choose Start and end in time for the ashes report

Similar Questions

• Since the update to firefox 10.0 (and then 10.0.1), the bottom of the Page, the Page Up keys, start and end work correctly. Is that what someone else has this problem, and are there any suggestions for a fix?

  for example, I read a Web page, when I push the bottom of the keyboard Page, sometimes nothing happens. Sometimes the page scroll a few lines but then does not continue to scroll down when I push the key several times. Sometimes the page immediately jumps to the bottom of the page; etc. Similar issues occur, in the direction towards the top, when I press the Page up key. The keys start and end are completely "dead", because the page does not move when I press them.
  It is important to note that all these keys work as usual when I open the browser Chrome or Internet Explorer, and other applications in which keys should be functional, so this problem is specific to Firefox.

  Hello

  Please check if still use the keys cursor to navigate through the pages is selected in Tools (Alt + T) > Options > Advanced > general and uncheck. This setting can also be turned on/off by pressing F7.

• Need help to calculate the start and end time and place the result in a term like text box

  I did a search on the forum for calculating start and end time and found the code depending on which I am using as a formcalc on the duration field.
  ==============================================================
  Form1. Page1.duration::calculate - (FormCalc, client)
  
  If (HasValue (StartTime) and HasValue (EndTime)) then
  industrial var = Time2Num (StartTime.formattedValue, "h: mm A")
  var = Time2Num out_ (EndTime.formattedValue, "h: mm A")
  If (IN2 > = out_) then
  xfa.host.messageBox ("start time cannot be greater than or equal to the end time.")
  $.rawValue = null
  on the other
  var out_ - IN2 = diff
  $.rawValue = diff/3600000
  endif
  on the other
  $.rawValue = null
  endif
  =============================================================
  
  Then, when I enter for example from 15:30, an hour of beginning and end of 04:00
  
  The duration field will say 0.5
  
  How can I get my form to say 30 minutes instead of placing a decimal?
  
  Secondly, how can I use field models LC where the employee can just type 330 or 03:30 and it automatically based on the computer's clock on time to start 15:30?
  
  Any help will be greatly appreciated.  Thank you.

  Attached is the form for display:

  https://Acrobat.com/#d=f1kxh5qjuow5ujyZduF8OQ

  To view the results in a regular time format, you can use:

  $.rawValue = Num2Time (diff/3600000, "HH: mm")

  For a flexible time entry check this example.

  http://thelivecycle.blogspot.com/2011/05/flexible-Eingabe-von-Daten-und-Zeiten.html

• Time of start and end elements

  Hey there,
  I have an application where I need two elements of time. I can hard code the data once and use a Select list, but this link below by Daniel McGhan is the way to go. Does anyone know how to access this code for the start and end time the elements? The article does not list how this is possible, but I can have over looked something... not sure. Thank you for reading this Thread.

  http://apex.shellprompt.net/pls/apex/f?p=566:4:198609458994020::NO:::

  Hello:

  Now sure to know how this was done, but it seems as likely javascript.

  There is a very cool JQuery Timepicker that I really like and in fact for a really nice interface:

  http://Haineault.com/Media/jQuery/UI-timepickr/page/

  Kind regards

  Bruce

• How does the index start and end in the reference Word text VI to a word document?

  How a correlation between the index values start and end to a position or coordinate in a Word document?

  Is it a type of lookup table that will refer to a value of say '35' (to start) to a line or a particular character of the position in a Word document? There is nothing in LV help which explains nothing other than the value '-1 '.

  Hey, JayB,.

  The start and end of the Text.vi in Format Word values are the positions of the characters in the document. The values start at 0 on the first (or ASCII character such as a space, tab, or carriage return) and for each character (or the ASCII character). So for example if I wanted to "BOLD" the word "carrots" in the list below, where the values start at 0 on the word 'grocery store '.

  Grocery store:

  Apples

  Black berries

  Carrots

  Detergent

  Then I would enter a start 33 and the end of the 40s, making sure to count the ramasseherbe returns and spaces.

  I hope this helps.

  Logan H

• Photoshop CC 2015 is a line connecting the start and end of the brush strokes

  Hi guys,.

  I had a strange problem with a certain brush (size 5px, difficult tour, no shape dynamics, no transfer) in Photoshop CC 2015.1.2.

  It only happens when the drawing very fast on my Cintiq 22HD.

  The problem is PS is a line connecting the start and end of the brush strokes. I don't hold in shift or whatever it is.

  

  Here's my brush settings:
  

  I use a PC with these specs:

  Intel Core i7 - 4790 K 4.00 GHz

  ASUS motherboard

  NVIDIA GeForce GTX 970 (10.18.13.5354 driver version)

  16 GB OF RAM

  Cintiq 22HD

  Win 10
  

  Is it a question of PS or Cintiq?

  Thanks for help.

  OK, here is therefore an update.

  The problem is not at all with Photoshop or Cintiq, with Windows 10 parameters of the stylus.

  Fortunately, there is a small piece of free software that you can download called "Fix my pen" (by Smith Reddy) which defines the features of Windows Tablet PC in the registry for you (essentially by disabling everything related to it):

  viziblr - News - difficulty my pen makes your Wacom tablet JUST WORK on Windows 7

  It works fine on Win10 too.

  Now, as my original problem with Photoshop to do a line connecting the start and end of the brush strokes left, however I have another question more small that came after running difficulty my pen. The lines that I draw now are not smoothed by a software more. You can see the difference below.

  

  Fix My Pen sets a lot of things in the registry, but you cannot individually control which setting is disabled. So I guess that one of them is the cause.

  

  I expect response from Smith about it, cause I have no idea who he is.

• Primavera P6 API - start and end dates of the activity in the secondary reference scenario

  How to seek early and dates of activity in the secondary database or tertiary reference end? There are areas of activities and methods provided in planning extraction and primary base line project (active class getBaseline1StartDate(), getBaseline1FinishDate) but can't find any secondary data or tertiary basis even if we show them in details the activity in the Primavera. I use Primavera integration API version 8.2.

  Use the BaselineProjectHelper class to get a list of all the base lines for a given project.  Go through the list looking for basic lines you are interested in.

  Once you have basic interest projects, pull a list of ongoing project activities.

  Browse the list of activities tearing you start and end dates.

  Call the method on each of you loadBaselineActivity of reference projects for the departure of the referenced activity and end dates.

  For performance, seek assistance loadBaselineActivities to reduce database queries.

  V/r,

  Gene

• Why threads start and end at random?

  Hello
  
  I had the program below. I wonder why mark the beginning of discussions and put an end to chance? Every time I run the program, it produces different results.
  
  I know these four threads have gotten the same priority normal (or 5) and under windows, there is only something called timeslice. These four threads then turn using this timeslice. How do we know what exactly the timeslice is in seconds? If the timeslice is fix, then why are the results random?
  
  Thanks in advance!
  
  /*
  * To change this template, choose Tools | Templates
  * and open the template in the editor.
  */
  package mythreadone;
  
  /**
  *
  Administrator of * @author
  */
  / public class MyThreadOne implements Runnable {}
  
  String tName;
  Thread t;
  
  MyThreadOne (String threadName) {}
  tNom = threadName;
  t = new Thread (this, tNom);
  t.Start ();
  }
  
  public void run() {}
  try {}
  System.out.println ("Thread:" + tName);
  Thread.Sleep (2000);
  } catch (InterruptedException e) {}
  System.out.println ("Exception: thread")
  tNom + "interrupted");
  }
  System.out.println ("completed thread:" + tName);
  }
  
  Public Shared Sub main (String [] args) {}
  
  Why threads start and end at random?
  new MyThreadOne("1");
  new MyThreadOne("2");
  new MyThreadOne("3");
  new MyThreadOne("4");
  try {}
  Thread.Sleep (10000);
  Thread.Sleep (2000);
  } catch (InterruptedException e) {}
  System.out.println)
  "" Exception: main Thread interrupted. ");"
  }
  System.out.println)
  "' Complete thread: main thread."); "
  }
  }
  
  
  1. first of all, I put in the main function:
  
  Thread.Sleep (10000);
  
  and I run the program it gives:
  
  Thread: 1
  Thread: 4
  Thread: 2
  Thread: 3
  Wire termination: 1
  Wire termination: 3
  Wire termination: 4
  Complete thread: 2
  Complete thread: main thread.
  BUILD successful (total time: 10 seconds)
  
  Run it again, it gives:
  
  Thread: 2
  Thread: 4
  Thread: 3
  Thread: 1
  Complete thread: 2
  Wire termination: 1
  Wire termination: 3
  Wire termination: 4
  Complete thread: main thread.
  BUILD successful (total time: 10 seconds)
  
  And my question is why it displays like this? It suppose to be:
  
  Thread: 1
  Thread: 2
  Thread: 3
  Thread: 4
  Wire termination: 1
  Complete thread: 2
  Wire termination: 3
  Wire termination: 4
  Complete thread: main thread.
  BUILD successful (total time: 10 seconds)
  
  Why these four threads begin and end at random whenever I run the program? I use Windows, assume that there is a timeslice (i.e. 1 second), these discussions have the same priority. Then the son must begin and end in turn one. Am I wrong?
  
  2. my second question is:
  
  When I change the codes of the 'main' function, in:
  
  Thread.Sleep (10000); -> Thread.sleep (2000);
  
  It gives me the results as:
  
  Thread: 1
  Thread: 4
  Thread: 3
  Thread: 2
  Complete thread: main thread.
  Wire termination: 1
  Wire termination: 4
  Wire termination: 3
  Complete thread: 2
  BUILD successful (total time: 2 seconds)
  
  Run it again:
  
  Thread: 1
  Thread: 2
  Thread: 3
  Thread: 4
  Wire termination: 3
  Complete thread: main thread.
  Wire termination: 4
  Complete thread: 2
  Wire termination: 1
  BUILD successful (total time: 2 seconds)
  
  I tried several times. The main thread always ends before or after the first child thread over.
  
  My question is why he didn't come out something like:
  
  Thread: 1
  Thread: 2
  Thread: 3
  Thread: 4
  Wire termination: 3
  Wire termination: 4
  Complete thread: 2
  Complete thread: main thread.
  Wire termination: 1
  BUILD successful (total time: 2 seconds)
  
  or
  
  Thread: 1
  Thread: 2
  Thread: 3
  Thread: 4
  Wire termination: 3
  Wire termination: 4
  Complete thread: 2
  Wire termination: 1
  Complete thread: main thread.
  BUILD successful (total time: 2 seconds)

  user13476736 wrote:
  You can specify the reason please? See you soon.

  It's pretty simple. Start-up and execution of threads are not an operation of determenistic on operating systems that do not support hard real-time requirements. (Most operating systems do not support hard real-time requirements)

• Can I add start and end dates to flex in WCS assets?

  Hi all

  I have to add the start and end dates to my flex belt and make it visible on the plus edition + inspect mode. For the Fund, it is STANDARD, but I have an obligation to do so for other assets that is not active promotion.

  Is there any doc/blog I can do? Help, please.

  Hi Avi.

  Dates of start and end standards are OOTB field in the metadata of the asset. So they you must set the cs.sitepreview property in the file futuretense.ini in the 'management '.

  CS.sitepreview = ContentManagement

  You can check out the documentation for more details about this property: futuretense.ini - 11 g Release 1 (11.1.1.8.0)

  If you need something different, maybe you need create your own attributes Start Date and end using types date: Data Design: active models - 11 g Release 1 (11.1.1.8.0)

  Kind regards

  Raul.

• Grouping based on start and end of year

  Hi all
  
  Need your help to solve a SQL query
  
  My data like this look
  
  year of CID rid
  52 1000 2001 1
  52 1000 2002 1
  52 1000 2003 6
  52 1000 2004 6
  52 1000 2005 6
  52 1000 2007 1
  52 1001 2003 1
  52 1001 2004 1
  52 1001 2005 1
  52 1001 2006 3
  52 1001 2007 3
  
  I need to produce the output is
  
  CID RID TITLE START AND END
  52 1000 2001 - 2002 1
  52 1000 2003 - 2005 6
  52 1000 2007 - 2007 1
  52 1001 2003 - 2005 1
  52 1001 2006 - 2007 3
  -----------
  Here's the script for the table and data
  
  create table T)
  CID NUMBER,
  rid the NUMBER,
  start_year NUMBER,
  title NUMBER
  );
  
  Insert into t (cid, RID, start_year, title) values (52, 1000, 2001, 1).
  Insert into t (cid, RID, start_year, title) values (52, 1000, 2002, 1).
  Insert into t (cid, RID, start_year, title) values (52, 1001, 2003, 1);
  Insert into t (cid, RID, start_year, title) values (52, 1000, 2003, 6);
  Insert into t (cid, RID, start_year, title) values (52, 1001, 2004, 1);
  Insert into t (cid, RID, start_year, title) values (52, 1000, 2004, 6);
  Insert into t (cid, RID, start_year, title) values (52, 1001, 2005, 1).
  Insert into t (cid, RID, start_year, title) values (52, 1000, 2005, 6);
  Insert into t (cid, RID, start_year, title) values (52, 1001, 2006, 3);
  Insert into t (cid, RID, start_year, title) values (52, 1001, 2007, 3);
  Insert into t (cid, RID, start_year, title) values (52, 1000, 2007, 1);
  
  commit;
  
  I managed to go as far (some as close to what I need but not exactly what I need)
  
  Select the title, max (year1), min (year2), cid, RID
  de)
  Select tc.cid, tc.rid, tc.title, tc.start_year year1, year2, tp.start_year, decode (tc.title, tp.title, 'n', 'Y') gap
  t tc,.
  t tp
  where tc.start_year - 1 = tp.start_year
  and tc.cid = tp.cid
  and tc.rid = tp.rid
  )
  Cid group, RID, title, gap
  
  
  Thank you for thinking
  
  Ngoyi,
  
  Houston-Texas

  Hi, Ngoyi,

  Here's one way:

  WITH      got_grp_id     AS
  (
       SELECT     cid, rid, start_year, title
       ,     ROW_NUMBER () OVER ( PARTITION BY  cid, rid
                                 ORDER BY          start_year
                         )
             -     ROW_NUMBER () OVER ( PARTITION BY  cid, rid, title
                                 ORDER BY          start_year
                         )         AS grp_id
       FROM    t
  )
  SELECT       cid
  ,       rid
  ,       MIN (start_year) || '-'
                          || MAX (start_year)     AS start_end
  ,       title
  FROM       got_grp_id
  GROUP BY  cid, rid, title, grp_id
  ORDER BY  cid, rid, start_end
  ;
  

  Thanks for posting the CREATE TABLE and INSERT statements; It is very useful.
  Still, it would be more useful if the sample data and the results don't always have the same value in a column. I'm just guessing at what cid and get rid of play in this problem.
  Also, thanks for posting your request. It helps to understand the problem.

  For an explanation of the technique of Difference sets used in the above query, see {message: id = 9953384} and/or {message: id = 9956917}

  Published by: Frank Kulash, March 23, 2012 13:34

• Shifts start and end date

  Hello
  
  I have an obligation to make the fiscal quarters following the date of beginning and end given.
  For example if I have
  
  start date: 1 January 09
  end date: 31 December 09
  
  I divide it into 4 quarters as below:
  
  T1: 1 January 09-31 March 09
  Qtr2: 1 April 09-30 June 09
  Qtr3: 1 July 09-30 September 09
  Qtr4: 1st October 09-31 December 09
  
  Help, please.
  
  Kind regards
  Fahim

  Hello

  SQL> SELECT ADD_MONTHS(to_date('01-JAN-2008','DD-MON-YYYY'),(ROWNUM-1)*3) start_dt,(ADD_MONTHS(to_date('01-JAN-2008','DD-MON-YYYY'),ROWNUM*3))-1 End_Date
    2  FROM DUAL
    3  CONNECT BY ADD_MONTHS(to_date('01-JAN-2008','DD-MON-YYYY'),(LEVEL-1)*3) <=to_date('30-SEP-2009','DD-MON-YYYY');
  
  START_DT  END_DATE
  --------- ---------
  01-JAN-08 31-MAR-08
  01-APR-08 30-JUN-08
  01-JUL-08 30-SEP-08
  01-OCT-08 31-DEC-08
  01-JAN-09 31-MAR-09
  01-APR-09 30-JUN-09
  01-JUL-09 30-SEP-09
  
  7 rows selected.
  
  SQL>
  

  See you soon,.

• Find records overlapping start and end dates

  Hi all
  
  I have a table with begin and end date columns. I need to find the records that overlap with a few values in corresponding column.
  
  Table: MG_AUTH_AGNT
  -----
  ID
  MGATH_clnt
  MGATH_beg_DT
  MGATH_END_DT
  MGATH_SERV_GRP
  MGATH_STAT
  MGATH_TYP
  MGATH_NHIC_ERR_CD
  -----
  I need to find records containing dates that overlap.
  
  Examples of data
  -----
  
  If the customer has two records with the same MGATH_SERV_GRP, MGATH_STAT, MGATH_TYP and start and end dates of the first disc are 01/JAN/2009 AND 01 / JAN / 2009.
  start and end dates of second record are 15/JAN/2009 and 15/FEB/2009.
  Here are the dates overlap. with my select query, I should get these two recordings.
  
  I am using the following query. But it is too slow. Could you please suggest a better sql?
  ----------------------------------------------------------------------------------------------------------------------------------------------------------------------------
  
  Select MG_AUTH_AGNT m, MGATH_clnt, MGATH_beg_DT, MGATH_END_DT, MGATH_NHIC_ERR_CD, id where m.MGATH_SERV_GRP = '1' and m.MGATH_STAT = 'A' and MGATH_clnt = (select distinct MGATH_clnt of MG_AUTH_AGNT d where d.MGATH_SERV_GRP = m.MGATH_SERV_GRP and d.MGATH_TYP = m.MGATH_TYP and m.MGATH_CLNT = d.MGATH_CLNT and d.MGATH_STAT = m.MGATH_STAT and m.idd.id ((trunc (m.MGATH_beg_DT) & gt; = trunc (d.MGATH_beg_DT) and trunc (m.MGATH_beg_DT) & lt;=trunc(d.MGATH_END_DT)) or (trunc (m.MGATH_END_DT) & gt; = trunc (d.MGATH_beg_DT) and trunc (m.MGATH_END_DT) & lt; = trunc (d.MGATH_END_DT)) or (trunc (m.MGATH_beg_DT) & lt; = trunc (d.MGATH_beg_DT) and trunc (m.MGATH_END_DT) & gt; = trunc (d.MGATH_END_DT))) MGATH_clnt order MGATH_beg_DT
  
  Published by: user10727414 on March 17, 2009 01:36

  user10727414 wrote:
  My data is correct

  MGSRV_CLNT = MGSRV_BEG_DT = MGSRV_END_DT
  501184242 = 28-AUG-07 = 31-DEC-9999
  501184242 = 28-AUG-07 = 31-DEC-9999
  501184242 = 20-DEC-07 = 31-DEC-9999
  501184242 = 20-DEC-07 = 31-DEC-9999

  And we had to guess that a year of "99" was in fact "9999" were we? Hang on I'll go and dust off my crystal ball.

  Well, now we know the correct dates (?), we'll put that in the original request...

  SQL> ed
  Wrote file afiedt.buf
  
    1  with mypeople as
    2  (select 501184242 as id, to_date('28-AUG-2007','DD-MON-YYYY') as stdt, to_date('31-DEC-9999','DD-MON-YYYY') as endt from dual union all
    3   select 501184242, to_date('28-AUG-2007','DD-MON-YYYY'), to_date('31-DEC-9999','DD-MON-YYYY') from dual union all
    4   select 501184242, to_date('20-DEC-2007','DD-MON-YYYY'), to_date('31-DEC-9999','DD-MON-YYYY') from dual union all
    5   select 501184242, to_date('20-DEC-2007','DD-MON-YYYY'), to_date('31-DEC-9999','DD-MON-YYYY') from dual union all
    6   select 2, to_date('19/01/2009','DD/MM/YYYY'), to_date('24/01/2009','DD/MM/YYYY') from dual)
    7  -- END OF TEST DATA
    8  select id, stdt, endt
    9        ,case when lead(stdt) over (partition by id order by stdt,endt) <= endt
   10                or lag(endt) over (partition by id order by stdt,endt) >= stdt then 'Overlap'
   11              else 'Ok'
   12         end as status
   13  from mypeople
   14* order by id, stdt, endt
  SQL> /
  
          ID STDT      ENDT      STATUS
  ---------- --------- --------- -------
           2 19-JAN-09 24-JAN-09 Ok
   501184242 28-AUG-07 31-DEC-99 Overlap
   501184242 28-AUG-07 31-DEC-99 Overlap
   501184242 20-DEC-07 31-DEC-99 Overlap
   501184242 20-DEC-07 31-DEC-99 Overlap
  
  SQL>
  

  Looks like it works for me.

  If it does not work for you then maybe had better give us a statement of create table and insert to your data in the example statements then we can see what you're trying to do.

• I broke my screen, and now cannot drag to open it.  I have an alarm that don't go.  I also want to synchronize my phone before I take it buy a new one.  Is it possible to synchronize and watch my calendar for the next few days?

  I broke my screen, and now cannot drag to open it.  I have an alarm that don't go. I can let the battery die I know but I really want to be able to access and examine what are the texts I received today. I think that my ICloud is can be disabled. I also want to synchronize my phone before I take it buy a new one.  Is it possible to synchronize and watch my calendar for the next few days?

  Without entering your access code, it is not possible, unless your time is in iCloud. If this is the case, connect to iCloud.com to check your calendar.

  Good luck.

• I have windows xp and whenever I click on Installer Windows icon comes out and says it: preparation for the installation and it takes a while to come

  I have windows xp and whenever I click on an installer of winows icon comes out and says it: preparation for the installation and it takes a while to come

  Hi DanBourque

   

  1 does the problem occur when you click the icon of the exe file or any application shortcut icon as well?
  2. for how long have you been faced with this problem?

  3. did you of recent changes on the computer?

   

  You can re-register Windows Installer and check if this helps-
  a. Quit all Windows programs.
  b. click Start, click run, type msiexec /Unregister in the Open box and then click OK.
  c. click Start, click run, type msiexec/regserver in the Open box and then click OK.
  d. restart your computer.

  I hope this helps.

• The waiting time for the activation of the subscription of creative cloud?

  The waiting time for the activation of the subscription of creative cloud?

  Hi Evgeny,

  You can follow the article: solve common activation Adobe Creative Cloud (login) and questions (disconnect) disabling or error messages and errors in connection with Creative Suite and creative Cloud applications, activation and connection Solutions to resolve activation problems.

  Let us know if this solves the problem for you or not.

  Thank you

  Yann Arora