Choose the interface very slow partition

Similar Questions

• Access the disk very slow and steady

  Running VMWare Workstation v6.5.0-118166-Build, on Windows XP SP3 host (Dell Optiplex 755).  VM sessions are stored on internal 500 GB SATA 3 GB of disk.  After Windows XP SP3 is started in a virtual machine session, system response seems very slow; IE, by clicking on an icon takes several seconds to respond, launched apps take unusually long to load, etc.  Symptoms persist for several minutes after the start of the session XP.  Meanwhile, the indicator disk in VMWare Workstation shows status bar access the constant disk.

  I defraged the session, both within Windows and using the VMware Workstation defragmentation utility.

  Anyone have any ideas why this disk access continues for so long?

  Thank you

  Jack

  Yes, snapshots are, as well as all the contents of the folder of the virtual machine.

  Well, it seems that you have.  Using a virtual machine of independent origin identified the problem as long as the virtual machines themselves, who all had the same problem, because they inherited from their parent, all 46 chromosomes from the same source.

  So unless you want to determine what virtual machines is defective, you may be ready to mark this as a response.

• ISE Posture Windows enter password to view the desktop very slow

  Hello, had a problem of slowness that I don't know how to solve problems.  ISE 2.0 patch3, AnyConnect 4.3.02

  My setup is Anyconnect which is already on the computer windows laptop 10, EAP with TLS chaining for authentication of the host and PEAP for user auth.  ISE Posture checks for windows AV defs and AV windows install.  AnyConnect has 'start before logon' installed and * just work *.  Boots of the user, auths from the machine before the connection of the user, user logs in and ISE Posture check runs and passes.  The user gets the green checkmark on the line.

  With a little problem.  At the time wherever the user types the password and hit enter, the grip of the Welcome screen for about 45 to 60 seconds, a few rare occasions longer, my high water line is 1 minute 12 seconds.  Meanwhile machine auth and auth user spend with the unknown state of compliance in the live of the radius of ISE log.  Then welcome screen disappears and the bureau paints (finally), at this time, the machine cannot access anything on the network, 5 seconds later the Anyconnect client starts.  1 second later the bumps network connection, and the analysis of the Posture of ISE in the Anyconnect client starts.  Analysis of the Posture of the ISE takes about 7-10 seconds to complete.  After that everything is good and the user can access the network.

  If control of Posture of ISE is deleted, the whole process takes 10-15 seconds password entry the user to be able to use the laptop and access the internet.

  Does anyone have an idea whence this 'start delay '?  Feels like a timeout of some sort.  It happened on this latest version of the Anyconnect and 3 previous ones as well.  I concentrate on my test machine windows 10 laptop, but the same thing happened on 4 other test systems which are a mixture of windows 7, 8.1 and 10.  The 10 win test system is a lenovo x 1 carbon with an SSD and is normally fairly quick.

  All the tips are greatly appreciated.

  e-

  Do you have the port in a vlan to auth machine and then change once the machine and the user connects? Also, you will probably need to open any acl you apply while the posture is 'unknown '. It is usually due to some AD access that is blocked.

• Response of the mouse very slow in AutoCAD - Fusion 3

  I just installed a clean version of Fusion 3 and created a virtual machine with Windows 7.  After the installation of AutoCAD 2010, I have a big problem with the performance of the mouse.  The problem is that there is a significant delay in the reaction between the mouse and the pointer on the screen that I move it inside of the drawing space.  As soon as the pointer moves in the menu Ribbon above the drawing space, he moves normally.  It also moves normally in all other cases within the virtual machine.

  I read some messages describing the erratic movements of the mouse, but this isn't the case.  Any thoughts on how to solve this problem would be highly appreciated.  As it is, it's unmanageable.

  Thank you!

  MBP OS X 10.6

  2.53 GHz Intel Core 2 Duo

  4 GB OF RAM

  Fusion 3.0.1

  WIndows 7

  If the mouse is still a little slow with 'Never optimize the mouse for games' the problem is surely a generic graphic performance problem since then in the main window drawing autocad draws the cursor of the mouse as normal graphics rather than using the path of accelerated mouse that is generally used.

  I recommend to try changing the graphics settings in AutoCAD, try playing around with enabling/disabling 3d acceleration in AutoCAD if possible, otherwise you can try to change the global setting of virtual machine to toggle the 3d in Fusion.

• After the computer has been infected with virus win32/cutwail.BA computer is very slow at startup

  My computer is infected with this wirus and my wirus program can not take it away from the computer, it make the computer very slow at the beginning, what should I do?

  Hi Andersjohansson,

  Method 1: To fix the performance issue, follow the steps mentioned in the link below

  Optimize the performance of Microsoft Windows Vista

  http://support.Microsoft.com/kb/959062

  http://Windows.Microsoft.com/en-us/Windows-Vista/optimize-Windows-Vista-for-better-performance

  
  Method 2: if a Protection of resources Windows (WRP) file is missing or is damaged, Windows may not behave as expected. Auditor of file system (CFS) scan to fix all of the corrupted system files. To do this, follow the steps mentioned in the link below:

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

  http://support.Microsoft.com/kb/929833

  Method 3: Run Microsoft Security scanner (MSS) for any threat of remnant and try to correct

  http://www.Microsoft.com/security/scanner/en-us/default.aspx

  Note: Infected files can be deleted from your computer; There is a chance of data loss.

• HP 250 g3: laptop Very slow start

  Hello
  That I declare that I'm not an expert in computer science, but in my small way, I can arranciarmi.
  I got my 250 G3 AL windows 7 Ultimate 64-bit Hp laptop, connect to your site I have downloaded all the drivers I have appeared and is fully functional, with the help of the forum mail Reading SOME Reed.
  I never ask to come and start the laptop very slow? Is it normal?
  Then another thing, I can not find the audio softwere to change settings in order to be able to talk about what the Realtek. I included pictures of Device Manager

  

  @Pippo0516

  Thank you for visiting our English HP Support Forum. We are only able to respond to messages written in English. To ensure a fast response, it would be desirable to ask your question in English. The following links are here to help you if you want to post the following language Forum.

  German: HP Kundenforum
  Spanish: Foro of HP users
  French: Forum users
  Portuguese: Forum back HP users
  Chinese: 惠普个人客户支持论坛
  Korean: HP 지식커뮤니티

  Thanks for your understanding

• Very slow Preview app experience

  I find the experience very slow preview online, right now. It is an application, not DPS Preflight

  Without tapping the Preview button, the project that I'm getting is constantly "Preview" and taking more than an hour to fill the bar blue much like on the picture below.

  Pending the results of all of the changes take an age - and is not practical at all. You press 'Preview' and we hope that at some point, within 30 minutes, your changes to the maps, collections, layouts, etc. will appear on the device as a "update", but it is simply not the case. I'm on a high-speed network to a major publisher, so this isn't the issue.

  

  Still having this problem of slowness?

• Win2008r2 x 64 very slow VM running under Windows 7 Ultimate x 64

  I have searched in the nets and have seen similar problems. However, I just wanted to see if anyone has had the time to fix the issues that I am experiencing. Bascially,: the performance is so bad when you perform an initial installation developer that I shudder to think of what it will be like in normal use. You name: copies of the host is slow, running installs it variety takes an eternity, but the classic is when I installed windows 2008R2 x 64 has taken more than 6 hours to format the 80 GB drive, copy files across and complete the installation.

  In any case, I try to configure a 3.51 .NET / MOSS 2007 Developer of windows 2008R2 x 64 installation. I do this on a labtop to 2.2 Ghz AMD Turion X 2 recently acquired running Windows 7 Ultimate.x64. I have 4 GB of RAM and the usual WIFI Attheros. First of all, I chose VMWare Server 2.01 because it supports USB2 and 64-bit, instant clients while Virtual PC 2007 does ' t.

  Win2008R2 comments

  1. Memory of the VM value first 1 GB 2Gbto see if ifit makes much difference

  2. 2 vCPU

  3. CDROM installed

  4. VMWareTools... haven't tried to install it but page left summary seems to indicate I have not, not sure if it would substantially improve performance.

  5. Bridge networ_k_

  Things to try

  Looking at this networking wire Workstation 6.5 on Windows Vista x 64 host - bridged is broken! The performance of the network very slow folder shared! I should conider

  1. Check that in the laptop BIOS VT is enabled by default - I assumed it was.

  2. Reduction in the number of vCPUs to 1

  3. Drop the CDROM

  4. Ensure that VMWare Tools is fully installed

  5. Deactivation of windows 7 next host card connection network Local - & gt; Configure - & gt; Properties - & gt; Advanced: Large Send Offload v2 (IPv4) and Large Send Offload v2 (IPv6). Remember I'm toward the life of a wifi connection, so this may or may not have any effect

  6. Anything else anyone can think please...?

  I guess I just need some advice to help solve this painful problem, as it is to distract me from what I should do on the guest o/s...

  If you have done nothing yet, try first assign to VM 1 GB and 1 vCPU. Do never set more than 50% of memory available VM vive.

  About RDP: it connects OK? Check the system logs and firewall.

  StarWind Software R & D

  http://www.starwindsoftware.com

• Using Acrobat Pro and what impression on network printer it prints very slow. I have found that if we choose to print the image works fine. But how do I print as image remains for all of my PDF files. I have to choose each time now and it's not always r

  Using Acrobat Pro and what impression on network printer it prints very slow. I have found that if we choose to print the image works fine. But how do I print as image remains for all of my PDF files. I have to choose every time now and that is not always known.

  Hi jeans37547790,

  Please do mention it below as follows to change the settings:

  Open Acrobat > click file > print > click on advanced > and check the box that says "Print as Image".

  Here is the screenshot:

  .

  

  Let us know if you face any problem.

  Thank you!

  Shivam

• After the malware problem, firefox is very slow, even though I uninstalled it twice.

  I have a malware problem. I have restored the windows and installed the Malwarebytes program. Also, I deleted the registry. After that, I send using firefox. However the mozila was very slow but not internet explore.
  Then, I uninstalled and installed mozila twice but the problem remains.

  Please try to run AdwCleaner and see if Firefox accelerates. If this does not help, try the following steps.

  Some Firefox problems can be solved by performing a clean reinstall. This means that you remove Firefox program files, and then reinstall Firefox. Please follow these steps:

  Note: You can print these steps or consult them in another browser.

  1. Download the latest version of Firefox from mozilla.org office (or choose the download for your operating system and language on this page) and save the file to install it on your computer.
  2. Once the download is complete, close all Firefox Windows (or open the Firefox menu

     

     Click the close button

     

     ).

  3. Remove the Firefox installation folder, which is located in one of these locations, by default:
     • Windows:
       • C:\Program Files\Mozilla Firefox
       • C:\Program Files (x 86) \Mozilla Firefox
     • Mac: Delete Firefox in the Applications folder.
     • Linux: If you have installed Firefox with the distribution-based package manager, you must use the same way to uninstall: see Install Firefox on Linux. If you have downloaded and installed the binary package from the Firefox download page, simply remove the folder firefox in your home directory.
  4. Now, go ahead and reinstall Firefox:
     1. Double-click on the downloaded Setup file and go through the steps in the installation wizard.
     2. Once the wizard is completed, click to open Firefox directly after clicking the Finish button.

  More information on the resettlement of Firefox can be found here.

  WARNING: Do not use an uninstaller to third parties as part of this process. This could permanently delete your Firefox profile data, including but not limited to, extensions, cache, cookies, bookmarks, personal settings and passwords saved. They can be retrieved easily unless they have been backed up on an external device! See back up and restore the information contained in the profiles of Firefox.

  Please report to say if this helped you!

• After update for HP UPD PCL 5 on the network drivers, local printers now very slow printing

  I've recently updated the HP Universal Print Driver PCL 5 on my Windows 2008 R2 file and print server.  All printers on network HP 5 now show the new driver of the UPD PCL 5, and 5 all seems to work fine from all clients on the attached network.

  However, as soon as I had updated the drivers from server, anyone with a printer connected locally HP began to test response times very slow when trying to print jobs to their local printer or even bring up the properties of the local printer.  I think that it is because local printers also use the HP UPD PCL5 driver, and something "broke" when I updated the driver on the server.   If the local printer is set as default, trying to make it appear a Properties dialog box takes several seconds (before it was instant), and clicking PRINT in any application results in a noticeable delay for the print dialog box to appear, followed by another notable delay (as in 10-20 seconds) before work is treated and control the application returned ot the user.  The printer takes then to another a few seconds to process work.  Essentially print jobs local just went from 5 seconds to 30 seconds or more for each task to start to print more.  This is unacceptable.

  I tried to remove all printers on network among the PC client, and then deleting the local printer as well.  I restarted, then used the install.exe HP UPD PCL 5 to start the installation on the local computer, choosing to do an installation of USB.  I turned on the printer local return and it has been recognized and loaded the new HP UPD PCL5 driver, but the problem persists.

  So after messing around with this more yesterday I think I narrowed down it to a port number.  It seems that when computers with local printers connected downloaded the new UPD PCL 5 form the network (updated their drivers for network printer), he reconfigured the USB port for each printer connected locally.  The USB port on the local printer will now appear as "DOT4 generic IEEE 1284.4 support printing", while before I'm pretty sure he showed as "DOT4 HP Laserjet one."   This white paper (which is unfortunately for Windows XP) appears to support the hypothesis that the port has changed and that the generic port is much slower (this is what we see now with local printers).  White paper on the issue of generic DOT4 port

  I tried to delete all printers that use the UPD from a local system and then using the install.exe form the UPD package to install the local printer as a USB printer (disconnection of the latter before installation and then in reconnecting it when you are prompted by Setup), still the same generic port is re-created.  How can I change the generic port to a specific port HP driver for printers normally respond again?

  Furthermore, I opened a ticket with the help of HP on the issue Monday afternoon, it is now Wednesday morning and the only response I received was a request to make sure that my cables were not more than 6' long.  Seriously HP support?

  My best guess is that you do not use the name of specific driver to the version on the print server.   Driver version-specific name will look like "HP Universal printing PCL6 (v5.9.0).   Non-specific to the version name will look like "HP Universal PCL6 print.

  When you work with print servers, it is recommended to use the name of the version-specifc driver.   I think what happened here are that the driver has been updated on the server, and this update was then pushed to clients through point and print because the pilots names.

  You have indicated that you are using the PCL5 driver.   In a general office print PCL6 offers the best combination of performance and print quality.   I recommend you go to PCL6 immediately, unless your devices or custom applications/solutions are not compatible with PCL6.  (This is very rare)

  If it were my system, here's what I'd do.

  1. Download UPD PCL6 5.9.0 and PARK of www.hp.com/go/upd
  2. Install the UPD PCL6 5.9.0 on my print server using the name specific to the version - create a temporary queue.
  3. Run AutoUpgradeUPD.exe from the PARK to remove queues existing impression on my print server and re-create them with the PCL6 driver.   (See http://youtu.be/mYCVx1RBp9w for more information on this utility)
  4. Remove the temporary queue
  5. On my clients, I would remove the existing printer USB connections.
  6. Run the UPD PCL6 5.9.0 installer and select the USB - Plug and Play mode and make sure that both check boxes are enabled.
  7. Re-connect local printers.

  Something else I could try to implement PRNCON of the PARK on each client.    It will be delete and re-create the connections to printer to the print server.    This can be run without command-line switches, but I like to use the '-2000 w' command to force a second 2 the delay between the removal of the printer connection and recreate.

  In a last time, I'll make sure to remove any old/unused drivers from the print server.

• PMC-GPIB with NOR-488 DDK very slow when sending the commands-GPIB

  Hello

  I use a PMC-GPIB Board and the NOR-488DDK allows to develop a GPIB Interface with VxWorks. Already, it works correctly, but sending a GPIB command takes about 100 ms, which is very slow.

  Are there opportunities to speed up data transfer?

  Hello again,

  I found a solution to my problem! I realized that the command execution is related to the vxWorks system clock! Of course, this is done in the DDK (driver development kit).

  The system clock is easily adjustable upper and then orders are shipped quickly.

  Thanks for your time

  Good day

  Cassidian

• PC became very very slow after installing Microsoft essentials and upgraded to the latest

  After I installed and update Microsoft essentials, my pc has become very very slow, Microsoft XP Professional. Please help correct, this will drive me up the WALL higher. Thanx

  No AV program is 100% foolproof, but I love MSE, and I run it on my xp system. Having two AV programs running at the same time is the cause of conflict and slow down your computer. You must make a choice on which you prefer and uninstall the other.  If you decide to choose MSE, download a free copy of Malwarebytes AV to use as a backup scanner. then run MSE for real-time protection.

  MALWAREBYTES

  http://www.Malwarebytes.org/products/malwarebytes_free/

  Of AVG removal tool.

  http://www.Avg.com/us-en/utilities

  Good luck.

• Sometimes my wireless connection is very slow. Our people at work said there must be a lot of people in my neighborhood picky backup me & that I need to put a password on the router.

  sometimes working wireless on my laptop is very slow. Our people at work said there must be a lot of people in my neighborhood picky backup me & that I need to put a password on the router. How can I do this?

  original title: addition of router password?

  The manual is expected to be online. If you have pain to find - know everyone here the brand name and model - it is likely that someone here can help more.

  Basically connect to the interface web (usually via http://192.168.1.1 or http://192.168.0.1 web page with the username "admin") and change the password in the configuration / administrative to something (I suggest 15 + characters including letters - upper and lower case, numbers and symbols) and then find the wireless configuration and change the password for it to something other than the administrative password - but with the same suggestion.  If she uses WEP and you have all the relatively new devices (all purchased in the last 7 years) then I suggest change you in WPA.  If possible, replace WPA2.

  Probably there is also a place where you can see who is connected.

  What type of Internet connection you are paying for?  (Include numbers upstream and downstream, given to you by the service provider and the type...)

• Clean up unwanted files, the computer is very slow

  The computer is very slow.  Scan says that junk Files are full.  How to clean unwanted files?

  Hello.

  Click on this link: http://www.scanwith.com/Autoruns_download.htm download & install it. (It is a secure reliable software). You can keep it for future use if you choose.
  1. after the download is complete, select autoruns & right click on it
  2. click on "extract here".
  3. on the extracted files, click "autoruns" application select it & right click and click"Openorrun"& click OK or Yes if the process of ptompted by an administrator to complete the installation.
  4. what which is complete, Open or run "autoruns".
  5. in the opened window, click 'all'.
  6. on all programs that says 'file not found' select each & every one of them, click on one at a time...
  7 right-click & click delete & ok

  And then:

  Just click on the link here:http://www.piriform.com/download select & download it.

  step (1) when finished downloading, click CCleanersetup & run the SETUP & INSTALL IT

  step (2) make a right click on it, click "Open or install" select ok or Yes if asked by the administrator.

  step (3) when you have finished open or run the CCleaner

  full market (4) on the open window of CCleaner, the word "windows" in the upper left corner of the screen, the check box everything except 'THE WIPE FREE SPACE' (leave this box clear)

  Step (5) click on 'applications' (next to windows) & case "alone".

  (6) level in the lower right corner of the window of CCleaner click "run cleaner" a new window will open, and then click ok.

  step (7) when the cleaning is finished, close all files, restart your computer and see if it works!

  If the problem persists, there are more ways to solve this problem!

  PS: Click 'YES' If this was helpful or respond to get help.

  He helped?