Chicony Camera 'Operation of floating not valid' on a series of Satellite
Hello
I had problems with my camera lately. the Camera Assistant Software does not work, but the camera work on Skype, etc.
Now I uninstalled and reinstalled the latest drivers, but when I try to use the CASE it says "Operation floating invalid". I tried everything to my knowledge. Can someone help me? This happened to someone?
Thank you, Eric.
It's interesting, one might think to reinstall the camera driver and the CASE would be to resolve the problem.
Perhaps that the system is corrupt and needs recharging. I might try to run recovery and see how it goes.
Tags: Toshiba
Similar Questions
-
Satellite P200-199: Chicony Camera assistant software does not
OK, that makes me crazy. I read all the papers that came with my new computer. I have been using / computers in construction since 1994. The camera on the P200-199 does not work, the drivers are not recognized on my vista operating system. I tried other select USB driver it, didn't work. Research on the cd of restoration for more than an hour - was not found.
I've not seen anything listed at pages 4-8-4-9. There is NO Camera Assistant Software"located 5 research for it on my computer. Tried yahoo, aol, msn all who have web applications cam - none of those who built it in camera.
Yes, with this in mind, where I can d/l the software for this camera to work?
Hello Dave
Before starting any discussion please can you follow me thing: has your laptop or you factory settings installed your own OS?
By the way: I'm really confused you with as much experience PC don't know what is the recovery image?
-
When I export a file in Adobe Premiere Pro, I get the error: operation of menu invalid and a lower-level exception occurred in ImportMPEG (importer) how can I fix this?
I am running Windows 8.1 Pro, Intel Core i7 - 5930K @ 3.50 GHz CPU
RAM - 16 GB
Adobe Premiere Pro CC 2015
-
PC recovered and now it says that windows is not valid
I have
recovered my HP Pavilion PC p6110t CTO desktop computer and now he tells me that the windows vista operating system is not valid... .any suggestions
Hello
If windows reports that it is now enabled, try to restart the PC to see if the invalid message disappears after a reboot.
Kind regards
DP - K
-
Is there a way to determine if a camera IMAQdx session is still valid or not?
If it is valid, IMAQdx Open Camera.vi will return an error.
If it is not valid, IMAQdx Close Camera.vi will return an error. And IMAQdx close Camera.vi is very slow during the in camera session is invalid.
I mean IMAQdx Camera.vi open have not yet been called, or IMAQdx Camera.vi Close has been called.
Although there is no node property for this purpose, other properties, such as the name of provider of camera, are acceptable workaround solutions.
-
Chicony camera does not work.
Original title: Camera Chicony
I have the version 1.1.0.216 Chicony Webcam file that does not work... What do I do?
I tried to find a download for it & can not find... Please help!You contact support for a Chicony for help with their product.
-
perdir media that came with the license, and I made several downloads of the version most always displays the message is not valid
Error: "serial number is not valid for this product". Adobe Creative Suite
-
Game-CDDrive operation is not valid due to the current state of the object.
It's been a while, please remind me how to put the code here? PSVersion 5.0.10105.0 VMWare PowerCLI AutoDeploy component 6.0 build 2358282 VMWare ImageBuilder PowerCLI component 6.0 build 2358282 license of VMware PowerCLI component 6.0 build 2315846 VMware vSphere PowerCLI component 6.0 build 2548068 VMware VDS PowerCLI component 6.0 build 2548068 Cloud of VMware Infrastructure Suite PowerCLI component 6.0 build 2548068 VMware HA PowerCLI component 6.0 build 2510422 VMware PowerCLI component Storage Management 6.0 build 2522368 trying to build a server from the ground using Powercli. Started with:
$paramVM = @{
VMHost = $vmhost
Version = "v7"
Name = "CompVM"
Data store = $datastore
DiskGB = 50
DiskStorageFormat = "EagerZeroedThick"
MemoryGB = 4
NumCpu = 1
Location = $Folder
CD = $true
ResourcePool = $ResourcePool
PortGroup = $portGroup
Notes = "DC of DOM"
Confirm = $false
}
$paramVM . Location | select *
New-VM @paramVM
It seemed to go very well.
Get-VM svr01mid100 | Start-VM
Then, something isn't quite right.
$paramNA = @{
StartConnected = $true
WakeOnLan = $true
Connected = $true
Type = « Vmxnet3 »
Confirm = $false
}
Get-VM chi01osm300 | Get-NetworkAdapter | Set-NetworkAdapter @paramNA
, I get the error: Set-NetworkAdapter: 29/07/2015-18:44:36 Set-NetworkAdapter operation is not valid due to the current state of the object. Online: 9 char: 43 + Get - VM svr01mid100 | Get-NetworkAdapter | Together-NetworkAdapter @paramNA + ~ ~ ~ + CategoryInfo: NotSpecified: (:)) [game-NetworkAdapter], VimException + FullyQualifiedErrorId: Core_BaseCmdlet_UnknownError, VMware.VimAutomation.ViCore.Cmdlets.Commands.VirtualDevice.SetNetworkAdapter MacAddress: 00:10:56:ss:3f:ab WakeOnLanEnabled: true NetworkName: SameAsAbove Type: Vmxnet3 ParentId: VirtualMachine - vm - 108361 Parent: svr01mid100 Uid: /VIServer = Dom\[email protected]: 443/VirtualMachine = VirtualMachine-vm-108361/NetworkAdapter = 4000 / ConnectionState: logged, NoGuestControl, StartConnected ExtensionData: VMware.Vim.VirtualVmxnet3 Id: VirtualMachine-vm-108361/4000 name: NIC 1 Client: VMware.VimAutomation.ViCore.Impl.V1.VimClient )
Get-VM svr01mid100 | Get-CDDrive | Select Name,IsoPath
Name IsoPath - CD/DVD drive 1 C:\ PS > Get - VM svr01mid100 | Get-CDDrive. Game-CDDrive - IsoPath $isoPath - StartConnected $true - confirm: $false Set-CDDrive: 29/07/2015-18:50:39 Set-CDDrive operation is not valid due to the current state of the object. I disconnected and then reconnected my session. I tried to see what was going on in vCenter (which I never do) and I fount it tries to start with the ISO, but giving a frown face and reboot again. I think that he did not like something in the build of the server. Help!
I don't know that I did it is clear enough. The new VM script seems to work, it creates a new virtual machine.
But eventually, every setting change that I try to do on the virtual machine, I get an error stating that "the operation is not valid due to the current state of the object."
It seems to take the configuration but then I noticed he tried to start, but it started getting the error that I put in the screenshot.
To me, that shows that it is trying to boot from the CD, because it is a Windows error. Moreover, he just trying to start several times.
Now, I went back and I think that the error "operation is not valid due to the current state of the object" may have been the fact that the VM tried to boot from the CD over and over, this is what is meant by the current state.
I noticed just here, the hosts have 4.1 on them, which does not support r2 Server 2012.
I think we're good. Thank you!
-
Anyone know why it continues to be? It happens every time I Save a project - the project records very well, so why it reappear?
There seems to be a bug. See here:
-
Hello guys!
I've been googlin everywhere, but impossible to find a solution to my problem. I hope that one of you, qualified people can point me in the right direction :)
I created a powerCLI script to take a snapshot of our most important servers before we do our weekly maintenance. The idea to run the script as regular powershell script and then have
- Add snap-ins powercli and connect to virtualcenter servers
- ask the VC servers to virtual machines in a perticular folder
- Loop foreach on these servers to create a snapshot with the name $snapshotname
Currently, I just do it turn on a test folder that I created in vSphere that contains 3 test VMs:
- Testmagne1 - normal operation
- Testmagne2 - I renamed the folder for this virtual machine in the data store to generate an error.
- testmagne3 - normal operation
Since the servers (not the test servers, but good ones) is the most important servers in our environment, I want to be able to catch exceptions and errors when I run this script. I do this with the Try - Catch - Finally works.
The strange thing is:
The release of Powershell/PowerCLI is different from the output in VirtualCenter (!)
In virtualcenter, the output is as follows
- Testmagne1 - snapshot is created successfully - as expected
- Testmagne2 - the snapshot creation fails because it cannot find the files .vmx - as expected
- Testmagne3 - snapshot is created successfully - as expected
However, the exit in powercli is slightly different:
- Testmagne1 - snapshot is created successfully - as expected
- Testmagne2 - creation of the snapshot fails because it cannot find the files .vmx - as expected
- Testmagne3 - snapshot fails with the error message: operation is not valid due to the current state of the object - huh?
Apparently once the first error is generated all succeeding VMs get error "the operation is not valid due to the current state of the object"
I've been pulling trying to figure this problem on my hair, but I'm not getting anywhere
Here is some additional information:
1. the Script (abridged version of it. It generates the same error):
-STARTUP SCRIPT-
$ErrorActionPreference = "stop".
Add-PSSnapin VMware.VimAutomation.Vds, VMware.VimAutomation.Core | Out-Null
SE connect-VIServer VIRTUALCENTER1, VIRTUALCENTER2 | Out-Null # Sensored VirtualCenter names
$servers = get-VM-location 'testfolder '.
$snapshotname = 'Testsnapshot '.
$verifycreatesnapshot = Read-Host "you are about to create snapshots for $servers. Do you want to continue? o/n.
If ($verifycreatesnapshot - eq 'y') {}
Write-Host "snapshots of creation...". »
{ForEach ($i in $servers)
Write-Host "instant Creation for $i."
Try {new-Snapshot - VM $i - name $snapshotname |} Out-Null}
Catch {$_.exception | select *;} Write-Host "Unable to create the snapshot for $i" ;}
}
Write-Host "command finished.
}
else {Write-Host "Operation canceled by user"}
Read-Host "end of the script. Press ENTER to close. "
------------------ END SCRIPT -------------------
2. the PowerCli error messages:
Error for Testmagne 2 (as expected):
File: [DATASTORE114] testmagne2/testmagne2.vmx
DynamicType:
DynamicPropertyInternal:
FaultCause:
FaultMessage:
ErrorId: Client20_TaskServiceImpl_CheckServerSideTaskUpdates_O
perationFailed
ErrorCategory: NotSpecified
TargetObject:
RecommendedAction:
SessionId:
ConnectionId: /VIServer = SENSORED: 443 /
Severity: error
Message: 31/10/2013-10:52:16 New-Snapshot the operat
ion for the entity 'testmagne2' failed with the follo
the wing's message: "file [DATASTORE114] testmagne2/testmagn".
E2.vmx was not found.
Data: {ParameterValues}
InnerException: VMware.Vim.VimException: exploitation of the entity
'testmagne2' failed with the following message: 'thread '.
testmagne2/testmagne2.vmx e [DATASTORE114] was not crazy
ND ".
TargetSite:
StackTrace:
HelpLink:
Source:
Failed to create the snapshot for testmagne2
Error for testmagne3:
Creation of snapshot for testmagne3
ErrorId: Core_BaseCmdlet_UnknownError
ErrorCategory: NotSpecified
TargetObject:
RecommendedAction: An error occurred when executing command: new-Snapshot. I have check
f exception for more details.
SessionId:
Login ID:
Severity: error
Message: 31/10/2013-10:52:17 instant New-capture operation is not
valid due to the current state of the object.
Data: {ParameterValues}
InnerException : System.InvalidOperationException: operation is not valid from
e to the current state of the object.
at VMware.VimAutomation.ViCore.Impl.V1.Task.ViCoreTaskCo
reServiceProviderImpl.BeginTaskCompletionPoll (list 1 taskLi
St)
at VMware.VimAutomation.Sdk.Impl.V1.Task.CoreTaskService
Impl.WaitForTask (IEnumerable 1 taskList, ProgressCallback p
rogressCallback)
at VMware.VimAutomation.Sdk.Util10Ps.BaseCmdlet.BaseCmdl
and. EndProcessingErrorHandled()
at VMware.VimAutomation.ViCore.Util10Ps.BaseCmdlet.BaseC
mdlet. EndProcessingErrorHandled()
TargetSite: Sub ThrowTerminatingError (System.Management.Automation.Err
orRecord)
StackTrace: At System.Management.Automation.MshCommandRuntime.ThrowT
erminatingError (ErrorRecord errorRecord)
HelpLink:
Source: System.Management.Automation
Failed to create the snapshot for testmagne3
3 PowerCLI version
PowerCLI Version
----------------
VMware vSphere PowerCLI 5.5 Release 1 build 1295336
---------------
Versions of the snap
---------------
VMWare AutoDeploy PowerCLI component 5.5 build 1262826
VMWare ImageBuilder PowerCLI component 5.5 build 1262826
License of VMware PowerCLI component 5.5 build 1265954
VDS's VMware PowerCLI component 5.5 build 1295334
VMware vSphere PowerCLI component 5.5 build 1295334
4 VirtualCenter version
VMware vCenter Server Version 5.0.0 Build 913577
vSphere Client Version 5.0.0 Build 913577
Hosts: VMware ESXi 5.0.0 Build 914586
If you need additional information, let me know
Any help is greatly appreciated
Thank you!
-Loincloth
Definition - ErrorAction Stop locally on the cmdlet will not solve the problem. We have found and solved the problem and the fix will be available in the next version. Until then, you can use the $error variable to detect whether the cmdlet was successful or not. You can clear the $error variable before calling the cmdlet and check if it's still empty after the call.
-
With Move-VM error: operation is not valid due to the current state of the object.
I only started shows after update to PowerCLI v5.1. My vCenter is v5.0. I saw this when moving virtual machines to a data store in a different data store cluster. The task submits to vCenter successfully and ends, but the Move-VM errors and returns control to the script or command line that ran.
$> Move-VM - VM somevm Datastore - somedatastore - confirm: $false
Move-VM: 13/11/2012-16:07:45 operation Move-VM is not valid due to the current state of the object.
On line: 1 char: 1
+ Move-VM VM - somevm - data somedatastore store - confirm: $false
+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
+ CategoryInfo: NotSpecified: (:)) [Move-VM], VimException)
+ FullyQualifiedErrorId: Core_BaseCmdlet_UnknownError, VMware.VimAutomation.ViCore.Cmdlets.Commands.MoveVMI'm puzzled.
Do you by chance have a PowerShell v2 available somewhere where you can run the same script?
As much as I know there no official PS still in PowerCLI v3 support, although there are only a few known minor pitfalls.
While clutching at straws
-
Together-NetworkAdapter returning to "operation is not valid due to the current state of the object"
I'm using fix - up all-NIC in the host servers when a portgroup is renamed. Demand seems to make the required changes, then crashses. I don't see any errors in the list recent tasks in vCenter.
I use the following code:
Get-VMHost vmware.host | Get - VM | Get-NetworkAdapter | Where {$_.NetworkName - eq "ancien_nom"} | Together-NetworkAdapter - NetworkName "newname" - confirm: $falseThe error is:Together-NetworkAdapter: 17/10/2012 12:16:56 game-card network Operation is not valid due to the currentState of the object.At line: 1 char: 114{"+... ancien_nom"} | Together-NetworkAdapter - NetworkName "newname" - confirm: $false+ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~+ CategoryInfo: NotSpecified: (:)) [game-NetworkAdapter], VimException)+ FullyQualifiedErrorId: Core_BaseCmdlet_UnknownError, VMware.VimAutomation.ViCore.Cmdlets.Commands.VirtualDevice.SetNetworkAdapterIt's using PowerCLI 5.1 Release 1 against vCenter 5.0 and 5.0 ESXi.Any ideas how or tell you why it's a failure or repair.Thank youIainNo, you should not be a problem.
Are you by chance using PowerGui?
There were references to the exact same message when you use an older version of PowerGui and the PowerPack.
See New - VM error (operation is not valid due to the current state of the object.)
-
Script error: property not valid value operation
(in FormCalc)
I have a form with multiple pages. The first two are a graph and the other 8 diagrams. Diagrams have fields of number to the entry measures taken from an inspection process. The graphic form I have a button to fill in the chart with information from diagrams.
The click event of the button first retrieves the information from the diagrams and transfer them to the chart. He is then supposed to change the font color depending on whether the readings are within limits (black for good, red for the worse).
However, when I go in the preview PDF tab, enter test data in diagrams and click populate, I get an error that I don't know how to fix. I was not able to find something on the Internet about it.
Any help would be greatly appreciated. Here's what's on the screen of the error:
Script failed (language formcalc; context is)
XFA [0] form [0] .topmostSubform [0]. LHChart [0]. Button1 [0])
script =...
Error: The property not valid value operation; Police is not a default property
I found the solution to my problem.
I had the code in the target fields as well as the button trying to change color of font, based on imported figures. I deleted the code in the target areas and leave the code in the button field and everything worked right.
Thanks again for everyone's help.
-
OracleDataReader: Operation is not valid due to the current state of the object
Hi all
I am new to using libraries and oracle development tools. I have a project in vb 2010 began when I use the oracleDataReader to read data from my db (10g). by using the following code:
Oradb As String = "xxxxxxxxxxx".
Dim conn As New OracleConnection (oradb)
Conn. Open()
Dim test (1000) As String
Dim counter As Integer = 0
Dim cmd As New OracleCommand
Connection group conn cmd.
cmd.CommandText = "table FROM SELECT column where otherColumn > 21 June 11 '.
cmd.CommandType = CommandType.Text
Var as OracleDataReader dr = cmd. ExecuteReader()
Dr. Read()
test (Counter) = Dr. GetString (0)
While Dr. Read()
test (Counter) = Dr. GetString (0)
Counter = counter + 1
Loop
cmd ExecuteReader().
cmd.CommandText = "SELECT FROM table where otherColumn > 21 June NewColumn 11'"
Dr. Read()
test (Counter) = Dr. GetString (0)
How could change the cmd.CommandText to run new queries? As it is the second command dr.read throws the following error: "operation is not valid due to the current state of the object.
I found stating an another OracleDataReader object will allow me to run another query, I guess that there is a better way to "reset" State of the object first, as opposed to the creation of any new object each time I need to reset the command text.
Any ideas are greatly appreciated. Do not forget that I am new to coding, so I know the real C could be cleaned.
Thank you... cmd.CommandText = "
" dr = cmd.ExecuteReader() dr.Read() ... etc ... It will be useful,
Greg -
Windows 7 was installed about 2 weeks ago
I can not register the product
error message indicating the product key is not validPlease contact Dell about this issue. TaurArian [MVP] 2005-2010 - Update Services
Maybe you are looking for
-
When I press the modules and select the "Get Add-ons" tab, it is empty. However, the restart of Firefox solves the problem. Is there any quick fix (no update of my profile) so that appear on the first try?
-
iTunes won't unsync my music without deleting everything.
I synced my music from my itunes on my laptop and it deleted all my music, and when I tried it UNSYNC, it does not work. What should I do? This is really boring, I can't have all the music on my iPhone now. (I have an iPhone 6s) Help
-
How can I stop firefox keep my email and facebook online password?
How can I stop firefox keep my email and facebook online password? This has happened Each time Firefox opened is last week
-
People with disabilities control operated even if disabled
I just encountered a small problem which seems a bug to me. If you have a Panel and a knob under the close control, you can close the cover with the Red Cross in the corner, even if the button is disabled! It seems to me that in this case the Panel m
-
Can I control where is the audio output?
I built in sound on my motherboard (Asus Socket 775 using Realtek Audio). So many times I need to switch between the different audio outputs. Surprisingly its very difficult to find an external box which accepts audio and can spend 2 or more output