Satellite P200-199: Chicony Camera assistant software does not

Similar Questions

• Satellite P200 - Product Recovery Disk 2/2 does not work

  Hello

  because my laptop (Satellite P200 - I bought in December 2007) does not work more properly - and when, after a lot of cleaning it still wasn't working properly - I decided to start from the beginning and restore the operating system with 2 product recovery cd / dvd.

  Recovery disk 1/2 worked well - Windows Vista Home Premium product is loaded again on my computer.

  But what abot * Disck2/2 product recovery? *
  At one point, the recovery program calls for a 'supplement' but when I put in the product recovery disc 2/2 at this time, that the program does not recognize the disc. During the rest of the recovery program the program didn't ask for Product Recovery Disk 2/2, so the content of this CD-ROM/dvd now is not loaded on my laptop.

  Someone had this problem too?
  What do you have on this?
  Is this a problem for not loading the content of the product recovery disc 2/2 (I can go without it?)?

  Thanks in advance for any response!

  Artisans

  Post edited by: craftsmen

  Hello

  > Products 1/2 worked well - Windows Vista Home Premium recovery disc is loaded again on my computer.

  I put t know which modules the tool called for, but AFAIK the Toshiba image contains the operating system Vista, Toshiba drivers and additional software.
  So if you've recovered the laptop using the recovery disk Toshiba 1 then the laptop must be set to the SAME State as at the first day of the purchase.

  PS: what files you can find on the second disk?

• Satellite P200 accidents + message: graphic card driver does not work properly

  Hello

  hope that this issue has not been covered before, but I've owned a Satellite P200 for 3 years now, and this week, it crashes all the time.

  When it started going down he gave me a few messages in the sense of "your graphics card/driver does not work properly and windows will be arrested to avoid damage.

  It has progressed to the point where now when I turn it on, I have vertical lines running down the screen and the screen flashes on and outside. Within 20 seconds, it restores the BSOD - 'there was a problem and windows will be arrested. Error Page_Fault_In_Non_Paged_Area"then stops.

  I ran a system restore but the problem remains.

  I have a feeling that my graphics card is toast. Is this good? Are there any other options to try? Thanks in advance for any answers.

  Matt

  Hello

  Sounds like the GPU problem.
  But try the graphics card driver update.
  Use the most recent driver for your graphics card.

  In addition, clean the fans of portable computers.
  Dust and debris could prevent the cooling fans to turn with the best speed and this could lead to a higher temperature which would lead to overheating.
  Use a jet of compressed air. I also use it and it helps to get rid of dust and debris.

  If this is not enough, then a problem of graphics chip would be possible.

• Need for Satellite A200-1 g camera assistant software

  Hi all

  I have a problem... I need to find the software assistant camera for Toshiba Satellite A200-1 g
  Can anyone help?

  Thank you!!

  > Can anyone help?
  Maybe, but you should tell us what operating system you are using.

• Pavilion dv7t-6100cto Quad: HP Support Assistant software does not properly

  The software assistant support as I understant that it has been recently updated by HP will not work correctly. The objects he finds to put up-to-date in trail drivers and software download but will not be installed. It indicates that an error occurred and he will try again later. Whenever he tries it again it gives the same result. It is proposed that a Software Support Update Wizard in this package but as mentioned above it will install not even during installation by itself. Oddly enough when you go to the HP support site and scan for the driver and the software updated this newer version of update of HP are not offered as an update. Someone knows how to fix this?

  Hi @fishcrazy13

  I see that you are having problems with your HP Support Assistant. I'll be happy to help you with this problem. First go to your programs and features in Control Panel and uninstall it from there. Then download and install the HP Support Assistant again.  Then try to run the updates.  Let me know how it goes.

• Satellite M50 - 130 - Touch and launch software does not

  Hello

  I recently had my reinstalled M50 - 130 as he had a huge virus problem and the man who did it, did not reinstall all my drivers and utilities, so I've downloaded from the Toshiba page.

  Problem I have is that the software ' touch and launch "doesn't appear when I clicked through my Start menu or via my computer, I tried, put it back, but not luck. Anyone got any ideas? Because miss me it!

  Thank you!

  Hello

  The launch and the Touch utility is available on the European driver from Toshiba website. It s a 1.2.7.0 version. The Touch and the launch is a program to facilitate various functions using the touch pad.
  After installation, you should see it in the touchpad settings.

  You know the installation of drivers and tools?
  It s a little more tricky, the proper installation order is necessary to run the application correctly.
  You can find the installation instructions in the document of Toshiba, which was placed on the driver page.

  Believe me, many years ago, I was a newbie to Toshiba, but since several facilities of OS on my two computers laptop Toshiba, I discovered that the proper installation order is very important and necessary.

  So check it out buddy

• Chicony Camera 'Operation of floating not valid' on a series of Satellite

  Hello
  I had problems with my camera lately. the Camera Assistant Software does not work, but the camera work on Skype, etc.
  Now I uninstalled and reinstalled the latest drivers, but when I try to use the CASE it says "Operation floating invalid". I tried everything to my knowledge. Can someone help me? This happened to someone?

  Thank you, Eric.

  It's interesting, one might think to reinstall the camera driver and the CASE would be to resolve the problem.

  Perhaps that the system is corrupt and needs recharging. I might try to run recovery and see how it goes.

• New camera assistant software

  I have a chicony camera assistant Software on my toshiba laptop version 1.7.140.0157
  I went to the toshiba Download Center to check for a more recent version, found a version of 1.7.115.0213

  I would like to know, pls, which is the most recent version?

  Thank you
  allure

  Hey,.

  Normally, I would say that the installed version is newer because it has a higher version number.

  But why is it so important to you? If the internal webcam to work properly, I don't see a reason to update the driver for the webcam.

• Digital satellite P200 (PSPBGA) - footprints and the webcam will not work on Windows 7

  I use a Satellite P200 (PSPBGA) and have upgraded from Vista to Windows 7 Ultimate 32 bit.

  However the Toshiba Fingerprint Utility and Web Chicony Camera Assistant Software both do not work. I checked and there is no new update on the Australian site.

  Can you please help me with these two questions?

  Hey Buddy,

  I think that in this case, you can't do anything. I mean Windows 7 isn't on the market yet and at the moment there no drivers available. You can only try the Vista drivers because most of them are also work on Windows 7.

  Alternative I founded on the Toshiba page we some drivers beta Windows 7. Maybe they work:
  http://www.CSD.Toshiba.com

• I accidently deleted Camera Assistant Software of Satellite A205 - S4777

  I was wondering, I accidentally deleted my Camera Assistant Software for my laptop. How am I supposed to get it back. I looked in my program files and it disappeared completely. Is there a place where I can download the software again. I searched my computer everything for him and he is nowhere to be seen. I do not have an internal to the camera, but without the camera assistant software, I can't take pictures, or use my webcam. What should I do? Please, help me.

  Hello

  Please visit http://www.csd.toshiba.com/cgi-bin/tais/su/su_sc_home.jsp and you will find the Camera Utility for Windows Vista. I hope this will help you to make it work again.

  Bye and good luck!

• Satellite P200-199 - Win XP: does not work Fn + F5... Keys Fn + F9

  I had to install Windows XP on Satellite P200-199. After installation, Toshiba Hotkey Utility consists only of keys Fn + F3 and Fn + F4 and I can't change the brightness of the screen. How can I solve this problem? All programs and drivers XP downloaded from the website of Toshiba and installed correctly. BIOS version is the last (1.7.0). I can't work under Vista, and I choose Toshiba only for possibility of installation of XP :). If there is a way to change the brightness of the screen without hardware key (i.e. through a program or applet control), it is acceptable too.

  Thank you.

  P.S. On the Toshiba site, there is no version of Toshiba power saver utility for XP (for Satellite P200), but I try to install 7.08.05 version - there doesn't work (CANNOT be opened because you do NOT have right to "TOSHIBA Power Saver"). I have administrator rights (Administrator installation).

  Post edited by: SweN

  Hello

  Have you installed all the drivers in the correct order?
  Installation file instruction txt on the Toshiba page shows you the step by step guide line that the order of installation is necessary!

  With regard to the issue of keys FN;
  To my knowledge, the update of the BIOS is necessary. BIOS 1.7 - winner is not designed specifically for the XP operating system and therefore, it may happen that after the installation of the operating system XP, some functions don't work properly!
  Unfortunately, I didn't find another version of BIOS for the P200-199 PSPB0E series.

  See user's last message * vjkostas *.
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=24798&TSTART=0

  Concerning the issue of energy saving;
  The bomber screensaver utility and the Poser saver driver are available on page. I think first of all the pilot, and after restarting again the standby electricity utility must be installed.
  But take a look at the installation instructions.

  concerning

• Equium - Camera Assistant Software displays no toolbar

  I just installed Windows 7 on my ex-Vista Equium and copied the * Camera Assistant Software * above for webcam but unfortunately I can not display the toolbar.
  I opened the folder and selected * traybar * but when I select * see the toolbar * nothing appears.

  Hello!

  First of all, you should tell us what satellite notebook you have.

  Maybe your satellite cell phone doesn't support Windows 7 because are very few Windows 7 drivers and tools available. I think that you have downloaded the software of the camera for Vista and it seems thus that the software isn't working properly.

• How to convert a file the camera assistant software undf video?

  I recorded a video from the camera assistant software and I forgot to save it and it's a undf file and it won't play. It shows format undf. I tried a couple of conversion software, but it still does not play.

  Can you please tell me which no model of laptop you have and which version of the software assist camera do you use?
  On my laptop, I 1.1.1.10 version and I can set it to record in avi format. It can be played in several different players.

  If you put undf as a search term in Google you will find player undf by download. I also found the info you need Voxware MetaSound Codec for mediaplayer and you can find it HERE.

  Test it.

• Satellite P200-199 4 GB Ram upgrade

  Nice day

  I'm trying to upgrade a satellite P200-199 2 X 1 GB Ram to 2 X 2 GB Ram. DDR2

  When you install the new 2 X 2 GB of Ram, the computer will not start upward.
  If I install 1 X 2 GB of Ram, the computer starts.
  If I install 1 X 2 GB and 1 X 1 GB (orig) of Ram the computer does not start.
  It seems that the laptop is limmited to 2 GB.
  I verify that this is the last BIOS update v1.7

  Is there a way work about to run with 4 GB of RAM

  Thank you.

  Hello

  According to the data sheet Toshiba Satellite P200-199, the laptop supports my 2 GB RAM
  http://IL.computers.Toshiba-Europe.com/innovation/JSP/SUPPORTSECTION/discontinuedProductPage.do?DISC_MODEL=0&action=PRI NT_WITH_BACK & LNG = 29 & service = IL & PRODUCT_ID = 132098

  4 GB of RAM is not possible

• My Chicony Camera Assistant for Toshiba Windows Vista 32 bit no longer works

  After the last update. It is not listed in Device Manager. I uninstalled but failed to find a version of this software from the camera which works on my pc. Can anyone help?

  Contact the Office of support for a Chicony Camera Assistant.