Balance sheet of the conditionally show by checkbox checked

Similar Questions

• How to print a balance sheet in the currency EUR

  Hello
  
  Can someone help me with this please
  
  I have "BOLD" balance sheet * fat * report defined under "BOLD"big book * fat * responsibility.
  I want to change the currency from USD to EUR. This report is always printed in USD currency. I edited the currency and changed into EUROS in italics other Options + italic + article to define-> report, its saved the file, but when print them values are not converted to the euro. Can someone help me and tell me if I need to check/modify any other column?
  
  Thank you
  
  Aali

  Hello Aali.

  Ok. If you perform the following operations:
  -Go to the reports/set/RowSet and interrogate the line set for the report of the FSG. Press the button set the lines and make sure that no currency is defined on the control of balance area.

  -Go to the reports/set/defined column and and check that the above condition is also true.

  -Run the concurrent request GL called "Program - run the financial statement generator" by selecting the report balance sheet FSG and the desired currency.

  I hope this helps.

  Octavio

• HFM Consolidation of the balance sheets of the EBS GL

  Hello

  I'm consolidating an applicaton of HFM, I created my account dimension based on the balance sheet of GL accounts, I mean that the account type is done on GL.GL_CODE_COMBINATIONS. ACCOUNT_TYPE,

  I generated a text file based on the sql query, the first time I loaded the balance without any validation of the account and I realized that HFM change the sign for expenses account, so I change the sign for accounts DECODE (GL.GL_CODE_COMBINATIONS. ACCOUNT_TYPE, 'A',-1, 'E',-1, 'L', 1, 'o', 1, 'R', 1) when I generate the text file, but in peacebuilding, I noticed that expense accounts has not changed the sign. My questions are, what is just way to load in HFM? HFM change the sign and what kind of accounts?

  Concerning

  Hello

  The answers to your questions are quite complex.

  First of all, about the right way to load in HFM, you should find the answer by asking your customers. HFM should be aligned with business processes, and that means that the right way is defined by the company.

  Secondly, regarding the HFM change sign and what kind of accounts, I suggest to read pages 75 to 80 of the PDF document

  Post specific questions.

  Kind regards

  Thanos

  < spam="" signature="" link="" removed="" by="" moderator="">

• Balance sheet at the average rate?

  Hi all
  
  I have an application where: -.
  Default currency is EUR.
  By default the rate for the balance sheet accounts = ClosingRate.
  By default the rate to the flow accounts = AverageRate.
  Use PVA for the flow accounts is checked.
  Org by Application of the period is checked.
  
  For the problem - we now have a child entity in GBP contributing to 100% for a parent in euros entity. Looking at an individual account - the account (A100) is marked as an ASSET (i.e. the Type of account Consolidation = 'Active').
  
  I loaded the data (rates & operations) and set '[Active]' for all of the necessary features. I ran a default consolidation (no calculations) and local values have been translated and aggregated upwards.
  HOWEVER - the account marked as an asset (A100) was converted from GBP EUR to the AverageRate.
  
  Why is this not with the ClosingRate (which I expected)?
  
  11.1.1.3 usage and it is an application of EPMA
  
  Thank you very much
  George

  This asset has an associated custom you entered marked as type of flow switch?

  JOINT TASK FORCE

• How to set the condition of rule to check the Primary Key, Foreign Key and Unique

  I use Oracle 10.2
  Could someone tell me please how to set the rule condition to check the primary key, foreign key constraint of uniqueness?

  Hello

  Primary key, unique constraints and foreign key are better applied using the native functionality of database constraint. If you like the rules to check if a key exists at the time of the evaluation, you can use a function defined by the user in a rule condition and this function can ask to turn the table keys.

  Hope this helps,
  -Aravind.

• I try to buy CS6 online but are unable to do so. the page showed: broken link.

  I am buying CS6 online, but do not then the page showed: link broken. check below link for information: http://www.Adobe.com/sea/products/catalog/CS6._sl_id-contentfilter_sl_catalog_sl_software _ sl_creativesuite6.html

  Works fine for me.

  Try to clear your browser cache or by using a different browser.

• Reports - the values of the checkbox and the conditional column visibility

  Although I use Oracle databases for many years, I must admit that I am rather new to APEX. I build a first prototype project to convince our project managers and managers of the usefulness of the product for future projects (as for interfaces Visual of the database where the focus is on forms and reports, it is often quicker and cheaper to build an APEX application instead of a webapp in Java or c# full blown).
  
  I have a few problems however.
  
  I'll start with a quick description. I have the following structures of parent/child:
  
  Provinces > cities > Intersections > earrings > detections in loop.
  
  Basically, I want to do a report on detections of loop. Now, as we have thousands of detections someday, I did kind of a mining structure down. First, you choose your province, then the city, then the intersection and finally the loop. Do not use the lists to make the selection. Instead, I did a (classic) report on each side because it allows me to give detailed information for each part. In each report, I made a link on the identifier. For example, when I select a province (by clicking on the link), I pass the identifier of the province of cities report and use it in the query to restrict my report to these cities in the province. I repeat these step for different parts, which, in the end, gives me the selected loop loop detections. The good news is that all this works very well. However, the person who will use this application made a suggestion and asked if it would be possible to select different loops and thus get the detections for several loops (the rest of the application remains the same). However, this means that I can't use the link in the column more. Now, I thought in the sense of a checkbox control. The link to the column is still there, but the user would also have the possibility to select several items in the report. I have managad to add a checkbox control to the report, associated with the loop identifier column. It's not really hard. I can't understand, however, how I can pass the identifiers found in the next report (detections for the selected loops) and use it in the report's underlying query. The problem is, I do not know how to pass the values checked to the next page and how to use these values in the request of the State of this page. I guess it must be possible, but I couldn't figure out how. I tried to play with APEX_APPLICATION. G_Fxx and others. Don't forget I'm a newbie and this seems to be more advanced features.
  
  I downloaded the images from the 2 on the pages of the report to illustrate:
  
  http://img96.imageshack.us/img96/1497/apex01.jpg
  
  http://img140.imageshack.us/img140/9868/apex02.jpg
  
  A second point that's bothering me is this. In the loop detection report, I show a link column (I chose an icon instead of the value of the column) for each line. I also have a column that displays the number of detections for the given line (and one day). Now, for some lines, there is no detection that has emerged. Therefore, there is no point in the selection of this loop, because the result will be a blank report. However, I still want to show the loop in the loop selection report, as it is always present (it is not as if he suddenly disappeared). Of course, no big problem and most users probably have sufficient intelligence to understand this. However, it would be nice if I could do the icon (link colum) visible only for these loops with detections, or in other words, for these recordings in which number_of_detections (COUNTY of underlying column) is greater than 0. I couldn't find a way to do it either. The conditional display for a column option didn't really offer me a solution here.
  
  Before I forget, I use APEX 4.0.1 on an Oracle XE database.
  
  Any advice or suggestions would be welcome! :)
  
  Thank you.
  
  Erwin

  Hello

  You mean something as in this example
  https://Apex.Oracle.com/pls/OTN/f?p=40323:55

  You can store the values checked into collection and then use it in another report where clause

  See for example this post for how you can memorize checked lines to the collection
  Re: Need help with APEX_Collection

  In the sample report DEPT query is

  SELECT
    CASE WHEN EXISTS(SELECT 1 FROM emp e WHERE e.deptno = d.deptno) THEN
      APEX_ITEM.CHECKBOX(1,c.c002,'onclick="saveDeptChk(this,'||c.seq_id||')"','true')
    END AS row_selector,
    c.c002 AS checked,
    d.DEPTNO,
    d.DNAME,
    d.LOC
  FROM dept d,
    apex_collections c
  WHERE c.collection_name = 'DEPT_CHK_COLLECTION'
    AND d.deptno = c.c001
  

  And the report on EMP

  SELECT e.EMPNO,
    e.ENAME,
    e.JOB,
    e.MGR,
    e.HIREDATE,
    e.SAL,
    e.COMM,
    e.DEPTNO
  FROM emp e,
    apex_collections c
  WHERE c.collection_name = 'DEPT_CHK_COLLECTION'
    AND c.c002 = 'true'
    AND e.deptno = c.c001
  

  Kind regards
  Jari

• HP Deskjet 2132: The date showing on my screen but does not print on the sheet.

  The header and the footer shows on my computer screen, but it does not print on the print current sheet.

  I tried the solution, but it did not work, and the strange thing is that if I change from Portrait to landscape of the date part prints but not all of it.  21/02/16 just found the problem. I was using the Google Chrome browser and I switched to Mozilla Fire fox.  Walla, the problem has been resolved. Thanks a lot for your help. I don't know much about computers so I'll have more questions later.

• How to build finance balance sheet as user interface using the ADF Faces component

  Hello

  We know that financial balance sheet will have a calculated field, imaging of the last row will be the value of the sum for all above each column (see below the very approximate example), I doubt that ADF Table is the faces component appropriate to have a quick idea on this? Thank you

  1 point | 10. 10. 10. 10. 10.

  2 point | 20. 20. 20. 20. 20.

  sum | 30. 30. 30. 30. 30.

  -Liang Yi

  It is possible in the ADF. See below how you can add a sum calculated lines.

  http://rohanwalia.blogspot.in/2012/11/ADF-Groovy-for-total-sum-of-column-in.html

  You can extend the same approach in your use case.

  Thank you

• show/hide the button with the icon enabled when the condition is met

  Hello
  
  I created a B button with an icon of a sign of the green check mark.
  It must appear next to another A button when a condition is met.
  
  How can I better get this working B key, without using something else than the APEX.
  
  The condition is that some data has been inserted by clicking A button or simply exist in the database table.
  
  I tried conditional display of point with conditiontype "PL/SQL Expression.
  but could not make it work.
  
  TNX to tide me over.
  
  Cara

  Hello

  If you use the condition EXISTS (SQL query returns at least one row)?

  This could give idea how
  http://Apex-SMB.blogspot.com/2009/05/How-to-determine-if-user-can-view-apex.html

  BR, Jari

  Published by: jarola 18 November 2009 16:07

  Oh,.
  I paste the wrong link and can not find more good.
  Well anyway in this link is also example to condition EXISTS

  To meet this requirement I can add a condition (SQL Exists) to the Report 2 region on Page 2:
  

  It takes something similar and your table selection

• button is not rendered in the parent page after setting the condition made in popup.

  Hi all

  I have a page test.jsf where I have a button called display window confirmation with condition rendered as below

  < af:button text = "show the Confirmation window" id = "b8".

  actionListener = "#{TableShuttleBean.showConfirmationWindow} '"

  rendered = "#{TableShuttleBean.popUpCheckBox.Value == true} '/ > "

  I call a popup based at the click of another button. Where I gave an option so that the user doesn't show this confirmation again window. Once the user sets this checkbox and close the pop-up window. I display a button in my test. JSF which will allow the user to restore to the original setting.

  < af:popup.

  a code

  < af:selectBooleanCheckbox shortDesc = "#{bindings." EmployeesView1.hints.Selected.tooltip}.

  ID = "sbc22" text = "don't show this window again"

  Binding ="{tableshuttlebean.popupcheckbox}" / > "

  < / af:popup >

  I put the partial trigger for the OK button of the pop-up window to the form of the page parent element, but it does not work. I'm not able to update my parent page and show the button.

  My apologies if I'm not able to explain my problem clearly.

  Thank you

  Mozakkir

  Mozakkir, please indicate your Jdev version!

  You cannot use the property made for it. Once the rendering of the property is false, the component he remembers of the tree and is not shown again without a full page refresh. However, you are only a partial new.

  The visible property of the user instead that just hides the component and allows to show later with a partial refresh.

  Timo

• Ignore the condition AVERAGEIF referenced cell is empty?

  I'm trying to run an AVERAGEIF function based on up to 3 sets of test values whose conditions are determined by the entries in cells referenced in the formula.

  Here is a picture of the table:

  

  Seminar, day and hour are the columns from the drop-down list. Registered average and average archived have AVERAGEIF formulas that use the data in the table another as test values that resolves as true when they correspond to data in the corresponding cells of the seminar, day and hour [example: IFERROR (AVERAGEIF (seminar, Schedule::Registered, $Topic, $A2, $Days, $B2, hourly seminars: $B, $C2),' ')]. This set works fine if I have all three of the cells in the columns of seminar, day and time information, but I would like to also see average which which do not take into account (i.e., what are the averages for what seminar is offered Monday, regardless of what time?). Is it possible to get these formulas to ignore the conditions that are left in white?

  Thank you!

  AVERAGEIF accept them * and? wildcard characters.  You could try to enter * in the Time column and see if your formula returns desired results.  Without seeing the data format in your time table of the seminars, however, it is difficult to know if you need to make other adjustments to make it work.

  For example, you use Date & time format of data?  If so, numbers actually stores a date and time, even if you have a cell that is formatted to display only the time. This can give results, that you are not pregnant if you do not have two cells showing that same time can be interpreted by the numbers as being different, because the part of associated of the date string date and hour is different.

  SG

• I backed up the files on a DVD of a XP OS to put on a 7 OS but the record shows that the data on the DVD is corrupted

  I backed up the files on a DVD of a XP OS to put on a 7 BONE, but the record shows that the data on the DVD is corrupted. I have run some recovery on the DVD programs and even if she shows that 2.3 GB have been used they are unable to find the data

  * original title - I need fast help please *.

  How is not have you backed up the files?  You just burn it to a CD or did you use the 'NT backup' program of Windows XP?  I don't think that the Windows XP Backup program is compatible with the Windows 7 backup program.  The following link contains an article that explains this condition:

  "Windows 7 backup XP restore"

  If you simply copied the files on the CD/DVD, then it is possible the program that copied the DVD not to "finalize" the DVD.  If you can play the DVD on the computer that created it, but cannot on another computer, then this is probably the case.  If this is the case, then put the disk into the computer that created and put in place the program that burned and look under the 'Tools' menu for an option "Finalize"... and do it.

  HTH,
  JW

• I have installed Windows Vista SP1. I accept the conditions and the installation ends... but there is no SP1 is installed.

  Original title: I have installed Windows Vista SP1. I accept the conditions and the installation ends... but there is no SP1 is installed. I tried a few times, but the same story.

  I have installed Windows Vista SP1. I accept the conditions and the installation ends... but there is no SP1 is installed. I tried a few times, but the same story.  I'm I did somenthing evil?

  Hello

  Thanks for posting in the Microsoft Community.

  If I understand correctly that you have problems with the installation of Windows Vista Service Pack 1.

  Please answer these questions:

  It shows in system properties?

  To open system properties:

  (a) click Start, right click on computer

  (b) click on properties

  (c) see if it shows Windows Vista with service pack 1 on windows edition.

  Hope the helps of information. We know if you need help. We will be happy to help you.

   

• Latest Dell Audio is missing the button 'Show meters. (Windows 10, Dell XPS 8700)

  EDIT: Rewritten for clarity

  Driver Realtek ALC3861 Audio (worm) 6.0.1.7525, A00 for Windows 10, it is no longer a button labeled 'Show meters' under speakers/Headphones > Maxx Pro Audio in the lower right corner (see attached screenshot). This button in previous versions of the driver for Windows 7 opens a new window with sliders to balance the front speakers and rear in a surround Setup.

  What I did:

  Update my OS 7 to 10 and set to update drivers Realtek audio as a result - to the version mentioned above.

  What I expected:

  The button 'Show meters' would be present in the most recent driver Realtek.

  What really happened:

  After the upgrade to the latest driver, the 'Show meters' button is gone.

  I reinstalled the latest driver several times and nothing helps and tried the driver from Windows 8.1 and by default with Realtek with worse affects (Audio Dell window missing most of the items/drop options, etc.)

  If anyone would know how to solve the problem, if it is intentional, or that worsen it, I would appreciate it.

  I think I should be more careful. In Control Panel > Sound > playback > select the Realtek device > properties > levels there are specific changes, I need. I don't know why I didn't notice until now. Could explain why there was no button 'Show meters"in this version, but I thought that Windows 7 has also had the same upgrade and there was audio Dell upgrade as well.

  I'll still with a new soundcard from Creative, however, saw a $70 super nice which looks great and seems to have features to match.