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo:CAS:type = MLet, name = casLoader
2012-07-27 17:22:04.113-0300 connection TCP RMI 85 - 10.200.48.101 com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper - createMBean DEBUG: com.perfigo.wlan.jmx.admin.ServerInfo:DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo:CAS:type = MLet, name = casLoader:DURATION = 1
2012-07-27 17:22:04.113 connection TCP RMI 85 - 10.200.48.101 DEBUG com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper --0300 call: DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo:init
2012-07-27 17:22:04.113 connection TCP RMI 85 - 10.200.48.101 DEBUG com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper --0300 call: DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo:init:DURATION = 0
2012-07-27 17:22:04.114 connection TCP RMI 85 - 10.200.48.101 DEBUG com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper --0300 call: DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo:isServerInSync
2012-07-27 17:22:04.114 connection TCP RMI 85 - 10.200.48.101 DEBUG com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper --0300 call: DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo:isServerInSync:DURATION = 0
2012-07-27 17:22:04.114-0300 connection TCP RMI 85 - 10.200.48.101 com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper - getAttribute DEBUG: DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo:CurrMgrEth0Ip
2012-07-27 17:22:04.114-0300 connection TCP RMI 85 - 10.200.48.101 com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper - getAttribute DEBUG: DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo:CurrMgrEth0Ip:DURATION = 0
2012-07-27 17:22:09.114-0300 connection TCP RMI 85 - 10.200.48.101 com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper - isRegistered DEBUG: DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo
2012-07-27 17:22:09.114-0300 connection TCP RMI 85 - 10.200.48.101 com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper - isRegistered DEBUG: DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo:DURATION = 0
2012-07-27 17:22:09.114-0300 connection TCP RMI 85 - 10.200.48.101 DEBUG com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper - unregisterMBean: DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo
2012-07-27 17:22:09.114-0300 connection TCP RMI 85 - 10.200.48.101 DEBUG com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper - unregisterMBean: DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo:DURATION = 0
2012-07-27 17:22:09.115-0300 connection TCP RMI 85 - 10.200.48.101 com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper - createMBean DEBUG: com.perfigo.wlan.jmx.admin.ServerInfo:DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo:CAS:type = MLet, name = casLoader
2012-07-27 17:22:09.115-0300 connection TCP RMI 85 - 10.200.48.101 com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper - createMBean DEBUG: com.perfigo.wlan.jmx.admin.ServerInfo:DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo:CAS:type = MLet, name = casLoader:DURATION = 0
2012-07-27 17:22:09.116 connection TCP RMI 85 - 10.200.48.101 DEBUG com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper --0300 call: DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo:init
2012-07-27 17:22:09.116 connection TCP RMI 85 - 10.200.48.101 DEBUG com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper --0300 call: DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo:init:DURATION = 1
2012-07-27 17:22:09.116 connection TCP RMI 85 - 10.200.48.101 DEBUG com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper --0300 call: DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo:isServerInSync
2012-07-27 17:22:09.116 connection TCP RMI 85 - 10.200.48.101 DEBUG com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper --0300 call: DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo:isServerInSync:DURATION = 0
2012-07-27 17:22:09.117-0300 connection TCP RMI 85 - 10.200.48.101 com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper - getAttribute DEBUG: DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo:CurrMgrEth0Ip
2012-07-27 17:22:09.117-0300 connection TCP RMI 85 - 10.200.48.101 com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper - getAttribute DEBUG: DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo:CurrMgrEth0Ip:DURATION = 0
2012-07-27 17:22:14.116-0300 connection TCP RMI 85 - 10.200.48.101 com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper - isRegistered DEBUG: DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo
2012-07-27 17:22:14.116-0300 connection TCP RMI 85 - 10.200.48.101 com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper - isRegistered DEBUG: DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo:DURATION = 0
2012-07-27 17:22:14.116-0300 connection TCP RMI 85 - 10.200.48.101 DEBUG com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper - unregisterMBean: DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo
2012-07-27 17:22:14.116-0300 connection TCP RMI 85 - 10.200.48.101 DEBUG com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper - unregisterMBean: DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo:DURATION = 0
2012-07-27 17:22:14.117-0300 connection TCP RMI 85 - 10.200.48.101 com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper - createMBean DEBUG: com.perfigo.wlan.jmx.admin.ServerInfo:DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo:CAS:type = MLet, name = casLoader
2012-07-27 17:22:14.117-0300 connection TCP RMI 85 - 10.200.48.101 com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper - createMBean DEBUG: com.perfigo.wlan.jmx.admin.ServerInfo:DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo:CAS:type = MLet, name = casLoader:DURATION = 0
2012-07-27 17:22:14.117 connection TCP RMI 85 - 10.200.48.101 DEBUG com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper --0300 call: DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo:init
2012-07-27 17:22:14.118 connection TCP RMI 85 - 10.200.48.101 DEBUG com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper --0300 call: DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo:init:DURATION = 1
2012-07-27 17:22:14.118 connection TCP RMI 85 - 10.200.48.101 DEBUG com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper --0300 call: DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo:isServerInSync
2012-07-27 17:22:14.118 connection TCP RMI 85 - 10.200.48.101 DEBUG com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper --0300 call: DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo:isServerInSync:DURATION = 0
2012-07-27 17:22:14.119-0300 connection TCP RMI 85 - 10.200.48.101 com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper - getAttribute DEBUG: DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo:CurrMgrEth0Ip
2012-07-27 17:22:14.119-0300 connection TCP RMI 85 - 10.200.48.101 com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper - getAttribute DEBUG: DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo:CurrMgrEth0Ip:DURATION = 0
2012-07-27 17:22:17.017-0300 DEBUG RMI RenewClean-[10.200.2.103:1099] com.perfigo.wlan.ssl.SSLLog - RMISocketFactory:CACHED_SOCKETS_SIZE = 2
[[2012-07-27 17:22:17.017 - 0300 DEBUG RMI RenewClean-[10.200.2.103:1099] com.perfigo.wlan.ssl.SSLLog - RMISocketFactory:CACHED_SOCKETSE = [1e7e7ac [TLS_RSA_WITH_AES_128_CBC_SHA: Socket[addr=/10.200.48.101,port=19660,localport=1099]], 1871db1 [TLS_RSA_WITH_AES_128_CBC_SHA: Socket[addr=server_primary_ag/10.200.2.103,port=1099,localport=12312]]]
[2012-07-27 17:22:17.017-0300 HandshakeCompletedNotify-threaded DEBUG com.perfigo.wlan.ssl.SSLLog - RMISocketFactory: socket: 59725 c added [TLS_RSA_WITH_AES_128_CBC_SHA: Socket[addr=/10.200.2.103,port=12312,localport=1099]]
2012-07-27 17:22:17.017-0300 HandshakeCompletedNotify-threaded DEBUG com.perfigo.wlan.ssl.SSLLog - RMISocketFactory:CACHED_SOCKETS_SIZE = 3
[[[2012-07-27 17:22:17.017-0300 HandshakeCompletedNotify-threaded DEBUG com.perfigo.wlan.ssl.SSLLog - RMISocketFactory:CACHED_SOCKETSE = [1e7e7ac [TLS_RSA_WITH_AES_128_CBC_SHA: Socket[addr=/10.200.48.101,port=19660,localport=1099]], 1871db1 [TLS_RSA_WITH_AES_128_CBC_SHA: Socket[addr=server_primary_ag/10.200.2.103,port=1099,localport=12312]], 59725 c [TLS_RSA_WITH_AES_128_CBC_SHA: Socket[addr=/10.200.2.103,port=12312,localport=1099]]]
2012-07-27 17:22:18.624-0300 TRACE Timer-0 com.perfigo.wlan.jmx.admin.FailSafeManager - FailSafeManager is running: {0.85,0.3, [0: 15:15]}: DETECT_INTERVAL = 20:DETECT_TIME_OUT = 300
2012-07-27 17:22:18.627-0300 TRACE Timer-0 com.perfigo.wlan.jmx.admin.FailSafeManager - FailSafeManager http_code = 200: {0.85,0.3, [0: 15:15]}
[2012-07-27 17:22:18.627-0300 TRACE Timer-0 com.perfigo.wlan.jmx.admin.FailSafeManager - FailSafeManager go to sleep: delay of {0.85,0.3, [0: 15:15]}] = 19997
2012-07-27 17:22:19.118-0300 connection TCP RMI 85 - 10.200.48.101 com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper - isRegistered DEBUG: DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo
2012-07-27 17:22:19.118-0300 connection TCP RMI 85 - 10.200.48.101 com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper - isRegistered DEBUG: DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo:DURATION = 0
2012-07-27 17:22:19.118-0300 connection TCP RMI 85 - 10.200.48.101 DEBUG com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper - unregisterMBean: DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo
2012-07-27 17:22:19.118-0300 connection TCP RMI 85 - 10.200.48.101 DEBUG com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper - unregisterMBean: DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo:DURATION = 0
2012-07-27 17:22:19.119-0300 connection TCP RMI 85 - 10.200.48.101 com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper - createMBean DEBUG: com.perfigo.wlan.jmx.admin.ServerInfo:DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo:CAS:type = MLet, name = casLoader
2012-07-27 17:22:19.119-0300 connection TCP RMI 85 - 10.200.48.101 com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper - createMBean DEBUG: com.perfigo.wlan.jmx.admin.ServerInfo:DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo:CAS:type = MLet, name = casLoader:DURATION = 0
2012-07-27 17:22:19.120 connection TCP RMI 85 - 10.200.48.101 DEBUG com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper --0300 call: DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo:init
2012-07-27 17:22:19.120 connection TCP RMI 85 - 10.200.48.101 DEBUG com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper --0300 call: DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo:init:DURATION = 0
2012-07-27 17:22:19.120 connection TCP RMI 85 - 10.200.48.101 DEBUG com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper --0300 call: DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo:isServerInSync
2012-07-27 17:22:19.120 connection TCP RMI 85 - 10.200.48.101 DEBUG com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper --0300 call: DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo:isServerInSync:DURATION = 0
2012-07-27 17:22:19.121-0300 connection TCP RMI 85 - 10.200.48.101 com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper - getAttribute DEBUG: DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo:CurrMgrEth0Ip
2012-07-27 17:22:19.121-0300 connection TCP RMI 85 - 10.200.48.101 com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper - getAttribute DEBUG: DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo:CurrMgrEth0Ip:DURATION = 0
2012-07-27 17:22:24.119-0300 connection TCP RMI 85 - 10.200.48.101 com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper - isRegistered DEBUG: DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo
2012-07-27 17:22:24.119-0300 connection TCP RMI 85 - 10.200.48.101 com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper - isRegistered DEBUG: DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo:DURATION = 0
2012-07-27 17:22:24.119-0300 connection TCP RMI 85 - 10.200.48.101 DEBUG com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper - unregisterMBean: DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo
2012-07-27 17:22:24.119-0300 connection TCP RMI 85 - 10.200.48.101 DEBUG com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper - unregisterMBean: DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo:DURATION = 0
2012-07-27 17:22:24.120-0300 connection TCP RMI 85 - 10.200.48.101 com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper - createMBean DEBUG: com.perfigo.wlan.jmx.admin.ServerInfo:DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo:CAS:type = MLet, name = casLoader
2012-07-27 17:22:24.120-0300 connection TCP RMI 85 - 10.200.48.101 com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper - createMBean DEBUG: com.perfigo.wlan.jmx.admin.ServerInfo:DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo:CAS:type = MLet, name = casLoader:DURATION = 0
2012-07-27 17:22:24.121 connection TCP RMI 85 - 10.200.48.101 DEBUG com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper --0300 call: DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo:init
2012-07-27 17:22:24.121 connection TCP RMI 85 - 10.200.48.101 DEBUG com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper --0300 call: DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo:init:DURATION = 0
2012-07-27 17:22:24.122 connection TCP RMI 85 - 10.200.48.101 DEBUG com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper --0300 call: DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo:isServerInSync
2012-07-27 17:22:24.122 connection TCP RMI 85 - 10.200.48.101 DEBUG com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper --0300 call: DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo:isServerInSync:DURATION = 0
2012-07-27 17:22:24.122-0300 connection TCP RMI 85 - 10.200.48.101 com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper - getAttribute DEBUG: DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo:CurrMgrEth0Ip
2012-07-27 17:22:24.122-0300 connection TCP RMI 85 - 10.200.48.101 com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper - getAttribute DEBUG: DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo:CurrMgrEth0Ip:DURATION = 0
2012-07-27 17:22:29.120-0300 connection TCP RMI 85 - 10.200.48.101 com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper - isRegistered DEBUG: DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo
2012-07-27 17:22:29.120-0300 connection TCP RMI 85 - 10.200.48.101 com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper - isRegistered DEBUG: DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo:DURATION = 0
2012-07-27 17:22:29.121-0300 connection TCP RMI 85 - 10.200.48.101 DEBUG com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper - unregisterMBean: DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo
2012-07-27 17:22:29.121-0300 connection TCP RMI 85 - 10.200.48.101 DEBUG com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper - unregisterMBean: DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo:DURATION = 0
2012-07-27 17:22:29.121-0300 connection TCP RMI 85 - 10.200.48.101 com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper - createMBean DEBUG: com.perfigo.wlan.jmx.admin.ServerInfo:DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo:CAS:type = MLet, name = casLoader
2012-07-27 17:22:29.121-0300 connection TCP RMI 85 - 10.200.48.101 com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper - createMBean DEBUG: com.perfigo.wlan.jmx.admin.ServerInfo:DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo:CAS:type = MLet, name = casLoader:DURATION = 0
2012-07-27 17:22:29.122 connection TCP RMI 85 - 10.200.48.101 DEBUG com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper --0300 call: DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo:init
2012-07-27 17:22:29.122 connection TCP RMI 85 - 10.200.48.101 DEBUG com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper --0300 call: DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo:init:DURATION = 0
2012-07-27 17:22:29.123 connection TCP RMI 85 - 10.200.48.101 DEBUG com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper --0300 call: DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo:isServerInSync
2012-07-27 17:22:29.123 connection TCP RMI 85 - 10.200.48.101 DEBUG com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper --0300 call: DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo:isServerInSync:DURATION = 0
2012-07-27 17:22:29.123-0300 connection TCP RMI 85 - 10.200.48.101 com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper - getAttribute DEBUG: DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo:CurrMgrEth0Ip
2012-07-27 17:22:29.123-0300 connection TCP RMI 85 - 10.200.48.101 com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper - getAttribute DEBUG: DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo:CurrMgrEth0Ip:DURATION = 0
[2012-07-27 17:22:32.022-0300 RMI Scheduler (0) DEBUG com.perfigo.wlan.ssl.SSLLog - RMISocketFactory: removed socket: 1871db1 [TLS_RSA_WITH_AES_128_CBC_SHA: Socket[addr=server_primary_ag/10.200.2.103,port=1099,localport=12312]]
2012-07-27 17:22:32.022-0300 com.perfigo.wlan.ssl.SSLLog RMI Scheduler (0) DEBUG - RMISocketFactory:CACHED_SOCKETS_SIZE = 2
[[2012-07-27 17:22:32.022-0300 RMI Scheduler (0) com.perfigo.wlan.ssl.SSLLog - RMISocketFactory:CACHED_SOCKETSE = DEBUG [1e7e7ac [TLS_RSA_WITH_AES_128_CBC_SHA: Socket[addr=/10.200.48.101,port=19660,localport=1099]], 59725 c [TLS_RSA_WITH_AES_128_CBC_SHA: Socket[addr=/10.200.2.103,port=12312,localport=1099]]]
[2012-07-27 17:22:32.022-0300 connection TCP RMI 86 - 10.200.2.103 DEBUG com.perfigo.wlan.ssl.SSLLog - RMISocketFactory: moved socket: 59725 c [TLS_RSA_WITH_AES_128_CBC_SHA: Socket[addr=/10.200.2.103,port=12312,localport=1099]]
2012-07-27 17:22:32.022-0300 TCP RMI 86 - 10.200.2.103 DEBUG com.perfigo.wlan.ssl.SSLLog - RMISocketFactory:CACHED_SOCKETS_SIZE = 1 connection
[2012-07-27 17:22:32.022-0300 connection TCP RMI 86 - 10.200.2.103 com.perfigo.wlan.ssl.SSLLog - RMISocketFactory:CACHED_SOCKETSE = DEBUG [1e7e7ac [TLS_RSA_WITH_AES_128_CBC_SHA: Socket[addr=/10.200.48.101,port=19660,localport=1099]]]
2012-07-27 17:22:32.022-0300 TCP RMI 86 - 10.200.2.103 DEBUG com.perfigo.wlan.ssl.SSLLog - RMISocketFactory:CACHED_SOCKETS_SIZE = 1 connection
[2012-07-27 17:22:32.022-0300 connection TCP RMI 86 - 10.200.2.103 com.perfigo.wlan.ssl.SSLLog - RMISocketFactory:CACHED_SOCKETSE = DEBUG [1e7e7ac [TLS_RSA_WITH_AES_128_CBC_SHA: Socket[addr=/10.200.48.101,port=19660,localport=1099]]]
2012-07-27 17:22:34.122-0300 connection TCP RMI 85 - 10.200.48.101 com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper - isRegistered DEBUG: DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo
2012-07-27 17:22:34.123-0300 connection TCP RMI 85 - 10.200.48.101 com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper - isRegistered DEBUG: DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo:DURATION = 1
2012-07-27 17:22:34.123-0300 connection TCP RMI 85 - 10.200.48.101 DEBUG com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper - unregisterMBean: DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo
2012-07-27 17:22:34.123-0300 connection TCP RMI 85 - 10.200.48.101 DEBUG com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper - unregisterMBean: DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo:DURATION = 0
2012-07-27 17:22:34.123-0300 connection TCP RMI 85 - 10.200.48.101 com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper - createMBean DEBUG: com.perfigo.wlan.jmx.admin.ServerInfo:DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo:CAS:type = MLet, name = casLoader
2012-07-27 17:22:34.123-0300 connection TCP RMI 85 - 10.200.48.101 com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper - createMBean DEBUG: com.perfigo.wlan.jmx.admin.ServerInfo:DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo:CAS:type = MLet, name = casLoader:DURATION = 0
2012-07-27 17:22:34.124 connection TCP RMI 85 - 10.200.48.101 DEBUG com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper --0300 call: DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo:init
2012-07-27 17:22:34.124 connection TCP RMI 85 - 10.200.48.101 DEBUG com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper --0300 call: DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo:init:DURATION = 0
2012-07-27 17:22:34.125 connection TCP RMI 85 - 10.200.48.101 DEBUG com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper --0300 call: DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo:isServerInSync
2012-07-27 17:22:34.125 connection TCP RMI 85 - 10.200.48.101 DEBUG com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper --0300 call: DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo:isServerInSync:DURATION = 0
2012-07-27 17:22:34.125-0300 connection TCP RMI 85 - 10.200.48.101 com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper - getAttribute DEBUG: DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo:CurrMgrEth0Ip
2012-07-27 17:22:34.125-0300 connection TCP RMI 85 - 10.200.48.101 com.perfigo.wlan.jmx.BeanServerWrapper - BeanServerWrapper - getAttribute DEBUG: DefaultDomain:type = com.perfigo.wlan.jmx.admin.ServerInfo:CurrMgrEth0Ip:DURATION = 0
[[email protected]/ * / _primary_ag ~] #.
Thank you
Moises,
I wanted to know if you have followed these steps:
Thank you
Tarik Admani
* Please note the useful messages *. -
I just download Microsoft Office 2010 Professional and then turns off the computer with XP operating system. Once I turned on the computer I got the following message:
Windows could not start because the following file is missing or damaged;
System32\Drivers\Ntfs.sys
You can try to repair this file by starting Windows Setup using the original Setup CD
Select 'r' in the first screen to start repair.
Then, I started the computer with the Original installation CD and press 'r' by following the instructions. Then, I received this message:
1: C:\WINDOWS
Which Windows installation you want to connect?
(to cancel, press enter)
What do I put here?
You must first start on doing something so USB drive a bootable Hiren.
Here's how:
I'll recommend you use Hiren boot CD (it will go also to a flash/USB stick/USB).
It's good for you, because there a lot of tools more on that on the Recovery Console CD of XP, doesn't your administrator passwords and you will not have to futz round in your BIOS, if any afflicted system has SATA drives - Hiren can deal with this.
You will have a bunch of great tools that you have in XP... Recovery Console an editor of the register, adjustable password and an office that resembles Windows XP so you will feel comfortable flexibility.
You can easily copy your personal data (documents, pictures, music) to an external drive.
A system of work, start by downloading the latest version on Hiren Boot CD from here (it is a substantial download but worth it):
http://www.hirensbootcd.org/download/ (look to the bottom of the page).Unzip the Hiren to a folder where you can find it. There's a Hiren. BootCD.15.x.iso that you have to then.
Hiren was instructed to make a bootable USB drive that you can use, but it takes you first burn the .iso to a CD image file and a few other measures, so I suggest another way and here's how:
Download RUFUS 1.3.2 or whatever the latest version is here (read a few things on the page so you can learn more on this subject):
I will warn to be careful that don't accidentally format you a hard disk - don't forget your USB key is in and know what the drive letter! This part makes me still a little nervous, so be careful.
Launch of RUFUS and all default values should be fine for the device, choose letter of your USB drive, quick tag format FAT32, it if you want and in the Format options box, click on the little icon that looks like a CD and a window will open. Navigate through this dialogue to point to the folder that contains the Hiren. BootCD.15.x.iso that you have unpacked above and the box should change to say the image ISO (RUFUS includes the Hiren ISO file).
Double check you have the right device selected in the top (NOT you HDD) click Start, acknowledge receipt of the warning and let it finish (it will take a little time) it copies the files. Hiren ISO is also a good size.
When RUFUS is finished, it will say "DONE" at the bottom.
Put the USB in the afflicted machine and reset/reboot and regardless of the button you press to get a boot menu where you can select the USB drive as first boot device (it's F11 for me). If you do not see a start menu choice, you will need to set your BIOS to boot from USB first instead of the HARD disk.
When the Hiren menu displays, choose the XP Mode of Mini and it will start loading (slowly from a USB key) and finally, you should see a windowsy looking for office. You should recognize the part and feel uncomfortable, but it is not your office - the office of the Hiren!
Remember: you do not start on your hard drive, - you started in the Office of the Hiren.
A way to check the drive for errors is to open my computer and right-click on your afflicted player and choose Properties, tools, error, check checking now... put a check mark in the boxes and then start.
Sometimes that works, then you can also click on start, run and in the type box:
cmd
Click OK to open a command prompt window and enter the following command (assuming that XP is installed on your C drive)
CHKDSK c: /r
This disk check can last a long time (perhaps several to several hours) depending on the size of the volume, the amount of data on the volume and what the disk check finds to do. You may need to run more than once.
-
Update CPU which proved later to be bad. Replaced by original CPU. Re-installed Windows XP Home using a slipstreamed CD that I burned the original non - OEM drive that has Service Pack 2. Integrated Service Pack 3 which I got from the MS. site Everything works well except for Windows Update. The setting seem to be correct in Administrative Tools/Services. The status of the Service is "stopped". When I try to start the automatic updates from Administrative Tools/Services I receive "error 127: the specified procedure could not be found." Also "error 0 x 80240036: could not start the service automatic updates on local computer» Used the range of anti-virus and malware and found nothing. Currently using Avast 7.0.1426. I also used various tools of Fix - It MS nothing helps. Any help would be greatly appreciated. Thank you.
Hello
1. what application or antivirus security suite is installed and your current subscription?
2 Norton (another) or a McAfee application ever installed on this machine?
3. What are the fix applications that you used so far to try to fix this problem?
Try the next method and check if that helps you with the question of the 127 error you receive.
Method 1: Rdding the DLL file by doing the following:
1. Click Start and click Run, in the search box type CMD and press to enter.
2. right click on CMD in the list and click "Run as Administrator".
3. type the following command and press ENTER. Regsvr32 msvcp71.dll
4. close the command prompt window.Method 2: run the file system (CFS) Checker:
(Note: you need an XP installation disk to start the System File Checker search.)
The SFC command is used to detect and resolve problems with the files on Windows XP and Windows Vista computers. This command allows you to launch the Windows File Protection Service and allows you to analyze all integrity-protected Windows files and replace all problematic files identified.
1. click on start, and in the box to start, search type CMD
2. right click on CMD in the list and click "Run as Administrator"
3. type the following command and press ENTER. Sfc/scannow
4. close the command prompt window.For more information on scan SFC (System File Checker), please look in the link mentioned below.
http://support.Microsoft.com/kb/310747
I hope this helps.
-
I get the message RunDLL32.exe, procedure entry point_except_handler4_common could not be located in the dynamic link librarymsvcrt.dll. What should I do?
I had starting problems, boot loop, I think it seems to have been resolved by using the last known good configuration, but I get this popup dialog box. I've not closed for fear that it will start XP looping again.
Hi EddieBryan,
1. did you of recent changes on the computer?
2. do you have security software installed on the computer?
3. when exactly you receive the error message?
Method 1
Check if the problem persists in safe mode and after return with the result.
A description of the options to start in Windows XP Mode
http://support.Microsoft.com/kb/315222Method 2
If the problem does not persist in safe mode, then it is possible that some third-party programs installed on the computer is causing the problem.
I suggest that you configure the computer in a clean boot state and check if it helps.
To help resolve the error and other messages, you can start Windows XP by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.
See section to learn more about how to clean boot.
How to configure Windows XP to start in a "clean boot" State
http://support.Microsoft.com/kb/310353
Reset the computer to start as usual
When you are finished troubleshooting, follow these steps to reset the computer to start as usual:
1. click on Start , then click run.
2. type msconfig , then click OK.
The System Configuration Utility dialog box appears.
3. click on the general tab, click Normal Startup - load all services and device drivers and then click OK.
4. When prompted, click on restart to restart the computer.Method 3
If the previous step fails then I suggest that scan you SFC on the computer that will search the corrupted system files and try to correct them.
The analysis may take some time, so be patient. Windows allows to fix corrupt or missing files it finds. If the information of the installation CD is required to fix the problem, you may be asked to insert your Windows XP installation CD.
Description of Windows XP and Windows Server 2003 System File Checker (Sfc.exe)
http://support.Microsoft.com/kb/310747
You are prompted to insert a Windows XP SP2 CD when you try to run the tool on a Windows XP SP2 computer system File Checker
-
I had a crash dump blue screen, tried solutiions to the problem and told me to go to windows update and download all windows updates. downlownloading all updates failed and I got the error.
Code 80246008
Click on get help with this error and was instructed to go to services and start the background intelligent service services, it gave me the error message;
Windows could not start the background service Itelligent transfer service on local computer. 87 error: The parameter is incorrect
Not very computer savvy! no idea what it all means or what I would do to this topic! Thanks a lot for any help
Try this:
To change or restart the Service (BITS) Background Intelligent Transfer
Open administrative tools by clicking the start
, clicking Control Panel, clicking system and Maintenance, and then clicking Administrative Tools.Double-click Services.
If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.Right click on the service of Intelligent Transfer (BITS) background and then click Properties.
Under the tab general, next to startup type, make sure that automatic (delayed start) is selected.
Next to Service status, check whether the service is started. If not, click Start.
Maybe you are looking for
-
800 HP elite: bios and update cpu
I bought a CPU intel core 2 duo E8600 to upgrade to core 2 duo E7500 of. BIOS version is 786 G 7 V01.02. My PC is compaq 8000 elite small et seq. Chipset Q43/45 I think I need to update the BIOS. When I go to update it has the possibility of widows 1
-
How to redefine the keyboard of the Satellite M30X?
Can someone help me to redefine the keyboard of the Satellite M30X? Unfortunately my mother tongue (i.e. Polish) widely uses the right Alt to produce some unique signs. There are many schools, but I prefer to use thumb to press. Unlike other laptops
-
Lack Win8.1 drivers for HP 250 G3
Hello! I bought a new laptop Model: HP 250 G3 Product number: J7V52PA #ACJ Currently, it does not detect the CD/DVD drive. Surprisingly, I used the CD/DVD just two days ago. Under Device Manager, it is to show that the registry is damaged or the driv
-
HOW TO COMPLETELY CLEAR COMPUTER SYSTEM NOT RESTORE
I NEED TO KNOW HOW TO MAKE MY COMPUTER AS IF IT WAS WHEN I BOUGHT IT. IT'S NOT THE SYSTEM RESTORE FEATURE I WANT IT LIKE THE DAY I TOOK IT OUT OF THE BOX
-
Hi all. I just bought your desktop opportunity for my wife. It's a HP 6000 Pro Compact. The hard disk has been removed by the seller, no hidden partition. No disc supplied. All I have is the thumbnail of product key microsoft labeled "Windows 7 pro O