60 d-opening problem when shooting video

Similar Questions

• When shooting video, it is necessary to turn off Steadyshot when the camera is on a tripod?

  When shooting video with a NEX - 5n, 6 or 7 on a tripod, it is necessary to disable the Steadyshot in the menu, or is the camera supposed to sense that she is on a tripod (like the small Sony Hv9x)? I ask because sometimes my video tripod with these cameras mounted seems to have a slight pulsation or flutter, I can't explain.

  The SteadyShot function does not serve a purpose, while the camera is mounted on a tripod. Given that the tripod is stationary when you take a picture, there is no excessive movement to the camera. It is not necessary to use the SteadyShot function in this situation.

  Sometimes involuntary blur can occur when you use SteadyShot, while the camera is on a tripod.

  If my post answered your question, please mark it as an "accepted Solution".

• Camera stay focused when shooting video

  How do you keep the Rebel T3i in short, when shooting video of moving objects that are moving towards or away from the camera? I understand the Nikon D5100 has continuous autofocus, but the Canon EOS Rebel T3i doesn't have such a feature.

  Hi jla930,

  The AI Servo AF mode is for moving subjects when the focus distance continues to change. While you hold down the shutter button halfway, the topic will focus at all times.

  To access this mode, press the arrow key to the right (AF) and choose "AI Servo", as shown below:

  

  • Exposure is set at the moment the picture is taken.
  • The selection of the point AF is automatic, the camera first use the central AF point to focus. During the development automatic, if the subject moves away from the center of focus, followed continues as long as the subject is covered by another area of focus.

• ANY way to monitor audio files on a 70 d when shooting video?

  I know there is a meter if you go to the menu, but I want to follow live with headphones on what comes out, not what is happening.  I can monitor the entry but want to make sure that the output is not saturated.  Any advice would be wonderful.  I tried to connect the A / V cable of the camera and audio surveillance there during the filming, but it does not work.  I know that the HDMI audio is muted during recording, as well.  This isn't a minor issue for those of us who want to ensure that we have sound quality, I use a mixer and multiple sources during the shooting.

  Summersond,

  It is not a method to produce the audio signal only the EOS 70 d with headphones while recording video.  We apologize for any inconvenience this may bring you at this time.

• Major problem when the video is paused at the PPCC

  Suddenly, this is what my screen looks like when I hit pause on any kind of video. It's nothing to do with the original files, because they play in other players. Anyone else seeing this?

  

  Hi Steve,.

  Please see this FAQ: FAQ: Why am I getting yellow and red lines running through my images on pause?

  Thank you

  Kevin

• no noise when shooting video!

  Help! I bought a Rebel T3 just prior to moving overseas (and I am no where near the store where I bought it) and I started to teach me today how to use the video function, I did a few video tests and there is no sound! I have the sound recording is enabled in the menu. I don't know what to do. Maybe there is another setting I don't know. Well, I hope that I don't have a faulty camera, as I will not be back to the United States for a year! Help!

  You probably have the playback volume turned down.

  

• Treo 800w - no sound when recording video

  When I record a video with my treo 800w, is not capture all the sounds. Am I missing something? I can't find a setting to fix this problem, if it exists. This phone record sound when shooting video? If so, anyone know how to get there?

  I had going. I feel a bit stupid, but just in case someone did the same thing as me... If you have the volume button disabled on the top of the phone does not have his back. Imagine that. I have the sound away at my job and usually leave it off. I always thought of him as a ringer switch not a complete audio switch. My bad. It turns out all my clips that capture sound. Sorry for wasting your time to Arnaud. I appreciate the help.

• I have problems when I minimized windows and try to open a new window will open all minimized windows as well as the new window. He just changed when mozzilla updated. He has not done this before the update.

  I have problems when I minimized windows and try to open a new window will open all minimized windows as well as the new window. He just changed when mozzilla updated. He has not done this before the update. Before the update if I had minimized windows they would be reduced when I opened a new window. Need help please, I guess it's just a setting somewhere but I can not understand where is the parameter. Thank you jason

  http://about.ask.com/APN/toolbar/docs/default/FAQ/en/FF/index.html#Na4 is Ask FAQ on how to uninstall the toolbar.

• There is a problem when I click on the tab '+' to 'open a new tab' nothing happens. It allows to open new tabs, and now it does nothing.

  There is a problem when I click on the tab '+' to 'open a new tab' nothing happens. It allows to open new tabs, and now it does nothing. Even when I go to 'File' and 'New tab' it still does nothing. The only time wherever I can get a new tab to open is if I go to 'Help' and click "Firefox Help" then opens a new tab with firefox help.

  Please disable or uninstall the extension "Ask Toolbar". He has a known compatibility issue with the latest update of Firefox.

• Windows8 tile problem - when I click on a tile, it opens, then closes instantly...

  Windows8 tile problem. When I click on a tile, it opens, then closes instantly. I have studied the site of Microsoft to solve this problem, but all attempts have failed. I tried to click with the right button on tile and used the feature, turn off, then I was instructed to shut down the computer, restart the computer, click with the right button on tile and select turn on, it did not work. Microft offers a COMPREHENSIVE ANALYSIS of the SYSTEM using Norton. I did and it did not resolve the tile not not opening problem. Can someone help me solve this situation. Is this a common problem with Windows 8?

  My problem has been resolved. I down loaded Windows updates more added Bing bar.

  I can open the tiles now.

  Larry

• I have problems when I shoot in raw + jpeg. RAW files seem corrupted!

  I have problems when I shoot in raw + jpeg.  It seems that the raw files get corrupted.  I shot raw without a problem.  It's only when I shoot in raw + jpeg.  Raw files will not appear in Photoshop elements.  I installed the Canon software and could see all the raw files; However, I noticed that when I tried to post some full screen they would not show.  I also noticed that these block-ish look raw files.  They appear more digital research.   Is there a specail required in RAW + jpeg map?  I formatted ones I have before their use.

  Thank you all for watching my post.  I shoot with a 60 d using Photoshop Elements 10.  Finally, I called Canon tech support and found out it was the card reader that was causing problems.  When I used another card reader, I was able to transfer the Jpeg and raw files.  They advised me to connect the camara to the computer to transfer files.  I learned to use a card reader and have for years.  It was the first time, it caused me problems.

• Audio problem when I capture video in Movie Maker

  Hello

  I have an audio problem when I capture video in Movie Maker (version 5.1, using XP).

  The sound is out of sync, the sound is played several seconds before the video.

  His 18 months ago that I tried to capture video with movie maker.  y at - he miss an update

  What can I do to solve this problem, please

  Hello

  I suggest you according to the question in this forum and check if that helps:

  http://www.windowslivehelp.com/forums.aspx?ProductID=5

  It will be useful.

• How to solve a problem when the windows setup program does not open a program, says I need to install it. and an error message 1706

  How to solve a problem when the windows setup program does not open a program, says I need installation cd and a 1706 error message happens.

  Hi PAtwoodwu,

  1. what program are you trying to install?

  2. did you of recent changes on the computer?

  3 does happen with all programs?

  Check and make sure that the Windows service install is running on the computer.

  (a) click on start to reduce this includes this image, click run , type services.msc , and then press enter to open Services.

  (b) right click on the Windows Installer service and then click Properties.

  (c) if the box Startup type is set to Disabled, change it to Manual.

  (d) click on OK to close the Properties window.

  (e) right click on the Windows Installer service and then click Start. The service should start without errors.

  (f) click on the file menu, and then click exit.

• I'm having a problem when I open My Documents, the window opens and looks great, I can go to any folder and open it and all is well again

  I'm having a problem when I open My Documents, the window opens and looks great, I can go to any folder and open it and everything is well again, however if I then opened my pictures, and then open a file... some files, less than a second after they are open [and the pictures show] will make the window My Documents to disappear also all the desktop icons disappear the computer will then will reset it self , add all the icons and waiting for me to do something.

  I have no idea where to start looking for this problem.
  I do not have a disk operating system is
  When I try to save an attachment, as in email, Explorer opens, I choose a location to save it, then immediately Expolrer closed! I can't save an attachment

  Hello Philipwk,

  Thank you for your message.  Please provide comments to a few questions so that we can better help you get your problem solved.
  1. are there recent changes made to your system, namely the hardware or the software?
  2 How long present this problem?
  Here are two methods to try, please try in order.  If a system restore fix the problem, do not perform step 2.
  Step 1:
  Run a system restore to before that was the problem.  Please click the link below to get instructions from system restore.
  http://www.Microsoft.com/windowsxp/using/helpandsupport/getstarted/ballew_03may19.mspx
  Step 2:
  Create and test the new user profile.
  Click 'Start' > right click on 'My computer' > select 'manage '.
  Double-click 'Users and groups' > below, select "users".
  In the pane, right click on the space empty and select 'new user '.
  Enter the identification information you will retain and select OK
  Right-click the user account that you just created, and then select "Properties".
  Select the tab "member of" > click on "add".
  Type Administrators in the field and select "check name".
  Once administrators is added, click OK
  Disconnect and connect again your new account, opening pictures with your new trial account.  You can even browse your other photo folder by going to the following location:
  c:\Documents and Settings\ (user account) \My Documents\My images
  If it works, your profile has been altered somehow.  You can then start to copy your data from your old profile to it.
  Please let us know if it did or did not work for you.
  See you soon

  Engineer Jason Microsoft Support answers visit our Microsoft answers feedback Forum and let us know what you think.

• Why I don't have any audio when I video chat with Skype or facebook? I don't know how to fix this problem in my lap top

  When I video chat with my children, weather it is Skype or facebook, they can hear me but I can't hear them.

  Hello
  1 did you change on your computer before this problem?
  2. you receive an error message?
  3. audio is working properly in other applications?
  Follow the suggestions and see if it helps.
  Method 1
  Run the fix of the article.
  Tips for solving common audio problems
  http://Windows.Microsoft.com/en-us/Windows-Vista/tips-for-fixing-common-sound-problems

  2 process
  Follow the steps in the article.
  No sound in Windows
  http://Windows.Microsoft.com/en-us/Windows/help/no-sound-in-Windows

  Method 3
  Check to see if the problem exists in a clean boot state.
  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/kb/929135
  Note: After a troubleshooting follow step 7: reset the computer to start as usual

  Reference:

  https://support.Skype.com/en-us/FAQ/FA897/why-can-t-the-other-person-hear-me;JSESSIONID=273F71FEEECEC3441168745C5312ABFE

  You also question post in forums Facebook for assistance on the Facebook problem.

  http://www.Facebook.com/help/community