Choose a processor

Similar Questions

• How to choose the processor (Intel / nVidia) will launch a program?

  Hello dear friends,

  I would like to know if there is a way to choose in what processor (Intel CPU or GPU nVidia), a specific program will be started.

  In Windows computers, control panel see the nVidia drivers will be an option to set in which processor each program uses to start.

  I saw in Mac Java starts automatically using the nVidia GPU.

  Then, someone knows something?

  Thank you very much!!!

  Leonardo (Brazil).

  Set the graphics performance on MacBook Pro

  https://support.Apple.com/en-us/HT202043

  Best.

• M processor

  How to choose which processor buy, M5 and M7?

  i5 or i7

  The i7 is the most powerful, the i5 is cheaper

• Pavilion 17-e020us: HP Pavilion 17-e020us card mother/processor upgrade Question

  Hello

  I think to upgrade the motherboard on my HP Pavilion PC 17 - e020us.  The manual (http://h10032.www1.hp.com/ctg/Manual/c04069163.pdf) contains a list of supported processors, and I'm not sure that we choose.  The computer currently has a processor Intel Core i3 - 3110M with 10 64 - bit Windows.  I am deciding between the Intel Core i7-3632QM and the Intel Core i5 - 3230M processor (the processor TDP should be 35 w or I have to get a new power supply).  You can view a comparison between the two processors and the currently in the system here: http://ark.intel.com/compare/71670, 72056,65700.  Although the i7 has a lower base frequency, it has more hearts; the reverse is true for the i5.  Could you please tell me what CPU should I choose (I'll get the corresponding motherboard)?  Here are the main things I've done on the PC: web navigation on board or Chrome, using Microsoft Office and software development with Microsoft Visual Studio 2015 (which means that I often use of the Tablet and mobile emulators to test my application - it means also I need to compile quickly and be good with graphics rendering (for design applications/Games)).

  In addition, please could you me of those in the manual of the motherboard (34 in PDF of page, page is numbered 24 down to the left)?

  Thank you very much to all who have responded.

  Hello

  Normally we use the rule of 3 C to choose a processor. They are Cache, Core and clock. In this case, I'd choose processor 6 MB Cache. It also has more Core and clock is a little slower but a lot of applications, the slowdown factor is not processor but another factor, namely the HARD disk.

  Kind regards.

• dv2315nr: best processor that will work with my HP Pavilion dv2315nr

  Hi guys... I wnt to put my cpu at level... I wonder if you could help me choose which processor shopuld?...

  You have a Turion ML-52, and it will take a TL-60 on the same motherboard. Here is the Service Manual:

  Your manual

  I see several reasons not to do this, including the fact that it tops out at 2 GB of RAM that is simply not enough for the needs of today ' today... There is a long history of failure of the motherboard on the AMD/nVidia models, and the upgrade of a 1.6 ghz to 2.0 ghz processor will not make a big difference. The laptop is 8 years old now and may have earned the right to retire. I don't see examples of work very often more but they have a room full of dead.

  But the processor would be cheap and can't really hurt anything other that it will run a little warmer and can just might die a bit sooner. If you must: go ahead.

  http://www.eBay.com/ITM/AMD-TMDTL60HAX5DM-TL-60-Turion-64X2-CPU-processor-2-0GHz-dual-core-socket-S1-/191107029893?PT=LH_DefaultDomain_0&hash=item2c7edddb85

  If it's 'the Answer' please click on 'Accept as Solution' to help others find it.

• Pavilion Elite HPE - 380t: Pavilion Elite HPE - 380 t cpu upgrade options?

  What are my options for upgrading CPU?

  http://support.HP.com/us-en/document/c02250428

  Thank you

  @mpjbay, welcome to the forum.

  This is supported by the motherboard and HP processor upgrades:

  TDP: 130W
  Motherboard supports the following processor upgrades:

  Intel Core i7 9xx series (Bloomfield, includes Extreme Edition)

  The TDP is very important when choosing a processor upgrade.

  These are the options that you had to choose when you bought the computer:

  Must select one of the following options:
  Core-i7-930 (B) (130W)
  Core-i7-950 (B) (130W)
  Core-i7-960 (B) (130W)
  Core-i7-975EE (B) (130W)
  Core-i7-980 X EE (G) (130W)

  Please click on the button + Thumbs up if I helped you and click on accept as Solution If your problem is resolved.

• What CPU is compatible with 650 d - 10 k?

  Now installed AMD V120, 2200 MHz. She is very weak. I would like to install 2 hearts.

  Take a look at other models C650D, choose more processor in this beach. It should work fine in your laptop.

• P70 Intel HD 530 display driver igfx stopped responding and has successfully recovered.

  Once or twice during the day I get a black screen and then a notification Windows 10 saying "display driver stopped responding and has recovered.

  In which case the log, the following event is recorded: "display driver igfx stopped responding and has successfully recovered."

  I updated the Intel graphics driver via windows 20.19.15.4352 mechanism and the frequency of the message seems to be reduced. However I understand 3-5 times a day.

  Go to control PANEL, then select MANAGER of DEVICES. Then select the selection of GRAPHICS cards. You should see Intel(r) HD GRAPHICS 530 and NVIDIA QUADRO M600M. For each, open (by double clicking), select UPDATE DRIVER and select SEARCH AUTOMATICALLY for UPDATED DRIVER SOFTWARE. There should be updates for each.

  When both are installed, stop and restart. After the reboot, you may need to go into control PANEL, then select NVIDIA control PANEL. Select MANAGE 3D SETTINGS. Under FAVORITE the CPU GRAPH, select SELECTION AUTOMATIC, and then click APPLY. (If you are still running on AC you can choose NVIDIA PROCESSOR HIGH PERFORMANCE).

• How to add basic IO to KEIL MCB2300?

  Hello

  I sought the help of LabVIEW Embedded for basic I/O adding file.

  But I failed to add I/O.

  EIODevice baccalaureate in law does not recognize the device, MCB2300 or MCB2300G or MCB2370 or with a dash between when I want to even display the data.

  For example, I wanted to show pins.

  Does anyone know how to add basic i/o to this paricular unit?

  Because it came more digital and analog available on the device, but not in the evaluation kit in LabVIEW.

  I am a novice in such things. Fool proof answers are appreciated.

  With sincere friendships.

  Houria

  Hi John,.

  It is true that the e/s by default you can use and view are those detailed by the Evaluation Committee.  If you are eager to see that all the I/O possible points of the processor (including those not detailed by the Evaluation Committee), then this is the process:

  (1) create a new ARM project.  Instead of select MCB2300, select other than the target Type.
  (2) select your processor (Philips NXP LPC2378).
  (3) right click on your target, select select Basic IO, then choose your processor (Generic MCB2300).
  (4) make a right click on your target, select New' Basic IO.

  You can now see all the possible points of I/O for the processor.  You can always control the LEDs, etc..  It's just that each pin has not been renamed for ease of use.

  We invite you to look at the underlying code in order to develop a similar configuration for a new processor.  The process for the visualization of all o elementary for Blackfin processor is essentially identical to that as well.

  I hope this helps.

  Kevin S.

  Technical sales engineer

  National Instruments

• Freeze in the computer

  Guys, I'm getting a lot of gel in my computer. I can't play games, watch YouTube videos properly. A program that allows to start 1 minute now hold 3 minutes. I know that it is now a problem of overheating or viruses. Please help me!

  What I did and after it has passed:

  I changed my number of processor by Msconfig > Boot > advanced and choose 8 processors. I then changed once again to 1 CPU. But it slowed down my computer. That's why I wanted to change again to 8 processors, but now I see there is only 1 processor. I restarted my computer, but there is always 1 processor. Where is my other 7 processor.

  Model n ° of my laptop: HP DV7

  PROCESSOR: Intel Core i7-2670QM CPU @ 2.20 GHz 2.19 GHz

  RAM: 4 GB

  SYSTEM TYPE: 64-bit Operating System

  Windows 7

  Thank you.

  Hoping for a Positive answer!

  Hello

  Hold down the Windows key and press R.  In the run box, type msconfig and press ENTER.  In Windows System Configuration, click on the Startup tab, and then click the Advanced Options button.  If there is still a check mark in the box 'Number of processors', click the box to Remove , click OK, click apply and then click OK in the previous window and then restart the computer for the change to take effect.

  Kind regards

  DP - K

• Updated the Core i3 - 2330M to the Core i7 - 2620M?

  Hello Expert, I hope to hear good news from your part

  but, but, I'm confused

  can I upgrade my processor Compaq Presario CQ43-422TU, Core i3 - 2330M for the fastest Core i7 - 2620M. I already saw that both have the same socket, which is FCBGA1023, PPGA988

  If my new processor supports all the material in my laptop?
  Problems which may seem if I replace it?

  And to replace the ideal solution to improve the performance of my laptop?

  Thanks before

  Oh I know now, but if I want to choose the processor in this photo, he's going to fit my laptop?

  

  because when I saw on the internet, core i5 - 2450 m and Core i3 2330 M, they have another taken, can I replace it?

• Aurora-R5, SLI Nvidia GTX 1080, 850w PSU enough?

  Hi guys!

  The new R5-Aurora looks great, so I'm considering buying one, but I have a question about 1080GTX SLI setting. I would buy the 5 k monitor from Dell (UP2715K) as well. So I'd better feed this beast with the installation of 1080GTX SLI! BUT, I knew the Aurora-R5 only comes with a PSU 850w (power supply unit). Is this enough? On area 51 - R2 page noted that it comes with a 1500w power supply to ensure that the SLI Nvidia GTX 1080 configuration has enough power. So how can the Aurora-R5 works correctly with only 850w?

  Useful information for configuring, I would buy:

  6700 K overclocked I7
  32 GB OF RAM
  500SSD + 2 TB
  Blu - Ray read/write
  SLI 1080GTX

  A big thank you!

  When you choose one of the processors (i7 - 6700K, i5 - 6600K) K, you will need to choose the power 850w multi-GPU approved with the high Peformance liquid of cooling that can perform one of the following OEM video cards in a dual configuration.

  

  Nvidia GeForce GTX RTYN6 1080 founders edition, Pascal, 8GB, DVI-D/DP1.4/DP1.4/DP1.4/HDMI 2. 0 b, double/single
  The founders of Nvidia GeForce GTX 1070 edition 6F651, Pascal, 8GB, DVI-D/DP1.4/DP1.4/DP1.4/HDMI 2. 0 b, double/single
  5NN03 Nvidia GeForce GTX 980 Ti, D17U-40, 6 GB memory GDDR5 DVI-I/DP/DP/DP/HDMI, double/single
  YJ30F Nvidia GeForce GTX 980, 4 GB memory GDDR5 DVI-I/DP/DP/DP/HDMI
  RW8C2 Nvidia GeForce GTX 970, 4 GB memory GDDR5 DVI-I/DP/DP/DP/HDMI, double/single
  H4P1K Nvidia GeForce GTX 960, 2 GB memory GDDR5 DVI-I/DP/DP/DP/HDMI, double/single
  C58PP Nvidia GeForce GTX 950, 2 GB memory GDDR5 DVI-I/DP/DP/DP/HDMI, double/single
  YX6VC AMD R9 370, RD14D-P1-70, 4 GB memory GDDR5, double/single DVI-I/DVI-D/DP/HDMI

  If the user chooses the processors non - K (i7-6700, 6400-i5, i3-6100), they can always choose the multi-GPU 850w power supply and run installation dual video card.

• [Workstation 12] Cannot install Windows 10 Professional x 64 (RESOLVED)

  I think it would be a pretty normal scenario but I can't finish one out of the box of Windows 10 Professional x 64 installation.

  1. I mount my ISO and read the notification "Could not detect which operating system is in this image to disk." and click Next.
  2. I chose Windows 10 x 64 that the version since it is what it is, and then choose the location.
  3. I choose the type of BIOS firmware as EFI would not work.
  4. I choose 1 processor with 2 hearts.
  5. I chose 8192 MB RAM.
  6. I chose NAT for networking.
  7. I chose LSI Logic SAS because it's my only choice, the two other State not supported.
  8. I chose (recommended) SCSI
     1. I also tried IDE
     2. I also tried SATA

  Installation of Windows 10 starts and basically, it runs until it asks for a driver, probably because he feels like he can't install on a disk. I mounted the ISO VMware tools to see if he had any useful drivers, but it did not.

  I then installed again and point 8, I chose SATA and it did not have a difference however run diskpart shows that a drive is available! I've added another car also, an IDE, the same hard drive, now I see two drives but I can not install either!

  What everyone by installing Windows 10? I expect, it is a breeze as all the other BONES, and considering how many people are commenting on VMware with Windows 10, I can't wait for each VMware Workstation user jumped through hoops to make it work... it's frustrating!

  Thanks in advance.

  Hello

  Your image ISO of Windows 10 is almost certainly corrupt.  Check the size of the file and the MD5 or SHA1 checksums against those who are posted to the Microsoft Download page and maybe download a new copy.

  12 workstation will not report "not able to detect which operating system is in this disk image" for a picture of Windows 10 ISO complete and valid.

  See you soon,.

  --

  Darius

• All the 3D shaded in CC2015 options

  I did search long enough, it's time to ask you.

  
  I'm just starting to play with 3D for the first time, but I can't yet begin the first steps to convert anything in 3D because 3D options are grayed out.

  I did some research and my video card seems to be MORE than capable (GeForce GTX 770).

  I'm doing something wrong, like a beginner in 3D? I have created playlists, tried dynamic objects, non-smart objects, text... I am at a loss.

  Attached are the screenshots of my performance and 3D preferences settings.

  

  

  Try setting the Nvidia card as the preferred card. Here's how:

  (1) right click on desktop and choose 'NVIDIA control settings.

  (2) look on the left under

  --> 3D settings manage 3D settings

  Now you have 2 tabs GLOBAL SETTINGS and the SETTINGS of the PROGRAM.

  On the GENERAL SETTINGS under "Preferred graphic processor" tab choose "High Performance NVIDIA processor". Do not change any other details on this tab.

  Now, under the PARAMETERS of the PROGRAM tab

  Click on the ADD button, which will be asked to browse for the program you want.

  Add sniffer.exe and Photoshop.exe (from C:\Program Files\Adobe\Adobe Photoshop CC 2015).

  Click on each ".exe" file and click OK, under "select the graphic processor preferred for this program", choose "NVIDIA processor high performance.

  (If there are any) click OK to save changes and you're done.

  Next time when you restart Windows and open Photoshop it will be managed by the NVIDIA card.

• HP Compaq 615: How to upgrade and choose compatible HP - Compaq 615 processor?

  Hello

  I have laptop Hp Compaq 615 (I know it's been 8 years until now and my baby still running like a champ. I can't give up on this subject) lately, I upgraded my RAM and everything went great. I decided to upgrade my processor too but I know that it's more complicated process, so I'm here to get the best advice. What is the compatible processor that can fit in my laptop.

  HP Compaq 615

  Processor: AMD Sempron if-42 2.10 GHz

  Memory RAM: 4.00 GB

  OS: Win 7 Pro 46 bits

  Pleaes guys help out me.

  Thank you 1 million.

  Here is the Service Manual:

  Manual

  It's your best processor:

  Turion™ RM-74 2.20 GHz processor, 1 MB L2 Cache memory

  $14.50 on eBay:

  http://www.eBay.com/ITM/new-AMD-TURION-TMRM74DAM22GG-dual-core-2-2GHz-CPU-processor-RM74-/171226481434?PT=LH_DefaultDomain_0&hash=item27dde4c31a

  For instructions on replacing the processor page 4-49.

  If it's 'the Answer' please click on 'Accept as Solution' to help others find it.