Check when the video clip has finsihed then gotoFrame

Similar Questions

• Adobe Media Encoder is not looking for additional audio top titles when the video clips to transcoding.

  I have 4 K images with 4 mono audio tracks recorded.  Two of the tracks are dead audio, both are mic on the camera.  I need this audio, synchronize externally recorded in PluralEyes tracks, but that is besides the point.

  When I use SOUL 6.0.2.81 (part of the CS6) to transcode my 4K MOV files in images of 1080 can be used for offline editing, it seems that pick up the first two tracks (dead) and ignore the titles 3 and 4, which contain audio live.

  So far the only solution I found is to put each clip in the first separately.  First recognizes all 4 tracks.  I remove the first two, then export to first to 1080.  It's waaay to strong workforce given the number of shots.

  Any ideas why SOUL would not pick up the two audio tracks?

  Under settings QuickTime Audio, you can try the 'Uncompressed' codec that is multi-channel options?  Then, please use option 'Channel 4 '.  This should export all the four channels.

• How can I choose the image that will appear as 'image of departure', the one that is displayed when the video has not yet been clicked.

  Hello, I would like to know How to Choose the video image which will be appear in the form " ", "boot image", that image that appears when the video has no was clicked yet.» The image all can see before viewing the video.
  Thank you, Pedro Paulo

  You can change the image poster of clips in the icon view. By default, the first image of a clip appears in the thumbnail viewer and in other places in the Bill where the thumbnail is displayed. You can override the default thumbnail by designating any clip image as a poster frame.

  To set a poster frame for the icon, drag the playback slider or shuttle to the desired image and press the keys command + P (Mac OS) or SHIFT + p (Windows).

• The program monitor has yellow cast and red vertical lines when the video is paused

  The program monitor yellow cast and red vertical lines when the video is paused, I'm not reading. I'm not on external or monitor.

  Thank you!!!   works now! If all goes well there will be an update soon.

• First pro does not control the properties of the video clip to match the sequence

  Hello

  I have a sequence in my calendar set at 1920 x 1080 and based on my understanding of the video clips, I place in the timeline should automatically be adjusted in cadence, resolution etc. I looked in my settings to see if an option to do this automatically has been disabled, but can not find it and the timeline is always insert Staples into their native format 1280 x 720. can you tell me what I am doing wrong? You can see in the screenshot that the video is narrowed down, thank you!

  

  This dialog box appears only when you place a clip in an empty sequence. This is to help you create a sequence quickly that meets (or not) your footage.

  To do what you want, go to your Pro first preferences > general and select the check box for the default scale to the size of the image.

  Click OK.

  MtD

• Discoloration video, but not out in the video clip.

  Hello.

  I need to run a video that I can turn over any other flash content.

  Since I also have to add sub titles, I decided to import the video clip into a clip. The clip now has as many frames as the video.

  I added subtitles to keyframing a line of text in the video and synchronized it upward with the film. (it was not really easy...)

  I placed an instance of the clip on my main stage in frame 10. I added an on and and STOP simply would take you to a framework later without the movie clip instance and return to frame 10 once again if you want to see the video again. It worked well.

  To book the elegant transistions I wanted to fade video in and out. So on the main stage in the frame of 10 I placed this action script:

  (+ gave my movieclip the instance name mc)

  Stop();

  Import mx.transitions.Tween;

  Import mx.transitions.easing. *;

  var myTween:Tween = new Tween (mc, "_alpha", Strong.easeIn, 0, 100, 2, true);

  well which mitigates the video when the playback head to frame 10.

  There is another part of the script that should be able to tell the end next to the clip and it melted:

  myTween.onMotionFinished = function () {}

  new Tween (mc, "_alpha", Strong.easeOut, 0, 100, 2, true);

  }

  This however, I can't work:

  (1) if I place this code in the frame of 10, the video goes first but immideately faints again.

  (2) I tried to put 15 images of code at the end of the clip, and that did not work.

  (3) I tried to put 15 images of code at the end of the clip and add _parent.  and who does not.

  It is possible to work and if so, how?

  If this isn't the case, please let me know if you have any other approach proven to suggest.

  ggaarde

  If the first interpolation works in the timeline panel, and then in the same timeline in frame of whattever close to the end you just create another interpolation there.

  myTween = new Tween (mc, "_alpha", Strong.easeOut, 0, 100, 2, true);

• Set the video clip

  Hello I have asked that my topic to another, but this subject was mainly related to another problem.
  
  My question is;
  
  I have 3 x 3 squares square ("box_mc" s movie clip duplicated from 1 film clip "box" on stage)
  
  I want to put a small box (it's the video clip "smallmc") in front of cotyledon (which is one of the other mc "box_mc" already placed on stage). When I click on the big box (I mean "box_mc"), I would like to join an instance of "smallmc" in front of a large.
  
  I have this code in the 'box' mc;
  on {(press)
  If (this.selected == 0) {}
  trace ("checked");
  selected = 1;
  _root.attachMovie ("smallmc", "smallmc" + count, getNextHighestDepth (), {_x: this ._x, FLF: this ._y});
  _root. Count ++;
  trace (_root. (Count);
  } else {}
  trace ("Unselected");
  selected = 0;
  _root. -Count;
  trace (_root. (Count);
  }
  }
  
  but this code puts "smallmc" under "boxmc": ((et 1 plus de problème;))
  
  I have 3 x 3 boxes big; and when I click on a "boxmc" he puts 1 smallmc then I click on another 'boxmc' is 'smallmc' but a previous dissappearing. (but this isn't prior problem I think first I should put small boxes in front of the biggest)
  
  Thank you for your help tips
  

  Don't know if this will help but: getNextHighestDepth() is not autonomous
  method - it is a method of a MovieClip. You need something like:
  this.getNextHighestDepth () instead.

  --
  Dave-
  Adobe Community Expert
  www.blurredistinction.com
  http://www.Adobe.com/communities/experts/

• NO sound when the videos in Windows Movie maker are burned on a DVD

  Original title: Movie maker audio problem

  I just made my first movie maker windows movie with still photos and music. It has previewed perfectly but when I burned the DVD there is no audio on it. What's wrong?

  Hello

  A few quick thoughts on this:

  Have you tried your video playback to test after you created it? Also, if you were to test on a DVD player, check the disc on a PC first to see if it works.

  Also check if the audio track has been added to the timeline of the movie (video).

  Last but not least, experience using audio in a different format and recording your video in a different format.

  Please check the above before you write back to a disk.

• The use of eligible margins in the video Clips, PE11

  1. Is it possible to manually resize a video in first 11 items so that it fits within the margin of safety?  If yes how can I do this?
  2. Also, is it possible to get rid of the side black bars of video clips in PE!  If yes how how to do this?

  Thank you

  Andrew-dd_1937

  What operating system executes your 11 items first?

  1. with the margins of safety on the Edit box monitor and the video clip selected, scaling the image on the screen to fit the area of interest.

  The scale can be done by clicking on the screen to bring up the bounding box of the image, then by dragging on one of the handles of the limit

  box for scale.

  Tip: Depending on the specifications of your TV, you can change the margins of safety to target edit them project Menu/Settings/general

  Title safe area

  Safe action area

  Also, in applied tab/Applied effects Palette/Motion extended effect controls panel, you can uncheck the option constrain Proportion so that

  You can measure the width and height separately.

  
  

  The scale is also possible by selecting the clip of chronology and then using the slider scale found applied effects tab/Applied effects Palette/Motion

  Expanded panel and its properties of scale.

  When you see these black border in Premiere Elements...?

  When you first slide your import to workspace Expert chronology or somewhere else. If export, then you (manually) or the project

  (automatically) have not set the correct project preset to match the properties of the source media. Thus, more information about what is

  happening here.

  Please let me know if I interpreted your question correctly. If this isn't the case, please more details.

  Thank you.

  RTA

• Removal of the video clips in arrays

  Hello

  I have this code in my Flash file:

  for(bubble in bubbleArray){
       bubbleArray[bubble]._y -= 3;
       if(bubbleArray[bubble]._y < 370){
            bubbleArray[bubble].removeMovieClip();
       }
  }

  I wonder, when I remove the film clips should I also be burst their table?

  I have an onEnterFrame function that attaches the video clips and the drives in the array, so I'm afraid that if I don't pop the table will continue to increase in size and slow down the film. This is the case, or will they be automatically removed from the table by the above removeMovieClip() method?

  They will not be removed from the table, but the table can now point to an undefined object.  So if the intention is not to try to deal with in this code, then you must delete them from the table.

• Difficulty in finding the way to determine when the video is finished

  Here's the url for this project:

  http://www.mespinach.com/picNpic/

  A video starts playing when project is loaded.  A button to stop the video, then up a little video on the first video.  During this second full video, I would like to delete and the first video is taken.  As it is written currently I use two to accomplish this task.  If someone could show me ho to the determin when the video is finished I will not need to use both.

  Here is my code:

  Import fl.controls.ComboBox;
  Fl.video import. *;
  flash.filters import. *;

  connection: NetConnection var = new NetConnection();
  var connection1:NetConnection = new NetConnection();
  var stream: NetStream;
  var stream1:NetStream;
  var md_obj:Object = new Object();
  var md_obj1:Object = new Object();

  var dsObject:DropShadowFilter = new DropShadowFilter();
  var bvlObject:BevelFilter = new BevelFilter();

  var vidContainer:MovieClip = new MovieClip();

  var vid:Video = new Video (320,240);
  var vid1:Video = new Video (200,150);

  var one_btn:One = new One();
  var two_btn:Two = new Two();
  var three_btn:Three = new Three();

  one_btn.addEventListener (MouseEvent.CLICK, onOne);
  two_btn.addEventListener (MouseEvent.CLICK, onTwo);
  three_btn.addEventListener (MouseEvent.CLICK, onThree);

  function onOne(e:MouseEvent):void {}
  VID1.x = vid.x + 100;
  VID1.y = vid.y + 100;
  1. Width = vid.width - 100;
  1. Height = vid.height - 100;
  vidContainer.addChild (1);
  Stream.pause ();
  STREAM1. Play ("BnBshortSnd.flv");
  STREAM1.addEventListener (Video.Complete, onComplete);
  }
  
  function onComplete (): void {}
  trace ("I'm here!");
  STREAM1. Close();
  vidContainer.removeChild (1);
  Stream.Resume ();
  }

  function onTwo(e:MouseEvent):void {}
  STREAM1. Close();
  vidContainer.removeChild (1);
  Stream.Resume ();
  }
  function onThree(e:MouseEvent):void {}
  }
  one_btn.x = stage.stageWidth *. 75;
  one_btn.y = 50;
  two_btn.x = stage.stageWidth *. 75;
  two_btn.y = 75;
  three_btn.x = stage.stageWidth *. 75;
  three_btn.y = 100;

  one_btn.filters = [dsObject, bvlObject];
  two_btn.filters = [dsObject, bvlObject];
  three_btn.filters = [dsObject, bvlObject];

  addChild (one_btn);
  addChild (two_btn);
  addChild (three_btn);

  Connection.Connect (null);
  Connection1.connect (null);
  Stream = new NetStream (connection);
  STREAM1 = new NetStream (connection1);
  vid.attachNetStream (stream);
  VID1.attachNetStream (STREAM1);

  md_obj1.onMetaData = metadata;
  md_obj.onMetaData = metadata;
  Stream.client = md_obj;
  STREAM1.client = md_obj1;

  stream.play ("http://jimslounge.com/publicDomain/plan9FromOuterSpace.flv" "");

  
  vidContainer.x = 25;
  vidContainer.y = 25;
  addChild (vidContainer);
  vidContainer.addChild (vid);

  function metaData(info:Object):void {}

  }

  Yes, I've tried and it doesn't work.

  However, you can use polling to check the current Netstream time against the amount of time you get in the metadata and dispatches an event when it is appropriate. Something like this:

  import flash.display.Sprite;
  import flash.net.NetConnection;
  to import flash.net.NetStream;
  import flash.events.NetStatusEvent;
  import flash.media.Video;
  import flash.utils.setTimeout;

  import flash.events. *;
  import flash.utils.Timer;

  var nc:NetConnection = new NetConnection();
  var ns:NetStream;
  var duration: number = 0;
  var vid:Video = new Video (300,300);
  var obj:Object = new Object();
  var videoURL:String = "test.flv;

  nc.objectEncoding = 0;
  nc.addEventListener (NetStatusEvent.NET_STATUS, onNCStatus);
  NC. Connect (null);
  addChild (vid);

  function onNCStatus(event:NetStatusEvent):void
  {
  Switch (event.info.code)
  {
  case "NetConnection.Connect.Success":
  NS = new NetStream (nc);
  NS. Play (videoURL);
  NS.client = this;
  startPoll();
  vid.attachNetStream (ns);
  break;
  }
  }

  Poll: var timer = null;
  function startPoll()
  {
  if(Poll==null) {survey = new Timer (500) ;}}
  poll.addEventListener (TimerEvent.TIMER, pollHandler);
  Poll.Start ();
  }
  function stopPoll()
  {
  if(Poll==null) {return ;}
  Poll.Stop ();
  }
  function pollHandler(event:TimerEvent)
  {
  trace (ns.time, "of"), duration;
  If (ns.time > = length)
  {
  stopPoll();
  dispatchEvent (new Event (Event.COMPLETE));
  }
  }

  function onMetaData(info:Object):void
  {
  trace ("metadata: duration =" + info.duration + "width =" + info.width + "height =" + info.height + "framerate =" + info.framerate);

  set the duration, so we can check the completion status
  Duration = info. Duration;
  }

• Skip (project) to check, because the apk file has not changed.

  Hello all, I get the message 'Skip (project) to check, because the apk file has not been modified' in the error log when I'm checking an Android APK. Since I donot have required a device or a simulator (lack of processor), I'm not able to test the signed .bar file generated by ignoring the message above.

  Please can anyone suggest a solution for the question do face. Thanks in advance.

  Hey there,

  I see something like:

  "Skip ProjetTest to check, because the apk file has not changed."

  in my Console, but not in the error log.

  If it is in the console, it's just a normal journal letting you know that the tools didn't need to check again because the project, including the manifesto, has not changed quite significantly between runs you need to double check.

  Justin

• Adobe Edge animate event handler when the video starts to play

  Now I use

  document.getElementById('myVideo2').addEventListener (myHandler, 'ended', false);

  If I want to add a new event after a video was played.

  How can I check when a video actually started playing and see you on the screen? I need this because I want to add some additional animations around the video that must be triggered exactly with the first images from the video.

  I found the solution:

  Video.onplaying = function() {}

  Console.log ("video is now loaded and play");

  }

• Autohide the HTML5 player controls when the video is suspended as well.

  The HTML5 player controls will hide after a few seconds when a video begins to play, either click on a YouTube video link, or when the video is taken from the break. However, the controls will be visible as long as the video is paused. The controls are quite obstructive due to certain times when I need a break to see a certain thing in the video in a very short time-frame but got covered by the player controls and disappears when resume playback. So, how to make controls of the HTML5 to hide also automatically a few seconds after the video player is paused or instantly hides when the mouse is outside the area of the drive?

  Hi frfxuser, the embedded player works the way you describe, but YouTube uses scripts to customize the player controls, so you would need a specific YouTube 'hack' to hide the application.

  One possible approach would be to use a Bookmarklet, which is a snippet of JavaScript that you can save on your bookmarks bar or Bookmarks Menu for quick access. The script can assign controls ' view: no ', then when you click on the new button, remove this rule so they show once again and you can return to normal.

  If you want to try it:

  A time of installation:

  (A) select and copy the following script:

  javascript:var s=document.getElementById('stylehidecontrols'); if(s){s.remove();} else{s=document.createElement('style'); s.id='stylehidecontrols'; var r='#movie_player .ytp-gradient-top, #movie_player .ytp-chrome-top, #movie_player .ytp-progress-bar-container, #movie_player .ytp-chrome-controls{display:none !important}'; s.appendChild(document.createTextNode(r)); document.body.appendChild(s);} void 0;

  (B) right click a place on the bookmarks Menu or Bookmarks Toolbar where you want to save the script and choose new bookmark

  (C) in the location box, paste the script, and then in the name box, type something you remember as YT hide and click the Add button

  To use the bookmarklet:

  After clicking on pause, click on the bookmarklet to run the script on the page and hide the controls.

  You can return to the player by clicking on it, but if you want comprehensive controls, click on the bookmarklet button again to remove the hack of the page style.

• video in a frame, the video clip of hole to play before the next frame whant

  I know that I can write:
  
  on exitFrame me
  go to the section
  end
  
  but I want him to go next frame when hole video clip is played. jargon for the maneuver to that frame when he played the video.
  
  I am whant to jargon of wright:
  
  On exitFrame me
  hold the framework for X seconds
  end
  
  ore something that make the frame to hold for as long I want it.

  Thanks, nice work