chipset nForce 4 on machine ESX

Similar Questions

• Cloning machines ESX + vSphere 4.0

  Recently installed ESX 4.0 + vSphere Essentials 4.0 and now trying to clone a machine.

  According to the docs, the "Clone" option should appear in the Summary tab, window commands .  Unfortunately, the Clone is not an option.

  Orders only what I see in the window are Power On and change the settings.

  I am connected to vSphere as an Aministrator, so I think I should have all the necessary permissions.

  Any suggestions? Thank you.

  I think that you need a vCenter Server to clone machines, create templates, etc. I have connected my vCenter server and a server ESX and vCenter Server gives some additional options:

  Migrate

  A new virtual machine clone

  Clone model

  Robert

• Lodge 443. It Lan Driver Win XP

  Hello
  I need support on a pavilion of 443. that he reinstalled completely, but I can't find drivers for the network card for Windows XP of HP are not available.
  Thank you and good day

  Hello:

  You must install the driver of 220 chipset nForce for your machine. This will install the network card, but also a few other drivers of the motherboard:

  http://www.nvidia.com/object/nforce_udp_winxp_5.10.html

  Paul

• With the help of converter to create on a local disk, not datastore ESX ESX machines?

  Is it possible to create conversions of machine ESX local/off line without sending them to a machine ESX?  Selection of a type of machine virtual infrastructure does not allow me to save the files locally, only connect to an ESX Server.

  I have an ESX machine off site and cannot do the conversion to the ESX machine due to the limitations of bandwidth.

  I did this conversion of computer VMWare Server 2.x registered on a local drive and then converting again when I am on the site with the destination ESX.  It works, but its faster to FastSCP data off the USB drive only in order to re-run the converter.  Backup/DR purposes, it would be also good to know that I had the machines I had converted 'ready to go' format ESX without having to re - convert.

  > Is it possible to create conversions of machine ESX local/off line without sending them to a machine ESX? Selection of a type of machine virtual infrastructure does not allow me to save the files locally, only connect to an ESX Server.

  No, you must select a destination ESX and vCenter to create a virtual machine that is specifically compatible with ESX.

  > I did this conversion of computer VMWare Server 2.x registered on a local drive and then converting again when I am on the site with the destination ESX. It works, but its faster to FastSCP data off the USB drive only in order to re-run the converter. Backup/DR purposes, it would be also good to know that I had the machines I had converted 'ready to go' format ESX without having to re - convert.

  Unless you use something like VCB (who still works a backup and restore process), it is probably the best way to do it.  If you select your output for VMware Server 1.x, the "nearest neighbour" of ESX.  Then you have a few extra options like http://kb.vmware.com/kb/900/

  Kind regards

  EvilOne

  VMware vExpert 2009

  NOTE: If your question or problem has been resolved, please mark this thread as answered and awarded points accordingly.

• NVIDIA nForce network controller does not work after a clean install of Windows 7 "Code 10"

  HP 6736nr

  AMD processor, nVIDIA nFORCE Network Cotnroller (I wish there were more about HW than that)

  Windows7 32 bit host

  Wireless works fine.

  For network LAN controller, Device Manager displays "Device cannot start Code 10".  not useful as nVIDIA site

  I need to find new drivers.  Following hardware ID:

  PCI\VEN_10DE & DEV_054C & SUBSYS_30CF103C & REV_A2

  PCI\VEN_10DE & DEV_054C & SUBSYS_30CF103C

  PCI\VEN_10DE & DEV_054C & CC_020000

  PCI\VEN_10DE & DEV_054C & CC_0200

  I tried to disable / enable, and uninstall and nothing works.

  Thanks in advance.

  Hello:

  Normally, the chipset nForce Vista driver install the network card.

  http://h10025.www1.HP.com/ewfrf/WC/softwareDownloadIndex?softwareitem=ob-55781-1&CC=US&DLC=en&LC=en&os=2100&Product=3646946&sw_lang=

• HP continues to ship the defective 6 Intel chipsets to customers after the recall.

  Something people should be aware of is that HP has set up a 'solution' that isn't really a solution.  I had a QE DV7T (number of product XN093AV) who ordered in January.  The laptop has been affected by the issue of chipset and after one month of checking back with service customer HP I have finally told me they had a resolution and I could trade my machine for one with the newly revised chipset.  The replacement machine was delivered to me in mid-March, it was the number of identical product (XN093AV) and contained the same faulty chipset.

  Some experience for those who do not know the chipset issue.  Intel has launched a recall of their 6 series (cougar point) southbridge chipset designed for use with the second generation core i-series "sandybridge" CPU.  Among the functions of the chipset is the interface for SATA controller for storage devices.  The chipset handles 6 SATA ports, 2 to 6 Gbps and 4 to 3 Gbps.  It's the 3 Gbps ports that are affected by the design flaw which can lead to errors of data to an attached storage device.  Mobile version of this chipset Intel is called HM65 and progression (version) of the chipset with the problem is "B2".  Intel has implemented a solution of silicon and released a new "B3" progression that is not the problem.  However, Intel has continued to ship the affected "B2" step by step to the manufacturers for applications where 6 Gbps ports would be used as they are not affected by the design flaw.

  Back to "Fix" of HP - my original machine had the wrong "B2" stepping chipset HM65 with a hard drive connected to a 6 GB/s and an optical drive connected to one of the 3 defective Gbps ports.  The replacement machine, I received also had the same "B2" stepping HM65 chipset with both drives now connected to 6 Gb/s ports.  Unfortunately, this is not an acceptable solution on at least two fronts.  First of all, in addition to the disk hard main bay and the optical drive Bay, this particular 17.3 inch laptop has a secondary hard drive Bay.  Regardless, I bought an SSD that I intend to install plus readers installed at the factory.  This requires the use of a third port that should have been one of the 3 defective Gbps ports.  In addition, the laptop also has an e-SATA connector to connect external drives that I intend to use for backups.  I didn't check this, but as the main hard drive and the optical drive consume only two working ports it goes without saying that the e-SATA connector is connected to one of the faulty ports.

  After about 5 hours of being tossed around in the customer service Sub HP and said there is nothing wrong with my machine, they agreed to Exchange once again for one of the DV7T QE newly released (number of product XW899AV) models, which I hope will have the 'B3' stepping chipset HM65.  I have not yet received, so I can't verify whether or not the new product has the same problem.  I'll post when I get it.

  This affect you?  You can determine what capacity the chipset you have by running CPU - Z, a utility system free and widely approved, available at www.cpuid.com.  Select the mainboard tab and watch your chipset revision.  If you have the "B2" step by step and you plan to use more than two SATA devices at the same time you might have a problem.  The following link gives an overview your hp options.

  http://support.HP.com/us-en/document/c02712015

  I want to clarify that the answer to FAQ # 2 is definitely false.

  HP continues to make products with the affected Intel chipset?

  
  

  Lol HP stopped manufacturing products with Intel technology and queued expedition on products in stock HP and channel.
  

  Good luck.

  There are motherboards with the update 'B3' stepping chipset appearing as "B2" in CPU - Z.  Given that I don't have the laptop in question, I can't physically inspect the chipset.  I withdraw my statement because there is no way to prove whether what version of the chipset has been deployed to this machine.

  The following link provides another method of identification stepping chipset:

  http://News.Softpedia.com/news/how-to-find-out-if-your-Sandy-Bridge-motherboard-is-affected-by-Intel-s-SATA-bug-182252.shtml

  If anyone has a replacement XN093AV machine, perhaps they can post their findings.

  If for no other reason than not having to bear the XN093AV trackpad buttons (or lack thereof), I am always happy, they have accepted the return and will replace the machine with a XW899AV.  Not to mention the free graphics HD 6770 m, webcam HD and USB 3.0 card upgrade.

• Forgotten password root ESX...

  I might have gotten myself in a bind. I forgot my password of ESX Server.

  I have two vcenters a 5.0 brilliant 4.0 and new and I move some of my old machines ESX 4.0 to my new 5.0 vcenter.

  For this I must add the 4.0.0 old ESX Server for the new vcenter 5 and under what we all know I need a password... I forgot.

  The host is still connected to the old vcenter 4.0 administration on the day the day is not a problem.

  How do dig or change the password root or am I hosed?

  M

  With ESX (not ESXi), follow the steps in http://kb.vmware.com/kb/1317898 to reset the root password.

  André

• CB, VC or ESX management failure will affect the billing for this period?

  Hello

  Another question is if CB, CR or ESX management failure will affect the billing.

  Lets say CB is down for several hours.

  VC may be down.

  ESX could lose management while continue to run virtual machines.

  Thank you.

  Hello

  When you add a vCenter to the CB, there will be a data collector pointing to the DB of the vCenter.

  CB, settings it is a JOB - synchronization of the Stats, this work comes when you add Stats enable replication when adding vCenter, this job will run every 30 minutes by default. It is a work of data collector that pulls information in the DB vCenter to each use of 30 minutes, the virtual machine, ESX, consumption.

  vCenter fails or when the failure of ESX vcenter - then I believe that no information is written to the DB vCenter, where the CB loses information and billing can be affected and there may be loss of money.

  Yet once there will be loss only if you go "REAL consumption of CPU/Mem or disc etc.

  If the costing model is "Fixed" or "Founded allowance", then according to the date that the costing are measured and not a problem in this case.

  If the CB goes down then there is nothing to be disturbed, beak Stats job can run again to collect back the news from vCenter DB.

  Deepak

• migration of VM esx in suspended state while

  Hello world

  I had a problem that I'm stuck here, please let me know that it is urgent for me.

  one of my ESX3.5 was hung (agent pass has been suspended and is not at all reboot and shutdown) State and suddenly HA and DRS also does not work on this machine ESX.

  So in this case how can I migrate the virtual machines that are in this esx to another.

  Thanks in advance.

  Suresh

  Hi Suresh,

  As long as your host do not meet your needs, it will be impossible to move your virtual machines a gentle manner.

  The only way is to stop your guests inside the OS, restart them on other host and restart your ESX problem.

  Good luck!

  Concerning

  Franck

• ERROR: this version of esx requires a processor capable of 64-bit operation

  Kindly help to provide entries:

  I have a DELL Optiplex 760 that supports VT that is enabled.

  I tried to install directly ESX 4.0 and has been able to do successfully.

  However, I have tried to format and installed Windows 7 and then installed VM Workstation 7.

  When I tried to create a virtual machine (ESX), it gives me an error "this version of esx requires a 64-bit capable processor."

  Any advise?

  ESX 4 requires no VT she requires only a 64-bit processor.  Your physical processor is sufficient.  (Note, however, that you would be able to run the 32-bit clients.)

  Workstation 7 requires however VT virtualization features 64-bit processor.  Since you don't have VT, the virtual processor in Workstation 7 is a 32-bit processor.

• vSphere/ESX 4.0 build-164009 and Infiniband

  Hello

  I ' am assessment vSphere for our firm and I have a problem with a machine ESX and an Infiniband card. The goal is to connect the storage starting from JBOD

  via Infiniband to ESX hosts. I installed several ESX nodes to test, then I stop these machines and inserted the IB card. The map

  is visible via lspci. But are without modules loaded on the host ESX to IB. Any hint on the installation/activation of this card? Maybe I need to reinstall ESX host?

  Best regards

  Stephan

  InfiniBand Card Information:

  0 c: 00.0 InfiniBand: Mellanox Technologies MT25208 InfiniHost III Ex (Tavor compatibility mode) (rev a0)

  Subsystem: Mellanox Technologies Ex (Tavor compatibility mode) MT25208 InfiniHost III

  Flags: bus master, fast devsel, latency 0, IRQ 11

  Memory at dac00000 (64-bit, non-prefetchable)

  D8000000 memory (64-bit, prefetchable)

  Memory d0000000 (64-bit, prefetchable)

  Capacity: Power Management version 2

  Capacity: product Vital Data

  Capacity: reported Message interrupts: 64 bit + queue = 0/5 Enable.

  Capacity: Enable MSI - x: + mask - TabSize = 32

  Capacity: express endpoint IRQ 0

  Mellanox InfiniBand has drivers for the two ESX/ESXi 3.5/4.0

  http://www.Mellanox.com/content/pages.php?PG=products_dyn&product_family=36&menu_section=34#tab-two

  These drivers include SCSI RDMA PROTOCOL (SRP) for storage on InfiniBand and IP OVER INFINIBAND (IPoIB) for networking.

  See the Installation Guide for more details.

• Clone the volume mounted on ' / boot ' doesn't have a machine of REDHAT Enterprise 5

  Hello

  I downloaded and installed Voncerter Standalone Client 4.0.0 on a Machine virtual Windows 2003.

  I tried to convert a physical Machine to RedHat 5 in a Virtual Machine (esx Server 3.5).

  The following error occurred at 3%:

  Error: Impossible to clone the volume mounted on ' / boot ' of 'ComputerName '.

  No one knows what to do here?

  (I have not all additional configurations except those proposed in the Wizard)

  Kind regards

  lmayr

  Another customer recently had a similar problem where the 1st volume cloning failed because he used a partial host name and had not configured DNS suffixes for the static IP settings of the VM assistance network.  Please check that.  If this does not solve your problem, then please upload the logs of the task (the "export logs... ("link just above the lower-right event log.)

  (If your question has been resolved please check the responses as 'Useful' or 'Correct').

• How to get iSCSI SAN connected to ESX when the SAN is on a different subnet?

  Hi all

  I have two machines ESX which are directly connected to a San that are on a different subnet other network cards.  Other network cards are 10.x.x.x and the SAN is on 172.16.x.x, however whenever I try to add the iSCSI storage, the system will never find the LUN.  I put the vmkernel 172.16.x.x but it does not always find them.  I know that the LUNS are configured correctly if its ESX just having problems with the other subnet.

  You need to activate the Service Console to see the iSCSI SAN, too. This is because you use the initiator software. For example, you can add a second SC in the vSwitch that your VMKernel Port is connected and align on the same subnet.

  Kind regards

  Gerrit Lehr

  If you have found this or other useful information, please consider awarding points to 'Correct' or 'useful '.

• Can someone direct me to resources on how you get TWO esx servers to the same storage array?

  Hi all

  I use:

  2 x Compaq DL380 G2 with 5i

  cards controller 5300 AND attached to the base storage Bay

  STORAGEWORKS ENCLOSURE 4354R RM DOUBLE PORTS U3 (not yet pregnant

  compatibility list).

  The first server appears to see the good in the console of the virtual server storage Center.  The second server will see s for only its own storage room tho.  How do both to see and use the same storage.  The concept is new to me, but trying to learn.  Is there something I need to see the same storage in the virtual Center for TWO machines esx Server?  All IM just not in the right place?  Thank you.

  http://communities.VMware.com/thread/78873 was a previous thread on this can enlighten us. Looks like the 4354R has the bus is divided into 2 x 7 disks and each connector in the back can 'see' 1 of the two buses. The quickspecs (http://h18000.www1.hp.com/products/quickspecs/10624_div/10624_div.html) refer to "... allows access to two areas of storage separated from two different servers. So the first "thing" would be to get two buses attached together inside the unit so that the two connectors on the back see all readers, you must get the endpoint SCSI disabled on the device (you want termination on each 'end' of the cable that is two SCSI adapters in the servers).

  While you might be able to get the 4354R shared between the two ESX hosts, you can also get all the benefits of the shared disk + the possibility of vMotion, etc. by implementing the 4354R known as iSCSI or NFS storage. It also swings you back to something that is 'supported '. To do this, you have two approaches

  1. Fix 4354R on one of the ESX boxes, create a virtual machine that has access to the entire disk on the 4354R and run something like OpenFiler in the virtual machine to 'share' the disk via NFS or iSCSI

  2. Set up a 3rd server if you have one available and run the version of "bare metal" OpenFiler, or install Linux or OpenSolaris distribution and configure NFS and/or iSCSI target.

• contents.zip or how to update an ESX 3.5 without VC

  Hello boys and girls,

  I'm looking for an hour now for the contents.zip I need esxupdate tool.

  In the past, I downloaded the contents.zip and all new patches of http://www.vmware.com/download/vi/vi3_patches_35.html. Now I can't find the contents.zip more.

  The machine, that I need to update is a standalone ESX 3.5.0 build 110268 without a Virtual Center. It was purchased in the package of the edition of the Foundation.

  As I am informed, it is not possible to use the Virtual Center Update Manager.

  So I'm stuck get now how to upgrade the machine ESX. Hope this isn't my own stupidity.

  Any help is appreciated.

  Thanks in advance

  Recently, I found this file... whose know whi does not, I saw this link, but

  Here is the missed file... http://download3.VMware.com/software/ESX/ESX-3.5.0-contents.zip

  Best regards