checkbox check based on conditional

I want the "done" checkbox itself automatically check if the other two numbers of columns are equal.

I can't add one if exposed to a checkbox cell...

Once it becomes a checkbox it will not take a formula...

How about something like this?

You can find a symbol check box via Emoji show and symbols.

You may need to check the menu entry display in the menu bar in system preferences > keyboard > input methods:

Tags: iWork

Similar Questions

Check boxes are displayed incorrectly < input type = "checkbox", "checked" > in 4.0.1 when they are fine for the same page in 3.6.17

Check boxes are not displayed properly checked < input type = "checkbox", "checked" > in 4.0.1 when they are fine for the same page in 3.6.17

Maybe you can try to use controlled instead of "checked".

enable and disable a group of checkbox checked and unchecked, a checkbox

Hello
I have a form of livecycle. I want to enable and disable a group of checkbox checked and unchecked, a checkbox. can u pls help me?
Thank you
Ali

Please check that you follow the procedure...

Create a script object to create the toggleAccess function

LiveCycle ES2 * Adobe LiveCycle Designer ES2 (How to create a script object)

LiveCycle ES2 * Adobe LiveCycle Designer ES2 (How to reference an object of script PDF Forms)

You can download the form, you sent me with the script object implemented as explained here:

936968a098afc8ab320334a2c0ab4c73.PDF - Google Drive

Based where conditional clause...

dear team,
i have following code..

Declare
  gv_flag1 Varchar2(1)   := 'N';
  gv_flag2 Varchar2(1)   := 'N';
  gv_flag3 Varchar2(1)   := 'N';
  all_where1       Varchar2(250);
  all_where2       Varchar2(250);
  ALL_where3       Varchar2(250);
  V_QTY           Number;
Begin
  If gv_flag1 = 'N' Then
     all_where1 := 'AND '||'V.OWNER = ''PROD''';
  End If;
  DBMS_OUTPUT.PUT_LINE(all_where1);
  
  If gv_flag2 = 'N' Then 
     all_where2 := 'AND '||'V.OPERATION NOT LIKE (''10%'')';
  End If;   
  DBMS_OUTPUT.PUT_LINE(all_where2);
  
  If gv_flag3 = 'N' Then
     all_where3 := 'AND '||'V.OPERATION NOT LIKE (''07%'')';
  End If;
  DBMS_OUTPUT.PUT_LINE(all_where3); 
   
  --select based on conditions..
End; 

NOW I want where conditions in select statment to be conditional...

which means if flag1='N' and flag2 = 'N' then use both all_where1 and all_where2 in *where* clause statement...
if flag1='N' and flag3 = 'N' then then use all_where1 and all_where 3 in *where* clause of select statement...
if all there flag = 'N' then use all_where conditions in *where* clause of select statement...

i have 3 flags, which means total of 9 combinations,  is there any simpler way to do such kind of thing??

please assist me

nic

Nicloei W wrote:
Hi Jeenesh,

What happens if Flag2 = 'Y' and Indicateur3 = 'Y' in this case, I want only the condition with Flag1

concerning
NIC

SQL> ed
Wrote file afiedt.buf

  1  Declare
  2    gv_flag1 Varchar2(1)   := 'N';
  3    gv_flag2 Varchar2(1)   := 'Y';
  4    gv_flag3 Varchar2(1)   := 'Y';
  5    --all_where1       Varchar2(250);
  6    --all_where2       Varchar2(250);
  7    --ALL_where3       Varchar2(250);
  8    lc_query varchar2(1000):= 'select count(*) from test v ';
  9    lc_where varchar2(500) := ' where 1 = 1 ';
 10    V_QTY           Number;
 11  Begin
 12    If gv_flag1 = 'N' Then
 13       lc_where := lc_where||' AND V.OWNER = ''TEST''';
 14    End If;
 15    If gv_flag2 = 'N' Then
 16       lc_where := lc_where||' AND V.OPERATION NOT LIKE ''10%''';
 17    End If;
 18    If gv_flag3 = 'N' Then
 19       lc_where := lc_where||' AND V.OPERATION NOT LIKE ''07%''';
 20    End If;
 21    lc_query := lc_query||lc_where;
 22    dbms_output.put_line(lc_query);
 23    dbms_output.put_line('-----------');
 24    execute immediate lc_query into v_qty;
 25    dbms_output.put_line('Count: '||v_qty);
 26* End;
SQL> /
select count(*) from test v  where 1 = 1  AND V.OWNER = 'TEST'
-----------
Count: 3

PL/SQL procedure successfully completed.

Dynamic Action condition javascript checkbox.checked count > 0

Hi all
I'm stuck with a condition of the dynamic action. I have the following:
$("#P302_COMPANY").val () .length > 0 & & ($("#P302_DEPARTMENT").val () .length > 0 | $("#P302_PRODUCT").val () .length > 0 | $("#__P302_INDUSTRY__").val () .length > 0)
What would be nice if all items were areas of text, but P302_PRODUCT and P302_INDUSTRY are the lists box, and I want to check if 1 or more values in the list are checked... but I can not work how to do it... any ideas?

Thank you
TSD

Hi Tod

then three is still fair to say if the element has a checked value?

Yes, but not straight forward. You need a javascript routine that traverses the dom looking for items of type box to the appropriate div, and then, for each item in the loop, set a flag if the checkbox is set (assuming that you only 1 of the total updated check).

Another way would be to create a hidden page element, say P302_PRODUCT_CHECKED, then put a dynamic action on the element of the page P302_PRODUCT with the onclick event and a condition that if the box return value is not null, then the real event will mark the beginning session state (PL/SQL Expression - apex_util.set_session_state) and the value for P302_PRODUCT_CHECKED to say 'Y '. You would need a false event to set P302_PRODUCT_CHECKED to null if the checkbox is not set. You can then test #P302_PRODUCT_CHECKED == 'Y '.

Concerning

Paul

Definition of checkbox "checked" or "unchecked" based on earned null or not null
This is probably a simple question, but I can't understand how it works.

I have a form used to display/change a retrieved row in a table. Some fields are check boxes. In the table, the values are either 'x', or null. In my case, it is 'null' or 'not null '. How can I implement the checkbox for show as enabled or disabled once the line is read based on the value of the null or not null field?

Thank you!
Hello

If you are really sure that your value 'not null' will always be 'x', then you can simply create a checkbox field that is bound to the DB column and have the LOV as follows:
```
STATIC:Checkbox Text;x
```
If you want to implement on the NULL / NOT NULL test, then configure the LOV in the same way, but add the following code for the calculation of calculation of post for the field:
```
CASE WHEN :P3_COMM IS NOT NULL
  THEN 'x'
  ELSE NULL
END
```
where: P3_COMM is the name of the field box on the page.

-Jennifer

Balance sheet of the conditionally show by checkbox checked
All,
I have created 8 check boxes:
'Source '.
STATIC2: a 1, b; 2, c; 3, d; 4, e; 5, f; 6, g; 7, h; 8

According to c (checked) I want to show a report.

Status of the report:
"Function from PL/SQL body returning a Boolean".
Start
If (: c = '3') then
Returns true;
on the other
Returns false;
end if;
end;

But it does not work.

Any help appreciated,
See you soon
Lucio
You must call the name of your box, not: c If your box has been named P1_SOURCE your code so as:
```
begin
   if (:P1_SOURCE= '3') then
      return true;
   else
      return false;
   end if;
end;
```

Checkbox validation based on the selection of the values LOV
I'm trying to validate a checkbox custom on the opportunity page, based on the selection of the values LOV.

For example only when the user selects 'rating = A', the box should be able to select and save.

If the user selects other that 'A' in the field assessment, the box should not save.

or

Is it possible to do, the READ ONLY checkbox, enable only when the side 'A' is selected.

Any thoughts / help on this.

Thank you, Kumar

Edited by: user10833334 may 4, 2010 06:43
There is no function to make a read-only field based on the contents of another field, it is not an option. I will list my thoughts on how you might handle this below.

-Option 1: I recommend that you use validation to manage it. I don't know exactly to your needs, but you could write a field validation that checks to see if the flag is checked and rating <>has and sends an error message to the user, if it is not. The user would not be able to save the file until it Unchecks the box or sets the side = A.
Advantages: User gets a message explaining the problem with the data and is forced to fix it before you save it.
Cons: Requires interaction from the user to save and if they do not pay attention, the data may be lost if they cancelled without saving the changes.

-Option 2: Another option would be to use the workflow to validate the registration. In this scenario, you can create a workflow that determines whether the field is out of adjustment, and if it is not correctly set, the workflow would update the box accordingly. In this scenario, you would use the 'Actions if Condition is False' also to inform the user that the flag cannot be controlled unless the side =. Then, you must set the Action "Update the values" update the uncontrolled field.
Pros: Manages the work without user interaction.
Cons: The con in this case, is that there is no workflow 'Before NEW record saved' trigger, so it is likely that the user sets the value incorrectly when creating the folder and it would stay like that until they update the record again.

Some people might argue that there is another option that uses the functionality of dynamic page layout to make the field read-only, but this isn't a good option. You would need to convert using the Type of the opportunity in a way that would make use of the possibilities of lourdes for your users and I mention it only to you recommend to avoid his review completely.

Good luck and let me know if you have any questions.
Thom

sum. If to check two different conditions

Hello

I have this worksheet to work overtime, I was paid to check that it appears in my payslip.

Is it possible to use SUMIF or something similar to see if the checkbox next is pressed, then return the values in another table but divide it into different rates?

By using the SUMIF calculation general I can return the total number of hours back but not sorted into the different rates. Not sure if this is a bit complicated for numbers.

Thanks in advance

Rob

Use the sumifs() function which will add lines to a column when corresponding lines in the other column corresponding to ALL the conditions

for the Table «Payslip calculator»

change the first column to remove the 'x' and make the value correspond to those in the "Rate" column in the table "exceptional overtime."

B2 = SUMIFS (hours additional Outstanding::D, Outstanding::H, TRUE of overtime, hours additional Outstanding::E, A2)

It's shorthand dethrone select cell B2 and type (or copy and paste it here) the formula:

= SUMIFS(Overtime Outstanding::D, Overtime Outstanding::H, TRUE,Overtime Outstanding::E, A2)

Select cell B2, copy

Select the cells B2 at the end of column B, paste

Chronology of trigger has to play based on conditional

I'm working on a project in which I have four draggables, able to receive four and four default droppable in the composition. Once these four individual draggables were abandoned on the beneficiaries of their point of view I want to trigger a symbol to play his chronology based on a conditional statement that checks that all four draggables were deleted correctly.
To do this, I pushed the four movable in a table after groups that they were interrupted and movable destroyed using the jquery ui library. I know that the table is filled because I get the appropriate groups in the console and the length of the table.
I tried to make a loop for to analyze the table and feed than an if statement to verify that it has four points and trigger the chronology of symbol reading. Only problem is that it doesn't. Do you have advice on how to solve the problem of the code below?
correct=[];
//DRAGGABLE RIDE TO AIRPORT GROUP
sym.$('rideGroup').draggable({           containment:'parent',           scope: 'task3',           opacity:.9,           revert:'invalid',           zIndex:6 });
//Make the targetRide area droppable and accept the Ride to Airport Group
sym.$('targetRide').droppable({
      scope:'task3',
      drop: function(event, ui){
           accept: 'rideGroup'
           tolerance:'fit'
           draggable:'destroy'
           correct.push('rideGroup');
      }
});
sym.$('defaultRide').droppable({
      scope: 'task3',           drop: function(event,ui){
           accept: 'rideGroup'
           }
     });
for(var i=0; i <= correct.length; i++){
      if(i === 4 && correct.length === 4){
           sym.getSymbol('Animation').play('greatJob');
      }else{           sym.getSymbol('Animation').play('notRight');
   }
};
If I take the line code sym.getSymbol in the conditional statement and place it where the push instruction has, each of the draggables play the timeline after a fall. We're not that good. We have the timeline plays that once all four of the draggables were dropped. I've included the code for one of the moveable and sets able to receive here for reasons of space only.
Thanks for any help you can provide.

K lies in case handler - so when the event occurs, k is incremented and when it equals the number of events (the draggables that are well placed) it does what you want it to do, in this case an animation. This could be used for something else if you wanted to.

The position can use left, high, mid, low, Center... I would not add pixels to it. It is best to get the placement in this way. If you have images that have limits of the strange, you could use transparent droppable on images. Hope it makes sense.

checkbox selection based on the name within a field

I have a PDF form
the form has 2 selections of checkboxes. M or F (male or female)
I can get a field to fill with M or F or man or woman, but how do I get a checkbox to select M or F based on
What comes in a field?

You can use the custom validation script of the--of the text field to change the check box, for example:

If (event.value == "Male") this.getField("CheckBoxMale").checkThisBox (0, true);

Else if (event.value == "Female") this.getField("CheckBoxFemale").checkThisBox (0, true);

Highlighted report items when Checkbox checked
Hi people,

I have APEX report at the following page:

! http://img222.imageshack.us/img222/7448/tradescreen1.jpg!

The report is based on this query:
```
SELECT id,
       ticker,
       deal_date,
       deal_type,
       no_shares,
       price_per_share,
       commision,
       stamp_duty,
       APEX_ITEM.CHECKBOX( 1, id, 'UNCHECKED' ) AS group_ind,
       DECODE( trade_group_id, NULL, 'NO', 'YES' ) AS grouped
  FROM trades
 WHERE account_id = :P2_ACCOUNT_ID
```
Whenever I check a box, I would like to than the related line to highlight (in a color light gray or green, ideally). I am aware that I will be on the territory of Javascript here, and I know I have to put the Javascript code in the Page header. I think I know how to do this.

The question I have is, how would I go about the reference to the line that is associated with the box checked, and where I would put the call to the Javascript method to highlight the line?
Hello

You can select the checkbox appears on by entering the the checkbox DOM tree until you get to the TR tag that contains. Because of the hairstyle on an IR, must then change the background color of all the cells on the line. To trigger the highlight, you can add an attribute to the CHECKBOX function call:

Change:
```
APEX_ITEM.CHECKBOX( 1, id, 'UNCHECKED' ) AS group_ind
```
TO:
```
APEX_ITEM.CHECKBOX( 1, id, 'UNCHECKED onclick="hiliteRow(this);"' ) AS group_ind
```
On your page, in HTML header, add:
```
<script type="text/javascript">
function hiliteRow(x)
{
 var p;
 var c;
 var cell;
 if (x.checked)
 {
  c = "green";
 }
 else
 {
  c = "#EFEFEF";
 }
 p = x.parentNode;
 while (p.tagName != 'TR')
 {
  p = p.parentNode;
 }
 for (cell = 0; cell < p.cells.length; cell++)
 {
  p.cells[cell].style.backgroundColor = c;
 }
}
</script>
```
Just the 'this' in the javascript code identifies the current object - in this case, the checkbox is checked/unchecked. This script checks whether or not the checkbox is checked and determines the color to use on the line. Then, he starts from the item box (x) and search the node of that parent. If it's not a TR tag, it repeats the process until it reaches the TR tag. Then, he travels all cells with this TR tag and defines the background color.

As an example of this: [http://htmldb.oracle.com/pls/otn/f?p=267:95]

Andy

Groovy aggregate function based on condition

Hi all
I use jdev 12.1.3.0.0
I've set up an aggregate function in my master EO as explained in the blog
https://blogs.Oracle.com/ADF/entry/using_groovy_aggregate_functions_in
I need to add a condition to the number of records based on an attribute of the object of details view. Algorithm for the use case is
detailsAccessor.count ("SmsId")
where detailsAccessor.MessageType is equal to "file."
Could you help me write an expression to achieve this functionality.
Thank you
Mozakkir

All aggregate in groovy functions accept a groovy as a parameter expression.

So instead of detailsAccessor.count("SmsId") you can try something like: detailsAccessor.count ("MessageType is 'Applicant'")

Or convert sum() like this: detailsAccessor.sum ("MessageType is"Applying"? 1: 0 ")"

Dario

PDF form check boxes under condition

Hello.
I'm building a pdf form in Acrobat 8 Professional. I want to add JavaScript to 3 checkboxes to achieve the following objectives:
If the box 1 or 2 is checked, uncheck the box 3; and if the 3 box is checked, uncheck the 1 and 2.
It seems simple, but I have not been able to find a solution in the Acrobat guide or online. I have no other than copy and paste Javascript experience, so I'm not sure I use the right language to research. If anyone can provide guidance, I would be very happy.
Thank you very much!

You can create a function in a JavaScript script at the level of the document and call it in the mouse event to the top of each box, something like:
```
// Document-level function
function cbControl() {

    // Get a reference to each check box
    var f1 = getField("cb1");
    var f2 = getField("cb2");
    var f3 = getField("cb3");

    // Uncheck cb3 if cb1 or cb2 was selected/deselected
    if (event.target === f1 || event.target === f2) {
        f3.value = "Off";
        return;
    }

    // Uncheck cb1 and cb2 if cb3 was selected/deselected
    if (event.target === f3) {
        f1.value = "Off";
        f2.value = "Off";
    }
}
```
Replace "cb1", "cb2", "cb3" the names of the checkboxes that you use.

Here is the code for the mouse upward in the event of each check box:
```
cbControl();
```

join two tables and results to display checkboxes checked... loop david powers please?

Summary
two tables:
Table 1 categories
Table 2A categories that someone has selected
HTML form that updates the user's data:
form should show all the options in the category dynamically in table 1
and also to display the check box of the category as controlled dynamically if the person chose by table 2
The nuts and bolts
Attempt 1
My sql:
SELECT cat.id, cat.category, mcat.category as mcategory
THE CAT of categories, members_categories mcat
WHERE mcat.member_id = ' "." $_GET ['id']. »"
ORDER BY category ASC
(run on its own, all categories of table 1 are shown twice and the results of table 2 is a total cluster.)
area of the form with checkboxes:
<? PHP {? >}
< input <? PHP if (!) ((strcmp($row_rsCategories['mcategory'],$row_rsCategories['id'])))) {echo ' checked =------'checked\' ' ;}?} > name = "category []" type = "checkbox" value = "<?" PHP echo $row_rsCategories ['id'];? ">" / > <? PHP echo $row_rsCategories ['category'];? > < br / >
<? PHP} while ($row_rsCategories = mysql_fetch_assoc ($rsCategories));? >
what I have here results:
all categories displayed twice with selected categories of table 2 verified = by the results of sql when running alone
Attempt 2
My sql:
SELECT cat.id, cat.category, mcat.category as mcategory
CAT categories
LEFT JOIN members_categories mcat WE mcat.category = cat.id
WHERE mcat.member_id = ' "." $_GET ['id']. »"
ORDER BY category ASC
(run on its own, all categories of table 1 who have a match in the table 2 and none of the other in table 1 shows)
area of the form with checkboxes:
even the first attempt
what I have here results:
all categories selected in table 2 shows and checked, and no other choices of table 1 = by the results of sql when running alone
Attempt 3
My sql:
SELECT cat.id, cat.category, mcat.category as mcategory
THE CAT of categories, members_categories mcat
WHERE mcat.member_id = ' "." $_GET ['id']. »"
GROUP BY cat.id
ORDER BY category ASC
(running his own, all the choices in the category of table 1 are displayed, however, the mcategory column displays the lowest category numbered (same one) against all of these options rather then correspond to their.)
area of the form with checkboxes:
even the first attempt
what I have here results:
all choice of category in table 1 are displayed, however, only the first category in table 2 (which in this case is the lowest number) is marked as checked with the checkboxe, even if there is more then one category in table 2 = by the results of sql when running alone
so, can anyone help? I'm just banging my head against the wall here is something missing that should be obvious, because the sql is not giving me what I need to work with the form in a loop region. Perhaps another approach should be taken and I have change the loop as well, but I think that this can be resolved with the sql. Thanks in advance.

Well, you can use two separate sql queries...

one with the names of the categories

and the second nested with the loop that references the id of category in table 1 to pair with table 2

checkbox check based on conditional

Similar Questions

Maybe you are looking for