CHKDSK hangs in Windows XP

Similar Questions

• hanging of windows 7 blue screen STOP: 0x0000001A (0 x 00041287, 0x0080D366, 0 x 0, 0000000 0000000

  Hello

  My PC works very well but a bit slower than before. but as soon as I want to analyze the computer or to change my security settings the computer hang or sometimes shows a blue screen with this error:

  STOP: 0x0000001A (0 x 00041287, 0x0080D366, 0 x 0, 0000000 0000000)

  It was then that that I am facing this problem and shortly, I write what I did:

  1.i made a backup and format the computer and reinstall windows 7, but the problem was still there.

  2 change the RAM and HARD drive, but the problem was there even if the problem wasn't their share.

  3. I asked some experts they said maybe you should change the motherboard, but that's the last thing I want to do because it's almost cost me new computer and I think the problem is something else.

  4. After all this, I decided to work with the computer anyway because I had so much unfinished business, then I realized my keyboard does not work. I bought a new keyboard and it worked.

  now my problem is up to this:

  I could work with my computer totally fine but it isn't as fast as ever, but that's fine. as soon as I scan the computer or change some settings the computer hangs or sometimes shows error blue screen!

  What should I do?

  Please help me

  y at - it a hope that I could fix it this computer.

  Hello

  Thank you for visiting Microsoft Community and we provide a detailed description of the issue.

  According to the description, I understand that you have a problem with slow performance, or sometimes the system hangs while parsing.

  Certainly, I understand your concern and will try my best to help you.

  I appreciate all your efforts really to try to solve this problem.

  I would suggest trying the following methods and check if that helps.

  Method 1:

  Try to run the troubleshooter of performance and check if it helps. Please follow the steps outlined in the article below.

  Note: The resolution of performance problems check issues that could slow down the performance of your computer, such as how many users is currently connected to the computer and if multiple programs are running at the same time.

  Open the troubleshooter of Performance

  http://Windows.Microsoft.com/en-us/Windows7/open-the-performance-Troubleshooter

  If the problem persists, follow method 2

  Method 2:

  I suggest you try to follow the steps in the link given below and check if it helps.

  How to use the tool File Checker system to fix missing or damaged system files, please follow the steps in the link provided below.

  https://support.Microsoft.com/kb/929833?WA=wsignin1.0

  Note: System File Checker is a Windows utility that allows users to find corruptions in Windows system files and restore the damaged files. This article describes how run the tool (SFC.exe) System File Checkerto scan your system for files and to repair the system missing or corrupt files in Windows. If a Protection of resources Windows (WRP) file is missing or is damaged, Windows may not behave as expected.

  If the problem persists, follow method 3

  Method 3:

  Run a full scan of the computer with the Microsoft Safety Scanner to make sure that the computer is virus-free.

  Microsoft, security scanner please follow the steps in the link provided below.

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  Note: data files that are infected must be cleaned only by removing the file completely, which means there is a risk of data loss.

  For reference:

  We may also refer to the article below and check if that helps.

  8.1 Windows, Windows 8 or Windows 7 hangs or freezes

  https://support.Microsoft.com/en-us/KB/2681286

  Note:  When you use system restore to restore the computer to a previous state, the programs and updates that you have installed are removed.

  Important: While running chkdsk on the drive if bad sectors are found on the disk hard when chkdsk attempts to repair this area so all available data on this risk to be lost.

  Note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.

  I hope this information is useful.

  Please let us know if you need more help, we will be happy to help you.

  Thank you.

• Tecra M4 stop (hang) after windows is boot

  Hello

  a have a big problem and want to solve it
  my laptop is tecra M4 + 1.7 + ram 512 CPU
  my lap top was good job
  now I have something strange.

  Is Hanger of work after starting windows > when i go to run a large program or garguillo its stop (hang) > then I press power for 4 seconds at the stop switch, he
  IAM tried to do useful things

  1. I opened the laptop to make sure that the fan is working well (fan on the processor) and it was good

  2 i tasted every thing within some programs in nature back: the result, everyone

  3 i changed the configuration of the laptop in the diagnostic mode and all were passed (ok)

  4 i reconnected every thing are related to the laptop as mouse > has no impact

  5. I changed the place of the mouse in another usb: lead in nature the laptop didn't stop in the first 3 minutes, but it stopped when I run a big program or game

  6. i reinstalled windows: no effect

  7-i bios update from 1.6 to 1.7: no effect

  I'm indulging in mad
  Please tell me what is the problem
  and what I can do...

  Thank you very much

  Hello Walids

  I have to be honest to you; your troubleshooting is very impressive, but you forgot to check the HARD disk. It is possible that the HARD disk do a few worries. If possible try to test the HARD drive with a tool, and see if there may be some bad sector or something.

  I had similar problem on my old Satellite. The laptop was slower and slower. I also noticed a little strange to his HARD drive.

  Just try to test the HARD drive. If everything is ok, I guess that you need professional help on this.

  Good luck and let us know if find you the solution.

• Pavilion dv7 hangs on windows start screen

  Hi all

  This problem started a few days after I bought this computer in June, and I have tried everything I can think of including the factory restore and nothing has helped. I really don't want to return it because I really like it, but I can't stand this problem starting. I bought this one after I returned a dv6 for a power supply problem, it would not turn on at all after I had it for only a few weeks.

  When the laptop is turned on it starts and then freezes on windows start screen. It takes a few other tests of the switch, tool repair, before I can get it to come. The repair tool is useless for this problem. In this process, I also end up with BSOD and stop errors. The error that appears now is 0 X 00009086. I will use no more restore because it isn't helped either.

  A computer brand new, not even a month and he has this major problem. I've read other articles published on the dv7 and have not found anything else to try.

  Windows 7 home.

  I would appreciate any ideas to try before I end up taking it back too.  Don't bode well for buying another HP again that's for sure.

  Hello

  I had already tried the first two options and they did not help.

  When I tried the 3rd option gave you the process stopped at C:\WINDOWS\system32\drivers\classpnp.sys.  I looked into this and found it to be a problem in Vista too. I have read through the postings for this but haven't tried anything yet.

  BSOD Stop error message... 9086 is associated with this start hang up.

  I move from the Intel site and ran their audit tool then update the HM65 Chipset. This had no effect on the victory starts page suspended.

  I ran sfc and he found no violation of integrity.

  I was leaving my laptop because it is easier then trying to make it work again properly now 4-5 tries to make it work. It aggravates really me that I have this problem with a new computer.

  I try next?

  Thank you for your help on this.

  Louise

  20/03/16 UPDATE ON THIS PROBLEM.

  I installed Windows 7 Pro and have not had a problem with start up since.

• Activation of Windows and Windows Update hang in Windows XP that is running under VirtualBox

  I want to set up a Windows XP VM on my 32-bit Windows 8 so that I can run the original Myst game.

  I own a legitimate copy of Windows XP (original packaging, CD, product key etc.) which is not in use (i.e. enabled) on any physical or virtual hardware.

  I use VirtualBox to host the since Hyper-V virtual machine is not supported on 32-bit Windows 8 (sigh).

  Installation proceeded like a charm, but I can't activate XP (hangs at 'check' connectivity) or can I install updates WU/MU (hangs "checking for updates... » ; I manually installed the SP3 JIC).

  http://Forum.sysinternals.com/RSS_xp-activation-Wu-fail-this-is-bizzare_topic7859.XML suggests that the WGA validation is suspended.

  MGADIAG, we get:

  Diagnostic report (1.9.0027.0):
  -----------------------------------------
  Validation of Windows data-->
  Release status: not activated
  Validation code: 1
  Code of Validation caching: n/a
  Windows product key: *-* - MH9R8 - T43X7-YG2PG
  The Windows Product Key hash: Guwl0sLNrd1B4KEnLj/u8Sq7c9c =
  Windows product ID: 55711-007-5201427-22362
  Windows product ID type: 5
  Windows license type: retail
  The Windows OS version: 5.1.2600.2.00010100.3.0.pro
  ID: {B2DCE8D6-2F18-4D48-A756-FF7B51E01AB2} (1)
  Admin: Yes
  TestCab: 0x0
  LegitcheckControl ActiveX: N/a, hr = 0 x 80070002
  Signed by: n/a, hr = 0 x 80070002
  Product name: n/a
  Architecture: n/a
  Build lab: N/A
  TTS error: n/a
  Validation of diagnosis: 025D1FF3-230-1_025D1FF3-238-2_025D1FF3-258-3
  Resolution state: n/a

  Given Vista WgaER-->
  ThreatID (s): n/a
  Version: n/a

  Windows XP Notifications data-->
  Cached result: n/a, hr = 0 x 80070002
  File: No.
  Version: N/a, hr = 0 x 80070002
  WgaTray.exe signed by: n/a, hr = 0 x 80070002
  WgaLogon.dll signed by: n/a, hr = 0 x 80070002

  OGA Notifications data-->
  Cached result: n/a, hr = 0 x 80070002
  Version: N/a, hr = 0 x 80070002
  OGAExec.exe signed by: n/a, hr = 0 x 80070002
  OGAAddin.dll signed by: n/a, hr = 0 x 80070002

  OGA data-->
  Office status: 109 n/a
  OGA Version: N/a, 0 x 80070002
  Signed by: n/a, hr = 0 x 80070002
  Office Diagnostics: B4D0AA8B-543-80070002_025D1FF3-230-1_025D1FF3-238-2_025D1FF3-258-3

  Data browser-->
  Proxy settings: N/A
  User Agent: Mozilla/4.0 (compatible; INTERNET EXPLORER 6.0; Win32)
  Default browser: C:\Program may Explorer\iexplore.exe
  Download signed ActiveX controls: fast
  Download unsigned ActiveX controls: disabled
  Run ActiveX controls and plug-ins: allowed
  Initialize and script ActiveX controls not marked as safe: disabled
  Allow the Internet Explorer Webbrowser control scripts: disabled
  Active scripting: allowed
  Recognized ActiveX controls safe for scripting: allowed

  Analysis of file data-->

  Other data-->
  Office details: {B2DCE8D6-2F18-4D48-A756-FF7B51E01AB2}1.9.0027.05.1.2600.2.00010100.3.0.prox 32*-*-*-*-YG2PG55711-007-5201427-223625S-1-5-21-823518204-1060284298-839522115GmbH innotekVirtualBoxGmbH innotekVirtualBox20061201000000.000000 + 0000471381701840059040 c040 cParis, Madrid(GMT+01:00)03109

  License data-->
  N/A

  Windows Activation Technologies-->
  N/A

  --> HWID data
  N/A

  Activation 1.0 data OEM-->
  BIOS string matches: Yes
  Marker of the BIOS string: 1071:Microsoft Corporation
  Marker of OEMBIOS string. DAT: N/a, hr = 0x80004005

  Activation 2.0 data OEM-->
  N/A

  Any idea on how I can get my XP VM to work?

  Yes, IE10 keeps the kids too. For FF, you should install Adblock Plus .
  Try an easy solution before throw us the kitchen sink everything to her.
  Download and run the patch to solve the problem with Microsoft Windows Update is not working.

  I would like to know how it works.

• When I started my computer this morning, it ran chkdsk at startup, windows startup it goes immediately to chkdsk, it will be repeated again and again. I can boot into safe mode, but if I try to start windows normally it runs chkdsk and does not start

  Windows does not start normally, just run chkdsk again and again

  First test the hard drive to make sure it's healthy. Test the hard drive with a diagnostic utility downloaded from site of the disc mftr. or use SeaTools for BACK of Seagate. You create a bootable CD with the files you download. You will need a third party burning software to do as the free ImgBurn, Nero or Roxio. Burn as an image, not in the form of data.

  http://www.ImgBurn.com

  http://www.Seagate.com/www/en-us/support/downloads/SeaTools/seatooldreg
  http://Seagate.custkb.com/Seagate/CRM/selfservice/search.jsp?docid=201271 (how-to)

  Boot with the CD that you have done and do a full test of the reader. The physical tests fail, replace it.

  If the hard drive then passes the physical tests, safe mode:
  Start > run > cmd [Enter]
  fsutil dirty query c: (or the appropriate drive letter) [Enter]

  This will tell you if the disc is dirty or not. Then always in cmd:

  chkntfs /x c: (or the appropriate drive letter) [Enter]

  This tells Windows not not to check this drive at startup. Reboot and it should go on the desktop. Once Windows loaded, run cmd and:

  Chkdsk /f /r c: (or the appropriate drive letter) [Enter]

  CHKDSK will run through all 5 steps. After that it's over, always in cmd:

  fsutil dirty query c: (or the appropriate drive letter) [Enter]

  to see that the dirty bit is not set on this drive.
  MS - MVP - Elephant Boy computers - don't panic!

• XFX nVidia GeForce 6200 256 MB hangs on Windows 7

  Hello my name is Ricardo and I'm having some trouble with the XFX nVidia GeForce 6200 256 MB graphics card when running Windows 7 in. The computer seems to hang after a certain time, or when you try to play a video file. There is no error message, it just hangs. The first symptom is a weak performance in the response of the mouse, the cursor moves too slowly across the screen. Then the screen blinks twice and remains with striped and jacquard everywhere. Finally, the screen goes black. Sometimes, if the failure is not too severe, my Office updates and wrote a message pop up: driver nVidia Geforce 197... has stopped working.

  I checked, the microsoft Web site, and he says the nVidia Geforce 6200 256 MB is fully compatible with Windows 7. I also tried different drivers, installation of the own driver and even the manufacturer of the card could not give me a solution to my problem.

  My specs are:

  AMD Sempron 2600 + mhZ

  1 GB OF DDR400 RAM

  180 GB SATA HDD

  nVidia Geforce 6200 256 MB

  Card mother PC CHIPS A31G V1.0

  (I've updated the system BIOS, drivers of all other devices are thus updated)

  HI Ricar2009,

  Thank you for your message.

  "When I use the Microsoft WDDM drivers by default, aero experience is much better, virtually free of frost.

  When the Compatibility Center says it's OK, he also said that no other software is required. In other words, that it is Plug-and-Play.

  Using the custom driver NVIDIA seems to pose a few problems, because they may be in conflict with another program.

  I suggest to perform a clean boot to see if a startup program can cause the problem.

  What size power supply do you use?

  The only Gig of RAM can definitely cause this issue when using the resource intensive applications.

  The RAM has write back on the hard disk, resulting in delays enough highlight the video card driver as it tries to buffer videos, games, etc.

  This would also explain the slowdown in the mouse, because the computer is stumbling to cope.

  Start up programs running in the background and can devour huge amounts of resources.

  Programs may sometimes have memory leaks that cause this as well.

  I suggest upgrading your RAM, if possible, if the clean boot does not help.

  Chris
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Frequently hangs in windows SP1

  Hello! I just built a new PC AMD: care as follows:

  GIGABYTE GA - 970-DS3P
  AMD FX 8350 4.0 GHz
  8 GB DDR3 1600 MHz
  EVGA supernova 750 W PSU
  Corsair Carbide SPEC-01
  Radeon R9 DD 280/3 GB
  EVo 250 GB ssd Samsung
  DVD burner
  ESD-wrist for anti-static

  The problem is inside windows, once I installed W7 SP1 in my system, ive had periodically hang ups, they last usually for 45 seconds. Disc Ive runned auditor, auditor of ram, cpu checker, started in safe mode, it didn't hang there, though even I was not in safe mode for a very long time well. I have also disabled all the services that doesent need to be enabled, disabled UAC, went into msconfig, using normal startup items.

  The error usually begin when I have many open application, but can also appear when I 0 open applications. No keyboard key work, only a hard reset works on the PC... I suggest software problem. Because when I go into the Task Manager there is usually more than process when kicked in the shot and then radically down when the computer is back...

  NB! ***
  -Ive lost my SSD in the soil before I built the PC.
  -I can still play games 24/7 without a gel

  It feels like is that I have ge inside windows errors. Have tried with every update, + the fix for freezing of the SP1 of windows. Nothing works so far. Help!

  All drivers up to date, except for the update of the bios because I can't update bios, something goes wrong and I can't update the bios.

  Just a reminder, this error doesent appear often, it happens rarely, maybe 2 times a day.

  Suffice to say if you need any error report logs, etc.. And I'll add them. Just explain how to make the newspapers.

  -Chris

  Chris

  We could use the observer event logs and you can run windows as described below performance recorder

  Please provide us with your administrative Event Viewer logs by following these steps:

  Click on Start Menu
  Type eventvwr in the find programs and files (do not hit enter)
  Click with the right button on eventvwr.exe and click Run as administrator
  Expand custom views
  Click the administrative events
  Right-click Administrative events
  Record all events in custom view as...
  Save them to a folder where you will remember which folder and save it as Errors.evtx
  Go where you saved Errors.evtx
  Make a right click Errors.evtx-> send to compressed (zipped) folder of->
  Download the .zip for Onedrive or a file sharing service file and link to it in your next post

  *

  If you have updated to win 8.1 and you get the error message " " " the system cannot find the specified file" it is a known problem.  The work around is to change the registry.  If you are not comfortable doing this DON'T.  If you are, save the key before making

  Press Win + 'R' and enter regedit

  Navigate to:
  HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\CurrentVersion\WINEVT\Channels. Delete "Microsoft-Windows-DxpTaskRingtone/analytical.

  In order to diagnose your problem, we need run Windows performance toolkit, the instructions that are in this wiki

  If you have any questions do not hesitate to ask

• How to use the chkdsk command in windows 7 its not working not not his poster error access denied

  Please help me about the chkdsk command to remove the windows command prompt 7...

  If you try to use chkdsk for C:\ partition, you cannot run that the disc must be disassembled for the operation, which is not possible with the C:\ partition (or the partition where Windows is installed).

  Instead, go on-> do work right click on the partition-> click Properties-> in the Properties dialog box, go to the Tools tab-> under error-checking, click check now... This will automatically set a check the next time you start Windows.

• Is there a way to see the old chkdsk log on windows 7 Home premium?

  You know, when you run the command CHKDSK's BACK to Windows 7 Home Premium at the end it is a summary of the results.  But the summary is only visible for a few monents (not long enough to actually read) and then the system moves to open a Windows session.  Is it possible to display these results once you are in the WIndows environment?  Some kind of log file that can be referred to?  I'm talking specifically of the complete CHKDSK with both the boxes checked

  "Automatically Fix file System Errors ' and ' will search for and attempt to recover bad sectors...

  Thank you.

  Newspapers can be read in the event viewer

  http://www.SevenForums.com/tutorials/96938-check-disk-chkdsk-read-Event-Viewer-log.html

• Install hangs on Windows XP flag

  I'm trying to install the all-in-one software for a PSC 1350 on our two PCs, which are be HP pavilions with XP SP3. On my PC the things went perfectly using the last downloaded package. But on my wife's PC Setup hangs systematically at an early stage where the window is said "Global Progress - installation step 3/4 of 5%" and "status - additional software installation.

  I tried this several times using the original CD so the downloaded drivers. I also did some research and did a cleaning by using the procedure in "level 3 Uninstall" (L3_Uninstall.bat), but the installation crashes always.

  I think it would be complete OK so I just installed the basic printer drivers, but then there is no software installed to make better use of the scanner. Is there any hope here? I'm rarely stumped by computer problems, so it becomes very frustrating.

  Sorry, I should have looked before poster. The indication provided by DexterM (I think) to kill the process Wrapper.exe was the solution. As I was in the forum, my wife's PC had been sitting on the other office hung for about half an hour. I went to the wire and killed Wrapper.exe and the installation took immediately!

  Thank you, thank you, thank you!

• Acrobat PDF printer hangs in Windows 8

  I am running Windows 8 Enterprise RTM 64 bit on a 3rd generation of Intel i7-3770 CPU, chipset Z77. I found that most of the PDF printers I've used on Windows 7 now hang on 8, including the printer Acrobat X (latest version). I found a free alternative that works very well, but I would go back to using the Acrobat printer. Adobe will release an update that resolves the blow?

  Above is a screenshot of total more than ten minutes:

  Got, it works. Here is the configuration in printer properties that just printed out OK in Word 2010 and CorelDraw X 6. Will have to try other programs:

  

  The change was to make the final spooled print ONCE. (Hang by default start printing immediately?). In addition, this time I checked activate printing advanced features, that I had not tried before. (I had also turned on some features of IIS, but cannot see that would have been a factor).

  Am really happy to get this resolved!

• Reference Dell PERC H710P: Firmware hangs on Windows RTM 8.1 with the default driver

  My H710P Dell (with the last FW A04) PERC was working completely fine with the driver 5.2.220.64 on Windows 8, until recently, I tried installing Windows RTM 8.1 on the machine, it caused hang FW at the launch of the Windows installation:

  266	[Information, 0]	05 seconds restart	Controller ID: 0 edge revision: A01	1367
  261	[Information, 0]	05 seconds restart	Controller ID: 0 Package version 21.2.0 - 0007	1366
  141	[Information, 0]	05 seconds restart	Controller ID: 0 battery present	1365
  1	[Information, 0]	04 seconds restart	Controller ID: 0 Image version: 3.130.05 - 2086	1364
  0	[Information, 0]	04 seconds restart	Controller ID: 0 has started the initialization of the Firmware: (PCI ID 0x5b / 0x1000 / 0x1f31 / 0 x 1028)	1363
  15	[Fatal, 3]	2013-09-11 21:00:27	Controller ID: 0 Fatal firmware error of: line 1232 in... /... /RAID/1078dma.c	1362
  15	[Fatal, 3]	2013-09-11 21:00:27	Controller ID: 0 Fatal firmware error of: line 1232 in... /... /RAID/1078dma.c	1361
  15	[Fatal, 3]	2013-09-11 21:00:27	Controller ID: 0 Fatal firmware error of: driver has detected possible FW, FW to stop blocking.	1360
  389	[Information, 0]	2013-09-11, 20:57:11	Controller ID: 0 host driver is loaded and operational	1359
  44	[Information, 0]	2013-09-11 20:56:33	Controller ID: 0 time established for power: time 2013-09-11 20:56:33 34 seconds	1358

  Windows 8.1 was delivered with the version of the downloadable 6.801.5.0 driver from Dell, I also tried and committed in my opinion the FW even hanging the question.

  I'm afraid - anyone know what is happening?

  See you soon

  Chris

  Appearantly this is related to the latest driver from Dell. I've found a workaround, but it's a bit complicated:

  1 connect a USB stick which is big enough

  2. install Wndows 8.1 on the * USB drive *.

  3. start Windows, and then remove the current driver and install the previous driver for Windows Server 2012.

  4. use the 3rd party software (say that Ghost) to copy the windows from USB drive to VD on Dell PERC H710P controller.

  5. start Windows in the USB drive again and use 'bcdedit' to clean boot stuff

  in any case, I'm LSI 9361-8i, so it won't be a problem for me in the future...

• Hangs at Windows startup

  Product name: Folio 13-1008TU

  "Problem: the computer crashes: windows startup" sceen for 3-4 minutes before moving on to the login screen. After that, it works normally. :

  I tried to do a hard reset but it made no difference.

  I ran the system diagnostics and the DST failed with the following default ID:

  U3XP64-5TD796-XD7V4K-60WQ03

  Normally, the 'Starting Windows' screen would clearly after a few seconds and the login screen appears.

  Despite the failure of the DST, I seem to be able to access the files from my drive C:, Internet access and use the computer normally, once the login screen appears. I also noticed the login screen finally appears shortly after the WiFi light on orange white F12 key changes.

  Can someone help me diagnose this problem and propose a solution, bearing in mind that the hard reset does not solve the problem.

  Thank you

  XpatScot

  Dear customer,

  Welcome and thanks for posting your question on the Forum of Support HP

  Looks like you're not able to boot into the operating system of your laptop

  Please Contact HP if your HP laptop is under warranty, HP could replace the hard drive and give you the

  Recovery media to restore the operating system to factory after the replacement (if you have not yet created recovery disks/USB support)

  According to the message that you have posted, it shows that you have found the alphanumeric error code numbers 24 'U3XP64-5TD796-XD7V4K-60WQ03. If you get 24 characters alphanumeric ID failed, then it is time to replace the hard drive with a new

  Back up any personal data on an external drive if possible. Otherwise, you can connect the HDD defective via SATA USB adapter with another PC or a PC even after replacing the HARD drive & put in place of the operating system and try to copy / retrieve files.

  I highly recommend the assistance of HP immediately by phone to get help without delay to get your Notebook diagnosed and repaired by an authorized HP Certified Engineer

  You can check your warranty here to check the status and click here to order a new hard drive

  Hope this helps, for other queries in response to the post and feel free to join us again

  * Click on the star of CONGRATULATIONS on the left to say thank you *.

  Make it easier for others to find solutions by checking a response "Accept as Solution" if it solves your problem.

  Thank you

  K N R K

  I work on behalf of HP

• Visual Studio 2010 Express hangs after Windows Update

  June 11, 2010, I have 19 updates from Windows Update for my Windows XP Home SP3 Swedish (exceptionally many using the computer every day). After I rebooted, Visual Studio 2010 Express crashed at startup saying "(défini par l'utilisateur point d'arrêt-un point d'arrêt dans une application indique erreur de programme)." Re - installation of VS) did not help. Being run/scannow CFS does not report a problem any. Run the program in WinDbg, the program stops at a breakpoint in ntdll.dll. However, if I then go into the debugger program seems to operate normally. Also authorized the virus program Norton Internet Security (NIS) fails on startup with breakpoint in ntdll.dll. This should indicate that there was a problem with ntdll.dll, but all the tests that I ran to the DLL files are all problems. Other programs on the computer seem to work normally, including AVG 9.0 free virus checker, I installed to compensate for the NIS. NIS experts spent several hours in my computer without finding the reason. All clever out there who can help me?

  The problem is solved!

  I run the SDK Direct-X (latest version) in Debug mode and when I changed the retail fashion problems disappeared. Since there is no problem with Debug mode, before the updates of Windows, I guess that these updates were not compatible with debugging DLLs in the SDK. MS has probably forgotten to test in Debug mode or something. Instead however, annoying because the Debug mode is useful during the development of applications of DX.